public inbox for linux-arm-kernel@lists.infradead.org 
 help / color / mirror / Atom feed
* [PATCHv4 0/1] arm64: dts: add basic DTS for imx8qm-rom7720 board
@ 2019-10-25  7:37 Oliver Graute
  2019-10-25  7:37 ` [PATCHv4 1/1] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board Oliver Graute
  0 siblings, 1 reply; 3+ messages in thread
From: Oliver Graute @ 2019-10-25  7:37 UTC (permalink / raw)
  To: shawnguo@kernel•org
  Cc: aisheng.dong@nxp•com, Mark Rutland, Pramod Kumar,
	devicetree@vger•kernel.org, Oliver Graute,
	linux-kernel@vger•kernel.org, Li Yang, Gary Bisson,
	oliver.graute@gmail•com, Rob Herring, Jacky Bai, NXP Linux Team,
	Pengutronix Kernel Team, Manivannan Sadhasivam, Bhaskar Upadhaya,
	Fabio Estevam, Sascha Hauer, linux-arm-kernel@lists•infradead.org,
	Lucas Stach

This patch is ontop of Aisheng Dongs clock driver and imx8 changes for the
imx8qm

https://patchwork.kernel.org/patch/11143321/
https://patchwork.kernel.org/patch/11138099/

This patch is based on next-20190904

Oliver Graute (1):
  arm64: dts: add basic DTS for imx8qm-rom7720-a1 board

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8qm-rom7720-a1.dts  | 299 ++++++++++++++++++
 2 files changed, 300 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 3+ messages in thread
* [PATCHv4 1/1] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board
  2019-10-25  7:37 [PATCHv4 0/1] arm64: dts: add basic DTS for imx8qm-rom7720 board Oliver Graute
@ 2019-10-25  7:37 ` Oliver Graute
  2019-10-28  2:01   ` kbuild test robot
  0 siblings, 1 reply; 3+ messages in thread
From: Oliver Graute @ 2019-10-25  7:37 UTC (permalink / raw)
  To: shawnguo@kernel•org
  Cc: aisheng.dong@nxp•com, Mark Rutland, Pramod Kumar, Anson Huang,
	devicetree@vger•kernel.org, Oliver Graute,
	linux-kernel@vger•kernel.org, Li Yang, Richard Hu,
	oliver.graute@gmail•com, Rob Herring, Bhaskar Upadhaya,
	NXP Linux Team, Pengutronix Kernel Team, Manivannan Sadhasivam,
	Fabio Estevam, Sascha Hauer, linux-arm-kernel@lists•infradead.org,
	Lucas Stach

Add basic dts support for a Advantech iMX8QM Qseven Board

Signed-off-by: Oliver Graute <oliver.graute@kococonnector•com>
---
Changelog:
v4:
- added reg_usdhc3_vmmc node
- added usdhc3 node

 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8qm-rom7720-a1.dts  | 299 ++++++++++++++++++
 2 files changed, 300 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 93fce8f0c66d..0de6d384b5ea 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -30,5 +30,6 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mq-nitrogen.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-pico-pi.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-rmb3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mq-zii-ultra-zest.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8qm-rom7720-a1.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-ai_ml.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-mek.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts b/arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts
new file mode 100644
index 000000000000..b7b6f96f224c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+* Copyright 2017-2018 NXP
+* Copyright (C) 2019 Oliver Graute <oliver.graute@kococonnector•com>
+*/
+/dts-v1/;
+
+#include "imx8qm.dtsi"
+
+/ {
+	model = "Advantech iMX8QM Qseven series";
+	compatible = "fsl,imx8qm";
+
+	board {
+		compatible = "proc-board";
+		board-type = "ROM-7720_A1";
+		board-cpu  = "iMX8QM";
+	};
+
+	chosen {
+		bootargs = "console=ttyLP0,115200 earlycon=lpuart32,0x5a060000,115200";
+		stdout-path = &lpuart0;
+	};
+
+	cpus {
+		/delete-node/ cpu-map;
+		/delete-node/ cpu@100;
+		/delete-node/ cpu@101;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reg_usdhc2_vmmc: usdhc2_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sw-3p3-sd1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio4 7 GPIO_ACTIVE_HIGH>;
+		off-on-delay = <3000>;
+		enable-active-high;
+	};
+
+	reg_usdhc3_vmmc: usdhc3_vmmc {
+		compatible = "regulator-fixed";
+		regulator-name = "sw-3p3-sd2";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&lsio_gpio4 9 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&lpuart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_lpuart0>;
+	status = "okay";
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	phy-mode = "rgmii-txid";
+	phy-handle = <&ethphy0>;
+	fsl,magic-packet;
+	fsl,rgmii_rxc_dly;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <4>;
+			at803x,eee-disabled;
+			at803x,vddio-1p8v;
+		};
+	};
+};
+
+&lsio_gpio4 {
+        status = "okay";
+};
+
+&lsio_gpio5 {
+        status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio5 22 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio5 21 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>, <&pinctrl_usdhc3_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>, <&pinctrl_usdhc3_gpio>;
+	bus-width = <4>;
+	cd-gpios = <&lsio_gpio4 12 GPIO_ACTIVE_LOW>;
+	wp-gpios = <&lsio_gpio4 11 GPIO_ACTIVE_HIGH>;
+	vmmc-supply = <&reg_usdhc3_vmmc>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_fec1: fec1grp {
+		fsl,pins = <
+			IMX8QM_COMP_CTL_GPIO_1V8_3V3_ENET_ENETB_PAD	0x000014a0
+			IMX8QM_ENET0_MDC_CONN_ENET0_MDC			0x06000020
+			IMX8QM_ENET0_MDIO_CONN_ENET0_MDIO		0x06000020
+			IMX8QM_ENET0_RGMII_TX_CTL_CONN_ENET0_RGMII_TX_CTL	0x00000060
+			IMX8QM_ENET0_RGMII_TXC_CONN_ENET0_RGMII_TXC	0x00000060
+			IMX8QM_ENET0_RGMII_TXD0_CONN_ENET0_RGMII_TXD0	0x00000060
+			IMX8QM_ENET0_RGMII_TXD1_CONN_ENET0_RGMII_TXD1	0x00000060
+			IMX8QM_ENET0_RGMII_TXD2_CONN_ENET0_RGMII_TXD2	0x00000060
+			IMX8QM_ENET0_RGMII_TXD3_CONN_ENET0_RGMII_TXD3	0x00000060
+			IMX8QM_ENET0_RGMII_RXC_CONN_ENET0_RGMII_RXC	0x00000060
+			IMX8QM_ENET0_RGMII_RX_CTL_CONN_ENET0_RGMII_RX_CTL	0x00000060
+			IMX8QM_ENET0_RGMII_RXD0_CONN_ENET0_RGMII_RXD0	0x00000060
+			IMX8QM_ENET0_RGMII_RXD1_CONN_ENET0_RGMII_RXD1	0x00000060
+			IMX8QM_ENET0_RGMII_RXD2_CONN_ENET0_RGMII_RXD2	0x00000060
+			IMX8QM_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3	0x00000060
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			IMX8QM_USB_SS3_TC0_LSIO_GPIO4_IO03	0x06000048
+		>;
+	};
+
+	pinctrl_lpuart0: lpuart0grp {
+		fsl,pins = <
+			IMX8QM_UART0_RX_DMA_UART0_RX		0x06000020
+			IMX8QM_UART0_TX_DMA_UART0_TX		0x06000020
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK		0x06000041
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD		0x00000021
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000021
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000021
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000021
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000021
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000021
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000021
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000021
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000021
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000041
+			IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+			IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			IMX8QM_EMMC0_CLK_CONN_EMMC0_CLK		0x06000040
+			IMX8QM_EMMC0_CMD_CONN_EMMC0_CMD		0x00000020
+			IMX8QM_EMMC0_DATA0_CONN_EMMC0_DATA0	0x00000020
+			IMX8QM_EMMC0_DATA1_CONN_EMMC0_DATA1	0x00000020
+			IMX8QM_EMMC0_DATA2_CONN_EMMC0_DATA2	0x00000020
+			IMX8QM_EMMC0_DATA3_CONN_EMMC0_DATA3	0x00000020
+			IMX8QM_EMMC0_DATA4_CONN_EMMC0_DATA4	0x00000020
+			IMX8QM_EMMC0_DATA5_CONN_EMMC0_DATA5	0x00000020
+			IMX8QM_EMMC0_DATA6_CONN_EMMC0_DATA6	0x00000020
+			IMX8QM_EMMC0_DATA7_CONN_EMMC0_DATA7	0x00000020
+			IMX8QM_EMMC0_STROBE_CONN_EMMC0_STROBE	0x00000040
+			IMX8QM_EMMC0_RESET_B_CONN_EMMC0_RESET_B	0x00000020
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2grpgpio {
+		fsl,pins = <
+			IMX8QM_USDHC1_DATA6_LSIO_GPIO5_IO21	0x00000021
+			IMX8QM_USDHC1_DATA7_LSIO_GPIO5_IO22	0x00000021
+			IMX8QM_USDHC1_RESET_B_LSIO_GPIO4_IO07	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK	0x06000041
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD	0x00000021
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000021
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000021
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000021
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000021
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000021
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK	0x06000040
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD	0x00000020
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
+		fsl,pins = <
+			IMX8QM_USDHC1_CLK_CONN_USDHC1_CLK	0x06000040
+			IMX8QM_USDHC1_CMD_CONN_USDHC1_CMD	0x00000020
+			IMX8QM_USDHC1_DATA0_CONN_USDHC1_DATA0	0x00000020
+			IMX8QM_USDHC1_DATA1_CONN_USDHC1_DATA1	0x00000020
+			IMX8QM_USDHC1_DATA2_CONN_USDHC1_DATA2	0x00000020
+			IMX8QM_USDHC1_DATA3_CONN_USDHC1_DATA3	0x00000020
+			IMX8QM_USDHC1_VSELECT_CONN_USDHC1_VSELECT	0x00000020
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK         0x06000041
+			IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD         0x00000021
+			IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0     0x00000021
+			IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1     0x00000021
+			IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2     0x00000021
+			IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3     0x00000021
+			IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000021
+		>;
+	};
+
+	pinctrl_usdhc3_gpio: usdhc3grpgpio {
+		fsl,pins = <
+			IMX8QM_USDHC2_WP_LSIO_GPIO4_IO11  0x00000021
+			IMX8QM_USDHC2_CD_B_LSIO_GPIO4_IO12        0x00000021
+			IMX8QM_USDHC2_RESET_B_LSIO_GPIO4_IO09     0x00000021
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
+		fsl,pins = <
+			IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK         0x06000040
+			IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD         0x00000020
+			IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0     0x00000020
+			IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1     0x00000020
+			IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2     0x00000020
+			IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3     0x00000020
+			IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000020
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
+		fsl,pins = <
+			IMX8QM_USDHC2_CLK_CONN_USDHC2_CLK         0x06000040
+			IMX8QM_USDHC2_CMD_CONN_USDHC2_CMD         0x00000020
+			IMX8QM_USDHC2_DATA0_CONN_USDHC2_DATA0     0x00000020
+			IMX8QM_USDHC2_DATA1_CONN_USDHC2_DATA1     0x00000020
+			IMX8QM_USDHC2_DATA2_CONN_USDHC2_DATA2     0x00000020
+			IMX8QM_USDHC2_DATA3_CONN_USDHC2_DATA3     0x00000020
+			IMX8QM_USDHC2_VSELECT_CONN_USDHC2_VSELECT 0x00000020
+		>;
+	};
+};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 3+ messages in thread
* Re: [PATCHv4 1/1] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board
  2019-10-25  7:37 ` [PATCHv4 1/1] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board Oliver Graute
@ 2019-10-28  2:01   ` kbuild test robot
  0 siblings, 0 replies; 3+ messages in thread
From: kbuild test robot @ 2019-10-28  2:01 UTC (permalink / raw)
  To: Oliver Graute
  Cc: aisheng.dong@nxp•com, Mark Rutland, kbuild-all, Pramod Kumar,
	Anson Huang, devicetree@vger•kernel.org, Fabio Estevam,
	Oliver Graute, linux-kernel@vger•kernel.org, Li Yang, Richard Hu,
	oliver.graute@gmail•com, Rob Herring, Bhaskar Upadhaya,
	NXP Linux Team, Pengutronix Kernel Team, Manivannan Sadhasivam,
	shawnguo@kernel•org, Sascha Hauer,
	linux-arm-kernel@lists•infradead.org, Lucas Stach

[-- Attachment #1: Type: text/plain, Size: 1555 bytes --]

Hi Oliver,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on robh/for-next]
[also build test ERROR on v5.4-rc5 next-20191025]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Oliver-Graute/arm64-dts-add-basic-DTS-for-imx8qm-rom7720-board/20191028-060303
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
config: arm64-defconfig (attached as .config)
compiler: aarch64-linux-gcc (GCC) 7.4.0
reproduce:
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # save the attached .config to linux build tree
        GCC_VERSION=7.4.0 make.cross ARCH=arm64 

If you fix the issue, kindly add following tag
Reported-by: kbuild test robot <lkp@intel•com>

All errors (new ones prefixed by >>):

>> arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts:8:10: fatal error: imx8qm.dtsi: No such file or directory
       8 | #include "imx8qm.dtsi"
         |          ^~~~~~~~~~~~~
   compilation terminated.

vim +8 arch/arm64/boot/dts/freescale/imx8qm-rom7720-a1.dts

     7	
   > 8	#include "imx8qm.dtsi"
     9	

---
0-DAY kernel test infrastructure                Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all                   Intel Corporation

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 45820 bytes --]

[-- Attachment #3: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-10-28  2:02 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-10-25  7:37 [PATCHv4 0/1] arm64: dts: add basic DTS for imx8qm-rom7720 board Oliver Graute
2019-10-25  7:37 ` [PATCHv4 1/1] arm64: dts: add basic DTS for imx8qm-rom7720-a1 board Oliver Graute
2019-10-28  2:01   ` kbuild test robot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox