Subject: Re: stmmac: zero udp checksum

From: Andrew Lunn <[email-masked]>
Date: Mon, 5 Apr 2021 18:42:53 +0200

> But was is still a bit strange to me is that it seems like the stmmac driver
> behaves different than other ethernet drivers which do not drop UDP packets
> with zero checksums when rx checksumming is enabled.

To answer that, you need somebody with more knowledge of the stmmac
hardware. It is actually quite hard to do. It means you need to parse
more of the frame to determine if the frame contains a VXLAN
encapsulated frame. Probably the stmmac cannot do that. It sees the
checksum is wrong and drops the packet.

Have you looked at where it actually drops the packet?
Is it one of

https://elixir.bootlin.com/linux/latest/source/drivers/net/ethernet/stmicro/stmmac/norm_desc.c#L95

or

https://elixir.bootlin.com/linux/latest/source/drivers/net/ethernet/stmicro/stmmac/enh_desc.c#L87

It could be, you need to see if the checksum has fail, then check if
the checksum is actually zero, and then go deeper into the frame and
check if it is a vxlan frame. It could be the linux software checksum
code knows about this vxlan exception, so you can just run that before
deciding to drop the frame.

	Andrew