From: andrew@lunn•ch (Andrew Lunn)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 0/5] more clk-next fixes
Date: Tue, 8 May 2012 09:20:31 +0200 [thread overview]
Message-ID: <20120508072031.GC26076@lunn.ch> (raw)
In-Reply-To: <1336367310-5140-1-git-send-email-mturquette@linaro.org>
> Note that the Orion patches aren't here, but I figure that Andrew L.
> probably wants to check those against the final clk-next before I pull
> them.
Hi Mike
Here is a pull request. There is only one small change since the
previous version. The last patch no longer has
select COMMON_CLK_DISABLE_UNUSED.
Thanks
Andrew
The following changes since commit d49d10779b9b9d1c07dc61bf58a7995835b7d32f:
clk: clk_set_rate() must fail if CLK_SET_RATE_GATE is set and clk is enabled (2012-05-07 09:57:58 +0200)
are available in the git repository at:
git://github.com/lunn/orion-clk.git v3.4-rc5-clk-next-orion-v2
Andrew Lunn (14):
[ARM: Orion] Add clocks using the generic clk infrastructure.
[ARM: Orion: SPI] Add clk/clkdev support.
[ARM: Orion: Eth] Add clk/clkdev support.
[ARM: Orion: WDT] Add clk/clkdev support
[ARM: Orion: UART] Get the clock rate via clk_get_rate().
[ARM: Orion: SATA] Add per channel clk/clkdev support.
[ARM: Orion: EHCI] Add support for enabling clocks
[ARM: Orion: NAND] Add support for clk, if there is one.
[ARM: Orion: SDIO] Add support for clk.
[ARM: Orion: CESA] Add support for clk
[ARM: Orion: XOR] Add support for clk
[ARM: Orion: PCIE] Add support for clk
[ARM: Orion: Audio] Add clk/clkdev support
[ARM: Kirkwood] Replace clock gating
arch/arm/Kconfig | 2 +
arch/arm/mach-dove/common.c | 40 ++-
arch/arm/mach-dove/dove-db-setup.c | 1 -
arch/arm/mach-kirkwood/board-dreamplug.c | 1 -
arch/arm/mach-kirkwood/board-dt.c | 3 +
arch/arm/mach-kirkwood/common.c | 274 ++++++++++++++-------
arch/arm/mach-kirkwood/common.h | 1 +
arch/arm/mach-kirkwood/include/mach/bridge-regs.h | 16 ++
arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c | 1 -
arch/arm/mach-kirkwood/pcie.c | 25 ++-
arch/arm/mach-kirkwood/rd88f6192-nas-setup.c | 1 -
arch/arm/mach-kirkwood/t5325-setup.c | 1 -
arch/arm/mach-kirkwood/tsx1x-common.c | 1 -
arch/arm/mach-mv78xx0/common.c | 45 +++--
arch/arm/mach-orion5x/common.c | 27 ++-
arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c | 1 -
arch/arm/plat-orion/common.c | 104 +++++----
arch/arm/plat-orion/include/plat/common.h | 34 ++--
arch/arm/plat-orion/include/plat/orion_wdt.h | 18 --
arch/arm/plat-orion/pcie.c | 4 +-
drivers/ata/sata_mv.c | 40 +++-
drivers/crypto/mv_cesa.c | 14 +
drivers/dma/mv_xor.c | 15 ++
drivers/dma/mv_xor.h | 1 +
drivers/mmc/host/mvsdio.c | 14 +
drivers/mtd/nand/orion_nand.c | 18 ++
drivers/net/ethernet/marvell/mv643xx_eth.c | 42 +++-
drivers/spi/spi-orion.c | 30 ++-
drivers/usb/host/ehci-orion.c | 16 ++
drivers/watchdog/orion_wdt.c | 16 +-
include/linux/mv643xx_eth.h | 1 -
include/linux/spi/orion_spi.h | 17 --
sound/soc/kirkwood/kirkwood-i2s.c | 13 +
sound/soc/kirkwood/kirkwood.h | 1 +
34 files changed, 575 insertions(+), 263 deletions(-)
delete mode 100644 arch/arm/plat-orion/include/plat/orion_wdt.h
delete mode 100644 include/linux/spi/orion_spi.h
next prev parent reply other threads:[~2012-05-08 7:20 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-07 5:08 [PATCH 0/5] more clk-next fixes Mike Turquette
2012-05-07 5:08 ` [PATCH 1/5] MAINTAINERS: add entry for common clk framework Mike Turquette
2012-05-07 5:08 ` [PATCH 2/5] clk: prevent spurious parent rate propagation Mike Turquette
2012-05-07 7:58 ` Sascha Hauer
2012-05-07 17:34 ` Turquette, Mike
2012-05-07 5:08 ` [PATCH 3/5] clk: remove COMMON_CLK_DISABLE_UNUSED Mike Turquette
2012-05-07 19:31 ` Saravana Kannan
2012-05-07 5:08 ` [PATCH 4/5] clk: mux: assign init data Mike Turquette
2012-05-07 5:08 ` [PATCH 5/5] clk: add a fixed factor clock Mike Turquette
2012-05-07 19:54 ` Saravana Kannan
2012-05-07 20:14 ` Turquette, Mike
2012-05-07 20:26 ` Saravana Kannan
2012-05-08 7:20 ` Andrew Lunn [this message]
2012-05-08 16:12 ` [PATCH 0/5] more clk-next fixes Shawn Guo
2012-05-08 17:33 ` Turquette, Mike
2012-05-08 21:35 ` Turquette, Mike
2012-05-11 14:39 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120508072031.GC26076@lunn.ch \
--to=andrew@lunn$(echo .)ch \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox