* [PATCH] net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
@ 2013-09-04 14:26 Thomas Petazzoni
2013-09-04 16:45 ` Gregory CLEMENT
0 siblings, 1 reply; 2+ messages in thread
From: Thomas Petazzoni @ 2013-09-04 14:26 UTC (permalink / raw)
To: linux-arm-kernel
This commit implements the ->ndo_do_ioctl() operation so that the
PHY-related ioctl() calls can work from userspace, which allows
applications like mii-tool or mii-diag to do their job.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
---
drivers/net/ethernet/marvell/mvneta.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 90ab292..389a854 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -2451,6 +2451,21 @@ static int mvneta_stop(struct net_device *dev)
return 0;
}
+static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct mvneta_port *pp = netdev_priv(dev);
+ int ret;
+
+ if (!pp->phy_dev)
+ return -ENOTSUPP;
+
+ ret = phy_mii_ioctl(pp->phy_dev, ifr, cmd);
+ if (!ret)
+ mvneta_adjust_link(dev);
+
+ return ret;
+}
+
/* Ethtool methods */
/* Get settings (phy address, speed) for ethtools */
@@ -2569,6 +2584,7 @@ static const struct net_device_ops mvneta_netdev_ops = {
.ndo_change_mtu = mvneta_change_mtu,
.ndo_tx_timeout = mvneta_tx_timeout,
.ndo_get_stats64 = mvneta_get_stats64,
+ .ndo_do_ioctl = mvneta_ioctl,
};
const struct ethtool_ops mvneta_eth_tool_ops = {
--
1.8.1.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls
2013-09-04 14:26 [PATCH] net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls Thomas Petazzoni
@ 2013-09-04 16:45 ` Gregory CLEMENT
0 siblings, 0 replies; 2+ messages in thread
From: Gregory CLEMENT @ 2013-09-04 16:45 UTC (permalink / raw)
To: linux-arm-kernel
On 04/09/2013 16:26, Thomas Petazzoni wrote:
> This commit implements the ->ndo_do_ioctl() operation so that the
> PHY-related ioctl() calls can work from userspace, which allows
> applications like mii-tool or mii-diag to do their job.
>
I tested it successfully with mii-diag for the Armada 370 on Mirabox
and for the Armada XP on Open Blocks AX3-4
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons•com>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
> ---
> drivers/net/ethernet/marvell/mvneta.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
> index 90ab292..389a854 100644
> --- a/drivers/net/ethernet/marvell/mvneta.c
> +++ b/drivers/net/ethernet/marvell/mvneta.c
> @@ -2451,6 +2451,21 @@ static int mvneta_stop(struct net_device *dev)
> return 0;
> }
>
> +static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
> +{
> + struct mvneta_port *pp = netdev_priv(dev);
> + int ret;
> +
> + if (!pp->phy_dev)
> + return -ENOTSUPP;
> +
> + ret = phy_mii_ioctl(pp->phy_dev, ifr, cmd);
> + if (!ret)
> + mvneta_adjust_link(dev);
> +
> + return ret;
> +}
> +
> /* Ethtool methods */
>
> /* Get settings (phy address, speed) for ethtools */
> @@ -2569,6 +2584,7 @@ static const struct net_device_ops mvneta_netdev_ops = {
> .ndo_change_mtu = mvneta_change_mtu,
> .ndo_tx_timeout = mvneta_tx_timeout,
> .ndo_get_stats64 = mvneta_get_stats64,
> + .ndo_do_ioctl = mvneta_ioctl,
> };
>
> const struct ethtool_ops mvneta_eth_tool_ops = {
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2013-09-04 16:45 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-09-04 14:26 [PATCH] net: mvneta: implement ->ndo_do_ioctl() to support PHY ioctls Thomas Petazzoni
2013-09-04 16:45 ` Gregory CLEMENT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox