Subject: [PATCH net-next 3/4] net: phylink: remove .validate() method

From: "Russell King (Oracle)" <[email-masked]>
Date: Mon, 16 Oct 2023 16:43:03 +0100

The MAC .validate() method is no longer used, so remove it from the
phylink_mac_ops structure, and remove the callsite in
phylink_validate_mac_and_pcs().

Signed-off-by: Russell King (Oracle) <[email-masked]>
---
 Documentation/networking/sfp-phylink.rst |  5 ----
 drivers/net/phy/phylink.c                | 16 ++++------
 include/linux/phylink.h                  | 38 ------------------------
 3 files changed, 6 insertions(+), 53 deletions(-)

diff --git a/Documentation/networking/sfp-phylink.rst b/Documentation/networking/sfp-phylink.rst
index b069d34d7f5c..8054d33f449f 100644
--- a/Documentation/networking/sfp-phylink.rst
+++ b/Documentation/networking/sfp-phylink.rst
@@ -207,11 +207,6 @@ this documentation.
    capabilities for ``interface`` to determine the allowable ethtool link
    modes.
 
-   The :c:func:`validate` method should mask the supplied supported mask,
-   and ``state->advertising`` with the supported ethtool link modes.
-   These are the new ethtool link modes, so bitmask operations must be
-   used. For an example, see ``drivers/net/ethernet/marvell/mvneta.c``.
-
    The :c:func:`mac_link_state` method is used to read the link state
    from the MAC, and report back the settings that the MAC is currently
    using. This is particularly important for in-band negotiation
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index f5c2ba15d701..1c7e73fa58e4 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -697,17 +697,13 @@ static int phylink_validate_mac_and_pcs(struct phylink *pl,
 	}
 
 	/* Then validate the link parameters with the MAC */
-	if (pl->mac_ops->validate) {
-		pl->mac_ops->validate(pl->config, supported, state);
-	} else {
-		if (pl->mac_ops->mac_get_caps)
-			capabilities = pl->mac_ops->mac_get_caps(pl->config,
-							state->interface);
-		else
-			capabilities = pl->config->mac_capabilities;
+	if (pl->mac_ops->mac_get_caps)
+		capabilities = pl->mac_ops->mac_get_caps(pl->config,
+							 state->interface);
+	else
+		capabilities = pl->config->mac_capabilities;
 
-		phylink_validate_mask_caps(supported, state, capabilities);
-	}
+	phylink_validate_mask_caps(supported, state, capabilities);
 
 	return phylink_is_empty_linkmode(supported) ? -EINVAL : 0;
 }
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 0798198a09ef..0cf559bae1ff 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -227,7 +227,6 @@ void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
 
 /**
  * struct phylink_mac_ops - MAC operations structure.
- * @validate: Validate and update the link configuration.
  * @mac_get_caps: Get MAC capabilities for interface mode.
  * @mac_select_pcs: Select a PCS for the interface mode.
  * @mac_prepare: prepare for a major reconfiguration of the interface.
@@ -239,9 +238,6 @@ void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
  * The individual methods are described more fully below.
  */
 struct phylink_mac_ops {
-	void (*validate)(struct phylink_config *config,
-			 unsigned long *supported,
-			 struct phylink_link_state *state);
 	unsigned long (*mac_get_caps)(struct phylink_config *config,
 				      phy_interface_t interface);
 	struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config,
@@ -261,40 +257,6 @@ struct phylink_mac_ops {
 };
 
 #if 0 /* For kernel-doc purposes only. */
-/**
- * validate - Validate and update the link configuration
- * @config: a pointer to a &struct phylink_config.
- * @supported: ethtool bitmask for supported link modes.
- * @state: a pointer to a &struct phylink_link_state.
- *
- * Clear bits in the @supported and @state->advertising masks that
- * are not supportable by the MAC.
- *
- * Note that the PHY may be able to transform from one connection
- * technology to another, so, eg, don't clear 1000BaseX just
- * because the MAC is unable to BaseX mode. This is more about
- * clearing unsupported speeds and duplex settings. The port modes
- * should not be cleared; phylink_set_port_modes() will help with this.
- *
- * When @config->supported_interfaces has been set, phylink will iterate
- * over the supported interfaces to determine the full capability of the
- * MAC. The validation function must not print errors if @state->interface
- * is set to an unexpected value.
- *
- * When @config->supported_interfaces is empty, phylink will call this
- * function with @state->interface set to %PHY_INTERFACE_MODE_NA, and
- * expects the MAC driver to return all supported link modes.
- *
- * If the @state->interface mode is not supported, then the @supported
- * mask must be cleared.
- *
- * This member is optional; if not set, the generic validator will be
- * used making use of @config->mac_capabilities and
- * @config->supported_interfaces to determine which link modes are
- * supported.
- */
-void validate(struct phylink_config *config, unsigned long *supported,
-	      struct phylink_link_state *state);
 /**
  * mac_get_caps: Get MAC capabilities for interface mode.
  * @config: a pointer to a &struct phylink_config.
-- 
2.30.2