Subject: Re: [PATCH iwl-next v2 1/2] ixgbe: e610: Convert ACI descriptor buffer to little endian

From: Simon Horman <[email-masked]>
Date: Fri, 23 Jan 2026 20:06:57 +0000

On Thu, Jan 22, 2026 at 05:46:32PM +0100, Piotr Kwapulinski wrote:
> The ixgbe device registers/descriptors expect little-endian ordering. Make
> the code aware that the e610 adapter operates on data with little endian
> ordering. The extra conversion is required on big-endian hosts. In most
> scenarios this conversion is not required.
> 
> Fixes: 46761fd52a88 ("ixgbe: Add support for E610 FW Admin Command Interface")
> Reviewed-by: Aleksandr Loktionov <[email-masked]>
> Signed-off-by: Piotr Kwapulinski <[email-masked]>
> ---
>  drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c
> index c2f8189..f494e90 100644
> --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c
> +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_e610.c
> @@ -113,7 +113,8 @@ static int ixgbe_aci_send_cmd_execute(struct ixgbe_hw *hw,
>  
>  	/* Descriptor is written to specific registers */
>  	for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++)
> -		IXGBE_WRITE_REG(hw, IXGBE_PF_HIDA(i), raw_desc[i]);
> +		IXGBE_WRITE_REG(hw, IXGBE_PF_HIDA(i),
> +				le32_to_cpu(raw_desc[i]));

IXGBE_WRITE_REG is backed by writel.  And my understanding is that writel
converts values from host byte order to little endian.  So I'm confused
about where this is going.

>  
>  	/* SW has to set PF_HICR.C bit and clear PF_HICR.SV and
>  	 * PF_HICR_EV
> @@ -145,7 +146,7 @@ static int ixgbe_aci_send_cmd_execute(struct ixgbe_hw *hw,
>  	if ((hicr & IXGBE_PF_HICR_SV)) {
>  		for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) {
>  			raw_desc[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIDA(i));
> -			raw_desc[i] = raw_desc[i];

I'm also curious to know what the intent (if any) of the line above was/is.

> +			raw_desc[i] = cpu_to_le32(raw_desc[i]);

Please don't use the same variable to store both host byte order and little
endian values.  In this case I'd use another local variable, say scoped to
within this block, to store the intermediate value.

And if raw_desc will be used to hold __le32 values, it's type should be
updated.

>  		}
>  	}
>  
> @@ -153,7 +154,7 @@ static int ixgbe_aci_send_cmd_execute(struct ixgbe_hw *hw,
>  	if ((hicr & IXGBE_PF_HICR_EV) && !(hicr & IXGBE_PF_HICR_C)) {
>  		for (i = 0; i < IXGBE_ACI_DESC_SIZE_IN_DWORDS; i++) {
>  			raw_desc[i] = IXGBE_READ_REG(hw, IXGBE_PF_HIDA_2(i));
> -			raw_desc[i] = raw_desc[i];
> +			raw_desc[i] = cpu_to_le32(raw_desc[i]);
>  		}
>  	}
>  
> -- 
> 2.47.1
>