From: alexandre.belloni@free-electrons•com (Alexandre Belloni)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support
Date: Wed, 12 Feb 2014 18:28:44 +0100 [thread overview]
Message-ID: <20140212172844.GE11498@piout.net> (raw)
In-Reply-To: <1392199607-27452-4-git-send-email-jjhiblot@traphandler.com>
Hi,
On 12/02/2014 at 11:06:42 +0100, Jean-Jacques Hiblot wrote :
> This patch adds support for the Device Tree on a sam9261-based platform
>
> Signed-off-by: Jean-Jacques Hiblot <jjhiblot@traphandler•com>
> ---
> arch/arm/boot/dts/at91sam9261.dtsi | 740 +++++++++++++++++++++++++++++++++++++
> arch/arm/mach-at91/at91sam9261.c | 17 +
> 2 files changed, 757 insertions(+)
> create mode 100644 arch/arm/boot/dts/at91sam9261.dtsi
[...]
> +
> + apb {
> + compatible = "simple-bus";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + tcb0: timer at fffa0000 {
> + compatible = "atmel,at91rm9200-tcb";
> + reg = <0xfffa0000 0x100>;
> + interrupts = < 17 IRQ_TYPE_LEVEL_HIGH 0
> + 18 IRQ_TYPE_LEVEL_HIGH 0
> + 19 IRQ_TYPE_LEVEL_HIGH 0
> + >;
> + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
> + clock-names = "t0_clk", "t1_clk", "t2_clk";
> + };
> +
> + usb1: gadget at fffa4000 {
> + compatible = "atmel,at91rm9200-udc";
> + reg = <0xfffa4000 0x4000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>;
> + clocks = <&usb>, <&udc_clk>, <&udpck>;
> + clock-names = "usb_clk", "udc_clk", "udpck";
> + status = "disabled";
> + };
> +
> + mmc0: mmc at fffa8000 {
> + compatible = "atmel,hsmci";
> + reg = <0xfffa8000 0x600>;
> + interrupts = <9 IRQ_TYPE_LEVEL_HIGH 0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mmc0_clk>, <&pinctrl_mmc0_slot0_cmd_dat0>, <&pinctrl_mmc0_slot0_dat1_3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&mci0_clk>;
> + clock-names = "mci_clk";
> + status = "disabled";
> + };
> +
> + i2c0: i2c at fffac000 {
> + compatible = "atmel,at91sam9261-i2c";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_i2c_twi>;
> + reg = <0xfffac000 0x100>;
> + interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + clocks = <&twi0_clk>;
> + status = "disabled";
> + };
> +
> + usart0: serial at fffb0000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb0000 0x200>;
> + interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart0>;
> + clocks = <&usart0_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + usart1: serial at fffb4000 {
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb4000 0x200>;
> + interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart1>;
> + clocks = <&usart1_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + usart2: serial at fffb8000{
> + compatible = "atmel,at91sam9260-usart";
> + reg = <0xfffb8000 0x200>;
> + interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
> + atmel,use-dma-rx;
> + atmel,use-dma-tx;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usart2>;
> + clocks = <&usart2_clk>;
> + clock-names = "usart";
> + status = "disabled";
> + };
> +
> + ssc0: ssc at fffbc000 {
> + compatible = "atmel,at91rm9200-ssc";
> + reg = <0xfffbc000 0x4000>;
> + interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
> + status = "disabled";
> + };
> +
> + ssc1: ssc at fffc0000 {
> + compatible = "atmel,at91rm9200-ssc";
> + reg = <0xfffc0000 0x4000>;
> + interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
> + status = "disabled";
> + };
> +
> + spi0: spi at fffc8000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0xfffc8000 0x200>;
> + cs-gpios = <0>, <0>, <0>, <0>;
> + interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi0>;
> + clocks = <&spi0_clk>;
> + clock-names = "spi_clk";
> + status = "disabled";
> + };
> +
> + spi1: spi at fffcc000 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + compatible = "atmel,at91rm9200-spi";
> + reg = <0xfffcc000 0x200>;
> + interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1>;
> + clocks = <&spi1_clk>;
> + clock-names = "spi_clk";
> + status = "disabled";
> + };
> +
> + ramc: ramc at ffffea00 {
> + compatible = "atmel,at91sam9260-sdramc";
> + reg = <0xffffea00 0x200>;
> + };
> +
You probably copied/pasted it but according to the block diagram, the
sdram controller is not under the apb.
> + matrix: matrix at ffffee00 {
> + compatible = "atmel,at91sam9261-bus-matrix";
> + reg = <0xffffee00 0x200>;
> + };
> +
Same here, the apb is actually under the bus matrix.
I don't know whether it can be represented another way though.
--
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
next prev parent reply other threads:[~2014-02-12 17:28 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-12 10:06 [PATCH v4 0/8] Device Tree support for the at91sam9261ek Jean-Jacques Hiblot
2014-02-12 10:06 ` [PATCH v4 1/8] at91: dt: Adds support for the bus matrix declaration in the DT Jean-Jacques Hiblot
2014-02-12 10:45 ` Gregory CLEMENT
2014-02-12 10:54 ` Nicolas Ferre
2014-02-12 10:06 ` [PATCH v4 2/8] at91: pinctrl: don't request GPIOs used for interrupts but lock them as IRQ Jean-Jacques Hiblot
2014-02-12 17:47 ` Nicolas Ferre
2014-02-24 13:25 ` Linus Walleij
2014-02-25 9:35 ` Jean-Jacques Hiblot
2014-02-25 9:47 ` Jean-Jacques Hiblot
2014-02-12 10:06 ` [PATCH v4 3/8] at91: dt: Add at91sam9261 dt SoC support Jean-Jacques Hiblot
2014-02-12 17:28 ` Alexandre Belloni [this message]
2014-02-12 19:47 ` Jean-Jacques Hiblot
2014-02-13 8:10 ` Nicolas Ferre
2014-02-13 8:54 ` Alexandre Belloni
2014-02-12 21:04 ` Alexandre Belloni
2014-02-13 6:11 ` Jean-Jacques Hiblot
2014-02-12 10:06 ` [PATCH v4 4/8] at91: dt: defconfig: Added the sam9261 to the list of DT-enabled SOCs Jean-Jacques Hiblot
2014-02-12 10:06 ` [PATCH v4 5/8] at91: dt: sam9261: Device Tree support for the at91sam9261ek Jean-Jacques Hiblot
2014-02-12 10:06 ` [PATCH v4 6/8] at91: updated the at91_dt_defconfig with support for the ADS7846 Jean-Jacques Hiblot
2014-02-12 10:06 ` [PATCH v4 7/8] ARM: at91: prepare common clk transition for sam9261 SoC Jean-Jacques Hiblot
2014-02-12 10:06 ` [PATCH v4 8/8] ARM: at91: move sam9261 SoC to common clk Jean-Jacques Hiblot
2014-02-12 11:14 ` [PATCH v4 0/8] Device Tree support for the at91sam9261ek Gregory CLEMENT
2014-02-12 12:34 ` Thomas Petazzoni
2014-02-12 12:36 ` Jean-Jacques Hiblot
2014-02-12 12:44 ` Thomas Petazzoni
2014-02-12 13:01 ` Jean-Jacques Hiblot
2014-02-12 12:35 ` Jean-Jacques Hiblot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20140212172844.GE11498@piout.net \
--to=alexandre.belloni@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox