From: <gregkh@linuxfoundation•org>
To: bcm-kernel-feedback-list@broadcom•com, eric@anholt•net,
f.fainelli@gmail•com, gregkh@linuxfoundation•org,
linus.walleij@linaro•org, linux-arm-kernel@lists•infradead.org,
linux-rpi-kernel@lists•infradead.org, mark.rutland@arm•com,
nsaenz@kernel•org, phil@raspberrypi•com, rjui@broadcom•com,
robh+dt@kernel•org, sbranden@broadcom•com, wahrenst@gmx•net
Cc: <stable-commits@vger•kernel.org>
Subject: Patch "pinctrl: bcm2835: Match BCM7211 compatible string" has been added to the 5.4-stable tree
Date: Thu, 27 Jan 2022 17:01:50 +0100 [thread overview]
Message-ID: <164329931012062@kroah.com> (raw)
In-Reply-To: <20220125194222.12783-5-f.fainelli@gmail.com>
This is a note to let you know that I've just added the patch titled
pinctrl: bcm2835: Match BCM7211 compatible string
to the 5.4-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
pinctrl-bcm2835-match-bcm7211-compatible-string.patch
and it can be found in the queue-5.4 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@vger•kernel.org> know about it.
From foo@baz Thu Jan 27 04:40:37 PM CET 2022
From: Florian Fainelli <f.fainelli@gmail•com>
Date: Tue, 25 Jan 2022 11:42:19 -0800
Subject: pinctrl: bcm2835: Match BCM7211 compatible string
To: stable@vger•kernel.org
Cc: Florian Fainelli <f.fainelli@gmail•com>, Linus Walleij <linus.walleij@linaro•org>, Rob Herring <robh+dt@kernel•org>, Mark Rutland <mark.rutland@arm•com>, Ray Jui <rjui@broadcom•com>, Scott Branden <sbranden@broadcom•com>, bcm-kernel-feedback-list@broadcom•com (maintainer:BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITE...), Eric Anholt <eric@anholt•net>, Stefan Wahren <wahrenst@gmx•net>, Nicolas Saenz Julienne <nsaenz@kernel•org>, Phil Elwell <phil@raspberrypi•com>, devicetree@vger•kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS), linux-kernel@vger•kernel.org (open list), linux-gpio@vger•kernel.org (open list:PIN CONTROL SUBSYSTEM), linux-rpi-kernel@lists•infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE), linux-arm-kernel@lists•infradead.org (moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE)
Message-ID: <20220125194222.12783-5-f.fainelli@gmail•com>
From: Florian Fainelli <f.fainelli@gmail•com>
commit 562c856f96d22ef1204b0a314bc52e85617199b4 upstream
The BCM7211 SoC uses the same pinconf_ops as the ones defined for the
BCM2711 SoC, match the compatible string and use the correct set of
options.
Signed-off-by: Florian Fainelli <f.fainelli@gmail•com>
Link: https://lore.kernel.org/r/20200531001101.24945-4-f.fainelli@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro•org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail•com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation•org>
---
drivers/pinctrl/bcm/pinctrl-bcm2835.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
@@ -1134,6 +1134,10 @@ static const struct of_device_id bcm2835
.compatible = "brcm,bcm2711-gpio",
.data = &bcm2711_plat_data,
},
+ {
+ .compatible = "brcm,bcm7211-gpio",
+ .data = &bcm2711_plat_data,
+ },
{}
};
Patches currently in stable-queue which might be from f.fainelli@gmail•com are
queue-5.4/pinctrl-bcm2835-drop-unused-define.patch
queue-5.4/arm-dts-gpio-ranges-property-is-now-required.patch
queue-5.4/pinctrl-bcm2835-add-support-for-wake-up-interrupts.patch
queue-5.4/pinctrl-bcm2835-change-init-order-for-gpio-hogs.patch
queue-5.4/pinctrl-bcm2835-refactor-platform-data.patch
queue-5.4/pinctrl-bcm2835-match-bcm7211-compatible-string.patch
queue-5.4/pinctrl-bcm2835-add-support-for-all-gpios-on-bcm2711.patch
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-01-27 16:05 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-01-25 19:42 [PATCH stable 5.4 0/7] pinctrl-bcm2835 gpio-ranges bugfix Florian Fainelli
2022-01-25 19:42 ` [PATCH stable 5.4 1/7] pinctrl: bcm2835: Drop unused define Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Drop unused define" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 2/7] pinctrl: bcm2835: Refactor platform data Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Refactor platform data" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 3/7] pinctrl: bcm2835: Add support for all GPIOs on BCM2711 Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Add support for all GPIOs on BCM2711" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 4/7] pinctrl: bcm2835: Match BCM7211 compatible string Florian Fainelli
2022-01-27 16:01 ` gregkh [this message]
2022-01-25 19:42 ` [PATCH stable 5.4 5/7] pinctrl: bcm2835: Add support for wake-up interrupts Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Add support for wake-up interrupts" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 6/7] pinctrl: bcm2835: Change init order for gpio hogs Florian Fainelli
2022-01-27 16:01 ` Patch "pinctrl: bcm2835: Change init order for gpio hogs" has been added to the 5.4-stable tree gregkh
2022-01-25 19:42 ` [PATCH stable 5.4 7/7] ARM: dts: gpio-ranges property is now required Florian Fainelli
2022-01-27 16:01 ` Patch "ARM: dts: gpio-ranges property is now required" has been added to the 5.4-stable tree gregkh
2022-01-27 15:41 ` [PATCH stable 5.4 0/7] pinctrl-bcm2835 gpio-ranges bugfix Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164329931012062@kroah.com \
--to=gregkh@linuxfoundation$(echo .)org \
--cc=bcm-kernel-feedback-list@broadcom$(echo .)com \
--cc=eric@anholt$(echo .)net \
--cc=f.fainelli@gmail$(echo .)com \
--cc=linus.walleij@linaro$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-rpi-kernel@lists$(echo .)infradead.org \
--cc=mark.rutland@arm$(echo .)com \
--cc=nsaenz@kernel$(echo .)org \
--cc=phil@raspberrypi$(echo .)com \
--cc=rjui@broadcom$(echo .)com \
--cc=robh+dt@kernel$(echo .)org \
--cc=sbranden@broadcom$(echo .)com \
--cc=stable-commits@vger$(echo .)kernel.org \
--cc=wahrenst@gmx$(echo .)net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox