* [GIT PULL 4/4] Samsung DT for v3.7
@ 2012-09-21 6:26 Kukjin Kim
2012-09-21 8:18 ` Kukjin Kim
0 siblings, 1 reply; 4+ messages in thread
From: Kukjin Kim @ 2012-09-21 6:26 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd, Olof
This is for updating Samsung DT for v3.7.
But now this makes many conflicts with pinctrl dt because of moving file
so I'm sorting them out to avoid useless conflicts.
I'll re-send this soon again.
This is jut for your information.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung•com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
The following changes since commit 5698bd757d55b1bb87edd1a9744ab09c142abfc2:
Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung
Kukjin Kim (1):
ARM: dts: use uart2 for console on smdkv310 and smdk5250
Tomasz Figa (6):
ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to
exynos4.dtsi
ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
ARM: dts: Assume status of all optional nodes as disabled for exynos4
ARM: dts: Specify address and size cells for i2c controllers for
EXYNOS4
ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
ARM: dts: Add basic dts file for Samsung Trats board
Tushar Behera (1):
ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
arch/arm/boot/dts/exynos4.dtsi | 248
+++++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210-origen.dts | 63 +-------
arch/arm/boot/dts/exynos4210-smdkv310.dts | 54 +------
arch/arm/boot/dts/exynos4210-trats.dts | 237
+++++++++++++++++++++++++++
arch/arm/boot/dts/exynos4210.dtsi | 181 +---------------------
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
arch/arm/mach-exynos/Makefile.boot | 2 +-
arch/arm/mach-exynos/mach-exynos4-dt.c | 32 +++-
8 files changed, 523 insertions(+), 296 deletions(-)
create mode 100644 arch/arm/boot/dts/exynos4.dtsi
create mode 100644 arch/arm/boot/dts/exynos4210-trats.dts
^ permalink raw reply [flat|nested] 4+ messages in thread* [GIT PULL 4/4] Samsung DT for v3.7
2012-09-21 6:26 [GIT PULL 4/4] Samsung DT for v3.7 Kukjin Kim
@ 2012-09-21 8:18 ` Kukjin Kim
2012-09-27 1:04 ` Kukjin Kim
0 siblings, 1 reply; 4+ messages in thread
From: Kukjin Kim @ 2012-09-21 8:18 UTC (permalink / raw)
To: linux-arm-kernel
On 09/21/12 15:26, Kukjin Kim wrote:
> Hi Arnd, Olof
>
> This is for updating Samsung DT for v3.7.
>
> But now this makes many conflicts with pinctrl dt because of moving file
> so I'm sorting them out to avoid useless conflicts.
>
> I'll re-send this soon again.
> This is jut for your information.
>
I created following branch which is merged on top of Samsung pinctrl and
board branches already are pulled into arm-soc.
This includes moving common exynos4 dt for supporting other exynos4xxxx
SoCs easily and adding exynos43210-trats board support and some updates.
Please pull from:
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
next/dt-samsung-new
If any problems, please kindly let me know.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung•com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
>
> The following changes since commit
> 5698bd757d55b1bb87edd1a9744ab09c142abfc2:
>
> Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
>
> are available in the git repository at:
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> next/dt-samsung
>
> Kukjin Kim (1):
> ARM: dts: use uart2 for console on smdkv310 and smdk5250
>
> Tomasz Figa (6):
> ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to exynos4.dtsi
> ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
> ARM: dts: Assume status of all optional nodes as disabled for exynos4
> ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4
> ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
> ARM: dts: Add basic dts file for Samsung Trats board
>
> Tushar Behera (1):
> ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
>
> arch/arm/boot/dts/exynos4.dtsi | 248 +++++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos4210-origen.dts | 63 +-------
> arch/arm/boot/dts/exynos4210-smdkv310.dts | 54 +------
> arch/arm/boot/dts/exynos4210-trats.dts | 237 +++++++++++++++++++++++++++
> arch/arm/boot/dts/exynos4210.dtsi | 181 +---------------------
> arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
> arch/arm/mach-exynos/Makefile.boot | 2 +-
> arch/arm/mach-exynos/mach-exynos4-dt.c | 32 +++-
> 8 files changed, 523 insertions(+), 296 deletions(-)
> create mode 100644 arch/arm/boot/dts/exynos4.dtsi
> create mode 100644 arch/arm/boot/dts/exynos4210-trats.dts
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL 4/4] Samsung DT for v3.7
2012-09-21 8:18 ` Kukjin Kim
@ 2012-09-27 1:04 ` Kukjin Kim
2012-09-29 18:36 ` Olof Johansson
0 siblings, 1 reply; 4+ messages in thread
From: Kukjin Kim @ 2012-09-27 1:04 UTC (permalink / raw)
To: linux-arm-kernel
Kukjin Kim wrote:
>
> On 09/21/12 15:26, Kukjin Kim wrote:
> > Hi Arnd, Olof
> >
> > This is for updating Samsung DT for v3.7.
> >
> > But now this makes many conflicts with pinctrl dt because of moving file
> > so I'm sorting them out to avoid useless conflicts.
> >
> > I'll re-send this soon again.
> > This is jut for your information.
> >
> I created following branch which is merged on top of Samsung pinctrl and
> board branches already are pulled into arm-soc.
>
> This includes moving common exynos4 dt for supporting other exynos4xxxx
> SoCs easily and adding exynos43210-trats board support and some updates.
>
> Please pull from:
> git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> next/dt-samsung-new
>
> If any problems, please kindly let me know.
>
Hi Arnd and Olof,
Maybe, you missed this one?
Note, this will make conflicts with Rob's change, move all dtb targets.
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <kgene.kim@samsung•com>, Senior Engineer,
SW Solution Development Team, Samsung Electronics Co., Ltd.
> >
> > The following changes since commit
> > 5698bd757d55b1bb87edd1a9744ab09c142abfc2:
> >
> > Linux 3.6-rc6 (2012-09-16 14:58:51 -0700)
> >
> > are available in the git repository at:
> > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> > next/dt-samsung
> >
> > Kukjin Kim (1):
> > ARM: dts: use uart2 for console on smdkv310 and smdk5250
> >
> > Tomasz Figa (6):
> > ARM: dts: Move parts common to EXYNOS4 from exynos4210.dtsi to
> exynos4.dtsi
> > ARM: EXYNOS: Use exynos4 prefix instead of exynos4210 on exynos4-dt
> > ARM: dts: Assume status of all optional nodes as disabled for exynos4
> > ARM: dts: Specify address and size cells for i2c controllers for EXYNOS4
> > ARM: EXYNOS: Add OF compatibility lookups for EXYNOS4 i2c adapters
> > ARM: dts: Add basic dts file for Samsung Trats board
> >
> > Tushar Behera (1):
> > ARM: dts: Enable on-board keys as wakeup source for exynos4210-origen
> >
> > arch/arm/boot/dts/exynos4.dtsi | 248 +++++++++++++++++++++++++++++
> > arch/arm/boot/dts/exynos4210-origen.dts | 63 +-------
> > arch/arm/boot/dts/exynos4210-smdkv310.dts | 54 +------
> > arch/arm/boot/dts/exynos4210-trats.dts | 237 +++++++++++++++++++++++++++
> > arch/arm/boot/dts/exynos4210.dtsi | 181 +---------------------
> > arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
> > arch/arm/mach-exynos/Makefile.boot | 2 +-
> > arch/arm/mach-exynos/mach-exynos4-dt.c | 32 +++-
> > 8 files changed, 523 insertions(+), 296 deletions(-)
> > create mode 100644 arch/arm/boot/dts/exynos4.dtsi
> > create mode 100644 arch/arm/boot/dts/exynos4210-trats.dts
^ permalink raw reply [flat|nested] 4+ messages in thread
* [GIT PULL 4/4] Samsung DT for v3.7
2012-09-27 1:04 ` Kukjin Kim
@ 2012-09-29 18:36 ` Olof Johansson
0 siblings, 0 replies; 4+ messages in thread
From: Olof Johansson @ 2012-09-29 18:36 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Sep 27, 2012 at 10:04:53AM +0900, Kukjin Kim wrote:
> Kukjin Kim wrote:
> >
> > On 09/21/12 15:26, Kukjin Kim wrote:
> > > Hi Arnd, Olof
> > >
> > > This is for updating Samsung DT for v3.7.
> > >
> > > But now this makes many conflicts with pinctrl dt because of moving file
> > > so I'm sorting them out to avoid useless conflicts.
> > >
> > > I'll re-send this soon again.
> > > This is jut for your information.
> > >
> > I created following branch which is merged on top of Samsung pinctrl and
> > board branches already are pulled into arm-soc.
> >
> > This includes moving common exynos4 dt for supporting other exynos4xxxx
> > SoCs easily and adding exynos43210-trats board support and some updates.
> >
> > Please pull from:
> > git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git
> > next/dt-samsung-new
> >
> > If any problems, please kindly let me know.
> >
> Hi Arnd and Olof,
>
> Maybe, you missed this one?
>
> Note, this will make conflicts with Rob's change, move all dtb targets.
Kukjin,
The branch contents is not the same as your repeated pull request, it had
patches added on the 26th and the original request was sent on the 21st. I've
pulled it anyway after reviewing those patches, but please be more transparent
with what you do to your branch if you update it after pull requests have been
sent.
Also, next time please do a full re-send of the pull request, I probably missed
it because it was a reply with just a new link and not the full diffstat, etc.
-Olof
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-09-29 18:36 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-09-21 6:26 [GIT PULL 4/4] Samsung DT for v3.7 Kukjin Kim
2012-09-21 8:18 ` Kukjin Kim
2012-09-27 1:04 ` Kukjin Kim
2012-09-29 18:36 ` Olof Johansson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox