Subject: Re: [RFC PATCH net-next] net: bridge: switchdev: expose the port hwdom as a netlink attribute

From: Ido Schimmel <[email-masked]>
Date: Thu, 12 Aug 2021 18:35:15 +0300

On Thu, Aug 12, 2021 at 03:17:03PM +0300, Vladimir Oltean wrote:
> It is useful for a user to see whether a bridge port is offloaded or
> not, and sometimes this may depend on hardware capability.
> 
> For example, a switchdev driver might be able to offload bonding/team
> interfaces as bridge ports, but only for certain xmit hash policies.
> When running into that situation, DSA for example prints a warning
> extack that the interface is not offloaded, but not all drivers do that.
> In fact, since the recent bridge switchdev explicit offloading API, all
> switchdev drivers should be able to fall back to software LAGs being
> bridge ports without having any explicit code to handle them. So they
> don't have the warning extack printed anywhere.

[...]

> With this change, the "hardware domain" concept becomes UAPI. It is a
> read-only link attribute which is zero for non-offloaded bridge ports,
> and has a non-zero value that is unique per bridge otherwise (i.e. two
> different bridge ports, in two different bridges, might have a hwdom of
> 1 and they are still different hardware domains).
> 
> ./ip -d link
> 13: sw1p3@swp2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br0
> 		state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
>     link/ether 00:04:9f:0a:0b:0c brd ff:ff:ff:ff:ff:ff promiscuity 1 minmtu 68
>     maxmtu 2021 bridge_slave state disabled priority 32 cost 100 hairpin off guard off
>     root_block off fastleave off learning on flood on port_id 0x8007 port_no 0x7
>     designated_port 32775 designated_cost 0 designated_bridge 8000.0:4:9f:a:b:c
>     designated_root 8000.0:4:9f:a:b:c hold_timer    0.00 message_age_timer    0.00
>     forward_delay_timer    0.00 topology_change_ack 0 config_pending 0 proxy_arp off
>     proxy_arp_wifi off mcast_router 1 mcast_fast_leave off mcast_flood on
>     mcast_to_unicast off neigh_suppress off group_fwd_mask 0 group_fwd_mask_str 0x0
>     vlan_tunnel off isolated off hwdom 2 addrgenmode none numtxqueues 8 numrxqueues 1
>     gso_max_size 65536 gso_max_segs 65535 portname p3 switchid 02000000 parentbus spi
>     parentdev spi2.1

Makes sense to me. Gives us further insight into the offload process. I
vaguely remember discussing this with Nik in the past. The
hwdom/fwd_mark is in the tree for long enough to be considered a stable
and useful concept.

You are saying that it is useful to expose despite already having
"switchid" exposed because you can have interfaces with the same
"switchid" that are not member in the same hardware domain? E.g., the
LAG example. If so, might be worth explicitly spelling it out in the
commit message.