Subject: Re: [PATCH wireless-next v2 01/12] dt-bindings: net: bcm4329-fmac: Add Apple properties & chips

From: "Russell King (Oracle)" <[email-masked]>
Date: Mon, 12 Sep 2022 13:04:58 +0100

On Mon, Sep 12, 2022 at 11:59:17AM +0000, Alvin Šipraga wrote:
> On Mon, Sep 12, 2022 at 10:52:41AM +0100, Russell King wrote:
> > From: Hector Martin <[email-masked]>
> > 
> > This binding is currently used for SDIO devices, but these chips are
> > also used as PCIe devices on DT platforms and may be represented in the
> > DT. Re-use the existing binding and add chip compatibles used by Apple
> > T2 and M1 platforms (the T2 ones are not known to be used in DT
> > platforms, but we might as well document them).
> > 
> > Then, add properties required for firmware selection and calibration on
> > M1 machines.
> > 
> > Reviewed-by: Linus Walleij <[email-masked]>
> > Signed-off-by: Hector Martin <[email-masked]>
> > Reviewed-by: Mark Kettenis <[email-masked]>
> > Reviewed-by: Rob Herring <[email-masked]>
> > Signed-off-by: Russell King (Oracle) <[email-masked]>
> > ---
> >  .../net/wireless/brcm,bcm4329-fmac.yaml       | 39 +++++++++++++++++--
> >  1 file changed, 35 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> > index 53b4153d9bfc..fec1cc9b9a08 100644
> > --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> > +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
> > @@ -4,7 +4,7 @@
> >  $id: http://devicetree.org/schemas/net/wireless/brcm,bcm4329-fmac.yaml#
> >  $schema: http://devicetree.org/meta-schemas/core.yaml#
> >  
> > -title: Broadcom BCM4329 family fullmac wireless SDIO devices
> > +title: Broadcom BCM4329 family fullmac wireless SDIO/PCIE devices
> >  
> >  maintainers:
> >    - Arend van Spriel <[email-masked]>
> > @@ -41,11 +41,17 @@ title: Broadcom BCM4329 family fullmac wireless SDIO devices
> >                - cypress,cyw4373-fmac
> >                - cypress,cyw43012-fmac
> >            - const: brcm,bcm4329-fmac
> > -      - const: brcm,bcm4329-fmac
> > +      - enum:
> > +          - brcm,bcm4329-fmac
> > +          - pci14e4,43dc  # BCM4355
> > +          - pci14e4,4464  # BCM4364
> > +          - pci14e4,4488  # BCM4377
> > +          - pci14e4,4425  # BCM4378
> > +          - pci14e4,4433  # BCM4387
> >  
> >    reg:
> > -    description: SDIO function number for the device, for most cases
> > -      this will be 1.
> > +    description: SDIO function number for the device (for most cases
> > +      this will be 1) or PCI device identifier.
> >  
> >    interrupts:
> >      maxItems: 1
> > @@ -85,6 +91,31 @@ title: Broadcom BCM4329 family fullmac wireless SDIO devices
> >        takes precedence.
> >      type: boolean
> >  
> > +  brcm,cal-blob:
> > +    $ref: /schemas/types.yaml#/definitions/uint8-array
> > +    description: A per-device calibration blob for the Wi-Fi radio. This
> > +      should be filled in by the bootloader from platform configuration
> > +      data, if necessary, and will be uploaded to the device if present.
> 
> Is this a leftover from a previous revision of the patchset? Because as
> far as I can tell, the CLM blob is (still) being loaded via firmware,
> and no additional parsing has been added for this particular OF
> property. Should it be dropped?

It does appear to be unparsed, but I don't know whether it's needed for
the binding or not. I'll wait for the Asahi folk to review your comment
before possibly removing it.

Thanks!

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!