Subject: Re: [PATCH net-next v3 05/10] net: stmmac: reflect multi irqs for tx/rx channels and mac and safety

From: Jisheng Zhang <[email-masked]>
Date: Fri, 11 Aug 2023 00:02:37 +0800

On Thu, Aug 10, 2023 at 04:50:18PM +0200, Alexandre TORGUE wrote:
> On 8/9/23 18:50, Jisheng Zhang wrote:
> > The IP supports per channel interrupt, when intel adds the per channel
> > interrupt support, the per channel irq is from MSI vector, but this
> > feature can also be supported on non-MSI platforms. Do some necessary
> > renaming to reflects this fact.
> > 
> > Signed-off-by: Jisheng Zhang <[email-masked]>
> > ---
> >   .../net/ethernet/stmicro/stmmac/dwmac-intel.c |  4 +-
> >   .../net/ethernet/stmicro/stmmac/dwmac4_dma.c  |  2 +-
> >   .../net/ethernet/stmicro/stmmac/stmmac_main.c | 48 +++++++++----------
> >   include/linux/stmmac.h                        |  4 +-
> >   4 files changed, 29 insertions(+), 29 deletions(-)
> > 
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> > index 0ffae785d8bd..99a072907008 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
> > @@ -953,7 +953,7 @@ static int stmmac_config_single_msi(struct pci_dev *pdev,
> >   	res->irq = pci_irq_vector(pdev, 0);
> >   	res->wol_irq = res->irq;
> > -	plat->flags &= ~STMMAC_FLAG_MULTI_MSI_EN;
> > +	plat->flags &= ~STMMAC_FLAG_PERCH_IRQ_EN;
> >   	dev_info(&pdev->dev, "%s: Single IRQ enablement successful\n",
> >   		 __func__);
> > @@ -1005,7 +1005,7 @@ static int stmmac_config_multi_msi(struct pci_dev *pdev,
> >   	if (plat->msi_sfty_ue_vec < STMMAC_MSI_VEC_MAX)
> >   		res->sfty_ue_irq = pci_irq_vector(pdev, plat->msi_sfty_ue_vec);
> > -	plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
> > +	plat->flags |= STMMAC_FLAG_PERCH_IRQ_EN;
> >   	dev_info(&pdev->dev, "%s: multi MSI enablement successful\n", __func__);
> >   	return 0;
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> > index 84d3a8551b03..9bf8adf466a2 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c
> > @@ -175,7 +175,7 @@ static void dwmac4_dma_init(void __iomem *ioaddr,
> >   	value = readl(ioaddr + DMA_BUS_MODE);
> > -	if (dma_cfg->multi_msi_en) {
> > +	if (dma_cfg->perch_irq_en) {
> >   		value &= ~DMA_BUS_MODE_INTM_MASK;
> >   		value |= (DMA_BUS_MODE_INTM_MODE1 << DMA_BUS_MODE_INTM_SHIFT);
> >   	}
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > index 15ed3947361b..4ed5c976c7a3 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
> > @@ -125,11 +125,11 @@ module_param(chain_mode, int, 0444);
> >   MODULE_PARM_DESC(chain_mode, "To use chain instead of ring mode");
> >   static irqreturn_t stmmac_interrupt(int irq, void *dev_id);
> > -/* For MSI interrupts handling */
> > +/* For multi interrupts handling */
> >   static irqreturn_t stmmac_mac_interrupt(int irq, void *dev_id);
> >   static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id);
> > -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data);
> > -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data);
> > +static irqreturn_t stmmac_queue_intr_tx(int irq, void *data);
> > +static irqreturn_t stmmac_queue_intr_rx(int irq, void *data);
> >   static void stmmac_reset_rx_queue(struct stmmac_priv *priv, u32 queue);
> >   static void stmmac_reset_tx_queue(struct stmmac_priv *priv, u32 queue);
> >   static void stmmac_reset_queues_param(struct stmmac_priv *priv);
> > @@ -3513,7 +3513,7 @@ static void stmmac_free_irq(struct net_device *dev,
> >   	}
> >   }
> > -static int stmmac_request_irq_multi_msi(struct net_device *dev)
> > +static int stmmac_request_irq_multi(struct net_device *dev)
> 
> What mean "irq_multi". You change previously "multi_msi" by "perch_irq",
> maybe you could do something with this "perch" naming ?

The function request irq for all channels for STMMAC_FLAG_PERCH_IRQ_EN
case, so what about stmmac_request_irq_multi_channel?

> 
> >   {
> >   	struct stmmac_priv *priv = netdev_priv(dev);
> >   	enum request_irq_err irq_err;
> > @@ -3530,7 +3530,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   			  0, int_name, dev);
> >   	if (unlikely(ret < 0)) {
> >   		netdev_err(priv->dev,
> > -			   "%s: alloc mac MSI %d (error: %d)\n",
> > +			   "%s: alloc mac irq %d (error: %d)\n",
> >   			   __func__, dev->irq, ret);
> >   		irq_err = REQ_IRQ_ERR_MAC;
> >   		goto irq_error;
> > @@ -3547,7 +3547,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   				  0, int_name, dev);
> >   		if (unlikely(ret < 0)) {
> >   			netdev_err(priv->dev,
> > -				   "%s: alloc wol MSI %d (error: %d)\n",
> > +				   "%s: alloc wol irq %d (error: %d)\n",
> >   				   __func__, priv->wol_irq, ret);
> >   			irq_err = REQ_IRQ_ERR_WOL;
> >   			goto irq_error;
> > @@ -3565,7 +3565,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   				  0, int_name, dev);
> >   		if (unlikely(ret < 0)) {
> >   			netdev_err(priv->dev,
> > -				   "%s: alloc lpi MSI %d (error: %d)\n",
> > +				   "%s: alloc lpi irq %d (error: %d)\n",
> >   				   __func__, priv->lpi_irq, ret);
> >   			irq_err = REQ_IRQ_ERR_LPI;
> >   			goto irq_error;
> > @@ -3583,7 +3583,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   				  0, int_name, dev);
> >   		if (unlikely(ret < 0)) {
> >   			netdev_err(priv->dev,
> > -				   "%s: alloc sfty ce MSI %d (error: %d)\n",
> > +				   "%s: alloc sfty ce irq %d (error: %d)\n",
> >   				   __func__, priv->sfty_ce_irq, ret);
> >   			irq_err = REQ_IRQ_ERR_SFTY_CE;
> >   			goto irq_error;
> > @@ -3601,14 +3601,14 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   				  0, int_name, dev);
> >   		if (unlikely(ret < 0)) {
> >   			netdev_err(priv->dev,
> > -				   "%s: alloc sfty ue MSI %d (error: %d)\n",
> > +				   "%s: alloc sfty ue irq %d (error: %d)\n",
> >   				   __func__, priv->sfty_ue_irq, ret);
> >   			irq_err = REQ_IRQ_ERR_SFTY_UE;
> >   			goto irq_error;
> >   		}
> >   	}
> > -	/* Request Rx MSI irq */
> > +	/* Request Rx queue irq */
> >   	for (i = 0; i < priv->plat->rx_queues_to_use; i++) {
> >   		if (i >= MTL_MAX_RX_QUEUES)
> >   			break;
> > @@ -3618,11 +3618,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   		int_name = priv->int_name_rx_irq[i];
> >   		sprintf(int_name, "%s:%s-%d", dev->name, "rx", i);
> >   		ret = request_irq(priv->rx_irq[i],
> > -				  stmmac_msi_intr_rx,
> > +				  stmmac_queue_intr_rx,
> >   				  0, int_name, &priv->dma_conf.rx_queue[i]);
> >   		if (unlikely(ret < 0)) {
> >   			netdev_err(priv->dev,
> > -				   "%s: alloc rx-%d  MSI %d (error: %d)\n",
> > +				   "%s: alloc rx-%d irq %d (error: %d)\n",
> >   				   __func__, i, priv->rx_irq[i], ret);
> >   			irq_err = REQ_IRQ_ERR_RX;
> >   			irq_idx = i;
> > @@ -3633,7 +3633,7 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   		irq_set_affinity_hint(priv->rx_irq[i], &cpu_mask);
> >   	}
> > -	/* Request Tx MSI irq */
> > +	/* Request Tx queue irq */
> >   	for (i = 0; i < priv->plat->tx_queues_to_use; i++) {
> >   		if (i >= MTL_MAX_TX_QUEUES)
> >   			break;
> > @@ -3643,11 +3643,11 @@ static int stmmac_request_irq_multi_msi(struct net_device *dev)
> >   		int_name = priv->int_name_tx_irq[i];
> >   		sprintf(int_name, "%s:%s-%d", dev->name, "tx", i);
> >   		ret = request_irq(priv->tx_irq[i],
> > -				  stmmac_msi_intr_tx,
> > +				  stmmac_queue_intr_tx,
> >   				  0, int_name, &priv->dma_conf.tx_queue[i]);
> >   		if (unlikely(ret < 0)) {
> >   			netdev_err(priv->dev,
> > -				   "%s: alloc tx-%d  MSI %d (error: %d)\n",
> > +				   "%s: alloc tx-%d irq %d (error: %d)\n",
> >   				   __func__, i, priv->tx_irq[i], ret);
> >   			irq_err = REQ_IRQ_ERR_TX;
> >   			irq_idx = i;
> > @@ -3722,8 +3722,8 @@ static int stmmac_request_irq(struct net_device *dev)
> >   	int ret;
> >   	/* Request the IRQ lines */
> > -	if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN)
> > -		ret = stmmac_request_irq_multi_msi(dev);
> > +	if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN)
> > +		ret = stmmac_request_irq_multi(dev);
> >   	else
> >   		ret = stmmac_request_irq_single(dev);
> > @@ -5938,7 +5938,7 @@ static irqreturn_t stmmac_safety_interrupt(int irq, void *dev_id)
> >   	return IRQ_HANDLED;
> >   }
> > -static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> > +static irqreturn_t stmmac_queue_intr_tx(int irq, void *data)
> >   {
> >   	struct stmmac_tx_queue *tx_q = (struct stmmac_tx_queue *)data;
> >   	struct stmmac_dma_conf *dma_conf;
> > @@ -5970,7 +5970,7 @@ static irqreturn_t stmmac_msi_intr_tx(int irq, void *data)
> >   	return IRQ_HANDLED;
> >   }
> > -static irqreturn_t stmmac_msi_intr_rx(int irq, void *data)
> > +static irqreturn_t stmmac_queue_intr_rx(int irq, void *data)
> >   {
> >   	struct stmmac_rx_queue *rx_q = (struct stmmac_rx_queue *)data;
> >   	struct stmmac_dma_conf *dma_conf;
> > @@ -6007,12 +6007,12 @@ static void stmmac_poll_controller(struct net_device *dev)
> >   	if (test_bit(STMMAC_DOWN, &priv->state))
> >   		return;
> > -	if (priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN) {
> > +	if (priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN) {
> >   		for (i = 0; i < priv->plat->rx_queues_to_use; i++)
> > -			stmmac_msi_intr_rx(0, &priv->dma_conf.rx_queue[i]);
> > +			stmmac_queue_intr_rx(0, &priv->dma_conf.rx_queue[i]);
> >   		for (i = 0; i < priv->plat->tx_queues_to_use; i++)
> > -			stmmac_msi_intr_tx(0, &priv->dma_conf.tx_queue[i]);
> > +			stmmac_queue_intr_tx(0, &priv->dma_conf.tx_queue[i]);
> >   	} else {
> >   		disable_irq(dev->irq);
> >   		stmmac_interrupt(dev->irq, dev);
> > @@ -7278,8 +7278,8 @@ int stmmac_dvr_probe(struct device *device,
> >   	priv->plat = plat_dat;
> >   	priv->ioaddr = res->addr;
> >   	priv->dev->base_addr = (unsigned long)res->addr;
> > -	priv->plat->dma_cfg->multi_msi_en =
> > -		(priv->plat->flags & STMMAC_FLAG_MULTI_MSI_EN);
> > +	priv->plat->dma_cfg->perch_irq_en =
> > +		(priv->plat->flags & STMMAC_FLAG_PERCH_IRQ_EN);
> >   	priv->dev->irq = res->irq;
> >   	priv->wol_irq = res->wol_irq;
> > diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
> > index 11671fd6adee..76249117c0ff 100644
> > --- a/include/linux/stmmac.h
> > +++ b/include/linux/stmmac.h
> > @@ -96,7 +96,7 @@ struct stmmac_dma_cfg {
> >   	int mixed_burst;
> >   	bool aal;
> >   	bool eame;
> > -	bool multi_msi_en;
> > +	bool perch_irq_en;
> >   	bool dche;
> >   };
> > @@ -211,7 +211,7 @@ struct dwmac4_addrs {
> >   #define STMMAC_FLAG_TSO_EN			BIT(4)
> >   #define STMMAC_FLAG_SERDES_UP_AFTER_PHY_LINKUP	BIT(5)
> >   #define STMMAC_FLAG_VLAN_FAIL_Q_EN		BIT(6)
> > -#define STMMAC_FLAG_MULTI_MSI_EN		BIT(7)
> > +#define STMMAC_FLAG_PERCH_IRQ_EN		BIT(7)
> >   #define STMMAC_FLAG_EXT_SNAPSHOT_EN		BIT(8)
> >   #define STMMAC_FLAG_INT_SNAPSHOT_EN		BIT(9)
> >   #define STMMAC_FLAG_RX_CLK_RUNS_IN_LPI		BIT(10)
>