From: john@metanate•com (John Keeping)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2 03/26] drm/rockchip: dw-mipi-dsi: pass mode in where needed
Date: Sat, 21 Jan 2017 16:31:05 +0000 [thread overview]
Message-ID: <20170121163128.22240-4-john@metanate.com> (raw)
In-Reply-To: <20170121163128.22240-1-john@metanate.com>
This shows that we only use the mode from the enable function and
prepares us to remove the "mode" field and the mode_set hook in the next
commit.
Signed-off-by: John Keeping <john@metanate•com>
---
New in v2
---
drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 41 ++++++++++++++++++----------------
1 file changed, 22 insertions(+), 19 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index bbd992299f73..cdbd25087e83 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -330,11 +330,11 @@ static int max_mbps_to_testdin(unsigned int max_mbps)
* The controller should generate 2 frames before
* preparing the peripheral.
*/
-static void dw_mipi_dsi_wait_for_two_frames(struct dw_mipi_dsi *dsi)
+static void dw_mipi_dsi_wait_for_two_frames(struct drm_display_mode *mode)
{
int refresh, two_frames;
- refresh = drm_mode_vrefresh(dsi->mode);
+ refresh = drm_mode_vrefresh(mode);
two_frames = DIV_ROUND_UP(MSEC_PER_SEC, refresh) * 2;
msleep(two_frames);
}
@@ -459,7 +459,8 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
return ret;
}
-static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
+static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode)
{
unsigned int i, pre;
unsigned long mpclk, pllref, tmp;
@@ -474,7 +475,7 @@ static int dw_mipi_dsi_get_lane_bps(struct dw_mipi_dsi *dsi)
return bpp;
}
- mpclk = DIV_ROUND_UP(dsi->mode->clock, MSEC_PER_SEC);
+ mpclk = DIV_ROUND_UP(mode->clock, MSEC_PER_SEC);
if (mpclk) {
/* take 1 / 0.9, since mbps must big than bandwidth of RGB */
tmp = mpclk * (bpp / dsi->lanes) * 10 / 9;
@@ -742,43 +743,44 @@ static void dw_mipi_dsi_command_mode_config(struct dw_mipi_dsi *dsi)
/* Get lane byte clock cycles. */
static u32 dw_mipi_dsi_get_hcomponent_lbcc(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode,
u32 hcomponent)
{
u32 frac, lbcc;
lbcc = hcomponent * dsi->lane_mbps * MSEC_PER_SEC / 8;
- frac = lbcc % dsi->mode->clock;
- lbcc = lbcc / dsi->mode->clock;
+ frac = lbcc % mode->clock;
+ lbcc = lbcc / mode->clock;
if (frac)
lbcc++;
return lbcc;
}
-static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi)
+static void dw_mipi_dsi_line_timer_config(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode)
{
u32 htotal, hsa, hbp, lbcc;
- struct drm_display_mode *mode = dsi->mode;
htotal = mode->htotal;
hsa = mode->hsync_end - mode->hsync_start;
hbp = mode->htotal - mode->hsync_end;
- lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, htotal);
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, htotal);
dsi_write(dsi, DSI_VID_HLINE_TIME, lbcc);
- lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hsa);
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hsa);
dsi_write(dsi, DSI_VID_HSA_TIME, lbcc);
- lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, hbp);
+ lbcc = dw_mipi_dsi_get_hcomponent_lbcc(dsi, mode, hbp);
dsi_write(dsi, DSI_VID_HBP_TIME, lbcc);
}
-static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi)
+static void dw_mipi_dsi_vertical_timing_config(struct dw_mipi_dsi *dsi,
+ struct drm_display_mode *mode)
{
u32 vactive, vsa, vfp, vbp;
- struct drm_display_mode *mode = dsi->mode;
vactive = mode->vdisplay;
vsa = mode->vsync_end - mode->vsync_start;
@@ -852,11 +854,12 @@ static void dw_mipi_dsi_encoder_disable(struct drm_encoder *encoder)
static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
{
struct dw_mipi_dsi *dsi = encoder_to_dsi(encoder);
+ struct drm_display_mode *mode = dsi->mode;
int mux = drm_of_encoder_active_endpoint_id(dsi->dev->of_node, encoder);
u32 val;
int ret;
- ret = dw_mipi_dsi_get_lane_bps(dsi);
+ ret = dw_mipi_dsi_get_lane_bps(dsi, mode);
if (ret < 0)
return;
@@ -866,13 +869,13 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
}
dw_mipi_dsi_init(dsi);
- dw_mipi_dsi_dpi_config(dsi, dsi->mode);
+ dw_mipi_dsi_dpi_config(dsi, mode);
dw_mipi_dsi_packet_handler_config(dsi);
dw_mipi_dsi_video_mode_config(dsi);
- dw_mipi_dsi_video_packet_config(dsi, dsi->mode);
+ dw_mipi_dsi_video_packet_config(dsi, mode);
dw_mipi_dsi_command_mode_config(dsi);
- dw_mipi_dsi_line_timer_config(dsi);
- dw_mipi_dsi_vertical_timing_config(dsi);
+ dw_mipi_dsi_line_timer_config(dsi, mode);
+ dw_mipi_dsi_vertical_timing_config(dsi, mode);
dw_mipi_dsi_dphy_timing_config(dsi);
dw_mipi_dsi_dphy_interface_config(dsi);
dw_mipi_dsi_clear_err(dsi);
@@ -880,7 +883,7 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder)
dev_err(dsi->dev, "failed to prepare panel\n");
dw_mipi_dsi_phy_init(dsi);
- dw_mipi_dsi_wait_for_two_frames(dsi);
+ dw_mipi_dsi_wait_for_two_frames(mode);
dw_mipi_dsi_set_mode(dsi, DW_MIPI_DSI_VID_MODE);
drm_panel_enable(dsi->panel);
--
2.11.0.197.gb556de5.dirty
next prev parent reply other threads:[~2017-01-21 16:31 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-01-21 16:31 [PATCH v2 00/26] drm/rockchip: MIPI fixes & improvements John Keeping
2017-01-21 16:31 ` [PATCH v2 01/26] drm/rockchip: dw-mipi-dsi: don't configure hardware in mode_set for MIPI John Keeping
2017-01-22 3:58 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 02/26] drm/rockchip: dw-mipi-dsi: rename commit hook to enable John Keeping
2017-01-21 16:31 ` John Keeping [this message]
2017-01-22 4:00 ` [PATCH v2 03/26] drm/rockchip: dw-mipi-dsi: pass mode in where needed Chris Zhong
2017-01-21 16:31 ` [PATCH v2 04/26] drm/rockchip: dw-mipi-dsi: remove mode_set hook John Keeping
2017-01-22 6:08 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 05/26] drm/rockchip: dw-mipi-dsi: fix command header writes John Keeping
2017-01-21 16:31 ` [PATCH v2 06/26] drm/rockchip: dw-mipi-dsi: fix generic packet status check John Keeping
2017-01-22 6:24 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 07/26] drm/rockchip: dw-mipi-dsi: avoid out-of-bounds read on tx_buf John Keeping
2017-01-22 6:42 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 08/26] drm/rockchip: dw-mipi-dsi: include bad value in error message John Keeping
2017-01-22 6:44 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 09/26] drm/rockchip: dw-mipi-dsi: respect message flags John Keeping
2017-01-22 7:14 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 10/26] drm/rockchip: dw-mipi-dsi: only request HS clock when required John Keeping
2017-01-22 8:10 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 11/26] drm/rockchip: dw-mipi-dsi: don't assume buffer is aligned John Keeping
2017-01-22 8:16 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 12/26] drm/rockchip: dw-mipi-dsi: prepare panel after phy init John Keeping
2017-01-22 8:22 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 13/26] drm/rockchip: dw-mipi-dsi: allow commands in panel_disable John Keeping
2017-01-22 8:37 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 14/26] drm/rockchip: dw-mipi-dsi: fix escape clock rate John Keeping
2017-01-22 9:37 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 15/26] drm/rockchip: dw-mipi-dsi: ensure PHY is reset John Keeping
2017-01-22 9:37 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 16/26] drm/rockchip: dw-mipi-dsi: configure bias and bandgap before enable John Keeping
2017-01-21 16:31 ` [PATCH v2 17/26] drm/rockchip: dw-mipi-dsi: don't enable PHY PLL until it's configured John Keeping
2017-01-22 10:07 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 18/26] drm/rockchip: dw-mipi-dsi: properly configure PHY timing John Keeping
2017-01-22 3:06 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 19/26] drm/rockchip: dw-mipi-dsi: improve PLL configuration John Keeping
2017-01-23 1:38 ` Chris Zhong
2017-01-23 12:49 ` John Keeping
2017-01-24 2:42 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 20/26] drm/rockchip: dw-mipi-dsi: use specific poll helper John Keeping
2017-01-23 0:49 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 21/26] drm/rockchip: dw-mipi-dsi: use positive check for N{H, V}SYNC John Keeping
2017-01-21 16:31 ` [PATCH v2 22/26] drm/rockchip: vop: test for P{H,V}SYNC John Keeping
2017-01-23 7:12 ` Mark yao
2017-01-21 16:31 ` [PATCH v2 23/26] drm/rockchip: dw-mipi-dsi: defer probe if panel is not loaded John Keeping
2017-01-21 16:31 ` [PATCH v2 24/26] drm/rockchip: dw-mipi-dsi: support non-burst modes John Keeping
2017-01-23 6:11 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 25/26] drm/rockchip: dw-mipi-dsi: add reset control John Keeping
2017-01-23 6:12 ` Chris Zhong
2017-01-21 16:31 ` [PATCH v2 26/26] drm/rockchip: dw-mipi-dsi: support read commands John Keeping
2017-01-22 3:08 ` Chris Zhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170121163128.22240-4-john@metanate.com \
--to=john@metanate$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox