Subject: Re: [PATCH 5/5] arm64: dts: qcom: msm8916: Enable modem and WiFi

From: Bjorn Andersson <[email-masked]>
Date: Thu, 18 Mar 2021 09:50:52 -0500

On Mon 15 Mar 07:01 CDT 2021, Bryan O'Donoghue wrote:

> On 12/03/2021 00:33, Bjorn Andersson wrote:
> > Enable the modem and WiFi subsystems and specify msm8916 specific
> > firmware path for these and the WCNSS control service.
> > 
> > Signed-off-by: Bjorn Andersson <[email-masked]>
> > ---
> >   arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
> >   arch/arm64/boot/dts/qcom/msm8916.dtsi     |  2 +-
> >   2 files changed, 13 insertions(+), 1 deletion(-)
> > 
> > diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > index 6aef0c2e4f0a..448e3561ef63 100644
> > --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> > @@ -305,6 +305,12 @@ &mdss {
> >   	status = "okay";
> >   };
> > +&mpss {
> > +	status = "okay";
> > +
> > +	firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
> > +};
> > +
> >   &pm8916_resin {
> >   	status = "okay";
> >   	linux,code = <KEY_VOLUMEDOWN>;
> > @@ -312,6 +318,8 @@ &pm8916_resin {
> >   &pronto {
> >   	status = "okay";
> > +
> > +	firmware-name = "qcom/msm8916/wcnss.mbn";
> >   };
> 
> On Debian I have to do this
> 
> 
> index 2a6a23cb14ca..597cdc8f51cc 100644
> --- a/drivers/remoteproc/qcom_wcnss.c
> +++ b/drivers/remoteproc/qcom_wcnss.c
> @@ -33,7 +33,7 @@
>  #include "qcom_wcnss.h"
> 
>  #define WCNSS_CRASH_REASON_SMEM                422
> -#define WCNSS_FIRMWARE_NAME            "wcnss.mdt"
> +#define WCNSS_FIRMWARE_NAME            "qcom/msm8916/wcnss.mdt"
> 
> so I guess wcnss_probe() -> rproc_alloc() wants this fix too.
> 

Can you confirm that you're saying that you want below patch, which I
just merged?

https://lore.kernel.org/linux-remoteproc/[email-masked]/

(Which makes it possible to specify firmware name per platform/board)

Regards,
Bjorn