From: Sasha Levin <sashal@kernel•org>
To: linux-kernel@vger•kernel.org, stable@vger•kernel.org
Cc: Sasha Levin <sashal@kernel•org>,
devicetree@vger•kernel.org, Jacopo Mondi <jacopo@jmondi•org>,
Jagan Teki <jagan@amarulasolutions•com>,
Michael Trimarchi <michael@amarulasolutions•com>,
Shawn Guo <shawnguo@kernel•org>,
linux-arm-kernel@lists•infradead.org
Subject: [PATCH AUTOSEL 5.4 030/107] ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL
Date: Fri, 24 Jan 2020 09:17:00 -0500 [thread overview]
Message-ID: <20200124141817.28793-30-sashal@kernel.org> (raw)
In-Reply-To: <20200124141817.28793-1-sashal@kernel.org>
From: Jagan Teki <jagan@amarulasolutions•com>
[ Upstream commit 4a132f60808ae3a751e107a373f8572012352d3c ]
The EDIMM STARTER KIT i.Core 1.5 MIPI Evaluation is based on
the 1.5 version of the i.Core MX6 cpu module. The 1.5 version
differs from the original one for a few details, including the
ethernet PHY interface clock provider.
With this commit, the ethernet interface works properly:
SMSC LAN8710/LAN8720 2188000.ethernet-1:00: attached PHY driver
While before using the 1.5 version, ethernet failed to startup
do to un-clocked PHY interface:
fec 2188000.ethernet eth0: could not attach to PHY
Similar fix has merged for i.Core MX6Q but missed to update for DL.
Fixes: a8039f2dd089 ("ARM: dts: imx6dl: Add Engicam i.CoreM6 1.5 Quad/Dual MIPI starter kit support")
Cc: Jacopo Mondi <jacopo@jmondi•org>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions•com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions•com>
Signed-off-by: Shawn Guo <shawnguo@kernel•org>
Signed-off-by: Sasha Levin <sashal@kernel•org>
---
arch/arm/boot/dts/imx6dl-icore-mipi.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6dl-icore-mipi.dts b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
index e43bccb78ab2b..d8f3821a0ffdc 100644
--- a/arch/arm/boot/dts/imx6dl-icore-mipi.dts
+++ b/arch/arm/boot/dts/imx6dl-icore-mipi.dts
@@ -8,7 +8,7 @@
/dts-v1/;
#include "imx6dl.dtsi"
-#include "imx6qdl-icore.dtsi"
+#include "imx6qdl-icore-1.5.dtsi"
/ {
model = "Engicam i.CoreM6 DualLite/Solo MIPI Starter Kit";
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-24 14:23 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200124141817.28793-1-sashal@kernel.org>
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 002/107] clk: sunxi-ng: v3s: Fix incorrect number of hw_clks Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 003/107] ARM: dts: meson8: fix the size of the PMU registers Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 004/107] dt-bindings: reset: meson8b: fix duplicate reset IDs Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 005/107] arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 006/107] ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 008/107] ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 009/107] ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 010/107] ARM: dts: beagle-x15-common: Model 5V0 regulator Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 011/107] soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 013/107] ARM: dts: imx6q-dhcom: fix rtc compatible Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 014/107] arm64: dts: ls1028a: fix endian setting for dcfg Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 015/107] arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 016/107] ARM: dts: imx7ulp: fix reg of cpu node Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 017/107] ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 018/107] arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 023/107] clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 024/107] clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order Sasha Levin
2020-01-24 14:17 ` Sasha Levin [this message]
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 031/107] ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 032/107] ARM: dts: imx6sx-sdb: " Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 033/107] ARM: dts: imx6sl-evk: " Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 034/107] ARM: dts: imx6sll-evk: " Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 035/107] ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 043/107] ASoC: stm32: sai: fix possible circular locking Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 046/107] ASoC: stm32: dfsdm: fix 16 bits record Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200124141817.28793-30-sashal@kernel.org \
--to=sashal@kernel$(echo .)org \
--cc=devicetree@vger$(echo .)kernel.org \
--cc=jacopo@jmondi$(echo .)org \
--cc=jagan@amarulasolutions$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=michael@amarulasolutions$(echo .)com \
--cc=shawnguo@kernel$(echo .)org \
--cc=stable@vger$(echo .)kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox