Subject: Re: [PATCH v6] sun4i-emac.c: add dma support

From: Corentin Labbe <[email-masked]>
Date: Fri, 31 Dec 2021 11:43:53 +0100

Le Wed, Dec 29, 2021 at 09:43:51AM +0800, [email-masked] a écrit :
> From: Conley Lee <[email-masked]>
> 
> Thanks for your review. Here is the new version for this patch.
> 
> This patch adds support for the emac rx dma present on sun4i. The emac
> is able to move packets from rx fifo to RAM by using dma.
> 
> Change since v4.
>   - rename sbk field to skb
>   - rename alloc_emac_dma_req to emac_alloc_dma_req
>   - using kzalloc(..., GPF_ATOMIC) in interrupt context to avoid
>     sleeping
>   - retry by using emac_inblk_32bit when emac_dma_inblk_32bit fails
>   - fix some code style issues 
> 
> Change since v5.
>   - fix some code style issue
> 

Hello

I just tested this on a sun4i-a10-olinuxino-lime

I got:
[    2.922812] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): get io resource from device: 0x1c0b000, size = 4096
[    2.934512] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): failed to request dma channel. dma is disabled
[    2.945740] sun4i-emac 1c0b000.ethernet (unnamed net_device) (uninitialized): configure dma failed. disable dma.
[    2.957887] sun4i-emac 1c0b000.ethernet: eth0: at (ptrval), IRQ 19 MAC: 02:49:09:40:ab:3d

On which board did you test it and how ?

Regards