From: arnd@linaro•org (Arnd Bergmann)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 04/10] USB: EHCI: make ehci-orion a separate driver
Date: Thu, 7 Feb 2013 19:41:22 +0000 [thread overview]
Message-ID: <201302071941.22422.arnd@linaro.org> (raw)
In-Reply-To: <5113e5f0.c84e420a.08c3.ffffbe9a@mx.google.com>
On Thursday 07 February 2013, manjunath.goudar at linaro.org wrote:
> @@ -155,7 +155,7 @@ static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
> * before driver shutdown. But it also seems to be caused by bugs in cardbus
> * bridge shutdown: shutting down the bridge before the devices using it.
> */
> -static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
> +int handshake(struct ehci_hcd *ehci, void __iomem *ptr,
> u32 mask, u32 done, int usec)
> {
> u32 result;
I had not noticed this before, but apparently it belongs into the
tegra patch that you dropped, rather than this patch.
Same thing for all the changes below.
> @@ -172,9 +172,9 @@ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
> } while (usec > 0);
> return -ETIMEDOUT;
> }
> -
> +EXPORT_SYMBOL_GPL(handshake);
> /* check TDI/ARC silicon is in host mode */
> -static int tdi_in_host_mode (struct ehci_hcd *ehci)
> +static int tdi_in_host_mode(struct ehci_hcd *ehci)
> {
> u32 tmp;
>
> @@ -186,7 +186,7 @@ static int tdi_in_host_mode (struct ehci_hcd *ehci)
> * Force HC to halt state from unknown (EHCI spec section 2.3).
> * Must be called with interrupts enabled and the lock not held.
> */
> -static int ehci_halt (struct ehci_hcd *ehci)
> +int ehci_halt(struct ehci_hcd *ehci)
> {
> u32 temp;
>
> @@ -215,9 +215,9 @@ static int ehci_halt (struct ehci_hcd *ehci)
> return handshake(ehci, &ehci->regs->status,
> STS_HALT, STS_HALT, 16 * 125);
> }
> -
> +EXPORT_SYMBOL_GPL(ehci_halt);
> /* put TDI/ARC silicon into EHCI mode */
> -static void tdi_reset (struct ehci_hcd *ehci)
> +void tdi_reset(struct ehci_hcd *ehci)
> {
> u32 tmp;
>
> @@ -231,12 +231,12 @@ static void tdi_reset (struct ehci_hcd *ehci)
> tmp |= USBMODE_BE;
> ehci_writel(ehci, tmp, &ehci->regs->usbmode);
> }
> -
> +EXPORT_SYMBOL_GPL(tdi_reset);
> /*
> * Reset a non-running (STS_HALT == 1) controller.
> * Must be called with interrupts enabled and the lock not held.
> */
> -static int ehci_reset (struct ehci_hcd *ehci)
> +int ehci_reset(struct ehci_hcd *ehci)
> {
> int retval;
> u32 command = ehci_readl(ehci, &ehci->regs->command);
> @@ -272,7 +272,7 @@ static int ehci_reset (struct ehci_hcd *ehci)
> ehci->resuming_ports = 0;
> return retval;
> }
> -
> +EXPORT_SYMBOL_GPL(ehci_reset);
> /*
> * Idle the controller (turn off the schedules).
> * Must be called with interrupts enabled and the lock not held.
> @@ -352,7 +352,7 @@ static void ehci_silence_controller(struct ehci_hcd *ehci)
> * This forcibly disables dma and IRQs, helping kexec and other cases
> * where the next system software may expect clean state.
> */
> -static void ehci_shutdown(struct usb_hcd *hcd)
> +void ehci_shutdown(struct usb_hcd *hcd)
> {
> struct ehci_hcd *ehci = hcd_to_ehci(hcd);
>
> @@ -366,7 +366,7 @@ static void ehci_shutdown(struct usb_hcd *hcd)
>
> hrtimer_cancel(&ehci->hrtimer);
> }
> -
> +EXPORT_SYMBOL_GPL(ehci_shutdown);
Arnd
next prev parent reply other threads:[~2013-02-07 19:41 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <yes>
2010-08-11 5:21 ` [PATCH v3] OpenRD: Enable SD/UART selection for serial port 1 Tanmay Upadhyay
2010-08-11 7:27 ` Russell King - ARM Linux
2011-06-15 0:46 ` [PATCH] Add ok2440 development board support Wu DaoGuang
2011-06-22 5:55 ` [PATCH 3/3 v2] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-07-06 12:20 ` Daniel Mack
2011-07-06 12:44 ` Eric Miao
2011-07-21 4:54 ` [PATCHV2] OMAP4: OPP: add OMAP4460 definitions Vishwanath BS
[not found] ` <4e27b0d0.100e8e0a.43e0.ffffe6d9SMTPIN_ADDED@mx.google.com>
2011-07-21 4:56 ` Vishwanath Sripathy
2011-10-03 0:32 ` [PATCH 1/1] ARM: Make debug UART optional for S3C devices Thiago A. Correa
2011-10-10 14:44 ` Thiago A. Corrêa
2013-02-07 17:33 ` [PATCH 00/10] usb: ehci: more bus glues as separate modules manjunath.goudar at linaro.org
2013-02-07 20:13 ` Ezequiel Garcia
2013-02-08 15:23 ` Alan Stern
[not found] ` <1360258447-27247-1-git-send-email-yes>
2013-02-07 17:33 ` [PATCH 01/10] USB:Changed omap2plus_defconfig to support OMAP USB static driver manjunath.goudar at linaro.org
2013-02-07 17:33 ` [PATCH 02/10] USB: EHCI: make ehci-omap a separate driver manjunath.goudar at linaro.org
2013-02-08 7:42 ` Felipe Balbi
2013-02-08 8:56 ` Roger Quadros
2013-02-07 17:34 ` [PATCH 03/10] USB: EHCI: make ehci-spear " manjunath.goudar at linaro.org
2013-02-08 4:27 ` Viresh Kumar
2013-02-07 17:34 ` [PATCH 04/10] USB: EHCI: make ehci-orion " manjunath.goudar at linaro.org
2013-02-07 19:41 ` Arnd Bergmann [this message]
2013-02-08 10:38 ` Florian Fainelli
2013-02-07 17:34 ` [PATCH 05/10] USB: EHCI: make ehci-atmel " manjunath.goudar at linaro.org
2013-02-08 2:58 ` Bo Shen
2013-06-12 11:53 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-07 17:34 ` [PATCH 06/10] USB: EHCI: make ehci-s5p " manjunath.goudar at linaro.org
2013-02-07 18:49 ` Stephen Warren
2013-02-07 17:34 ` [PATCH 07/10] USB: EHCI: make ehci-mv " manjunath.goudar at linaro.org
2013-02-07 17:34 ` [PATCH 08/10] USB: EHCI: make ehci-vt8500 " manjunath.goudar at linaro.org
2013-02-07 18:54 ` Tony Prisk
2013-02-07 17:34 ` [PATCH 09/10] USB: EHCI: make ehci-msm " manjunath.goudar at linaro.org
2013-02-07 18:48 ` Stephen Warren
2013-02-07 19:05 ` David Brown
2013-02-07 17:34 ` [PATCH 10/10] USB: EHCI: make ehci-w90X900 " manjunath.goudar at linaro.org
2013-06-10 9:17 ` [PATCH v2 00/11] ARM:STixxxx: Add STixxxx platform and board support Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 01/11] serial:st-asc: Add ST ASC driver Srinivas KANDAGATLA
2013-06-10 9:35 ` Russell King - ARM Linux
2013-06-10 11:53 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 02/11] clocksource:global_timer: Add ARM global timer support Srinivas KANDAGATLA
2013-06-10 13:13 ` Linus Walleij
2013-06-10 13:41 ` Srinivas KANDAGATLA
2013-06-11 14:05 ` Srinivas KANDAGATLA
2013-06-11 20:13 ` Linus Walleij
2013-06-12 10:45 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 03/11] regmap: Add regmap_field APIs Srinivas KANDAGATLA
2013-06-11 10:48 ` Mark Brown
2013-06-11 11:36 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 04/11] mfd:stixxxx-syscfg: Add ST System Configuration support Srinivas KANDAGATLA
2013-06-10 13:16 ` Linus Walleij
2013-06-10 13:52 ` Srinivas KANDAGATLA
2013-06-10 14:02 ` Arnd Bergmann
2013-06-10 15:51 ` Srinivas KANDAGATLA
2013-06-11 7:41 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 05/11] pinctrl:stixxxx: Add pinctrl and pinconf support Srinivas KANDAGATLA
2013-06-16 12:17 ` Linus Walleij
2013-06-17 13:31 ` Srinivas KANDAGATLA
2013-06-17 16:27 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 07/11] ARM:stixxxx: Add STiH416 SOC support Srinivas KANDAGATLA
2013-06-10 13:52 ` Arnd Bergmann
2013-06-10 16:17 ` Srinivas KANDAGATLA
2013-06-14 7:12 ` Srinivas KANDAGATLA
2013-06-19 18:34 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 08/11] ARM:stixxxx: Add DEBUG_LL console support Srinivas KANDAGATLA
2013-06-10 9:27 ` [PATCH v2 09/11] ARM:stixxxx: Add stixxxx options to multi_v7_defconfig Srinivas KANDAGATLA
2013-06-10 10:40 ` Mark Rutland
2013-06-10 10:58 ` Srinivas KANDAGATLA
2013-06-10 13:15 ` Mark Rutland
2013-06-13 9:24 ` Srinivas KANDAGATLA
2013-06-17 9:32 ` Mark Rutland
2013-06-10 9:28 ` [PATCH v2 10/11] ARM:stih41x: Add B2000 board support Srinivas KANDAGATLA
2013-06-10 9:28 ` [PATCH v2 11/11] ARM:stih41x: Add B2020 " Srinivas KANDAGATLA
[not found] ` <1370856381-6644-1-git-send-email-srinivas.kandagatla@st.com>
2013-06-10 9:55 ` [PATCH v2 06/11] ARM:stixxxx: Add STiH415 SOC support Michal Simek
2013-06-10 11:08 ` Michal Simek
[not found] ` <CAHTX3d+dk3W_9b7SVUokWq4KYXnj=Z1=WPj5zJ-gUvJqqwE=+Q@mail.gmail.com>
2013-06-10 11:46 ` Srinivas KANDAGATLA
2013-06-10 23:19 ` Russell King - ARM Linux
2013-06-11 6:50 ` Srinivas KANDAGATLA
2013-06-13 11:56 ` Russell King - ARM Linux
2013-06-13 12:41 ` Srinivas KANDAGATLA
2013-06-13 12:47 ` Linus Walleij
2013-06-10 12:43 ` Linus Walleij
2013-06-10 16:38 ` Srinivas KANDAGATLA
2013-06-14 7:31 ` Srinivas KANDAGATLA
2013-06-19 18:59 ` Linus Walleij
2014-10-29 20:28 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 1/4] ARM: keystone: add pcie related options Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 2/4] ARM: keystone: defconfig: add options to enable PCI controller Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 3/4] ARM: dts: keystone: add DT bindings for PCI controller for port 0 Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 4/4] ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1 Murali Karicheri
2014-10-29 21:10 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs santosh shilimkar
2011-05-02 5:59 ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 1/3] ARM: pxa168: Add support for UART3 Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 2/3] ARM: pxa168: Add support for Ethernet Tanmay Upadhyay
2011-06-10 13:31 ` Eric Miao
2011-05-02 6:00 ` [PATCH 3/3] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-06-20 5:55 ` Eric Miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201302071941.22422.arnd@linaro.org \
--to=arnd@linaro$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox