From: Stephen Hemminger <stephen.hemminger-ZtmgI6mnKB3QT0dZR+AlfA@public•gmane.org>
To: "Winkler,
Tomas" <tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public•gmane.org>,
Stephen Hemminger
<shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public•gmane.org>,
Johannes Berg <johannes-cdvu00un1VgdHxzADdlk8Q@public•gmane.org>
Cc: "davem-fT/PcQaiUtIeIZ0/mPfg9Q@public•gmane.org"
<davem-fT/PcQaiUtIeIZ0/mPfg9Q@public•gmane.org>,
"netdev-u79uwXL29TY76Z2rM5mHXA@public•gmane.org "
<netdev-u79uwXL29TY76Z2rM5mHXA@public•gmane.org>,
"linux-wireless-u79uwXL29TY76Z2rM5mHXA@public•gmane.org "
<linux-wireless-u79uwXL29TY76Z2rM5mHXA@public•gmane.org>
Subject: RE: [PATCH net-2.6] bridge: fix br_multicast_ipv6_rcv for paged skbs
Date: Thu, 30 Dec 2010 15:06:16 -0800 [thread overview]
Message-ID: <9mk4bme8o97ir27xi8a9fbsd.1293750376929@email.android.com> (raw)
Although copy is slower for large packets, this is a non performance path. The code in question is for bridged multicast Ipv6 ICMP packets. This case is so uncritical it could be done in BASIC and no one could possibly care!
"Winkler, Tomas" <tomas.winkler@intel•com> wrote:
>
>
>> -----Original Message-----
>> From: Stephen Hemminger [mailto:shemminger@vyatta•com]
>> Sent: Thursday, December 30, 2010 9:06 PM
>> To: Johannes Berg
>> Cc: Winkler, Tomas; davem@davemloft•net; netdev@vger•kernel.org; linux-
>> wireless@vger•kernel.org
>> Subject: Re: [PATCH net-2.6] bridge: fix br_multicast_ipv6_rcv for paged
>> skbs
>>
>> On Thu, 30 Dec 2010 19:52:14 +0100
>> Johannes Berg <johannes@sipsolutions•net> wrote:
>>
>> > On Thu, 2010-12-30 at 10:46 -0800, Stephen Hemminger wrote:
>> >
>> > > This doesn't look correct. The calculation of the offset doesn't look
>> correct.
>> > > Just following the skb_clone(), the skb_pull value is "offset".
>> > > Also, the other checks return -EINVAL for incorrectly formed packet.
>> > >
>> > > --- a/net/bridge/br_multicast.c 2010-12-30 10:29:58.579510488 -0800
>> > > +++ b/net/bridge/br_multicast.c 2010-12-30 10:43:27.273386691 -0800
>> > > @@ -1464,6 +1464,9 @@ static int br_multicast_ipv6_rcv(struct
>> > > if (offset < 0 || nexthdr != IPPROTO_ICMPV6)
>> > > return 0;
>> > >
>> > > + if (!pskb_may_pull(skb, offset))
>> > > + return -EINVAL;
>> > > +
>> > > /* Okay, we found ICMPv6 header */
>> > > skb2 = skb_clone(skb, GFP_ATOMIC);
>> > > if (!skb2)
>> >
>> > Wouldn't that make more sense after the clone anyway? But if you look at
>> > my email, you'll find that there's potentially, and conditionally, more
>> > stuff that will be read from the skb's header, which hasn't necessarily
>> > been pulled in, so I think this still won't fix all the issues.
>> >
>> > Seeing how this only affects some ICMPv6 packets, maybe we should just
>> > use skb_copy() instead?
>>
>> It comes out cleaner, and the check can be simplified.
>>
>> --- a/net/bridge/br_multicast.c 2010-12-30 10:47:12.031733855 -0800
>> +++ b/net/bridge/br_multicast.c 2010-12-30 11:00:12.135801266 -0800
>> @@ -1465,19 +1465,19 @@ static int br_multicast_ipv6_rcv(struct
>> return 0;
>>
>> /* Okay, we found ICMPv6 header */
>> - skb2 = skb_clone(skb, GFP_ATOMIC);
>> + skb2 = skb_copy(skb, GFP_ATOMIC);
>> if (!skb2)
>> return -ENOMEM;
>>
>> + err = -EINVAL;
>> + if (skb2->len < offset + sizeof(*icmp6h))
>> + goto out;
>> +
>> len -= offset - skb_network_offset(skb2);
>>
>> __skb_pull(skb2, offset);
>> skb_reset_transport_header(skb2);
>>
>> - err = -EINVAL;
>> - if (!pskb_may_pull(skb2, sizeof(*icmp6h)))
>> - goto out;
>> -
>> icmp6h = icmp6_hdr(skb2);
>>
>> switch (icmp6h->icmp6_type) {
>>
>>
>Sorry for dump question but isn't there performance penalty on using skb_copy vs. skb_clone?
>
>Anyhow Below is a code snippet from ip6_input.c so you probably would want to fix it all over.
>BTW offset and the pointer arithmetic really gives the same number +1, I'm not surly why the original author would thought it be safer than just using offset.
>
> offset = ipv6_skip_exthdr(skb, sizeof(*hdr),
> &nexthdr);
> if (offset < 0)
> goto out;
>
> if (nexthdr != IPPROTO_ICMPV6)
> goto out;
>
> if (!pskb_may_pull(skb, (skb_network_header(skb) +
> offset + 1 - skb->data)))
> goto out;
>
> icmp6 = (struct icmp6hdr *)(skb_network_header(skb) + offset);
>
>
>
>Thanks
>Tomas
>
>
>---------------------------------------------------------------------
>Intel Israel (74) Limited
>
>This e-mail and any attachments may contain confidential material for
>the sole use of the intended recipient(s). Any review or distribution
>by others is strictly prohibited. If you are not the intended
>recipient, please contact the sender and delete all copies.
>
next reply other threads:[~2010-12-30 23:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-30 23:06 Stephen Hemminger [this message]
[not found] ` <9mk4bme8o97ir27xi8a9fbsd.1293750376929-2ueSQiBKiTY7tOexoI0I+QC/G2K4zDHf@public.gmane.org>
2010-12-30 23:29 ` [PATCH net-2.6] bridge: fix br_multicast_ipv6_rcv for paged skbs Winkler, Tomas
[not found] ` <6F5C1D715B2DA5498A628E6B9C124F04019BF36ABD-KS4eWWg9cz+vNW/NfzhIbrfspsVTdybXVpNB7YpNyf8@public.gmane.org>
2010-12-31 10:18 ` Johannes Berg
2010-12-31 20:45 ` David Miller
2010-12-31 21:16 ` Winkler, Tomas
-- strict thread matches above, loose matches on Subject: below --
2010-12-29 16:12 BUG: while bridging Ethernet and wireless device: Tomas Winkler
2010-12-30 11:32 ` [PATCH net-2.6] bridge: fix br_multicast_ipv6_rcv for paged skbs Tomas Winkler
2010-12-30 18:46 ` Stephen Hemminger
2010-12-30 18:52 ` Johannes Berg
[not found] ` <1293735134.21956.1.camel-8upI4CBIZJIJvtFkdXX2HixXY32XiHfO@public.gmane.org>
2010-12-30 19:06 ` Stephen Hemminger
2010-12-30 21:00 ` Winkler, Tomas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9mk4bme8o97ir27xi8a9fbsd.1293750376929@email.android.com \
--to=stephen.hemminger-ztmgi6mnkb3qt0dzr+alfa@public$(echo .)gmane.org \
--cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public$(echo .)gmane.org \
--cc=johannes-cdvu00un1VgdHxzADdlk8Q@public$(echo .)gmane.org \
--cc=linux-wireless-u79uwXL29TY76Z2rM5mHXA@public$(echo .)gmane.org \
--cc=netdev-u79uwXL29TY76Z2rM5mHXA@public$(echo .)gmane.org \
--cc=shemminger-ZtmgI6mnKB3QT0dZR+AlfA@public$(echo .)gmane.org \
--cc=tomas.winkler-ral2JQCrhuEAvxtiuMwx3w@public$(echo .)gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox