* [PATCH V2 2/4] thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit
2020-02-28 2:53 [PATCH V2 1/4] dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM Anson Huang
@ 2020-02-28 2:53 ` Anson Huang
2020-02-28 2:53 ` [PATCH V2 3/4] arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module Anson Huang
2020-02-28 2:53 ` [PATCH V2 4/4] arm64: dts: imx8mm: Add thermal zone support Anson Huang
2 siblings, 0 replies; 4+ messages in thread
From: Anson Huang @ 2020-02-28 2:53 UTC (permalink / raw)
To: rui.zhang, daniel.lezcano, amit.kucheria, robh+dt, mark.rutland,
shawnguo, s.hauer, kernel, festevam, catalin.marinas, will,
leonard.crestez, daniel.baluta, aford173, shengjiu.wang, ping.bai,
jun.li, peng.fan, bjorn.andersson, olof, dinguyen,
marcin.juszkiewicz, linux-pm, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
i.MX8MM has a thermal monitoring unit(TMU) inside, it ONLY has one
sensor for CPU, add support for reading immediate temperature of
this sensor.
Signed-off-by: Anson Huang <Anson.Huang@nxp•com>
---
Changes since V1:
- Update the copyright and add the author.
---
drivers/thermal/Kconfig | 10 +++
drivers/thermal/Makefile | 1 +
drivers/thermal/imx8mm_thermal.c | 135 +++++++++++++++++++++++++++++++++++++++
3 files changed, 146 insertions(+)
create mode 100644 drivers/thermal/imx8mm_thermal.c
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 3502ee8..165b7d6 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -262,6 +262,16 @@ config IMX_SC_THERMAL
sensor. It supports one critical trip point and one
passive trip point for each thermal sensor.
+config IMX8MM_THERMAL
+ tristate "Temperature sensor driver for Freescale i.MX8MM SoC"
+ depends on ARCH_MXC
+ depends on OF
+ help
+ Support for Thermal Monitoring Unit (TMU) found on Freescale i.MX8MM SoC.
+ It supports one critical trip point and one passive trip point. The
+ cpufreq is used as the cooling device to throttle CPUs when the passive
+ trip is crossed.
+
config MAX77620_THERMAL
tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
depends on MFD_MAX77620
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index a11a6d8..120a05e 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -44,6 +44,7 @@ obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o
obj-$(CONFIG_TANGO_THERMAL) += tango_thermal.o
obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o
obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o
+obj-$(CONFIG_IMX8MM_THERMAL) += imx8mm_thermal.o
obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o
obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o
obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o
diff --git a/drivers/thermal/imx8mm_thermal.c b/drivers/thermal/imx8mm_thermal.c
new file mode 100644
index 0000000..ad5dd57
--- /dev/null
+++ b/drivers/thermal/imx8mm_thermal.c
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2020 NXP.
+ *
+ * Author: Anson Huang <Anson.Huang@nxp•com>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+#define TER 0x0 /* TMU enable */
+#define TRITSR 0x20 /* TMU immediate temp */
+
+#define TER_EN BIT(31)
+#define TRITSR_VAL_MASK 0xff
+
+#define TEMP_LOW_LIMIT 10
+
+struct imx8mm_tmu {
+ struct thermal_zone_device *tzd;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static int tmu_get_temp(void *data, int *temp)
+{
+ struct imx8mm_tmu *tmu = data;
+ u32 val;
+
+ /* the temp sensor need about 1ms to finish the measurement */
+ usleep_range(1000, 2000);
+
+ val = readl_relaxed(tmu->base + TRITSR) & TRITSR_VAL_MASK;
+ if (val < TEMP_LOW_LIMIT)
+ return -EAGAIN;
+
+ *temp = val * 1000;
+
+ return 0;
+}
+
+static struct thermal_zone_of_device_ops tmu_tz_ops = {
+ .get_temp = tmu_get_temp,
+};
+
+static int imx8mm_tmu_probe(struct platform_device *pdev)
+{
+ struct imx8mm_tmu *tmu;
+ u32 val;
+ int ret;
+
+ tmu = devm_kzalloc(&pdev->dev, sizeof(struct imx8mm_tmu), GFP_KERNEL);
+ if (!tmu)
+ return -ENOMEM;
+
+ tmu->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(tmu->base))
+ return PTR_ERR(tmu->base);
+
+ tmu->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(tmu->clk)) {
+ ret = PTR_ERR(tmu->clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to get tmu clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(tmu->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable tmu clock: %d\n", ret);
+ return ret;
+ }
+
+ tmu->tzd = devm_thermal_zone_of_sensor_register(&pdev->dev, 0,
+ tmu, &tmu_tz_ops);
+ if (IS_ERR(tmu->tzd)) {
+ dev_err(&pdev->dev,
+ "failed to register thermal zone sensor: %d\n", ret);
+ return PTR_ERR(tmu->tzd);
+ }
+
+ platform_set_drvdata(pdev, tmu);
+
+ /* enable the monitor */
+ val = readl_relaxed(tmu->base + TER);
+ val |= TER_EN;
+ writel_relaxed(val, tmu->base + TER);
+
+ return 0;
+}
+
+static int imx8mm_tmu_remove(struct platform_device *pdev)
+{
+ struct imx8mm_tmu *tmu = platform_get_drvdata(pdev);
+ u32 val;
+
+ /* disable TMU */
+ val = readl_relaxed(tmu->base + TER);
+ val &= ~TER_EN;
+ writel_relaxed(val, tmu->base + TER);
+
+ clk_disable_unprepare(tmu->clk);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static const struct of_device_id imx8mm_tmu_table[] = {
+ { .compatible = "fsl,imx8mm-tmu", },
+ { },
+};
+
+static struct platform_driver imx8mm_tmu = {
+ .driver = {
+ .name = "i.mx8mm_thermal",
+ .of_match_table = imx8mm_tmu_table,
+ },
+ .probe = imx8mm_tmu_probe,
+ .remove = imx8mm_tmu_remove,
+};
+module_platform_driver(imx8mm_tmu);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp•com>");
+MODULE_DESCRIPTION("i.MX8MM Thermal Monitor Unit driver");
+MODULE_LICENSE("GPL v2");
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH V2 3/4] arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module
2020-02-28 2:53 [PATCH V2 1/4] dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM Anson Huang
2020-02-28 2:53 ` [PATCH V2 2/4] thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit Anson Huang
@ 2020-02-28 2:53 ` Anson Huang
2020-02-28 2:53 ` [PATCH V2 4/4] arm64: dts: imx8mm: Add thermal zone support Anson Huang
2 siblings, 0 replies; 4+ messages in thread
From: Anson Huang @ 2020-02-28 2:53 UTC (permalink / raw)
To: rui.zhang, daniel.lezcano, amit.kucheria, robh+dt, mark.rutland,
shawnguo, s.hauer, kernel, festevam, catalin.marinas, will,
leonard.crestez, daniel.baluta, aford173, shengjiu.wang, ping.bai,
jun.li, peng.fan, bjorn.andersson, olof, dinguyen,
marcin.juszkiewicz, linux-pm, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Enable CONFIG_IMX8MM_THERMAL as module to support i.MX8MM
thermal driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp•com>
---
No change.
---
arch/arm64/configs/defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 31d0984..75c46b1 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -455,6 +455,7 @@ CONFIG_CPU_THERMAL=y
CONFIG_THERMAL_EMULATION=y
CONFIG_QORIQ_THERMAL=m
CONFIG_IMX_SC_THERMAL=m
+CONFIG_IMX8MM_THERMAL=m
CONFIG_ROCKCHIP_THERMAL=m
CONFIG_RCAR_THERMAL=y
CONFIG_RCAR_GEN3_THERMAL=y
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH V2 4/4] arm64: dts: imx8mm: Add thermal zone support
2020-02-28 2:53 [PATCH V2 1/4] dt-bindings: thermal: imx8mm-thermal: Add binding doc for i.MX8MM Anson Huang
2020-02-28 2:53 ` [PATCH V2 2/4] thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit Anson Huang
2020-02-28 2:53 ` [PATCH V2 3/4] arm64: defconfig: Enable CONFIG_IMX8MM_THERMAL as module Anson Huang
@ 2020-02-28 2:53 ` Anson Huang
2 siblings, 0 replies; 4+ messages in thread
From: Anson Huang @ 2020-02-28 2:53 UTC (permalink / raw)
To: rui.zhang, daniel.lezcano, amit.kucheria, robh+dt, mark.rutland,
shawnguo, s.hauer, kernel, festevam, catalin.marinas, will,
leonard.crestez, daniel.baluta, aford173, shengjiu.wang, ping.bai,
jun.li, peng.fan, bjorn.andersson, olof, dinguyen,
marcin.juszkiewicz, linux-pm, devicetree, linux-arm-kernel,
linux-kernel
Cc: Linux-imx
Add thermal zone and tmu node to support i.MX8MM thermal
driver, ONLY cpu thermal zone is supported, and cpu cooling
is also added.
Signed-off-by: Anson Huang <Anson.Huang@nxp•com>
---
No change.
---
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 43 +++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index b3d0b29..e438095 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -68,6 +68,7 @@
nvmem-cells = <&cpu_speed_grade>;
nvmem-cell-names = "speed_grade";
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_1: cpu@1 {
@@ -80,6 +81,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_2: cpu@2 {
@@ -92,6 +94,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_3: cpu@3 {
@@ -104,6 +107,7 @@
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
cpu-idle-states = <&cpu_pd_wait>;
+ #cooling-cells = <2>;
};
A53_L2: l2-cache0 {
@@ -204,6 +208,38 @@
arm,no-tick-in-suspend;
};
+ thermal-zones {
+ cpu-thermal {
+ polling-delay-passive = <250>;
+ polling-delay = <2000>;
+ thermal-sensors = <&tmu>;
+ trips {
+ cpu_alert0: trip0 {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit0: trip1 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+ };
+
usbphynop1: usbphynop1 {
compatible = "usb-nop-xceiv";
clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
@@ -363,6 +399,13 @@
gpio-ranges = <&iomuxc 0 119 30>;
};
+ tmu: tmu@30260000 {
+ compatible = "fsl,imx8mm-tmu";
+ reg = <0x30260000 0x10000>;
+ clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+ #thermal-sensor-cells = <0>;
+ };
+
wdog1: watchdog@30280000 {
compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
reg = <0x30280000 0x10000>;
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 4+ messages in thread