Subject: Re: [PATCH net-next v5 2/2] net/mlx5e: add mlx5e_rep_indr_setup_ft_cb support

From: Vlad Buslov <[email-masked]>
Date: Tue, 24 Mar 2020 14:05:12 +0200

On Tue 24 Mar 2020 at 01:44, [email-masked] wrote:
> From: wenxu <[email-masked]>
>
> Add mlx5e_rep_indr_setup_ft_cb to support indr block setup
> in FT mode.
>
> Signed-off-by: wenxu <[email-masked]>
> ---
> v5: no change
>
>  drivers/net/ethernet/mellanox/mlx5/core/en_rep.c | 52 ++++++++++++++++++++++++
>  1 file changed, 52 insertions(+)
>
> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> index 057f5f9..30c81c3 100644
> --- a/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_rep.c
> @@ -732,6 +732,55 @@ static int mlx5e_rep_indr_setup_tc_cb(enum tc_setup_type type,
>  	}
>  }
>
> +static int mlx5e_rep_indr_setup_ft_cb(enum tc_setup_type type,
> +				      void *type_data, void *indr_priv)
> +{
> +	struct mlx5e_rep_indr_block_priv *priv = indr_priv;
> +	struct flow_cls_offload *f = type_data;
> +	struct flow_cls_offload tmp;
> +	struct mlx5e_priv *mpriv;
> +	struct mlx5_eswitch *esw;
> +	unsigned long flags;
> +	int err;
> +
> +	mpriv = netdev_priv(priv->rpriv->netdev);
> +	esw = mpriv->mdev->priv.eswitch;
> +
> +	flags = MLX5_TC_FLAG(EGRESS) |
> +		MLX5_TC_FLAG(ESW_OFFLOAD) |
> +		MLX5_TC_FLAG(FT_OFFLOAD);
> +
> +	switch (type) {
> +	case TC_SETUP_CLSFLOWER:
> +		memcpy(&tmp, f, sizeof(*f));
> +
> +		if (!mlx5_esw_chains_prios_supported(esw))
> +			return -EOPNOTSUPP;
> +
> +		/* Re-use tc offload path by moving the ft flow to the
> +		 * reserved ft chain.
> +		 *
> +		 * FT offload can use prio range [0, INT_MAX], so we normalize
> +		 * it to range [1, mlx5_esw_chains_get_prio_range(esw)]
> +		 * as with tc, where prio 0 isn't supported.
> +		 *
> +		 * We only support chain 0 of FT offload.
> +		 */
> +		if (tmp.common.prio >= mlx5_esw_chains_get_prio_range(esw))
> +			return -EOPNOTSUPP;
> +		if (tmp.common.chain_index != 0)
> +			return -EOPNOTSUPP;
> +
> +		tmp.common.chain_index = mlx5_esw_chains_get_ft_chain(esw);
> +		tmp.common.prio++;
> +		err = mlx5e_rep_indr_offload(priv->netdev, &tmp, priv, flags);
> +		memcpy(&f->stats, &tmp.stats, sizeof(f->stats));

Why do you need to create temporary copy of flow_cls_offload struct and
then copy parts of tmp back to the original? Again, this info should
probably be in the commit message.

> +		return err;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
>  static void mlx5e_rep_indr_block_unbind(void *cb_priv)
>  {
>  	struct mlx5e_rep_indr_block_priv *indr_priv = cb_priv;
> @@ -809,6 +858,9 @@ int mlx5e_rep_indr_setup_cb(struct net_device *netdev, void *cb_priv,
>  	case TC_SETUP_BLOCK:
>  		return mlx5e_rep_indr_setup_block(netdev, cb_priv, type_data,
>  						  mlx5e_rep_indr_setup_tc_cb);
> +	case TC_SETUP_FT:
> +		return mlx5e_rep_indr_setup_block(netdev, cb_priv, type_data,
> +						  mlx5e_rep_indr_setup_ft_cb);
>  	default:
>  		return -EOPNOTSUPP;
>  	}