Subject: Re: [PATCH] net: phy: adin1100: Fix nullptr exception for phy interrupts

From: "Russell King (Oracle)" <[email-masked]>
Date: Thu, 18 Jan 2024 17:20:46 +0000

In addition to Andrew's comments:

On Thu, Jan 18, 2024 at 11:43:41AM +0100, Andre Werner wrote:
> +static int adin_config_intr(struct phy_device *phydev)
> +{
> +	int ret, regval;
> +
> +	ret = adin_phy_ack_intr(phydev);
> +
> +	if (ret)
> +		return ret;
> +
> +	regval = phy_read_mmd(phydev, MDIO_MMD_VEND2, ADIN_PHY_SUBSYS_IRQ_MASK);
> +	if (regval < 0)
> +		return regval;
> +
> +	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> +		regval |= ADIN_LINK_STAT_CHNG_IRQ_EN;
> +	else
> +		regval &= ~ADIN_LINK_STAT_CHNG_IRQ_EN;
> +
> +	ret = phy_write_mmd(phydev, MDIO_MMD_VEND2,
> +			    ADIN_PHY_SUBSYS_IRQ_MASK,
> +			    regval);
> +	return ret;

	u16 irq_mask;

	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
		irq_mask = ADIN_LINK_STAT_CHNG_IRQ_EN;
	else
		irq_mask = 0;

	return phy_modify_mmd(phydev, MDIO_MMD_VEND2,
			      ADIN_PHY_SUBSYS_IRQ_MASK,
			      ADIN_LINK_STAT_CHNG_IRQ_EN, irq_mask);

> +}
> +
> +static irqreturn_t adin_phy_handle_interrupt(struct phy_device *phydev)
> +{
> +	int irq_status;
> +
> +	irq_status = phy_read_mmd(phydev, MDIO_MMD_VEND2, ADIN_PHY_SUBSYS_IRQ_STATUS);

Probably want to wrap this - if you're going to bother wrapping your
phy_write_mmd() above because it overflows 80 columns, then please do
so consistently.

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!