From: "Russell King (Oracle)" <linux@armlinux•org.uk>
To: Georg Gottleuber <ggo@tuxedocomputers•com>
Cc: Yao Zi <me@ziyao•cc>,
andrew+netdev@lunn•ch, davem@davemloft•net, edumazet@google•com,
kuba@kernel•org, pabeni@redhat•com, Frank.Sae@motor-comm•com,
hkallweit1@gmail•com, vladimir.oltean@nxp•com, wens@csie•org,
jszhang@kernel•org, 0x1207@gmail•com,
linux-kernel@vger•kernel.org, netdev@vger•kernel.org,
jeffbai@aosc•io, kexybiscuit@aosc•io
Subject: Re: [PATCH RESEND net-next v6 0/3] Add DWMAC glue driver for Motorcomm YT6801
Date: Mon, 19 Jan 2026 15:43:44 +0000 [thread overview]
Message-ID: <aW5RMKqwpYTZ9uFH@shell.armlinux.org.uk> (raw)
In-Reply-To: <147b700c-cae2-4286-b532-ec408e00b004@tuxedocomputers.com>
On Mon, Jan 19, 2026 at 04:33:17PM +0100, Georg Gottleuber wrote:
> Hi,
>
> I tested this driver with our TUXEDO InfinityBook Pro AMD Gen9. Iperf
> revealed that tx is only 100Mbit/s:
>
> ## YT6801 TX
>
> [ ID] Interval Transfer Bitrate Retr Cwnd
> [ 5] 0.00-1.00 sec 8.75 MBytes 73.3 Mbits/sec 0 164 KBytes
>
> [ 5] 1.00-2.00 sec 8.62 MBytes 72.4 Mbits/sec 0 164 KBytes
>
> [ 5] 2.00-3.00 sec 8.62 MBytes 72.4 Mbits/sec 0 164 KBytes
>
> [ 5] 3.00-4.00 sec 8.12 MBytes 68.2 Mbits/sec 0 164 KBytes
>
> [ 5] 4.00-5.00 sec 8.62 MBytes 72.3 Mbits/sec 0 164 KBytes
>
> [ 5] 5.00-6.00 sec 8.50 MBytes 71.3 Mbits/sec 0 164 KBytes
>
> [ 5] 6.00-7.00 sec 8.25 MBytes 69.2 Mbits/sec 0 164 KBytes
>
> [ 5] 7.00-8.00 sec 8.62 MBytes 72.4 Mbits/sec 0 164 KBytes
>
> [ 5] 8.00-9.00 sec 8.50 MBytes 71.3 Mbits/sec 0 164 KBytes
>
> [ 5] 9.00-10.00 sec 8.62 MBytes 72.3 Mbits/sec 0 164 KBytes
>
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bitrate Retr
> [ 5] 0.00-10.00 sec 85.2 MBytes 71.5 Mbits/sec 0 sender
> [ 5] 0.00-10.05 sec 84.4 MBytes 70.5 Mbits/sec
> receiver
>
>
> ## YT6801 RX
>
> [ ID] Interval Transfer Bitrate
> [ 5] 0.00-1.00 sec 112 MBytes 939 Mbits/sec
> [ 5] 1.00-2.00 sec 112 MBytes 941 Mbits/sec
> [ 5] 2.00-3.00 sec 112 MBytes 941 Mbits/sec
> [ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec
> [ 5] 4.00-5.00 sec 112 MBytes 942 Mbits/sec
> [ 5] 5.00-6.00 sec 112 MBytes 943 Mbits/sec
> [ 5] 6.00-7.00 sec 112 MBytes 941 Mbits/sec
> [ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec
> [ 5] 8.00-9.00 sec 112 MBytes 942 Mbits/sec
> [ 5] 9.00-10.00 sec 112 MBytes 941 Mbits/sec
> - - - - - - - - - - - - - - - - - - - - - - - - -
> [ ID] Interval Transfer Bitrate Retr
> [ 5] 0.00-10.04 sec 1.10 GBytes 941 Mbits/sec 88 sender
> [ 5] 0.00-10.00 sec 1.10 GBytes 941 Mbits/sec
> receiver
>
> With our normally used DKMS module, Ethernet works with full-duplex and
> gigabit. Attached are some logs from lspci and dmesg. Do you have any
> idea how I can debug this further?
My suggestion would be:
- Look at the statistics, e.g.
ip -s li sh dev enp2s0
- apply
https://lore.kernel.org/r/E1vgtBc-00000005D6v-040n@rmk-PC.armlinux.org.uk
to enable more statistics to work, and check the network driver
statistics:
ethtool --statistics enp2s0
to see if there's any clues for what is going on.
--
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
next prev parent reply other threads:[~2026-01-19 15:44 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-01-09 9:34 [PATCH RESEND net-next v6 0/3] Add DWMAC glue driver for Motorcomm YT6801 Yao Zi
2026-01-09 9:34 ` [PATCH RESEND net-next v6 1/3] net: phy: motorcomm: Support YT8531S PHY in YT6801 Ethernet controller Yao Zi
2026-01-09 10:06 ` Russell King (Oracle)
2026-01-09 9:34 ` [PATCH RESEND net-next v6 2/3] net: stmmac: Add glue driver for Motorcomm YT6801 ethernet controller Yao Zi
2026-01-12 6:10 ` Sai Krishna Gajula
2026-01-12 7:51 ` Yao Zi
2026-01-12 10:17 ` Russell King (Oracle)
2026-01-09 9:34 ` [PATCH RESEND net-next v6 3/3] MAINTAINERS: Assign myself as maintainer of Motorcomm DWMAC glue driver Yao Zi
2026-01-13 3:30 ` [PATCH RESEND net-next v6 0/3] Add DWMAC glue driver for Motorcomm YT6801 patchwork-bot+netdevbpf
2026-01-19 15:33 ` Georg Gottleuber
2026-01-19 15:43 ` Russell King (Oracle) [this message]
2026-01-19 17:45 ` Georg Gottleuber
2026-01-19 17:57 ` Georg Gottleuber
2026-01-20 2:45 ` Yao Zi
2026-01-20 9:42 ` Georg Gottleuber
2026-01-20 11:52 ` Yao Zi
2026-01-21 7:10 ` Xi Ruoyao
2026-04-06 7:44 ` [PATCH net] net: stmmac: dwmac-motorcomm: fix eFUSE MAC address read failure Johan Alvarado
2026-04-06 13:41 ` Andrew Lunn
2026-04-08 1:30 ` patchwork-bot+netdevbpf
[not found] ` <4aaa214c-4286-4c24-ab5c-b17a3a1a8f1e@smtp-relay.sendinblue.com>
2026-04-06 12:42 ` Yao Zi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=aW5RMKqwpYTZ9uFH@shell.armlinux.org.uk \
--to=linux@armlinux$(echo .)org.uk \
--cc=0x1207@gmail$(echo .)com \
--cc=Frank.Sae@motor-comm$(echo .)com \
--cc=andrew+netdev@lunn$(echo .)ch \
--cc=davem@davemloft$(echo .)net \
--cc=edumazet@google$(echo .)com \
--cc=ggo@tuxedocomputers$(echo .)com \
--cc=hkallweit1@gmail$(echo .)com \
--cc=jeffbai@aosc$(echo .)io \
--cc=jszhang@kernel$(echo .)org \
--cc=kexybiscuit@aosc$(echo .)io \
--cc=kuba@kernel$(echo .)org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=me@ziyao$(echo .)cc \
--cc=netdev@vger$(echo .)kernel.org \
--cc=pabeni@redhat$(echo .)com \
--cc=vladimir.oltean@nxp$(echo .)com \
--cc=wens@csie$(echo .)org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox