From: Sasha Levin <sashal@kernel•org>
To: linux-kernel@vger•kernel.org, stable@vger•kernel.org
Cc: Sasha Levin <sashal@kernel•org>,
devicetree@vger•kernel.org, Tony Lindgren <tony@atomide•com>,
Kishon Vijay Abraham I <kishon@ti•com>,
linux-omap@vger•kernel.org, linux-arm-kernel@lists•infradead.org
Subject: [PATCH AUTOSEL 5.4 009/107] ARM: dts: am57xx-beagle-x15/am57xx-idk: Remove "gpios" for endpoint dt nodes
Date: Fri, 24 Jan 2020 09:16:39 -0500 [thread overview]
Message-ID: <20200124141817.28793-9-sashal@kernel.org> (raw)
In-Reply-To: <20200124141817.28793-1-sashal@kernel.org>
From: Kishon Vijay Abraham I <kishon@ti•com>
[ Upstream commit 81cc0877840f72210e809bbedd6346d686560fc1 ]
PERST# line in the PCIE connector is driven by the host mode and not
EP mode. The gpios property here is used for driving the PERST# line.
Remove gpios property from all endpoint device tree nodes.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti•com>
Signed-off-by: Tony Lindgren <tony@atomide•com>
Signed-off-by: Sasha Levin <sashal@kernel•org>
---
arch/arm/boot/dts/am571x-idk.dts | 4 ----
arch/arm/boot/dts/am572x-idk-common.dtsi | 4 ----
arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi | 4 ----
3 files changed, 12 deletions(-)
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index 0aaacea1d887b..975a6b1d3fc80 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -170,10 +170,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mmc1 {
pinctrl-names = "default", "hs";
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index a064f13b38802..ddf123620e962 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -147,10 +147,6 @@
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
};
-&pcie1_ep {
- gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-};
-
&mailbox5 {
status = "okay";
mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index bc76f1705c0f6..9a94c96b0350e 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -547,10 +547,6 @@
gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
};
-&pcie1_ep {
- gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
-};
-
&mcasp3 {
#sound-dai-cells = <0>;
assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists•infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-01-24 14:20 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20200124141817.28793-1-sashal@kernel.org>
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 002/107] clk: sunxi-ng: v3s: Fix incorrect number of hw_clks Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 003/107] ARM: dts: meson8: fix the size of the PMU registers Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 004/107] dt-bindings: reset: meson8b: fix duplicate reset IDs Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 005/107] arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 006/107] ARM: OMAP2+: Fix ti_sysc_find_one_clockdomain to check for to_clk_hw_omap Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 008/107] ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity Sasha Levin
2020-01-24 14:16 ` Sasha Levin [this message]
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 010/107] ARM: dts: beagle-x15-common: Model 5V0 regulator Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 011/107] soc: ti: wkup_m3_ipc: Fix race condition with rproc_boot Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 013/107] ARM: dts: imx6q-dhcom: fix rtc compatible Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 014/107] arm64: dts: ls1028a: fix endian setting for dcfg Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 015/107] arm64: dts: imx8mm: Change SDMA1 ahb clock for imx8mm Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 016/107] ARM: dts: imx7ulp: fix reg of cpu node Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 017/107] ARM: dts: imx6q-dhcom: Fix SGTL5000 VDDIO regulator connection Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 018/107] arm64: dts: imx8mq-librem5-devkit: use correct interrupt for the magnetometer Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 023/107] clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock Sasha Levin
2020-01-24 14:16 ` [PATCH AUTOSEL 5.4 024/107] clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 030/107] ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 031/107] ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 032/107] ARM: dts: imx6sx-sdb: " Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 033/107] ARM: dts: imx6sl-evk: " Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 034/107] ARM: dts: imx6sll-evk: " Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 035/107] ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 043/107] ASoC: stm32: sai: fix possible circular locking Sasha Levin
2020-01-24 14:17 ` [PATCH AUTOSEL 5.4 046/107] ASoC: stm32: dfsdm: fix 16 bits record Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200124141817.28793-9-sashal@kernel.org \
--to=sashal@kernel$(echo .)org \
--cc=devicetree@vger$(echo .)kernel.org \
--cc=kishon@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
--cc=linux-kernel@vger$(echo .)kernel.org \
--cc=linux-omap@vger$(echo .)kernel.org \
--cc=stable@vger$(echo .)kernel.org \
--cc=tony@atomide$(echo .)com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox