From: manjunath.goudar@linaro•org (manjunath.goudar at linaro.org)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 03/10] USB: EHCI: make ehci-spear a separate driver
Date: Thu, 7 Feb 2013 23:04:00 +0530 [thread overview]
Message-ID: <5113e5e7.c84e420a.08c3.ffffbe87@mx.google.com> (raw)
In-Reply-To: <1360258447-27247-1-git-send-email-yes>
From: Manjunath Goudar <manjunath.goudar@linaro•org>
Separate the Spear host controller driver from ehci-hcd host code
into its own driver module.
Signed-off-by: Manjunath Goudar <manjunath.goudar@linaro•org>
Signed-off-by: Deepak Saxena <dsaxena@linaro•org>
Cc: Greg KH <greg@kroah•com>
Cc: Alan Stern <stern@rowland•harvard.edu>
Cc: Viresh Kumar <viresh.linux@gmail•com>
Cc: Shiraz Hashim <shiraz.hashim@st•com>
Cc: linux-usb at vger.kernel.org
Cc: spear-devel at list.st.com
---
drivers/usb/host/Kconfig | 8 +++++
drivers/usb/host/Makefile | 1 +
drivers/usb/host/ehci-hcd.c | 6 +---
drivers/usb/host/ehci-spear.c | 77 ++++++++++++++++++++++-------------------
4 files changed, 51 insertions(+), 41 deletions(-)
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 11e102e..4413075 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -162,6 +162,14 @@ config USB_EHCI_HCD_OMAP
Enables support for the on-chip EHCI controller on
OMAP3 and later chips.
+config USB_EHCI_HCD_SPEAR
+ tristate "Support for ST spear on-chip EHCI USB controller"
+ depends on USB_EHCI_HCD && PLAT_SPEAR
+ default y
+ ---help---
+ Enables support for the on-chip EHCI controller on
+ ST spear chips.
+
config USB_EHCI_MSM
bool "Support for MSM on-chip EHCI USB controller"
depends on USB_EHCI_HCD && ARCH_MSM
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index b54a597..c97f4ab 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_HCD_PLATFORM) += ehci-platform.o
obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
obj-$(CONFIG_USB_EHCI_HCD_OMAP) += ehci-omap.o
+obj-$(CONFIG_USB_EHCI_HCD_SPEAR)+= ehci-spear.o
obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD) += isp1362-hcd.o
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index aaf93ca..68cea63 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1292,11 +1292,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER vt8500_ehci_driver
#endif
-#ifdef CONFIG_PLAT_SPEAR
-#include "ehci-spear.c"
-#define PLATFORM_DRIVER spear_ehci_hcd_driver
-#endif
-
#ifdef CONFIG_USB_EHCI_MSM
#include "ehci-msm.c"
#define PLATFORM_DRIVER ehci_msm_driver
@@ -1343,6 +1338,7 @@ MODULE_LICENSE ("GPL");
!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
!defined(PLATFORM_DRIVER) && \
!IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
+ !IS_ENABLED(CONFIG_PLAT_SPEAR) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && \
!defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 466c1bb..6e42cee 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -11,11 +11,25 @@
* more details.
*/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/io.h>
+
+
#include <linux/clk.h>
#include <linux/jiffies.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm.h>
+#include <linux/dma-mapping.h>
+
+#include "ehci.h"
+
+#define DRIVER_DESC "EHCI spear driver"
+
+static const char hcd_name[] = "ehci-spear";
struct spear_ehci {
struct ehci_hcd ehci;
@@ -43,40 +57,7 @@ static int ehci_spear_setup(struct usb_hcd *hcd)
return ehci_setup(hcd);
}
-
-static const struct hc_driver ehci_spear_hc_driver = {
- .description = hcd_name,
- .product_desc = "SPEAr EHCI",
- .hcd_priv_size = sizeof(struct spear_ehci),
-
- /* generic hardware linkage */
- .irq = ehci_irq,
- .flags = HCD_MEMORY | HCD_USB2,
-
- /* basic lifecycle operations */
- .reset = ehci_spear_setup,
- .start = ehci_run,
- .stop = ehci_stop,
- .shutdown = ehci_shutdown,
-
- /* managing i/o requests and associated device resources */
- .urb_enqueue = ehci_urb_enqueue,
- .urb_dequeue = ehci_urb_dequeue,
- .endpoint_disable = ehci_endpoint_disable,
- .endpoint_reset = ehci_endpoint_reset,
-
- /* scheduling support */
- .get_frame_number = ehci_get_frame,
-
- /* root hub support */
- .hub_status_data = ehci_hub_status_data,
- .hub_control = ehci_hub_control,
- .bus_suspend = ehci_bus_suspend,
- .bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
- .port_handed_over = ehci_port_handed_over,
- .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
-};
+static struct hc_driver __read_mostly ehci_spear_hc_driver;
#ifdef CONFIG_PM
static int ehci_spear_drv_suspend(struct device *dev)
@@ -209,11 +190,35 @@ static struct platform_driver spear_ehci_hcd_driver = {
.remove = spear_ehci_hcd_drv_remove,
.shutdown = usb_hcd_platform_shutdown,
.driver = {
- .name = "spear-ehci",
+ .name = hcd_name,
.bus = &platform_bus_type,
.pm = &ehci_spear_pm_ops,
.of_match_table = of_match_ptr(spear_ehci_id_table),
}
};
-MODULE_ALIAS("platform:spear-ehci");
+
+static const struct ehci_driver_overrides spear_overrides __initdata = {
+ .reset = ehci_spear_setup,
+};
+
+static int __init ehci_spear_init(void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_info("%s: " DRIVER_DESC "\n", hcd_name);
+
+ ehci_init_driver(&ehci_spear_hc_driver, &spear_overrides);
+ return platform_driver_register(&spear_ehci_hcd_driver);
+}
+module_init(ehci_spear_init);
+
+static void __exit ehci_spear_cleanup(void)
+{
+ platform_driver_unregister(&spear_ehci_hcd_driver);
+}
+module_exit(ehci_spear_cleanup);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
--
1.7.9.5
next prev parent reply other threads:[~2013-02-07 17:34 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <yes>
2010-08-11 5:21 ` [PATCH v3] OpenRD: Enable SD/UART selection for serial port 1 Tanmay Upadhyay
2010-08-11 7:27 ` Russell King - ARM Linux
2011-06-15 0:46 ` [PATCH] Add ok2440 development board support Wu DaoGuang
2011-06-22 5:55 ` [PATCH 3/3 v2] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-07-06 12:20 ` Daniel Mack
2011-07-06 12:44 ` Eric Miao
2011-07-21 4:54 ` [PATCHV2] OMAP4: OPP: add OMAP4460 definitions Vishwanath BS
[not found] ` <4e27b0d0.100e8e0a.43e0.ffffe6d9SMTPIN_ADDED@mx.google.com>
2011-07-21 4:56 ` Vishwanath Sripathy
2011-10-03 0:32 ` [PATCH 1/1] ARM: Make debug UART optional for S3C devices Thiago A. Correa
2011-10-10 14:44 ` Thiago A. Corrêa
2013-02-07 17:33 ` [PATCH 00/10] usb: ehci: more bus glues as separate modules manjunath.goudar at linaro.org
2013-02-07 20:13 ` Ezequiel Garcia
2013-02-08 15:23 ` Alan Stern
[not found] ` <1360258447-27247-1-git-send-email-yes>
2013-02-07 17:33 ` [PATCH 01/10] USB:Changed omap2plus_defconfig to support OMAP USB static driver manjunath.goudar at linaro.org
2013-02-07 17:33 ` [PATCH 02/10] USB: EHCI: make ehci-omap a separate driver manjunath.goudar at linaro.org
2013-02-08 7:42 ` Felipe Balbi
2013-02-08 8:56 ` Roger Quadros
2013-02-07 17:34 ` manjunath.goudar at linaro.org [this message]
2013-02-08 4:27 ` [PATCH 03/10] USB: EHCI: make ehci-spear " Viresh Kumar
2013-02-07 17:34 ` [PATCH 04/10] USB: EHCI: make ehci-orion " manjunath.goudar at linaro.org
2013-02-07 19:41 ` Arnd Bergmann
2013-02-08 10:38 ` Florian Fainelli
2013-02-07 17:34 ` [PATCH 05/10] USB: EHCI: make ehci-atmel " manjunath.goudar at linaro.org
2013-02-08 2:58 ` Bo Shen
2013-06-12 11:53 ` Jean-Christophe PLAGNIOL-VILLARD
2013-02-07 17:34 ` [PATCH 06/10] USB: EHCI: make ehci-s5p " manjunath.goudar at linaro.org
2013-02-07 18:49 ` Stephen Warren
2013-02-07 17:34 ` [PATCH 07/10] USB: EHCI: make ehci-mv " manjunath.goudar at linaro.org
2013-02-07 17:34 ` [PATCH 08/10] USB: EHCI: make ehci-vt8500 " manjunath.goudar at linaro.org
2013-02-07 18:54 ` Tony Prisk
2013-02-07 17:34 ` [PATCH 09/10] USB: EHCI: make ehci-msm " manjunath.goudar at linaro.org
2013-02-07 18:48 ` Stephen Warren
2013-02-07 19:05 ` David Brown
2013-02-07 17:34 ` [PATCH 10/10] USB: EHCI: make ehci-w90X900 " manjunath.goudar at linaro.org
2013-06-10 9:17 ` [PATCH v2 00/11] ARM:STixxxx: Add STixxxx platform and board support Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 01/11] serial:st-asc: Add ST ASC driver Srinivas KANDAGATLA
2013-06-10 9:35 ` Russell King - ARM Linux
2013-06-10 11:53 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 02/11] clocksource:global_timer: Add ARM global timer support Srinivas KANDAGATLA
2013-06-10 13:13 ` Linus Walleij
2013-06-10 13:41 ` Srinivas KANDAGATLA
2013-06-11 14:05 ` Srinivas KANDAGATLA
2013-06-11 20:13 ` Linus Walleij
2013-06-12 10:45 ` Srinivas KANDAGATLA
2013-06-10 9:21 ` [PATCH v2 03/11] regmap: Add regmap_field APIs Srinivas KANDAGATLA
2013-06-11 10:48 ` Mark Brown
2013-06-11 11:36 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 04/11] mfd:stixxxx-syscfg: Add ST System Configuration support Srinivas KANDAGATLA
2013-06-10 13:16 ` Linus Walleij
2013-06-10 13:52 ` Srinivas KANDAGATLA
2013-06-10 14:02 ` Arnd Bergmann
2013-06-10 15:51 ` Srinivas KANDAGATLA
2013-06-11 7:41 ` Srinivas KANDAGATLA
2013-06-10 9:22 ` [PATCH v2 05/11] pinctrl:stixxxx: Add pinctrl and pinconf support Srinivas KANDAGATLA
2013-06-16 12:17 ` Linus Walleij
2013-06-17 13:31 ` Srinivas KANDAGATLA
2013-06-17 16:27 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 07/11] ARM:stixxxx: Add STiH416 SOC support Srinivas KANDAGATLA
2013-06-10 13:52 ` Arnd Bergmann
2013-06-10 16:17 ` Srinivas KANDAGATLA
2013-06-14 7:12 ` Srinivas KANDAGATLA
2013-06-19 18:34 ` Linus Walleij
2013-06-10 9:27 ` [PATCH v2 08/11] ARM:stixxxx: Add DEBUG_LL console support Srinivas KANDAGATLA
2013-06-10 9:27 ` [PATCH v2 09/11] ARM:stixxxx: Add stixxxx options to multi_v7_defconfig Srinivas KANDAGATLA
2013-06-10 10:40 ` Mark Rutland
2013-06-10 10:58 ` Srinivas KANDAGATLA
2013-06-10 13:15 ` Mark Rutland
2013-06-13 9:24 ` Srinivas KANDAGATLA
2013-06-17 9:32 ` Mark Rutland
2013-06-10 9:28 ` [PATCH v2 10/11] ARM:stih41x: Add B2000 board support Srinivas KANDAGATLA
2013-06-10 9:28 ` [PATCH v2 11/11] ARM:stih41x: Add B2020 " Srinivas KANDAGATLA
[not found] ` <1370856381-6644-1-git-send-email-srinivas.kandagatla@st.com>
2013-06-10 9:55 ` [PATCH v2 06/11] ARM:stixxxx: Add STiH415 SOC support Michal Simek
2013-06-10 11:08 ` Michal Simek
[not found] ` <CAHTX3d+dk3W_9b7SVUokWq4KYXnj=Z1=WPj5zJ-gUvJqqwE=+Q@mail.gmail.com>
2013-06-10 11:46 ` Srinivas KANDAGATLA
2013-06-10 23:19 ` Russell King - ARM Linux
2013-06-11 6:50 ` Srinivas KANDAGATLA
2013-06-13 11:56 ` Russell King - ARM Linux
2013-06-13 12:41 ` Srinivas KANDAGATLA
2013-06-13 12:47 ` Linus Walleij
2013-06-10 12:43 ` Linus Walleij
2013-06-10 16:38 ` Srinivas KANDAGATLA
2013-06-14 7:31 ` Srinivas KANDAGATLA
2013-06-19 18:59 ` Linus Walleij
2014-10-29 20:28 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 1/4] ARM: keystone: add pcie related options Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 2/4] ARM: keystone: defconfig: add options to enable PCI controller Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 3/4] ARM: dts: keystone: add DT bindings for PCI controller for port 0 Murali Karicheri
2014-10-29 20:28 ` [PATCH v2 4/4] ARM: dts: keystone-k2e: add DT bindings for PCI controller for port 1 Murali Karicheri
2014-10-29 21:10 ` [PATCH v2 0/4] Enable PCI controller for Keystone SoCs santosh shilimkar
2011-05-02 5:59 ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 1/3] ARM: pxa168: Add support for UART3 Tanmay Upadhyay
2011-05-02 5:59 ` [PATCH 2/3] ARM: pxa168: Add support for Ethernet Tanmay Upadhyay
2011-06-10 13:31 ` Eric Miao
2011-05-02 6:00 ` [PATCH 3/3] ARM: pxa168: Add board support for gplugD Tanmay Upadhyay
2011-06-20 5:55 ` Eric Miao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5113e5e7.c84e420a.08c3.ffffbe87@mx.google.com \
--to=manjunath.goudar@linaro$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox