Subject: Re: [PATCH v5 8/8] dt-bindings: net: dsa: qca8k: add LEDs definition example

From: Rob Herring <[email-masked]>
Date: Sun, 28 Nov 2021 17:11:57 -0600

On Fri, Nov 12, 2021 at 04:35:57PM +0100, Ansuel Smith wrote:
> Add LEDs definition example for qca8k using the offload trigger as the
> default trigger and add all the supported offload triggers by the
> switch.
> 
> Signed-off-by: Ansuel Smith <[email-masked]>
> ---
>  .../devicetree/bindings/net/dsa/qca8k.yaml    | 20 +++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> index 48de0ace265d..106d95adc1e8 100644
> --- a/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.yaml
> @@ -64,6 +64,8 @@ properties:
>                   internal mdio access is used.
>                   With the legacy mapping the reg corresponding to the internal
>                   mdio is the switch reg with an offset of -1.
> +                 Each phy have at least 3 LEDs connected and can be declared
> +                 using the standard LEDs structure.

at most 3? As the example only has 2...

>  
>      properties:
>        '#address-cells':
> @@ -340,6 +342,24 @@ examples:
>  
>                  internal_phy_port1: ethernet-phy@0 {
>                      reg = <0>;
> +
> +                    leds {
> +                        led@0 {
> +                            reg = <0>;
> +                            color = <LED_COLOR_ID_WHITE>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;
> +                            linux,default-trigger = "offload-phy-activity";

function is intended to replace 'linux,default-trigger'.

> +                        };
> +
> +                        led@1 {
> +                            reg = <1>;
> +                            color = <LED_COLOR_ID_AMBER>;
> +                            function = LED_FUNCTION_LAN;
> +                            function-enumerator = <1>;

Should be a different value than led@0?

> +                            linux,default-trigger = "offload-phy-activity";
> +                        };
> +                    };
>                  };
>  
>                  internal_phy_port2: ethernet-phy@1 {
> -- 
> 2.32.0
> 
>