From: george.cherian@ti•com (George Cherian)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings
Date: Wed, 27 Nov 2013 15:29:26 +0530 [thread overview]
Message-ID: <5295C27E.3010805@ti.com> (raw)
In-Reply-To: <1385410581-12148-3-git-send-email-w-kwok2@ti.com>
On 11/26/2013 1:46 AM, WingMan Kwok wrote:
> Added device tree support for TI's Keystone USB driver and updated the
> Documentation with device tree binding information.
>
> On Keystone II platforms, we use no-op phy driver.
>
> Cc: Santosh Shilimkar <santosh.shilimkar@ti•com>
> Signed-off-by: WingMan Kwok <w-kwok2@ti•com>
> ---
> .../devicetree/bindings/usb/keystone-usb.txt | 43 ++++++++++++++++++++
> arch/arm/boot/dts/keystone.dtsi | 27 ++++++++++++
> 2 files changed, 70 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/keystone-usb.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
> new file mode 100644
> index 0000000..a67de8f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt
> @@ -0,0 +1,43 @@
> +TI Keystone Soc USB Controller
> +
> +DWC3 GLUE
> +
> +Required properties:
> + - compatible: should be "ti,keystone-dwc3".
> + - #address-cells, #size-cells : should be '1' if the device has sub-nodes
> + with 'reg' property.
> + - reg : Address and length of the register set for the device. First pair
> + is the USB subsystem specific register set. Second pair is the
> + USB subsystem PHY control register set.
> + - interrupts : The irq number of this device that is used to interrupt the
> + MPU.
> + - ranges: allows valid 1:1 translation between child's address space and
> + parent's address space.
> + - clocks: Clock IDs array as required by the controller.
> + - clock-names: names of clocks correseponding to IDs in the clock property.
> +
> +Sub-nodes:
> +The dwc3 core should be added as subnode to Keystone DWC3 glue.
> +- dwc3 :
> + The binding details of dwc3 can be found in:
> + Documentation/devicetree/bindings/usb/dwc3.txt
> +
> +Example:
> + usb: usb at 2680000 {
> + compatible = "ti,keystone-dwc3";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x2680000 0x10000
> + 0x2620738 32>;
> + clocks = <&clkusb>;
> + clock-names = "usb";
> + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
> + ranges;
> +
> + dwc3 at 2690000 {
> + compatible = "synopsys,dwc3";
> + reg = <0x2690000 0x70000>;
> + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
> + usb-phy = <&usb2_phy>, <&usb3_phy>;
> + };
> + };
> diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
> index f6d6d9e..1e1049c 100644
> --- a/arch/arm/boot/dts/keystone.dtsi
> +++ b/arch/arm/boot/dts/keystone.dtsi
> @@ -181,5 +181,32 @@
> interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>;
> clocks = <&clkspi>;
> };
> +
> + usb2_phy: usb2_phy {
> + compatible = "usb-nop-xceiv";
> + };
> +
> + usb3_phy: usb3_phy {
> + compatible = "usb-nop-xceiv";
> + };
> +
> + usb: usb at 2680000 {
> + compatible = "ti,keystone-dwc3";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + reg = <0x2680000 0x10000
> + 0x2620738 32>;
> + clocks = <&clkusb>;
> + clock-names = "usb";
> + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
You don't have seperate interrrupt for wrapper and core?
Is it the same interrupt shared between XHCI,DWC3 and wrapper?
> + ranges;
> +
> + dwc3 at 2690000 {
> + compatible = "synopsys,dwc3";
> + reg = <0x2690000 0x70000>;
> + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
> + usb-phy = <&usb2_phy>, <&usb3_phy>;
> + };
> + };
> };
> };
--
-George
next prev parent reply other threads:[~2013-11-27 9:59 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-25 20:16 [PATCH 0/3] Kesytone II USB support WingMan Kwok
2013-11-25 20:16 ` [PATCH 1/3] usb: dwc3: Add Keystone specific glue layer WingMan Kwok
2013-11-25 20:39 ` Felipe Balbi
2013-11-26 0:49 ` Santosh Shilimkar
2013-11-26 17:16 ` Felipe Balbi
2013-11-26 18:21 ` Santosh Shilimkar
2013-11-27 9:19 ` George Cherian
2013-11-27 17:41 ` Felipe Balbi
2013-11-27 18:32 ` Santosh Shilimkar
2013-11-27 19:39 ` Felipe Balbi
2013-11-25 20:16 ` [PATCH 2/3] ARM: dts: keystone: Add usb devicetree bindings WingMan Kwok
2013-11-25 20:42 ` Felipe Balbi
2013-11-25 21:04 ` Santosh Shilimkar
2013-11-25 21:06 ` Felipe Balbi
2013-11-27 9:59 ` George Cherian [this message]
2013-11-27 20:24 ` Santosh Shilimkar
2013-11-25 20:16 ` [PATCH 3/3] ARM: keystone: defconfig: enable USB host mode support WingMan Kwok
2013-11-25 20:43 ` Felipe Balbi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5295C27E.3010805@ti.com \
--to=george.cherian@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox