From: sshtylyov@mvista•com (Sergei Shtylyov)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH v2] davinci: DA850 EVM: OHCI platform code
Date: Wed, 21 Dec 2011 16:05:30 +0400 [thread overview]
Message-ID: <4EF1CB8A.10309@mvista.com> (raw)
In-Reply-To: <DF0F476B391FA8409C78302C7BA518B6051CB9@DBDE01.ent.ti.com>
Hello.
On 21-12-2011 13:56, Nori, Sekhar wrote:
> On Wed, Dec 21, 2011 at 12:50:02, Manjunathappa, Prakash wrote:
>> From: Ajay Kumar Gupta<ajay.gupta@ti•com>
>> On this board the OHCI port's power control and over-current signals from
>> TPS2065 power switch are connected via GPIO2[4] and GPIO6[13] respectively,
>> so we can implement the DA8xx OHCI glue layer's hooks for overriding the
>> root hub port's power and over-current status bits.
>> We also have to properly set up the clocking mode in the CFGCHIP2 register,
>> so that internal 24 MHz reference clock is fed to the USB 2.0 (MUSB) PHY and
>> its output is used to clock the USB 1.1 (OHCI) PHY...
>> Signed-off-by: Ajay Kumar Gupta<ajay.gupta@ti•com>
>> Signed-off-by: Manjunathappa, Prakash<prakash.pm@ti•com>
> This is the third copy of OHCI platform setup code which is almost
> the same except for the GPIO numbers.
Well, in my counting, it's only second, DA830 EVM being the first one.
What's the third?
> Can we attempt to consolidate
> the GPIO case under drivers/usb/host/ohci-da8xx.c glue layer itself?
> Of course, here should be a provision for non-GPIO based implementation
> as well.
> Sergei, any thoughts, comments?
I designed the hub interface to be as abstract as I could, and now you're
proposing to add GPIO to it? No, I have no clear idea how to keeep it abstract
and add GPIO support at the same time. I would have been grateful to
TI if I didn't have to invent this at all and they stop saving on OHCI pins.
> Thanks,
> Sekhar
WBR, Sergei
next prev parent reply other threads:[~2011-12-21 12:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-21 7:20 [PATCH v2] davinci: DA850 EVM: OHCI platform code Manjunathappa, Prakash
2011-12-21 9:56 ` Nori, Sekhar
2011-12-21 12:05 ` Sergei Shtylyov [this message]
2011-12-21 12:24 ` Sergei Shtylyov
2011-12-22 12:27 ` Nori, Sekhar
2011-12-23 13:15 ` Manjunathappa, Prakash
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EF1CB8A.10309@mvista.com \
--to=sshtylyov@mvista$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox