Subject: Re: [RFC PATCH net-next v3 10/20] net: dsa: qca8k: add priority tweak to qca8337 switch

From: Andrew Lunn <[email-masked]>
Date: Wed, 5 May 2021 02:53:02 +0200

On Wed, May 05, 2021 at 12:29:04AM +0200, Ansuel Smith wrote:
> The port 5 of the ar8337 have some problem in flood condition. The
> original legacy driver had some specific buffer and priority settings
> for the different port suggested by the QCA switch team. Add this
> missing settings to improve switch stability under load condition.
> The packet priority tweak and the rx delay is specific to qca8337.
> Limit this changes to qca8337 as now we also support 8327 switch.
> 
> Signed-off-by: Ansuel Smith <[email-masked]>
> ---
>  drivers/net/dsa/qca8k.c | 54 +++++++++++++++++++++++++++++++++++++++--
>  drivers/net/dsa/qca8k.h | 24 ++++++++++++++++++
>  2 files changed, 76 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
> index 17c6fd4afa7d..9e034c445085 100644
> --- a/drivers/net/dsa/qca8k.c
> +++ b/drivers/net/dsa/qca8k.c
> @@ -783,7 +783,12 @@ static int
>  qca8k_setup(struct dsa_switch *ds)
>  {
>  	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
> +	const struct qca8k_match_data *data;
>  	int ret, i;
> +	u32 mask;
> +
> +	/* get the switches ID from the compatible */
> +	data = of_device_get_match_data(priv->dev);

You have already done this once in probe. Either store data in qca8k_priv,
or add the id to qca8K_priv.

   Andrew