From: swarren@wwwdotorg•org (Stephen Warren)
To: linux-arm-kernel@lists•infradead.org
Subject: [RFC PATCH 6/9] hwmon: (lm90) Register to the thermal framework
Date: Tue, 19 Feb 2013 16:18:06 -0700 [thread overview]
Message-ID: <5124082E.604@wwwdotorg.org> (raw)
In-Reply-To: <1361187031-3679-7-git-send-email-wni@nvidia.com>
On 02/18/2013 04:30 AM, Wei Ni wrote:
> Register the remote sensor to the thermal framework.
> It can support to show the temperature and read/write threshold.
> arch/arm/boot/dts/tegra30-cardhu.dtsi | 1 +
> drivers/hwmon/lm90.c | 182 ++++++++++++++++++++++++++++++++-
There shouldn't be any need to edit both those files in the same patch.
This patch is making multiple separate logical changes, which should be
separate patches.
> diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
> + #sensor-cells = <1>;
Again, in order to allow that, you need some documentation in
Documentation/devicetree/bindings/. Related to that, you need to Cc the
devicetree maintainers on at least the patches that add that documentation.
> diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
> @@ -1576,12 +1728,38 @@ static int lm90_probe(struct i2c_client *client,
...
> + np_args.np = dev->of_node;
> + np_args.index = 0;
As I mentioned before, that'd be better replaced by an explicit of_xlate
function.
next prev parent reply other threads:[~2013-02-19 23:18 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-02-18 11:30 [RFC PATCH 0/9] Support for tegra30 thermal Wei Ni
2013-02-18 11:30 ` [RFC PATCH 1/9] ARM: dt: t30 cardhu: add dt entry for lm90 Wei Ni
2013-02-19 3:28 ` Alex Courbot
2013-02-19 9:52 ` Wei Ni
2013-02-19 22:48 ` Stephen Warren
2013-02-18 11:30 ` [RFC PATCH 2/9] hwmon: (lm90) split set&show temp as common codes Wei Ni
2013-02-18 22:29 ` Matthew Longnecker
2013-02-19 9:48 ` Wei Ni
2013-02-19 3:31 ` [lm-sensors] " Guenter Roeck
2013-02-19 10:00 ` Wei Ni
2013-02-19 22:56 ` Stephen Warren
2013-02-20 12:31 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 3/9] hwmon: (lm90) add support to handle irq Wei Ni
2013-02-19 3:34 ` [lm-sensors] " Guenter Roeck
2013-02-19 10:43 ` Wei Ni
2013-02-19 23:00 ` Stephen Warren
2013-02-20 3:27 ` Alex Courbot
2013-02-20 10:27 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 4/9] hwmon: (lm90) use macros for the indexes of temp8 and temp11 Wei Ni
2013-02-19 5:39 ` Alex Courbot
2013-02-19 9:58 ` Wei Ni
2013-02-19 23:02 ` Stephen Warren
2013-02-20 10:29 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 5/9] Thermal: Support using dt node to get sensor Wei Ni
2013-02-19 23:12 ` Stephen Warren
2013-02-20 10:36 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 6/9] hwmon: (lm90) Register to the thermal framework Wei Ni
2013-02-19 3:42 ` [lm-sensors] " Guenter Roeck
2013-02-19 10:47 ` Wei Ni
2013-02-19 5:22 ` Alex Courbot
2013-02-19 10:58 ` Wei Ni
2013-02-19 23:18 ` Stephen Warren [this message]
2013-02-20 10:40 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 7/9] thermal: tegra30: add tegra30 thermal driver Wei Ni
2013-02-19 23:48 ` Stephen Warren
2013-02-20 12:23 ` Wei Ni
2013-02-19 23:56 ` Russell King - ARM Linux
2013-02-20 12:29 ` Wei Ni
2013-02-18 11:30 ` [RFC PATCH 8/9] ARM: dt: t30 cardhu: add dt entry for " Wei Ni
2013-02-19 3:42 ` Alex Courbot
2013-02-19 9:56 ` Wei Ni
2013-02-19 23:28 ` Stephen Warren
2013-02-20 11:53 ` Wei Ni
2013-02-20 17:18 ` Stephen Warren
2013-02-18 11:30 ` [RFC PATCH 9/9] ARM: tegra: defconfig: enable thermal framework Wei Ni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5124082E.604@wwwdotorg.org \
--to=swarren@wwwdotorg$(echo .)org \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox