Subject: Re: [PATCH] net: mtk_sgmii: implement mtk_pcs_ops

From: "Russell King (Oracle)" <[email-masked]>
Date: Tue, 18 Oct 2022 17:39:01 +0100

Hi,

A couple of points:

On Tue, Oct 18, 2022 at 05:35:06PM +0200, Frank Wunderlich wrote:
> diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
> index 736839c84130..9614973fd9c4 100644
> --- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
> +++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
> @@ -122,10 +122,25 @@ static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
>  	regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
>  }
>  
> +static void mtk_pcs_get_state(struct phylink_pcs *pcs, struct phylink_link_state *state)
> +{
> +	struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs);
> +	unsigned int val;
> +
> +	regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
> +	state->speed = val & RG_PHY_SPEED_3_125G ? SPEED_2500 : SPEED_1000;
> +
> +	regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
> +	state->an_complete = !!(val & SGMII_AN_COMPLETE);
> +	state->link = !!(val & SGMII_LINK_STATYS);
> +	state->pause = 0;

Finally, something approaching a reasonable implementation for this!
Two points however:
1) There's no need to set state->pause if there is no way to get that
   state.
2) There should also be a setting for state->pause.

> +}
> +
>  static const struct phylink_pcs_ops mtk_pcs_ops = {
>  	.pcs_config = mtk_pcs_config,
>  	.pcs_an_restart = mtk_pcs_restart_an,
>  	.pcs_link_up = mtk_pcs_link_up,
> +	.pcs_get_state = mtk_pcs_get_state,

Please keep this in order - pcs_get_state should be just before
pcs_config.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!