Subject: [PATCH] net: fec: fix conversion to gpiod API

From: Dmitry Torokhov <[email-masked]>
Date: Tue, 31 Jan 2023 14:48:15 -0800

The reset line is optional, so we should be using
devm_gpiod_get_optional() and not abort probing if it is not available.
Also, gpiolib already handles phy-reset-active-high, continuing handling
it directly in the driver when using gpiod API results in flipped logic.

While at this convert phy properties parsing from OF to generic device
properties to avoid #ifdef-ery.

Fixes: 468ba54bd616 ("fec: convert to gpio descriptor")
Signed-off-by: Dmitry Torokhov <[email-masked]>
---
 drivers/net/ethernet/freescale/fec_main.c | 36 ++++++++---------------
 1 file changed, 12 insertions(+), 24 deletions(-)

diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c
index 2716898e0b9b..c2b54a31541e 100644
--- a/drivers/net/ethernet/freescale/fec_main.c
+++ b/drivers/net/ethernet/freescale/fec_main.c
@@ -27,6 +27,7 @@
 #include <linux/string.h>
 #include <linux/pm_runtime.h>
 #include <linux/ptrace.h>
+#include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/ioport.h>
 #include <linux/slab.h>
@@ -65,6 +66,7 @@
 #include <linux/prefetch.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include <linux/property.h>
 #include <soc/imx/cpuidle.h>
 #include <linux/filter.h>
 #include <linux/bpf.h>
@@ -4032,42 +4034,38 @@ static int fec_enet_init(struct net_device *ndev)
 	return ret;
 }
 
-#ifdef CONFIG_OF
 static int fec_reset_phy(struct platform_device *pdev)
 {
 	struct gpio_desc *phy_reset;
-	bool active_high = false;
 	int msec = 1, phy_post_delay = 0;
-	struct device_node *np = pdev->dev.of_node;
 	int err;
 
-	if (!np)
-		return 0;
-
-	err = of_property_read_u32(np, "phy-reset-duration", &msec);
+	err = device_property_read_u32(&pdev->dev, "phy-reset-duration", &msec);
 	/* A sane reset duration should not be longer than 1s */
 	if (!err && msec > 1000)
 		msec = 1;
 
-	err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay);
+	err = device_property_read_u32(&pdev->dev, "phy-reset-post-delay",
+				       &phy_post_delay);
 	/* valid reset duration should be less than 1s */
 	if (!err && phy_post_delay > 1000)
 		return -EINVAL;
 
-	active_high = of_property_read_bool(np, "phy-reset-active-high");
-
-	phy_reset = devm_gpiod_get(&pdev->dev, "phy-reset",
-			active_high ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW);
+	phy_reset = devm_gpiod_get_optional(&pdev->dev, "phy-reset",
+					    GPIOD_OUT_HIGH);
 	if (IS_ERR(phy_reset))
 		return dev_err_probe(&pdev->dev, PTR_ERR(phy_reset),
-				     "failed to get phy-reset-gpios\n");
+				     "failed to request phy-reset-gpios\n");
+
+	if (!phy_reset)
+		return 0;
 
 	if (msec > 20)
 		msleep(msec);
 	else
 		usleep_range(msec * 1000, msec * 1000 + 1000);
 
-	gpiod_set_value_cansleep(phy_reset, !active_high);
+	gpiod_set_value_cansleep(phy_reset, 0);
 
 	if (!phy_post_delay)
 		return 0;
@@ -4080,16 +4078,6 @@ static int fec_reset_phy(struct platform_device *pdev)
 
 	return 0;
 }
-#else /* CONFIG_OF */
-static int fec_reset_phy(struct platform_device *pdev)
-{
-	/*
-	 * In case of platform probe, the reset has been done
-	 * by machine code.
-	 */
-	return 0;
-}
-#endif /* CONFIG_OF */
 
 static void
 fec_enet_get_queue_num(struct platform_device *pdev, int *num_tx, int *num_rx)
-- 
2.39.1.456.gfc5497dd1b-goog

-- 
Dmitry