From: jon-hunter@ti•com (Jon Hunter)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 3/5] gpio/omap: Add DT support to GPIO driver
Date: Tue, 26 Feb 2013 17:08:44 -0600 [thread overview]
Message-ID: <512D407C.6090006@ti.com> (raw)
In-Reply-To: <CAAwP0s0cB368R2mtbJpTZJreR-5GSRLfxC+8DJLo5nw3_OwBuA@mail.gmail.com>
On 02/26/2013 04:01 AM, Javier Martinez Canillas wrote:
[snip]
> I was wondering if the level/edge settings for gpios is working on OMAP.
>
> I'm adding DT support for an SMSC911x ethernet chip connected to the
> GPMC for an OMAP3 SoC based board.
>
> In the smsc911x driver probe function (smsc911x_drv_probe() in
> drivers/net/ethernet/smsc/smsc911x.c), a call to request_irq() with
> the flag IRQF_TRIGGER_LOW is needed because of the wiring on my board.
>
> Reading the gpio-omap.txt documentation it says that #interrupt-cells
> should be <2> and that a value of 8 is "active low level-sensitive".
>
> So I tried this:
>
> &gpmc {
> ethernet at 5,0 {
> pinctrl-names = "default";
> pinctrl-0 = <&smsc911x_pins>;
> compatible = "smsc,lan9221", "smsc,lan9115";
> reg = <5 0 0xff>; /* CS5 */
> interrupt-parent = <&gpio6>;
> interrupts = <16 8>; /* gpio line 176 */
> interrupt-names = "smsc911x irq";
> vmmc-supply = <&vddvario>;
> vmmc_aux-supply = <&vdd33a>;
> reg-io-width = <4>;
By the way, reg-io-width for omap does not look correct. The GPMC only
supports 8-bit or 16-bit devices IIRC. I believe all my omap boards use
16-bit.
Cheers
Jon
next prev parent reply other threads:[~2013-02-26 23:08 UTC|newest]
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-15 16:04 [PATCH 0/5] gpio/omap: Cleanup and adaptation to Device Tree Benoit Cousson
2012-02-15 16:04 ` [PATCH 1/5] gpio/omap: Remove bank->id information and misc cleanup Benoit Cousson
2012-02-16 5:53 ` DebBarma, Tarun Kanti
2012-02-16 9:33 ` Cousson, Benoit
2012-02-15 16:04 ` [PATCH 2/5] gpio/omap: Use devm_ API and add request_mem_region Benoit Cousson
2012-02-16 5:41 ` DebBarma, Tarun Kanti
2012-02-16 6:35 ` Grant Likely
2012-02-16 7:11 ` DebBarma, Tarun Kanti
2012-02-16 6:37 ` Shubhrajyoti
2012-02-16 8:56 ` Cousson, Benoit
2012-02-15 16:04 ` [PATCH 3/5] gpio/omap: Add DT support to GPIO driver Benoit Cousson
2012-02-22 14:23 ` Rob Herring
2012-02-22 14:31 ` Cousson, Benoit
2012-02-22 17:23 ` Rob Herring
2012-02-22 18:29 ` Stephen Warren
2012-02-24 15:30 ` Cousson, Benoit
2013-02-26 10:01 ` Javier Martinez Canillas
2013-02-26 16:33 ` Stephen Warren
2013-02-26 22:40 ` Jon Hunter
2013-02-26 22:44 ` Stephen Warren
2013-02-26 23:01 ` Jon Hunter
2013-02-26 23:06 ` Stephen Warren
2013-02-26 23:45 ` Jon Hunter
2013-02-27 0:13 ` Stephen Warren
2013-02-27 1:07 ` Jon Hunter
2013-02-27 3:57 ` Javier Martinez Canillas
2013-02-27 17:50 ` Stephen Warren
2013-02-27 20:05 ` Javier Martinez Canillas
2013-02-27 23:16 ` Jon Hunter
2013-02-28 12:17 ` Javier Martinez Canillas
2013-02-28 20:49 ` Jon Hunter
2013-03-02 20:05 ` Grant Likely
2013-03-07 23:14 ` Jon Hunter
2013-03-15 11:21 ` Javier Martinez Canillas
2013-03-22 8:10 ` Linus Walleij
2013-03-22 15:33 ` Stephen Warren
2013-03-22 22:52 ` Jon Hunter
2013-03-27 13:52 ` Linus Walleij
2013-03-27 16:09 ` Stephen Warren
2013-03-27 20:55 ` Linus Walleij
2013-03-29 17:01 ` Stephen Warren
2013-04-10 18:12 ` Linus Walleij
2013-04-10 20:29 ` Stephen Warren
2013-04-10 21:28 ` Linus Walleij
2013-04-11 20:30 ` Stephen Warren
2013-04-11 22:16 ` Linus Walleij
2013-04-11 22:47 ` Stephen Warren
2013-04-14 1:35 ` Javier Martinez Canillas
2013-04-14 20:53 ` Linus Walleij
2013-04-15 11:25 ` Javier Martinez Canillas
2013-04-15 16:58 ` Stephen Warren
2013-04-15 21:40 ` Jon Hunter
2013-04-15 21:44 ` Jon Hunter
2013-04-15 22:16 ` Stephen Warren
2013-04-15 23:04 ` Jon Hunter
2013-04-16 18:40 ` Stephen Warren
2013-04-16 19:27 ` Jon Hunter
2013-04-16 21:57 ` Jon Hunter
2013-04-16 22:11 ` Stephen Warren
2013-04-16 23:14 ` Jon Hunter
2013-04-17 0:41 ` Javier Martinez Canillas
2013-04-17 2:00 ` Jon Hunter
2013-04-17 7:55 ` Javier Martinez Canillas
2013-04-17 13:25 ` Jon Hunter
2013-04-17 13:42 ` Javier Martinez Canillas
2013-04-17 13:52 ` Jon Hunter
2013-04-17 14:21 ` Javier Martinez Canillas
2013-04-17 16:18 ` Javier Martinez Canillas
2013-04-26 7:31 ` Linus Walleij
2013-04-26 21:31 ` Jon Hunter
2013-06-11 21:25 ` Grant Likely
2013-06-12 9:43 ` Linus Walleij
2013-04-17 15:41 ` Stephen Warren
2013-04-26 7:27 ` Linus Walleij
2013-04-26 21:25 ` Jon Hunter
2013-05-03 14:35 ` Linus Walleij
2013-04-26 7:11 ` Linus Walleij
2013-04-26 6:59 ` Linus Walleij
2013-04-15 16:53 ` Stephen Warren
2013-04-15 20:00 ` Jon Hunter
2013-04-11 22:49 ` Javier Martinez Canillas
2013-04-11 22:51 ` Stephen Warren
2013-04-10 21:44 ` Arnd Bergmann
2013-02-27 3:33 ` Javier Martinez Canillas
2013-02-27 17:47 ` Stephen Warren
2013-02-27 20:00 ` Javier Martinez Canillas
2013-02-26 23:08 ` Jon Hunter [this message]
2013-02-27 3:47 ` Javier Martinez Canillas
2013-02-27 20:13 ` Jon Hunter
2013-02-27 23:41 ` Linus Walleij
2013-02-28 13:04 ` Benoit Cousson
2013-03-01 0:09 ` Linus Walleij
2013-03-01 0:42 ` Jon Hunter
2012-02-15 16:04 ` [PATCH 4/5] arm/dts: OMAP4: Add gpio nodes Benoit Cousson
2012-02-15 16:04 ` [PATCH 5/5] arm/dts: OMAP3: " Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=512D407C.6090006@ti.com \
--to=jon-hunter@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox