Subject: Re: [PATCH 3/3] dt-bindings: net: rename Qualcomm IPQ MDIO bindings

From: Andrew Lunn <[email-masked]>
Date: Mon, 2 Aug 2021 15:39:25 +0200

> > since the phylib code can't satisfy resetting PHY in IPQ chipset, phylib
> > resets phy by
> > configuring GPIO output value to 1, then to 0. however the PHY reset in
> > IPQ chipset need
> > to configuring GPIO output value to 0, then to 1 for the PHY reset, so i
> > put the phy-reset-gpios here.

Look at the active low DT property of a GPIO.

     Andrew