From: eduardo.valentin@ti•com (Eduardo Valentin)
To: linux-arm-kernel@lists•infradead.org
Subject: [v2,01/14] thermal: Rename driver 'kirkwood' -> 'mvebu'
Date: Thu, 11 Apr 2013 12:21:50 -0400 [thread overview]
Message-ID: <5166E31E.9070305@ti.com> (raw)
In-Reply-To: <1363991114-4225-2-git-send-email-ezequiel.garcia@free-electrons.com>
Ezequiel,
On 22-03-2013 18:25, Ezequiel Garcia wrote:
> This driver will support several Marvell SoC, so it is convenient
> to rename it to 'mvebu' to represent accurately the hardware it
> supports.
>
> Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons•com>
>
> ---
> .../bindings/thermal/kirkwood-thermal.txt | 15 ---
> .../devicetree/bindings/thermal/mvebu-thermal.txt | 15 +++
> drivers/thermal/Kconfig | 10 +-
> drivers/thermal/Makefile | 2 +-
> drivers/thermal/kirkwood_thermal.c | 134 --------------------
> drivers/thermal/mvebu_thermal.c | 134 ++++++++++++++++++++
> 6 files changed, 155 insertions(+), 155 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
> create mode 100644 Documentation/devicetree/bindings/thermal/mvebu-thermal.txt
> delete mode 100644 drivers/thermal/kirkwood_thermal.c
> create mode 100644 drivers/thermal/mvebu_thermal.c
>
> diff --git a/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt b/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
> deleted file mode 100644
> index 8c0f5eb..0000000
> --- a/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
> +++ /dev/null
> @@ -1,15 +0,0 @@
> -* Kirkwood Thermal
> -
> -This version is for Kirkwood 88F8262 & 88F6283 SoCs. Other kirkwoods
> -don't contain a thermal sensor.
> -
> -Required properties:
> -- compatible : "marvell,kirkwood-thermal"
> -- reg : Address range of the thermal registers
> -
> -Example:
> -
> - thermal at 10078 {
> - compatible = "marvell,kirkwood-thermal";
> - reg = <0x10078 0x4>;
> - };
> diff --git a/Documentation/devicetree/bindings/thermal/mvebu-thermal.txt b/Documentation/devicetree/bindings/thermal/mvebu-thermal.txt
> new file mode 100644
> index 0000000..8c0f5eb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/mvebu-thermal.txt
> @@ -0,0 +1,15 @@
> +* Kirkwood Thermal
> +
> +This version is for Kirkwood 88F8262 & 88F6283 SoCs. Other kirkwoods
> +don't contain a thermal sensor.
> +
> +Required properties:
> +- compatible : "marvell,kirkwood-thermal"
> +- reg : Address range of the thermal registers
> +
> +Example:
> +
> + thermal at 10078 {
> + compatible = "marvell,kirkwood-thermal";
> + reg = <0x10078 0x4>;
> + };
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index a764f16..74f6b97 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -101,13 +101,13 @@ config RCAR_THERMAL
> Enable this to plug the R-Car thermal sensor driver into the Linux
> thermal framework
>
> -config KIRKWOOD_THERMAL
> - tristate "Temperature sensor on Marvell Kirkwood SoCs"
> - depends on ARCH_KIRKWOOD
> +config MVEBU_THERMAL
> + tristate "Temperature sensor on Marvell EBU SoCs"
> + depends on PLAT_ORION
> depends on OF
> help
> - Support for the Kirkwood thermal sensor driver into the Linux thermal
> - framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
> + Support for the thermal controllers available in several Marvell
> + EBU SoCs in the thermal framework.
While here, could you please be more descriptive?
WARNING: please write a paragraph that describes the config symbol fully
#90: FILE: drivers/thermal/Kconfig:104:
+config MVEBU_THERMAL
total: 0 errors, 1 warnings, 175 lines checked
v2-01-14-thermal-Rename-driver-kirkwood---mvebu.patch has style
problems, please review.
If any of these errors are false positives, please report
them to the maintainer, see CHECKPATCH in MAINTAINERS.
>
> config EXYNOS_THERMAL
> tristate "Temperature sensor on Samsung EXYNOS"
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index d3a2b38..40293a1 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -15,7 +15,7 @@ obj-$(CONFIG_CPU_THERMAL) += cpu_cooling.o
> # platform thermal drivers
> obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o
> obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o
> -obj-$(CONFIG_KIRKWOOD_THERMAL) += kirkwood_thermal.o
> +obj-$(CONFIG_MVEBU_THERMAL) += mvebu_thermal.o
> obj-$(CONFIG_EXYNOS_THERMAL) += exynos_thermal.o
> obj-$(CONFIG_DOVE_THERMAL) += dove_thermal.o
> obj-$(CONFIG_DB8500_THERMAL) += db8500_thermal.o
> diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
> deleted file mode 100644
> index 19320dd..0000000
> --- a/drivers/thermal/kirkwood_thermal.c
> +++ /dev/null
> @@ -1,134 +0,0 @@
> -/*
> - * Kirkwood thermal sensor driver
> - *
> - * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri•org>
> - *
> - * This software is licensed under the terms of the GNU General Public
> - * License version 2, as published by the Free Software Foundation, and
> - * may be copied, distributed, and modified under those terms.
> - *
> - * This program is distributed in the hope that it will be useful,
> - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> - * GNU General Public License for more details.
> - *
> - */
> -#include <linux/device.h>
> -#include <linux/err.h>
> -#include <linux/io.h>
> -#include <linux/kernel.h>
> -#include <linux/of.h>
> -#include <linux/module.h>
> -#include <linux/platform_device.h>
> -#include <linux/thermal.h>
> -
> -#define KIRKWOOD_THERMAL_VALID_OFFSET 9
> -#define KIRKWOOD_THERMAL_VALID_MASK 0x1
> -#define KIRKWOOD_THERMAL_TEMP_OFFSET 10
> -#define KIRKWOOD_THERMAL_TEMP_MASK 0x1FF
> -
> -/* Kirkwood Thermal Sensor Dev Structure */
> -struct kirkwood_thermal_priv {
> - void __iomem *sensor;
> -};
> -
> -static int kirkwood_get_temp(struct thermal_zone_device *thermal,
> - unsigned long *temp)
> -{
> - unsigned long reg;
> - struct kirkwood_thermal_priv *priv = thermal->devdata;
> -
> - reg = readl_relaxed(priv->sensor);
> -
> - /* Valid check */
> - if (!((reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
> - KIRKWOOD_THERMAL_VALID_MASK)) {
> - dev_err(&thermal->device,
> - "Temperature sensor reading not valid\n");
> - return -EIO;
> - }
> -
> - /*
> - * Calculate temperature. According to Marvell internal
> - * documentation the formula for this is:
> - * Celsius = (322-reg)/1.3625
> - */
> - reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) &
> - KIRKWOOD_THERMAL_TEMP_MASK;
> - *temp = ((3220000000UL - (10000000UL * reg)) / 13625);
> -
> - return 0;
> -}
> -
> -static struct thermal_zone_device_ops ops = {
> - .get_temp = kirkwood_get_temp,
> -};
> -
> -static const struct of_device_id kirkwood_thermal_id_table[] = {
> - { .compatible = "marvell,kirkwood-thermal" },
> - {}
> -};
> -
> -static int kirkwood_thermal_probe(struct platform_device *pdev)
> -{
> - struct thermal_zone_device *thermal = NULL;
> - struct kirkwood_thermal_priv *priv;
> - struct resource *res;
> -
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!res) {
> - dev_err(&pdev->dev, "Failed to get platform resource\n");
> - return -ENODEV;
> - }
> -
> - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> - if (!priv)
> - return -ENOMEM;
> -
> - priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
> - if (!priv->sensor) {
> - dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
> - return -EADDRNOTAVAIL;
> - }
> -
> - thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
> - priv, &ops, NULL, 0, 0);
> - if (IS_ERR(thermal)) {
> - dev_err(&pdev->dev,
> - "Failed to register thermal zone device\n");
> - return PTR_ERR(thermal);
> - }
> -
> - platform_set_drvdata(pdev, thermal);
> -
> - return 0;
> -}
> -
> -static int kirkwood_thermal_exit(struct platform_device *pdev)
> -{
> - struct thermal_zone_device *kirkwood_thermal =
> - platform_get_drvdata(pdev);
> -
> - thermal_zone_device_unregister(kirkwood_thermal);
> - platform_set_drvdata(pdev, NULL);
> -
> - return 0;
> -}
> -
> -MODULE_DEVICE_TABLE(of, kirkwood_thermal_id_table);
> -
> -static struct platform_driver kirkwood_thermal_driver = {
> - .probe = kirkwood_thermal_probe,
> - .remove = kirkwood_thermal_exit,
> - .driver = {
> - .name = "kirkwood_thermal",
> - .owner = THIS_MODULE,
> - .of_match_table = of_match_ptr(kirkwood_thermal_id_table),
> - },
> -};
> -
> -module_platform_driver(kirkwood_thermal_driver);
> -
> -MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu@nigauri•org>");
> -MODULE_DESCRIPTION("kirkwood thermal driver");
> -MODULE_LICENSE("GPL");
> diff --git a/drivers/thermal/mvebu_thermal.c b/drivers/thermal/mvebu_thermal.c
> new file mode 100644
> index 0000000..19320dd
> --- /dev/null
> +++ b/drivers/thermal/mvebu_thermal.c
> @@ -0,0 +1,134 @@
> +/*
> + * Kirkwood thermal sensor driver
> + *
> + * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri•org>
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +#include <linux/device.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/of.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +#define KIRKWOOD_THERMAL_VALID_OFFSET 9
> +#define KIRKWOOD_THERMAL_VALID_MASK 0x1
> +#define KIRKWOOD_THERMAL_TEMP_OFFSET 10
> +#define KIRKWOOD_THERMAL_TEMP_MASK 0x1FF
> +
> +/* Kirkwood Thermal Sensor Dev Structure */
> +struct kirkwood_thermal_priv {
> + void __iomem *sensor;
> +};
> +
> +static int kirkwood_get_temp(struct thermal_zone_device *thermal,
> + unsigned long *temp)
> +{
> + unsigned long reg;
> + struct kirkwood_thermal_priv *priv = thermal->devdata;
> +
> + reg = readl_relaxed(priv->sensor);
> +
> + /* Valid check */
> + if (!((reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
> + KIRKWOOD_THERMAL_VALID_MASK)) {
> + dev_err(&thermal->device,
> + "Temperature sensor reading not valid\n");
> + return -EIO;
> + }
> +
> + /*
> + * Calculate temperature. According to Marvell internal
> + * documentation the formula for this is:
> + * Celsius = (322-reg)/1.3625
> + */
> + reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) &
> + KIRKWOOD_THERMAL_TEMP_MASK;
> + *temp = ((3220000000UL - (10000000UL * reg)) / 13625);
> +
> + return 0;
> +}
> +
> +static struct thermal_zone_device_ops ops = {
> + .get_temp = kirkwood_get_temp,
> +};
> +
> +static const struct of_device_id kirkwood_thermal_id_table[] = {
> + { .compatible = "marvell,kirkwood-thermal" },
> + {}
> +};
> +
> +static int kirkwood_thermal_probe(struct platform_device *pdev)
> +{
> + struct thermal_zone_device *thermal = NULL;
> + struct kirkwood_thermal_priv *priv;
> + struct resource *res;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "Failed to get platform resource\n");
> + return -ENODEV;
> + }
> +
> + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> + if (!priv)
> + return -ENOMEM;
> +
> + priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
> + if (!priv->sensor) {
> + dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
> + return -EADDRNOTAVAIL;
> + }
> +
> + thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
> + priv, &ops, NULL, 0, 0);
> + if (IS_ERR(thermal)) {
> + dev_err(&pdev->dev,
> + "Failed to register thermal zone device\n");
> + return PTR_ERR(thermal);
> + }
> +
> + platform_set_drvdata(pdev, thermal);
> +
> + return 0;
> +}
> +
> +static int kirkwood_thermal_exit(struct platform_device *pdev)
> +{
> + struct thermal_zone_device *kirkwood_thermal =
> + platform_get_drvdata(pdev);
> +
> + thermal_zone_device_unregister(kirkwood_thermal);
> + platform_set_drvdata(pdev, NULL);
> +
> + return 0;
> +}
> +
> +MODULE_DEVICE_TABLE(of, kirkwood_thermal_id_table);
> +
> +static struct platform_driver kirkwood_thermal_driver = {
> + .probe = kirkwood_thermal_probe,
> + .remove = kirkwood_thermal_exit,
> + .driver = {
> + .name = "kirkwood_thermal",
> + .owner = THIS_MODULE,
> + .of_match_table = of_match_ptr(kirkwood_thermal_id_table),
> + },
> +};
> +
> +module_platform_driver(kirkwood_thermal_driver);
> +
> +MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu@nigauri•org>");
> +MODULE_DESCRIPTION("kirkwood thermal driver");
> +MODULE_LICENSE("GPL");
>
next prev parent reply other threads:[~2013-04-11 16:21 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-22 22:25 [PATCH v2 00/14] Marvell EBU thermal sensor consolidation Ezequiel Garcia
2013-03-22 22:25 ` [PATCH v2 01/14] thermal: Rename driver 'kirkwood' -> 'mvebu' Ezequiel Garcia
2013-04-11 16:00 ` [v2,01/14] " Eduardo Valentin
2013-04-11 16:31 ` Ezequiel Garcia
2013-04-11 18:47 ` Eduardo Valentin
2013-04-11 18:57 ` Eduardo Valentin
2013-04-11 19:09 ` Ezequiel Garcia
2013-04-11 16:21 ` Eduardo Valentin [this message]
2013-03-22 22:25 ` [PATCH v2 02/14] thermal: mvebu: Rename symbols " Ezequiel Garcia
2013-04-11 16:18 ` [v2,02/14] " Eduardo Valentin
2013-03-22 22:25 ` [PATCH v2 03/14] thermal: mvebu: Move MODULE_DEVICE_TABLE upwards Ezequiel Garcia
2013-04-11 16:25 ` [v2,03/14] " Eduardo Valentin
2013-03-22 22:25 ` [PATCH v2 04/14] thermal: mvebu: Remove unneeded variable initialization Ezequiel Garcia
2013-04-11 16:29 ` [v2, " Eduardo Valentin
2013-04-11 18:54 ` Eduardo Valentin
2013-03-22 22:25 ` [PATCH v2 05/14] thermal: mvebu: Convert to devm_ioremap_resource() Ezequiel Garcia
2013-04-11 16:35 ` [v2,05/14] " Eduardo Valentin
2013-04-11 18:55 ` Eduardo Valentin
2013-03-22 22:25 ` [PATCH v2 06/14] thermal: mvebu: Fix license declaration Ezequiel Garcia
2013-04-11 16:40 ` [v2,06/14] " Eduardo Valentin
2013-04-11 18:55 ` Eduardo Valentin
2013-03-22 22:25 ` [PATCH v2 07/14] thermal: mvebu: Rename kirkwood definitions to mvebu Ezequiel Garcia
2013-04-11 16:43 ` [v2,07/14] " Eduardo Valentin
2013-03-22 22:25 ` [PATCH v2 08/14] thermal: mvebu: Add infrastructure to support more multiple SoC variants Ezequiel Garcia
2013-03-22 22:25 ` [PATCH v2 09/14] thermal: mvebu: Add support for Armada XP thermal sensor Ezequiel Garcia
2013-03-22 22:25 ` [PATCH v2 10/14] thermal: mvebu: Add support for Armada 370 " Ezequiel Garcia
2013-03-22 22:25 ` [PATCH v2 11/14] thermal: mvebu: Add support for Marvell Dove SoC family Ezequiel Garcia
2013-03-23 11:26 ` Sebastian Hesselbarth
2013-03-24 0:16 ` Ezequiel Garcia
2013-03-25 9:34 ` Ezequiel Garcia
2013-03-22 22:25 ` [PATCH v2 12/14] ARM: mvebu: Add thermal support to Armada XP device tree Ezequiel Garcia
2013-03-22 22:25 ` [PATCH v2 13/14] ARM: mvebu: Add thermal support to Armada 370 " Ezequiel Garcia
2013-03-23 14:18 ` Sergei Shtylyov
2013-03-23 14:20 ` Sergei Shtylyov
2013-03-23 14:25 ` Sergei Shtylyov
2013-03-24 0:22 ` Ezequiel Garcia
2013-03-22 22:25 ` [PATCH v2 14/14] ARM: configs: Update mvebu, dove and kirkwood defconfigs for thermal Ezequiel Garcia
2013-03-23 18:16 ` [PATCH v2 00/14] Marvell EBU thermal sensor consolidation Jason Cooper
2013-03-23 18:28 ` Sebastian Hesselbarth
2013-03-23 18:31 ` Jason Cooper
2013-03-23 18:38 ` Sebastian Hesselbarth
2013-03-25 9:30 ` Andrew Lunn
2013-03-25 10:45 ` Ezequiel Garcia
2013-03-25 12:23 ` Sebastian Hesselbarth
2013-03-25 12:39 ` Ezequiel Garcia
2013-03-25 13:58 ` Sebastian Hesselbarth
2013-03-25 16:29 ` Jason Gunthorpe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5166E31E.9070305@ti.com \
--to=eduardo.valentin@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox