* [RESEND 0/2] davinci: Add device tree data for tps6507x.
@ 2013-03-07 6:26 Vishwanathrao Badarkhe, Manish
2013-03-15 10:36 ` Sekhar Nori
0 siblings, 1 reply; 2+ messages in thread
From: Vishwanathrao Badarkhe, Manish @ 2013-03-07 6:26 UTC (permalink / raw)
To: linux-arm-kernel
Add device tree data for regulator via tps6507x mfd device
in da850-evm.
Applies on top of v3.9-rc1 of linus tree.
Tested on da850-evm device.
Test procedure followed as below:
Once device boots up, issue command as:
$for reg in /sys/class/regulator/*; do echo $reg `cat $reg/name`
`cat $reg/state` `cat $reg/microvolts`; done
This command will print all available regulators with its name,
status (enabled/disabled) and voltages(in microvolts) like as below:
/sys/class/regulator/regulator.1 VDCDC1_3.3V enabled 3300000
/sys/class/regulator/regulator.2 VDCDC2_3.3V enabled 3300000
/sys/class/regulator/regulator.3 VDCDC3_1.2V enabled 1200000
/sys/class/regulator/regulator.4 LDO1_1.8V enabled 1800000
/sys/class/regulator/regulator.5 LDO2_1.2V enabled 1200000
Note: Some of patches in this series are already accepted and
residing in v3.9-rc1 kernel. These patches are as follows:
1. mfd: tps6507x: add device-tree support.
2. regulator: tps6507x: add device tree support.
3. ARM: davinci: da850: add DT node for I2C0.
Vishwanathrao Badarkhe, Manish (2):
ARM: regulator: add tps6507x device tree data
ARM: davinci: da850: add tps6507x regulator DT data
arch/arm/boot/dts/da850-evm.dts | 63 +++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/tps6507x.dtsi | 47 +++++++++++++++++++++++++++++
2 files changed, 110 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/tps6507x.dtsi
--
1.7.4.1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-03-15 10:36 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-07 6:26 [RESEND 0/2] davinci: Add device tree data for tps6507x Vishwanathrao Badarkhe, Manish
2013-03-15 10:36 ` Sekhar Nori
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox