* [GIT PULL] arm64: BST C1200 eMMC DTS + defconfig for v7.2
@ 2026-06-03 11:31 gordon.ge
0 siblings, 0 replies; only message in thread
From: gordon.ge @ 2026-06-03 11:31 UTC (permalink / raw)
To: soc; +Cc: arnd, yangzh0906, linux-arm-kernel, bst-upstream
The following changes since commit 254f49634ee16a731174d2ae34bc50bd5f45e731:
Linux 7.1-rc1 (2026-04-26 14:19:00 -0700)
are available in the Git repository at:
https://github.com/BlackSesame-SoC/linux.git tags/bst-arm64-emmc-for-v7.2
for you to fetch changes up to 6447b203406a931d5a2f017afa9a018a72c8d4d1:
Enable CONFIG_MMC_SDHCI_BST to support eMMC on Black Sesame Technologies C1200 boards. (2026-06-03 18:53:04 +0800)
----------------------------------------------------------------
arm64: BST C1200 eMMC DTS + defconfig for v7.2
Black Sesame Technologies:
Enable eMMC controller on BST C1200 CDCU1.0 board:
- Add mmc0 node in bstc1200.dtsi (DWCMSHC SDHCI controller)
- Add fixed clock definition and reserved SRAM bounce buffer
- Enable mmc0 with 8-bit bus on CDCU1.0 ADAS 4C2G board
- Enable CONFIG_MMC_SDHCI_BST=y in arm64 defconfig
The MMC driver was merged via mmc-next in v7.1-rc1.
These are the remaining DTS and defconfig pieces.
Signed-off-by: Gordon Ge <gordon.ge@bst•ai>
----------------------------------------------------------------
Gordon Ge (2):
Add eMMC controller support to the BST C1200 device tree:
Enable CONFIG_MMC_SDHCI_BST to support eMMC on Black Sesame Technologies C1200 boards.
.../arm64/boot/dts/bst/bstc1200-cdcu1.0-adas_4c2g.dts | 19 +++++++++++++++++++
arch/arm64/boot/dts/bst/bstc1200.dtsi | 18 ++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
3 files changed, 38 insertions(+)
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2026-06-03 11:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-06-03 11:31 [GIT PULL] arm64: BST C1200 eMMC DTS + defconfig for v7.2 gordon.ge
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox