Subject: [PATCH net-next 03/10] net: stmmac: clean up passing fwnode to phylink

From: "Russell King (Oracle)" <[email-masked]>
Date: Thu, 24 Aug 2023 14:38:03 +0100

Move the initialisation of the fwnode variable closer to its use
site, rather than scattered throughout stmmac_phy_setup().

Signed-off-by: Russell King (Oracle) <[email-masked]>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a2dfb624e10c..7d97166194b5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1200,9 +1200,9 @@ static int stmmac_init_phy(struct net_device *dev)
 static int stmmac_phy_setup(struct stmmac_priv *priv)
 {
 	struct stmmac_mdio_bus_data *mdio_bus_data = priv->plat->mdio_bus_data;
-	struct fwnode_handle *fwnode = priv->plat->port_node;
 	int max_speed = priv->plat->max_speed;
 	int mode = priv->plat->phy_interface;
+	struct fwnode_handle *fwnode;
 	struct phylink *phylink;
 
 	priv->phylink_config.dev = &priv->dev->dev;
@@ -1211,9 +1211,6 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 		priv->phylink_config.ovr_an_inband =
 			mdio_bus_data->xpcs_an_inband;
 
-	if (!fwnode)
-		fwnode = dev_fwnode(priv->device);
-
 	/* Set the platform/firmware specified interface mode */
 	__set_bit(mode, priv->phylink_config.supported_interfaces);
 
@@ -1254,6 +1251,10 @@ static int stmmac_phy_setup(struct stmmac_priv *priv)
 			~(MAC_10HD | MAC_100HD | MAC_1000HD);
 	priv->phylink_config.mac_managed_pm = true;
 
+	fwnode = priv->plat->port_node;
+	if (!fwnode)
+		fwnode = dev_fwnode(priv->device);
+
 	phylink = phylink_create(&priv->phylink_config, fwnode,
 				 mode, &stmmac_phylink_mac_ops);
 	if (IS_ERR(phylink))
-- 
2.30.2