Subject: Re[4]: e1000 speed/duplex error

From: a1 <[email-masked]>
Date: Tue, 1 Aug 2006 16:20:06 +0400

Hi, Jeff.

JK> OPTION 2: Turn auto-negotiate on the e1000 card and tell it to only
JK> advertise 100 Full Duplex.  This will allow negotiation between the
JK> two lnk partners and the e1000 will advertise that it is only able to
JK> do 100 Full duplex.

Is there any way i could do this with ethtool? It only allows force
spd/dplx , but not set it for advertising...

If i do as follows other side reports 1000/FD:

ethtool -s eth0 speed 100 duplex full autoneg on

-- 
Best Regards,
 a1                          mailto:[email-masked]