* [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 @ 2019-10-12 20:05 Alistair Francis 2019-10-16 14:49 ` Maxime Ripard 0 siblings, 1 reply; 8+ messages in thread From: Alistair Francis @ 2019-10-12 20:05 UTC (permalink / raw) To: linux-kernel, linux-arm-kernel Cc: alistair23, wens, Alistair Francis, mripard Follow what the sun50i-a64-pine64.dts does and expose all 5 serial connections. Signed-off-by: Alistair Francis <alistair@alistair23•me> --- .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts index 124b0b030b28..49c37b21ab36 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts @@ -56,6 +56,10 @@ aliases { ethernet0 = &emac; serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; }; chosen { @@ -280,6 +284,27 @@ }; }; +/* On Pi-2 connector */ +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +/* On Euler connector */ +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; + status = "disabled"; +}; + +/* On Euler connector, RTS/CTS optional */ +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; + status = "disabled"; +}; + &usb_otg { dr_mode = "host"; status = "okay"; -- 2.23.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 2019-10-12 20:05 [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 Alistair Francis @ 2019-10-16 14:49 ` Maxime Ripard 2019-10-16 14:54 ` Chen-Yu Tsai 0 siblings, 1 reply; 8+ messages in thread From: Maxime Ripard @ 2019-10-16 14:49 UTC (permalink / raw) To: Alistair Francis; +Cc: alistair23, wens, linux-kernel, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 1407 bytes --] Hi, On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote: > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial > connections. > > Signed-off-by: Alistair Francis <alistair@alistair23•me> > --- > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > index 124b0b030b28..49c37b21ab36 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > @@ -56,6 +56,10 @@ > aliases { > ethernet0 = &emac; > serial0 = &uart0; > + serial1 = &uart1; > + serial2 = &uart2; > + serial3 = &uart3; > + serial4 = &uart4; > }; > > chosen { > @@ -280,6 +284,27 @@ > }; > }; > > +/* On Pi-2 connector */ > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart2_pins>; > + status = "disabled"; > +}; > + > +/* On Euler connector */ > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart3_pins>; > + status = "disabled"; > +}; > + > +/* On Euler connector, RTS/CTS optional */ > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&uart4_pins>; > + status = "disabled"; > +}; Since these are all the default muxing, maybe we should just set that in the DTSI? Maxime [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 2019-10-16 14:49 ` Maxime Ripard @ 2019-10-16 14:54 ` Chen-Yu Tsai 2019-10-16 16:10 ` Alistair Francis 2019-10-21 11:17 ` Maxime Ripard 0 siblings, 2 replies; 8+ messages in thread From: Chen-Yu Tsai @ 2019-10-16 14:54 UTC (permalink / raw) To: Maxime Ripard Cc: alistair23, Alistair Francis, linux-kernel, linux-arm-kernel On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel•org> wrote: > > Hi, > > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote: > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial > > connections. > > > > Signed-off-by: Alistair Francis <alistair@alistair23•me> > > --- > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ > > 1 file changed, 25 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > index 124b0b030b28..49c37b21ab36 100644 > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > @@ -56,6 +56,10 @@ > > aliases { > > ethernet0 = &emac; > > serial0 = &uart0; > > + serial1 = &uart1; > > + serial2 = &uart2; > > + serial3 = &uart3; > > + serial4 = &uart4; > > }; > > > > chosen { > > @@ -280,6 +284,27 @@ > > }; > > }; > > > > +/* On Pi-2 connector */ > > +&uart2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart2_pins>; > > + status = "disabled"; > > +}; > > + > > +/* On Euler connector */ > > +&uart3 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart3_pins>; > > + status = "disabled"; > > +}; > > + > > +/* On Euler connector, RTS/CTS optional */ > > +&uart4 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart4_pins>; > > + status = "disabled"; > > +}; > > Since these are all the default muxing, maybe we should just set that > in the DTSI? Maybe not, since people may want to only use RX/TX, and leave the other two pins for GPIO? ChenYu _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 2019-10-16 14:54 ` Chen-Yu Tsai @ 2019-10-16 16:10 ` Alistair Francis 2019-10-21 11:17 ` Maxime Ripard 1 sibling, 0 replies; 8+ messages in thread From: Alistair Francis @ 2019-10-16 16:10 UTC (permalink / raw) To: Chen-Yu Tsai Cc: linux-arm-kernel, Alistair Francis, linux-kernel, Maxime Ripard On Wed, Oct 16, 2019 at 7:54 AM Chen-Yu Tsai <wens@csie•org> wrote: > > On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel•org> wrote: > > > > Hi, > > > > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote: > > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial > > > connections. > > > > > > Signed-off-by: Alistair Francis <alistair@alistair23•me> > > > --- > > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ > > > 1 file changed, 25 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > index 124b0b030b28..49c37b21ab36 100644 > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > @@ -56,6 +56,10 @@ > > > aliases { > > > ethernet0 = &emac; > > > serial0 = &uart0; > > > + serial1 = &uart1; > > > + serial2 = &uart2; > > > + serial3 = &uart3; > > > + serial4 = &uart4; > > > }; > > > > > > chosen { > > > @@ -280,6 +284,27 @@ > > > }; > > > }; > > > > > > +/* On Pi-2 connector */ > > > +&uart2 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart2_pins>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* On Euler connector */ > > > +&uart3 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart3_pins>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* On Euler connector, RTS/CTS optional */ > > > +&uart4 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart4_pins>; > > > + status = "disabled"; > > > +}; > > > > Since these are all the default muxing, maybe we should just set that > > in the DTSI? > > Maybe not, since people may want to only use RX/TX, and leave the other > two pins for GPIO? I think this makes the most sense for the default. Alistair > > ChenYu _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 2019-10-16 14:54 ` Chen-Yu Tsai 2019-10-16 16:10 ` Alistair Francis @ 2019-10-21 11:17 ` Maxime Ripard 2019-11-05 19:27 ` Alistair Francis 1 sibling, 1 reply; 8+ messages in thread From: Maxime Ripard @ 2019-10-21 11:17 UTC (permalink / raw) To: Chen-Yu Tsai; +Cc: alistair23, Alistair Francis, linux-kernel, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 2003 bytes --] Hi, On Wed, Oct 16, 2019 at 10:54:27PM +0800, Chen-Yu Tsai wrote: > On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel•org> wrote: > > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote: > > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial > > > connections. > > > > > > Signed-off-by: Alistair Francis <alistair@alistair23•me> > > > --- > > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ > > > 1 file changed, 25 insertions(+) > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > index 124b0b030b28..49c37b21ab36 100644 > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > @@ -56,6 +56,10 @@ > > > aliases { > > > ethernet0 = &emac; > > > serial0 = &uart0; > > > + serial1 = &uart1; > > > + serial2 = &uart2; > > > + serial3 = &uart3; > > > + serial4 = &uart4; > > > }; > > > > > > chosen { > > > @@ -280,6 +284,27 @@ > > > }; > > > }; > > > > > > +/* On Pi-2 connector */ > > > +&uart2 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart2_pins>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* On Euler connector */ > > > +&uart3 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart3_pins>; > > > + status = "disabled"; > > > +}; > > > + > > > +/* On Euler connector, RTS/CTS optional */ > > > +&uart4 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart4_pins>; > > > + status = "disabled"; > > > +}; > > > > Since these are all the default muxing, maybe we should just set that > > in the DTSI? > > Maybe not, since people may want to only use RX/TX, and leave the other > two pins for GPIO? Right, I'll apply that patch. Thanks! Maxime [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 2019-10-21 11:17 ` Maxime Ripard @ 2019-11-05 19:27 ` Alistair Francis 2019-11-06 11:52 ` Maxime Ripard 0 siblings, 1 reply; 8+ messages in thread From: Alistair Francis @ 2019-11-05 19:27 UTC (permalink / raw) To: Maxime Ripard Cc: Chen-Yu Tsai, Alistair Francis, linux-kernel, linux-arm-kernel On Mon, Oct 21, 2019 at 4:17 AM Maxime Ripard <mripard@kernel•org> wrote: > > Hi, > > On Wed, Oct 16, 2019 at 10:54:27PM +0800, Chen-Yu Tsai wrote: > > On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel•org> wrote: > > > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote: > > > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial > > > > connections. > > > > > > > > Signed-off-by: Alistair Francis <alistair@alistair23•me> > > > > --- > > > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ > > > > 1 file changed, 25 insertions(+) > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > index 124b0b030b28..49c37b21ab36 100644 > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > @@ -56,6 +56,10 @@ > > > > aliases { > > > > ethernet0 = &emac; > > > > serial0 = &uart0; > > > > + serial1 = &uart1; > > > > + serial2 = &uart2; > > > > + serial3 = &uart3; > > > > + serial4 = &uart4; > > > > }; > > > > > > > > chosen { > > > > @@ -280,6 +284,27 @@ > > > > }; > > > > }; > > > > > > > > +/* On Pi-2 connector */ > > > > +&uart2 { > > > > + pinctrl-names = "default"; > > > > + pinctrl-0 = <&uart2_pins>; > > > > + status = "disabled"; > > > > +}; > > > > + > > > > +/* On Euler connector */ > > > > +&uart3 { > > > > + pinctrl-names = "default"; > > > > + pinctrl-0 = <&uart3_pins>; > > > > + status = "disabled"; > > > > +}; > > > > + > > > > +/* On Euler connector, RTS/CTS optional */ > > > > +&uart4 { > > > > + pinctrl-names = "default"; > > > > + pinctrl-0 = <&uart4_pins>; > > > > + status = "disabled"; > > > > +}; > > > > > > Since these are all the default muxing, maybe we should just set that > > > in the DTSI? > > > > Maybe not, since people may want to only use RX/TX, and leave the other > > two pins for GPIO? > > Right, I'll apply that patch. Ping, just want to make sure this has been applied/will be applied. Alistair > > Thanks! > Maxime _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 2019-11-05 19:27 ` Alistair Francis @ 2019-11-06 11:52 ` Maxime Ripard 2019-11-06 21:45 ` Alistair Francis 0 siblings, 1 reply; 8+ messages in thread From: Maxime Ripard @ 2019-11-06 11:52 UTC (permalink / raw) To: Alistair Francis Cc: Chen-Yu Tsai, Alistair Francis, linux-kernel, linux-arm-kernel [-- Attachment #1.1: Type: text/plain, Size: 2521 bytes --] On Tue, Nov 05, 2019 at 11:27:42AM -0800, Alistair Francis wrote: > On Mon, Oct 21, 2019 at 4:17 AM Maxime Ripard <mripard@kernel•org> wrote: > > > > Hi, > > > > On Wed, Oct 16, 2019 at 10:54:27PM +0800, Chen-Yu Tsai wrote: > > > On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel•org> wrote: > > > > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote: > > > > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial > > > > > connections. > > > > > > > > > > Signed-off-by: Alistair Francis <alistair@alistair23•me> > > > > > --- > > > > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ > > > > > 1 file changed, 25 insertions(+) > > > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > > index 124b0b030b28..49c37b21ab36 100644 > > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > > @@ -56,6 +56,10 @@ > > > > > aliases { > > > > > ethernet0 = &emac; > > > > > serial0 = &uart0; > > > > > + serial1 = &uart1; > > > > > + serial2 = &uart2; > > > > > + serial3 = &uart3; > > > > > + serial4 = &uart4; > > > > > }; > > > > > > > > > > chosen { > > > > > @@ -280,6 +284,27 @@ > > > > > }; > > > > > }; > > > > > > > > > > +/* On Pi-2 connector */ > > > > > +&uart2 { > > > > > + pinctrl-names = "default"; > > > > > + pinctrl-0 = <&uart2_pins>; > > > > > + status = "disabled"; > > > > > +}; > > > > > + > > > > > +/* On Euler connector */ > > > > > +&uart3 { > > > > > + pinctrl-names = "default"; > > > > > + pinctrl-0 = <&uart3_pins>; > > > > > + status = "disabled"; > > > > > +}; > > > > > + > > > > > +/* On Euler connector, RTS/CTS optional */ > > > > > +&uart4 { > > > > > + pinctrl-names = "default"; > > > > > + pinctrl-0 = <&uart4_pins>; > > > > > + status = "disabled"; > > > > > +}; > > > > > > > > Since these are all the default muxing, maybe we should just set that > > > > in the DTSI? > > > > > > Maybe not, since people may want to only use RX/TX, and leave the other > > > two pins for GPIO? > > > > Right, I'll apply that patch. > > Ping, just want to make sure this has been applied/will be applied. This has been applied, and was part of the PR for 5.5 sent last week Maxime [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 228 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 2019-11-06 11:52 ` Maxime Ripard @ 2019-11-06 21:45 ` Alistair Francis 0 siblings, 0 replies; 8+ messages in thread From: Alistair Francis @ 2019-11-06 21:45 UTC (permalink / raw) To: Maxime Ripard Cc: Chen-Yu Tsai, Alistair Francis, linux-kernel, linux-arm-kernel On Wed, Nov 6, 2019 at 3:52 AM Maxime Ripard <mripard@kernel•org> wrote: > > On Tue, Nov 05, 2019 at 11:27:42AM -0800, Alistair Francis wrote: > > On Mon, Oct 21, 2019 at 4:17 AM Maxime Ripard <mripard@kernel•org> wrote: > > > > > > Hi, > > > > > > On Wed, Oct 16, 2019 at 10:54:27PM +0800, Chen-Yu Tsai wrote: > > > > On Wed, Oct 16, 2019 at 10:49 PM Maxime Ripard <mripard@kernel•org> wrote: > > > > > On Sat, Oct 12, 2019 at 01:05:24PM -0700, Alistair Francis wrote: > > > > > > Follow what the sun50i-a64-pine64.dts does and expose all 5 serial > > > > > > connections. > > > > > > > > > > > > Signed-off-by: Alistair Francis <alistair@alistair23•me> > > > > > > --- > > > > > > .../allwinner/sun50i-a64-sopine-baseboard.dts | 25 +++++++++++++++++++ > > > > > > 1 file changed, 25 insertions(+) > > > > > > > > > > > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > > > index 124b0b030b28..49c37b21ab36 100644 > > > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts > > > > > > @@ -56,6 +56,10 @@ > > > > > > aliases { > > > > > > ethernet0 = &emac; > > > > > > serial0 = &uart0; > > > > > > + serial1 = &uart1; > > > > > > + serial2 = &uart2; > > > > > > + serial3 = &uart3; > > > > > > + serial4 = &uart4; > > > > > > }; > > > > > > > > > > > > chosen { > > > > > > @@ -280,6 +284,27 @@ > > > > > > }; > > > > > > }; > > > > > > > > > > > > +/* On Pi-2 connector */ > > > > > > +&uart2 { > > > > > > + pinctrl-names = "default"; > > > > > > + pinctrl-0 = <&uart2_pins>; > > > > > > + status = "disabled"; > > > > > > +}; > > > > > > + > > > > > > +/* On Euler connector */ > > > > > > +&uart3 { > > > > > > + pinctrl-names = "default"; > > > > > > + pinctrl-0 = <&uart3_pins>; > > > > > > + status = "disabled"; > > > > > > +}; > > > > > > + > > > > > > +/* On Euler connector, RTS/CTS optional */ > > > > > > +&uart4 { > > > > > > + pinctrl-names = "default"; > > > > > > + pinctrl-0 = <&uart4_pins>; > > > > > > + status = "disabled"; > > > > > > +}; > > > > > > > > > > Since these are all the default muxing, maybe we should just set that > > > > > in the DTSI? > > > > > > > > Maybe not, since people may want to only use RX/TX, and leave the other > > > > two pins for GPIO? > > > > > > Right, I'll apply that patch. > > > > Ping, just want to make sure this has been applied/will be applied. > > This has been applied, and was part of the PR for 5.5 sent last week Thanks :) Alistair > > Maxime _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists•infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-11-06 21:51 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-10-12 20:05 [PATCH] arm64: dts: sun50i: sopine-baseboard: Expose serial1, serial2 and serial3 Alistair Francis 2019-10-16 14:49 ` Maxime Ripard 2019-10-16 14:54 ` Chen-Yu Tsai 2019-10-16 16:10 ` Alistair Francis 2019-10-21 11:17 ` Maxime Ripard 2019-11-05 19:27 ` Alistair Francis 2019-11-06 11:52 ` Maxime Ripard 2019-11-06 21:45 ` Alistair Francis
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox