* [PATCH 1/3] ARM: mvebu: use C preprocessor include for Armada 375/38x DTs
2014-02-20 11:11 [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs Thomas Petazzoni
@ 2014-02-20 11:11 ` Thomas Petazzoni
2014-02-20 15:12 ` Gregory CLEMENT
2014-02-20 11:11 ` [PATCH 2/3] ARM: mvebu: use GIC_{SPI,PPI} in " Thomas Petazzoni
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Thomas Petazzoni @ 2014-02-20 11:11 UTC (permalink / raw)
To: linux-arm-kernel
Some of the Armada 375/38x DTs that were recently submitted were still
using the old-style /include/ instead of the new-style, C-preprocessor
based #include. Since we are going to start including more headers,
switching to the C-preprocessor based includes is important.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
---
arch/arm/boot/dts/armada-375.dtsi | 2 +-
arch/arm/boot/dts/armada-380.dtsi | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 9f5cb51..c89fee4 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -11,7 +11,7 @@
* warranty of any kind, whether express or implied.
*/
-/include/ "skeleton.dtsi"
+#include "skeleton.dtsi"
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index 5a46ec7..82b3347 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -12,7 +12,7 @@
* warranty of any kind, whether express or implied.
*/
-/include/ "armada-38x.dtsi"
+#include "armada-38x.dtsi"
/ {
model = "Marvell Armada 380 family SoC";
--
1.8.3.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 1/3] ARM: mvebu: use C preprocessor include for Armada 375/38x DTs
2014-02-20 11:11 ` [PATCH 1/3] ARM: mvebu: use C preprocessor include " Thomas Petazzoni
@ 2014-02-20 15:12 ` Gregory CLEMENT
0 siblings, 0 replies; 8+ messages in thread
From: Gregory CLEMENT @ 2014-02-20 15:12 UTC (permalink / raw)
To: linux-arm-kernel
Hi Thomas,
On 20/02/2014 12:11, Thomas Petazzoni wrote:
> Some of the Armada 375/38x DTs that were recently submitted were still
> using the old-style /include/ instead of the new-style, C-preprocessor
> based #include. Since we are going to start including more headers,
> switching to the C-preprocessor based includes is important.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons•com>
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-375.dtsi | 2 +-
> arch/arm/boot/dts/armada-380.dtsi | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
> index 9f5cb51..c89fee4 100644
> --- a/arch/arm/boot/dts/armada-375.dtsi
> +++ b/arch/arm/boot/dts/armada-375.dtsi
> @@ -11,7 +11,7 @@
> * warranty of any kind, whether express or implied.
> */
>
> -/include/ "skeleton.dtsi"
> +#include "skeleton.dtsi"
>
> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
>
> diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
> index 5a46ec7..82b3347 100644
> --- a/arch/arm/boot/dts/armada-380.dtsi
> +++ b/arch/arm/boot/dts/armada-380.dtsi
> @@ -12,7 +12,7 @@
> * warranty of any kind, whether express or implied.
> */
>
> -/include/ "armada-38x.dtsi"
> +#include "armada-38x.dtsi"
>
> / {
> model = "Marvell Armada 380 family SoC";
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 2/3] ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs
2014-02-20 11:11 [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs Thomas Petazzoni
2014-02-20 11:11 ` [PATCH 1/3] ARM: mvebu: use C preprocessor include " Thomas Petazzoni
@ 2014-02-20 11:11 ` Thomas Petazzoni
2014-02-20 15:15 ` Gregory CLEMENT
2014-02-20 11:11 ` [PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x Thomas Petazzoni
2014-02-22 4:14 ` [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs Jason Cooper
3 siblings, 1 reply; 8+ messages in thread
From: Thomas Petazzoni @ 2014-02-20 11:11 UTC (permalink / raw)
To: linux-arm-kernel
Instead of hardcoding 0 and 1 to indicate SPI and PPI GIC interrupts,
use the definitions of <dt-bindings/interrupt-controller/arm-gic.h> to
clarify the Device Tree code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
---
arch/arm/boot/dts/armada-375.dtsi | 53 ++++++++++++++++++++-------------------
arch/arm/boot/dts/armada-380.dtsi | 6 ++---
arch/arm/boot/dts/armada-385.dtsi | 8 +++---
arch/arm/boot/dts/armada-38x.dtsi | 41 +++++++++++++++---------------
4 files changed, 55 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index c89fee4..23d497f 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -12,6 +12,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
@@ -129,7 +130,7 @@
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
- interrupts = <1 13 0x301>;
+ interrupts = <GIC_PPI 13 0x301>;
clocks = <&coreclk 2>;
};
@@ -148,7 +149,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
- interrupts = <0 1 0x4>;
+ interrupts = <GIC_SPI 1 0x4>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -159,7 +160,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- interrupts = <0 63 0x4>;
+ interrupts = <GIC_SPI 63 0x4>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -169,7 +170,7 @@
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 2 0x4>;
+ interrupts = <GIC_SPI 2 0x4>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -180,7 +181,7 @@
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 3 0x4>;
+ interrupts = <GIC_SPI 3 0x4>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -190,7 +191,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
- interrupts = <0 12 4>;
+ interrupts = <GIC_SPI 12 4>;
reg-io-width = <1>;
status = "disabled";
};
@@ -199,7 +200,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
- interrupts = <0 13 4>;
+ interrupts = <GIC_SPI 13 4>;
reg-io-width = <1>;
status = "disabled";
};
@@ -248,8 +249,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 53 0x4>, <0 54 0x4>,
- <0 55 0x4>, <0 56 0x4>;
+ interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
+ <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
};
gpio1: gpio at 18140 {
@@ -260,8 +261,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 58 0x4>, <0 59 0x4>,
- <0 60 0x4>, <0 61 0x4>;
+ interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
+ <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
};
gpio2: gpio at 18180 {
@@ -272,7 +273,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 62 0x4>;
+ interrupts = <GIC_SPI 62 0x4>;
};
system-controller at 18200 {
@@ -299,16 +300,16 @@
#size-cells = <1>;
interrupt-controller;
msi-controller;
- interrupts = <1 15 0x4>;
+ interrupts = <GIC_PPI 15 0x4>;
};
timer at 20300 {
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
- interrupts-extended = <&gic 0 8 4>,
- <&gic 0 9 4>,
- <&gic 0 10 4>,
- <&gic 0 11 4>,
+ interrupts-extended = <&gic GIC_SPI 8 4>,
+ <&gic GIC_SPI 9 4>,
+ <&gic GIC_SPI 10 4>,
+ <&gic GIC_SPI 11 4>,
<&mpic 5>,
<&mpic 6>;
clocks = <&coreclk 0>;
@@ -322,12 +323,12 @@
status = "okay";
xor00 {
- interrupts = <0 22 0x4>;
+ interrupts = <GIC_SPI 22 0x4>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
- interrupts = <0 23 0x4>;
+ interrupts = <GIC_SPI 23 0x4>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
@@ -342,12 +343,12 @@
status = "okay";
xor10 {
- interrupts = <0 65 0x4>;
+ interrupts = <GIC_SPI 65 0x4>;
dmacap,memcpy;
dmacap,xor;
};
xor11 {
- interrupts = <0 66 0x4>;
+ interrupts = <GIC_SPI 66 0x4>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
@@ -357,7 +358,7 @@
sata at a0000 {
compatible = "marvell,orion-sata";
reg = <0xa0000 0x5000>;
- interrupts = <0 26 0x4>;
+ interrupts = <GIC_SPI 26 0x4>;
clocks = <&gateclk 14>, <&gateclk 20>;
clock-names = "0", "1";
status = "disabled";
@@ -368,7 +369,7 @@
reg = <0xd0000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
- interrupts = <0 84 0x4>;
+ interrupts = <GIC_SPI 84 0x4>;
clocks = <&gateclk 11>;
status = "disabled";
};
@@ -376,7 +377,7 @@
mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
- interrupts = <0 25 0x4>;
+ interrupts = <GIC_SPI 25 0x4>;
clocks = <&gateclk 17>;
bus-width = <4>;
cap-sdio-irq;
@@ -429,7 +430,7 @@
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
@@ -446,7 +447,7 @@
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index 82b3347..678ba3d 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -70,7 +70,7 @@
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
@@ -88,7 +88,7 @@
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
@@ -106,7 +106,7 @@
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 70 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index b22f5f1..055bc2f 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -81,7 +81,7 @@
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
@@ -99,7 +99,7 @@
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
@@ -117,7 +117,7 @@
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 70 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
@@ -138,7 +138,7 @@
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic 0 71 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 71 0x4>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 7>;
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 5a10248..502d21a 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -13,6 +13,7 @@
*/
#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
@@ -109,7 +110,7 @@
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
- interrupts = <1 13 0x301>;
+ interrupts = <GIC_PPI 13 0x301>;
clocks = <&coreclk 2>;
};
@@ -128,7 +129,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
- interrupts = <0 1 0x4>;
+ interrupts = <GIC_SPI 1 0x4>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -139,7 +140,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- interrupts = <0 63 0x4>;
+ interrupts = <GIC_SPI 63 0x4>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -149,7 +150,7 @@
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 2 0x4>;
+ interrupts = <GIC_SPI 2 0x4>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -160,7 +161,7 @@
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <0 3 0x4>;
+ interrupts = <GIC_SPI 3 0x4>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -170,7 +171,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
- interrupts = <0 12 4>;
+ interrupts = <GIC_SPI 12 4>;
reg-io-width = <1>;
status = "disabled";
};
@@ -179,7 +180,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
- interrupts = <0 13 4>;
+ interrupts = <GIC_SPI 13 4>;
reg-io-width = <1>;
status = "disabled";
};
@@ -197,8 +198,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 53 0x4>, <0 54 0x4>,
- <0 55 0x4>, <0 56 0x4>;
+ interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
+ <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
};
gpio1: gpio at 18140 {
@@ -209,8 +210,8 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <0 58 0x4>, <0 59 0x4>,
- <0 60 0x4>, <0 61 0x4>;
+ interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
+ <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
};
system-controller at 18200 {
@@ -244,17 +245,17 @@
#size-cells = <1>;
interrupt-controller;
msi-controller;
- interrupts = <1 15 0x4>;
+ interrupts = <GIC_PPI 15 0x4>;
};
timer at 20300 {
compatible = "marvell,armada-380-timer",
"marvell,armada-xp-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
- interrupts-extended = <&gic 0 8 4>,
- <&gic 0 9 4>,
- <&gic 0 10 4>,
- <&gic 0 11 4>,
+ interrupts-extended = <&gic GIC_SPI 8 4>,
+ <&gic GIC_SPI 9 4>,
+ <&gic GIC_SPI 10 4>,
+ <&gic GIC_SPI 11 4>,
<&mpic 5>,
<&mpic 6>;
clocks = <&coreclk 2>, <&refclk>;
@@ -285,12 +286,12 @@
status = "okay";
xor00 {
- interrupts = <0 22 0x4>;
+ interrupts = <GIC_SPI 22 0x4>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
- interrupts = <0 23 0x4>;
+ interrupts = <GIC_SPI 23 0x4>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
@@ -305,12 +306,12 @@
status = "okay";
xor10 {
- interrupts = <0 65 0x4>;
+ interrupts = <GIC_SPI 65 0x4>;
dmacap,memcpy;
dmacap,xor;
};
xor11 {
- interrupts = <0 66 0x4>;
+ interrupts = <GIC_SPI 66 0x4>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 2/3] ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs
2014-02-20 11:11 ` [PATCH 2/3] ARM: mvebu: use GIC_{SPI,PPI} in " Thomas Petazzoni
@ 2014-02-20 15:15 ` Gregory CLEMENT
0 siblings, 0 replies; 8+ messages in thread
From: Gregory CLEMENT @ 2014-02-20 15:15 UTC (permalink / raw)
To: linux-arm-kernel
Hi Thomas,
On 20/02/2014 12:11, Thomas Petazzoni wrote:
> Instead of hardcoding 0 and 1 to indicate SPI and PPI GIC interrupts,
> use the definitions of <dt-bindings/interrupt-controller/arm-gic.h> to
> clarify the Device Tree code.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons•com>
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-375.dtsi | 53 ++++++++++++++++++++-------------------
> arch/arm/boot/dts/armada-380.dtsi | 6 ++---
> arch/arm/boot/dts/armada-385.dtsi | 8 +++---
> arch/arm/boot/dts/armada-38x.dtsi | 41 +++++++++++++++---------------
> 4 files changed, 55 insertions(+), 53 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
> index c89fee4..23d497f 100644
> --- a/arch/arm/boot/dts/armada-375.dtsi
> +++ b/arch/arm/boot/dts/armada-375.dtsi
> @@ -12,6 +12,7 @@
> */
>
> #include "skeleton.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
>
> @@ -129,7 +130,7 @@
> timer at c600 {
> compatible = "arm,cortex-a9-twd-timer";
> reg = <0xc600 0x20>;
> - interrupts = <1 13 0x301>;
> + interrupts = <GIC_PPI 13 0x301>;
> clocks = <&coreclk 2>;
> };
>
> @@ -148,7 +149,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <0>;
> - interrupts = <0 1 0x4>;
> + interrupts = <GIC_SPI 1 0x4>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -159,7 +160,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <1>;
> - interrupts = <0 63 0x4>;
> + interrupts = <GIC_SPI 63 0x4>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -169,7 +170,7 @@
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <0 2 0x4>;
> + interrupts = <GIC_SPI 2 0x4>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -180,7 +181,7 @@
> reg = <0x11100 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <0 3 0x4>;
> + interrupts = <GIC_SPI 3 0x4>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -190,7 +191,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> - interrupts = <0 12 4>;
> + interrupts = <GIC_SPI 12 4>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -199,7 +200,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> - interrupts = <0 13 4>;
> + interrupts = <GIC_SPI 13 4>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -248,8 +249,8 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <0 53 0x4>, <0 54 0x4>,
> - <0 55 0x4>, <0 56 0x4>;
> + interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
> + <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
> };
>
> gpio1: gpio at 18140 {
> @@ -260,8 +261,8 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <0 58 0x4>, <0 59 0x4>,
> - <0 60 0x4>, <0 61 0x4>;
> + interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
> + <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
> };
>
> gpio2: gpio at 18180 {
> @@ -272,7 +273,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <0 62 0x4>;
> + interrupts = <GIC_SPI 62 0x4>;
> };
>
> system-controller at 18200 {
> @@ -299,16 +300,16 @@
> #size-cells = <1>;
> interrupt-controller;
> msi-controller;
> - interrupts = <1 15 0x4>;
> + interrupts = <GIC_PPI 15 0x4>;
> };
>
> timer at 20300 {
> compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
> reg = <0x20300 0x30>, <0x21040 0x30>;
> - interrupts-extended = <&gic 0 8 4>,
> - <&gic 0 9 4>,
> - <&gic 0 10 4>,
> - <&gic 0 11 4>,
> + interrupts-extended = <&gic GIC_SPI 8 4>,
> + <&gic GIC_SPI 9 4>,
> + <&gic GIC_SPI 10 4>,
> + <&gic GIC_SPI 11 4>,
> <&mpic 5>,
> <&mpic 6>;
> clocks = <&coreclk 0>;
> @@ -322,12 +323,12 @@
> status = "okay";
>
> xor00 {
> - interrupts = <0 22 0x4>;
> + interrupts = <GIC_SPI 22 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor01 {
> - interrupts = <0 23 0x4>;
> + interrupts = <GIC_SPI 23 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -342,12 +343,12 @@
> status = "okay";
>
> xor10 {
> - interrupts = <0 65 0x4>;
> + interrupts = <GIC_SPI 65 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor11 {
> - interrupts = <0 66 0x4>;
> + interrupts = <GIC_SPI 66 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -357,7 +358,7 @@
> sata at a0000 {
> compatible = "marvell,orion-sata";
> reg = <0xa0000 0x5000>;
> - interrupts = <0 26 0x4>;
> + interrupts = <GIC_SPI 26 0x4>;
> clocks = <&gateclk 14>, <&gateclk 20>;
> clock-names = "0", "1";
> status = "disabled";
> @@ -368,7 +369,7 @@
> reg = <0xd0000 0x54>;
> #address-cells = <1>;
> #size-cells = <1>;
> - interrupts = <0 84 0x4>;
> + interrupts = <GIC_SPI 84 0x4>;
> clocks = <&gateclk 11>;
> status = "disabled";
> };
> @@ -376,7 +377,7 @@
> mvsdio at d4000 {
> compatible = "marvell,orion-sdio";
> reg = <0xd4000 0x200>;
> - interrupts = <0 25 0x4>;
> + interrupts = <GIC_SPI 25 0x4>;
> clocks = <&gateclk 17>;
> bus-width = <4>;
> cap-sdio-irq;
> @@ -429,7 +430,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -446,7 +447,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <1>;
> clocks = <&gateclk 6>;
> diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
> index 82b3347..678ba3d 100644
> --- a/arch/arm/boot/dts/armada-380.dtsi
> +++ b/arch/arm/boot/dts/armada-380.dtsi
> @@ -70,7 +70,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 8>;
> @@ -88,7 +88,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> marvell,pcie-port = <1>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -106,7 +106,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> 0x81000000 0 0 0x81000000 0x3 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 70 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
> marvell,pcie-port = <2>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 6>;
> diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
> index b22f5f1..055bc2f 100644
> --- a/arch/arm/boot/dts/armada-385.dtsi
> +++ b/arch/arm/boot/dts/armada-385.dtsi
> @@ -81,7 +81,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 8>;
> @@ -99,7 +99,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> marvell,pcie-port = <1>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -117,7 +117,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> 0x81000000 0 0 0x81000000 0x3 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 70 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
> marvell,pcie-port = <2>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 6>;
> @@ -138,7 +138,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
> 0x81000000 0 0 0x81000000 0x4 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic 0 71 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 71 0x4>;
> marvell,pcie-port = <3>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 7>;
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 5a10248..502d21a 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -13,6 +13,7 @@
> */
>
> #include "skeleton.dtsi"
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>
> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
>
> @@ -109,7 +110,7 @@
> timer at c600 {
> compatible = "arm,cortex-a9-twd-timer";
> reg = <0xc600 0x20>;
> - interrupts = <1 13 0x301>;
> + interrupts = <GIC_PPI 13 0x301>;
> clocks = <&coreclk 2>;
> };
>
> @@ -128,7 +129,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <0>;
> - interrupts = <0 1 0x4>;
> + interrupts = <GIC_SPI 1 0x4>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -139,7 +140,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <1>;
> - interrupts = <0 63 0x4>;
> + interrupts = <GIC_SPI 63 0x4>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -149,7 +150,7 @@
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <0 2 0x4>;
> + interrupts = <GIC_SPI 2 0x4>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -160,7 +161,7 @@
> reg = <0x11100 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <0 3 0x4>;
> + interrupts = <GIC_SPI 3 0x4>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -170,7 +171,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> - interrupts = <0 12 4>;
> + interrupts = <GIC_SPI 12 4>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -179,7 +180,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> - interrupts = <0 13 4>;
> + interrupts = <GIC_SPI 13 4>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -197,8 +198,8 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <0 53 0x4>, <0 54 0x4>,
> - <0 55 0x4>, <0 56 0x4>;
> + interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
> + <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
> };
>
> gpio1: gpio at 18140 {
> @@ -209,8 +210,8 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <0 58 0x4>, <0 59 0x4>,
> - <0 60 0x4>, <0 61 0x4>;
> + interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
> + <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
> };
>
> system-controller at 18200 {
> @@ -244,17 +245,17 @@
> #size-cells = <1>;
> interrupt-controller;
> msi-controller;
> - interrupts = <1 15 0x4>;
> + interrupts = <GIC_PPI 15 0x4>;
> };
>
> timer at 20300 {
> compatible = "marvell,armada-380-timer",
> "marvell,armada-xp-timer";
> reg = <0x20300 0x30>, <0x21040 0x30>;
> - interrupts-extended = <&gic 0 8 4>,
> - <&gic 0 9 4>,
> - <&gic 0 10 4>,
> - <&gic 0 11 4>,
> + interrupts-extended = <&gic GIC_SPI 8 4>,
> + <&gic GIC_SPI 9 4>,
> + <&gic GIC_SPI 10 4>,
> + <&gic GIC_SPI 11 4>,
> <&mpic 5>,
> <&mpic 6>;
> clocks = <&coreclk 2>, <&refclk>;
> @@ -285,12 +286,12 @@
> status = "okay";
>
> xor00 {
> - interrupts = <0 22 0x4>;
> + interrupts = <GIC_SPI 22 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor01 {
> - interrupts = <0 23 0x4>;
> + interrupts = <GIC_SPI 23 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -305,12 +306,12 @@
> status = "okay";
>
> xor10 {
> - interrupts = <0 65 0x4>;
> + interrupts = <GIC_SPI 65 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor11 {
> - interrupts = <0 66 0x4>;
> + interrupts = <GIC_SPI 66 0x4>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x
2014-02-20 11:11 [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs Thomas Petazzoni
2014-02-20 11:11 ` [PATCH 1/3] ARM: mvebu: use C preprocessor include " Thomas Petazzoni
2014-02-20 11:11 ` [PATCH 2/3] ARM: mvebu: use GIC_{SPI,PPI} in " Thomas Petazzoni
@ 2014-02-20 11:11 ` Thomas Petazzoni
2014-02-20 15:35 ` Gregory CLEMENT
2014-02-22 4:14 ` [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs Jason Cooper
3 siblings, 1 reply; 8+ messages in thread
From: Thomas Petazzoni @ 2014-02-20 11:11 UTC (permalink / raw)
To: linux-arm-kernel
Instead of hardcoding the values of the interrupt flags, use the
macros provided by <include/dt-bindings/interrupt-controller/irq.h>
and <include/dt-bindings/interrupt-controller/arm-gic.h> for the
Armada 375 and Armada 38x Device Tree files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
---
arch/arm/boot/dts/armada-375.dtsi | 57 +++++++++++++++++++++------------------
arch/arm/boot/dts/armada-380.dtsi | 6 ++---
arch/arm/boot/dts/armada-385.dtsi | 8 +++---
arch/arm/boot/dts/armada-38x.dtsi | 45 +++++++++++++++++--------------
4 files changed, 63 insertions(+), 53 deletions(-)
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 23d497f..3877693 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -13,6 +13,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
@@ -130,7 +131,7 @@
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
- interrupts = <GIC_PPI 13 0x301>;
+ interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
clocks = <&coreclk 2>;
};
@@ -149,7 +150,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
- interrupts = <GIC_SPI 1 0x4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -160,7 +161,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- interrupts = <GIC_SPI 63 0x4>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -170,7 +171,7 @@
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 2 0x4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -181,7 +182,7 @@
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 3 0x4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -191,7 +192,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
- interrupts = <GIC_SPI 12 4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
status = "disabled";
};
@@ -200,7 +201,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
- interrupts = <GIC_SPI 13 4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
status = "disabled";
};
@@ -249,8 +250,10 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
- <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
gpio1: gpio at 18140 {
@@ -261,8 +264,10 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
- <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
gpio2: gpio at 18180 {
@@ -273,7 +278,7 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <GIC_SPI 62 0x4>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
};
system-controller at 18200 {
@@ -300,16 +305,16 @@
#size-cells = <1>;
interrupt-controller;
msi-controller;
- interrupts = <GIC_PPI 15 0x4>;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
timer at 20300 {
compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
- interrupts-extended = <&gic GIC_SPI 8 4>,
- <&gic GIC_SPI 9 4>,
- <&gic GIC_SPI 10 4>,
- <&gic GIC_SPI 11 4>,
+ interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<&mpic 5>,
<&mpic 6>;
clocks = <&coreclk 0>;
@@ -323,12 +328,12 @@
status = "okay";
xor00 {
- interrupts = <GIC_SPI 22 0x4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
- interrupts = <GIC_SPI 23 0x4>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
@@ -343,12 +348,12 @@
status = "okay";
xor10 {
- interrupts = <GIC_SPI 65 0x4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
};
xor11 {
- interrupts = <GIC_SPI 66 0x4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
@@ -358,7 +363,7 @@
sata at a0000 {
compatible = "marvell,orion-sata";
reg = <0xa0000 0x5000>;
- interrupts = <GIC_SPI 26 0x4>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 14>, <&gateclk 20>;
clock-names = "0", "1";
status = "disabled";
@@ -369,7 +374,7 @@
reg = <0xd0000 0x54>;
#address-cells = <1>;
#size-cells = <1>;
- interrupts = <GIC_SPI 84 0x4>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 11>;
status = "disabled";
};
@@ -377,7 +382,7 @@
mvsdio at d4000 {
compatible = "marvell,orion-sdio";
reg = <0xd4000 0x200>;
- interrupts = <GIC_SPI 25 0x4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gateclk 17>;
bus-width = <4>;
cap-sdio-irq;
@@ -430,7 +435,7 @@
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
@@ -447,7 +452,7 @@
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <1>;
clocks = <&gateclk 6>;
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index 678ba3d..068031f 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -70,7 +70,7 @@
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
@@ -88,7 +88,7 @@
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
@@ -106,7 +106,7 @@
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
index 055bc2f..e2919f0 100644
--- a/arch/arm/boot/dts/armada-385.dtsi
+++ b/arch/arm/boot/dts/armada-385.dtsi
@@ -81,7 +81,7 @@
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
@@ -99,7 +99,7 @@
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
@@ -117,7 +117,7 @@
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
@@ -138,7 +138,7 @@
ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
0x81000000 0 0 0x81000000 0x4 0 1 0>;
interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 71 0x4>;
+ interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
marvell,pcie-port = <3>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 7>;
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index 502d21a..812ce28 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -14,6 +14,7 @@
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
@@ -110,7 +111,7 @@
timer@c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0xc600 0x20>;
- interrupts = <GIC_PPI 13 0x301>;
+ interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
clocks = <&coreclk 2>;
};
@@ -129,7 +130,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
- interrupts = <GIC_SPI 1 0x4>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -140,7 +141,7 @@
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
- interrupts = <GIC_SPI 63 0x4>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&coreclk 0>;
status = "disabled";
};
@@ -150,7 +151,7 @@
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 2 0x4>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -161,7 +162,7 @@
reg = <0x11100 0x20>;
#address-cells = <1>;
#size-cells = <0>;
- interrupts = <GIC_SPI 3 0x4>;
+ interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
timeout-ms = <1000>;
clocks = <&coreclk 0>;
status = "disabled";
@@ -171,7 +172,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
- interrupts = <GIC_SPI 12 4>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
status = "disabled";
};
@@ -180,7 +181,7 @@
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
- interrupts = <GIC_SPI 13 4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg-io-width = <1>;
status = "disabled";
};
@@ -198,8 +199,10 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
- <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
};
gpio1: gpio at 18140 {
@@ -210,8 +213,10 @@
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
- interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
- <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
};
system-controller at 18200 {
@@ -245,17 +250,17 @@
#size-cells = <1>;
interrupt-controller;
msi-controller;
- interrupts = <GIC_PPI 15 0x4>;
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
};
timer at 20300 {
compatible = "marvell,armada-380-timer",
"marvell,armada-xp-timer";
reg = <0x20300 0x30>, <0x21040 0x30>;
- interrupts-extended = <&gic GIC_SPI 8 4>,
- <&gic GIC_SPI 9 4>,
- <&gic GIC_SPI 10 4>,
- <&gic GIC_SPI 11 4>,
+ interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<&mpic 5>,
<&mpic 6>;
clocks = <&coreclk 2>, <&refclk>;
@@ -286,12 +291,12 @@
status = "okay";
xor00 {
- interrupts = <GIC_SPI 22 0x4>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
- interrupts = <GIC_SPI 23 0x4>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
@@ -306,12 +311,12 @@
status = "okay";
xor10 {
- interrupts = <GIC_SPI 65 0x4>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
};
xor11 {
- interrupts = <GIC_SPI 66 0x4>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
--
1.8.3.2
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x
2014-02-20 11:11 ` [PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x Thomas Petazzoni
@ 2014-02-20 15:35 ` Gregory CLEMENT
0 siblings, 0 replies; 8+ messages in thread
From: Gregory CLEMENT @ 2014-02-20 15:35 UTC (permalink / raw)
To: linux-arm-kernel
Hi Thomas,
On 20/02/2014 12:11, Thomas Petazzoni wrote:
> Instead of hardcoding the values of the interrupt flags, use the
> macros provided by <include/dt-bindings/interrupt-controller/irq.h>
> and <include/dt-bindings/interrupt-controller/arm-gic.h> for the
> Armada 375 and Armada 38x Device Tree files.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
This patch emphasizes the fact that we set the irq type by default, whereas
before using device tree, it was the exception. I know that most of the other
dtsi using GIC also set it now. So I am fine with it.But I wonder why it was
not better to use IRQ_TYPE_NONE by default (which in the code means don't set
the irq type).
Of course it is not related with the patch itself which just use the macro and
doesn't change any value, so:
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons•com>
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-375.dtsi | 57 +++++++++++++++++++++------------------
> arch/arm/boot/dts/armada-380.dtsi | 6 ++---
> arch/arm/boot/dts/armada-385.dtsi | 8 +++---
> arch/arm/boot/dts/armada-38x.dtsi | 45 +++++++++++++++++--------------
> 4 files changed, 63 insertions(+), 53 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
> index 23d497f..3877693 100644
> --- a/arch/arm/boot/dts/armada-375.dtsi
> +++ b/arch/arm/boot/dts/armada-375.dtsi
> @@ -13,6 +13,7 @@
>
> #include "skeleton.dtsi"
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
>
> @@ -130,7 +131,7 @@
> timer at c600 {
> compatible = "arm,cortex-a9-twd-timer";
> reg = <0xc600 0x20>;
> - interrupts = <GIC_PPI 13 0x301>;
> + interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
> clocks = <&coreclk 2>;
> };
>
> @@ -149,7 +150,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <0>;
> - interrupts = <GIC_SPI 1 0x4>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -160,7 +161,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <1>;
> - interrupts = <GIC_SPI 63 0x4>;
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -170,7 +171,7 @@
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 2 0x4>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -181,7 +182,7 @@
> reg = <0x11100 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 3 0x4>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -191,7 +192,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 12 4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -200,7 +201,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 13 4>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -249,8 +250,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
> - <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpio1: gpio at 18140 {
> @@ -261,8 +264,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
> - <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpio2: gpio at 18180 {
> @@ -273,7 +278,7 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 62 0x4>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> system-controller at 18200 {
> @@ -300,16 +305,16 @@
> #size-cells = <1>;
> interrupt-controller;
> msi-controller;
> - interrupts = <GIC_PPI 15 0x4>;
> + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> timer at 20300 {
> compatible = "marvell,armada-375-timer", "marvell,armada-370-timer";
> reg = <0x20300 0x30>, <0x21040 0x30>;
> - interrupts-extended = <&gic GIC_SPI 8 4>,
> - <&gic GIC_SPI 9 4>,
> - <&gic GIC_SPI 10 4>,
> - <&gic GIC_SPI 11 4>,
> + interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> <&mpic 5>,
> <&mpic 6>;
> clocks = <&coreclk 0>;
> @@ -323,12 +328,12 @@
> status = "okay";
>
> xor00 {
> - interrupts = <GIC_SPI 22 0x4>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor01 {
> - interrupts = <GIC_SPI 23 0x4>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -343,12 +348,12 @@
> status = "okay";
>
> xor10 {
> - interrupts = <GIC_SPI 65 0x4>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor11 {
> - interrupts = <GIC_SPI 66 0x4>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -358,7 +363,7 @@
> sata at a0000 {
> compatible = "marvell,orion-sata";
> reg = <0xa0000 0x5000>;
> - interrupts = <GIC_SPI 26 0x4>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gateclk 14>, <&gateclk 20>;
> clock-names = "0", "1";
> status = "disabled";
> @@ -369,7 +374,7 @@
> reg = <0xd0000 0x54>;
> #address-cells = <1>;
> #size-cells = <1>;
> - interrupts = <GIC_SPI 84 0x4>;
> + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gateclk 11>;
> status = "disabled";
> };
> @@ -377,7 +382,7 @@
> mvsdio at d4000 {
> compatible = "marvell,orion-sdio";
> reg = <0xd4000 0x200>;
> - interrupts = <GIC_SPI 25 0x4>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&gateclk 17>;
> bus-width = <4>;
> cap-sdio-irq;
> @@ -430,7 +435,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -447,7 +452,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <1>;
> clocks = <&gateclk 6>;
> diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
> index 678ba3d..068031f 100644
> --- a/arch/arm/boot/dts/armada-380.dtsi
> +++ b/arch/arm/boot/dts/armada-380.dtsi
> @@ -70,7 +70,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 8>;
> @@ -88,7 +88,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <1>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -106,7 +106,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> 0x81000000 0 0 0x81000000 0x3 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <2>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 6>;
> diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi
> index 055bc2f..e2919f0 100644
> --- a/arch/arm/boot/dts/armada-385.dtsi
> +++ b/arch/arm/boot/dts/armada-385.dtsi
> @@ -81,7 +81,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
> 0x81000000 0 0 0x81000000 0x1 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 29 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <0>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 8>;
> @@ -99,7 +99,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
> 0x81000000 0 0 0x81000000 0x2 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 33 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <1>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 5>;
> @@ -117,7 +117,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
> 0x81000000 0 0 0x81000000 0x3 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 70 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <2>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 6>;
> @@ -138,7 +138,7 @@
> ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
> 0x81000000 0 0 0x81000000 0x4 0 1 0>;
> interrupt-map-mask = <0 0 0 0>;
> - interrupt-map = <0 0 0 0 &gic GIC_SPI 71 0x4>;
> + interrupt-map = <0 0 0 0 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
> marvell,pcie-port = <3>;
> marvell,pcie-lane = <0>;
> clocks = <&gateclk 7>;
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index 502d21a..812ce28 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -14,6 +14,7 @@
>
> #include "skeleton.dtsi"
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
>
> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
>
> @@ -110,7 +111,7 @@
> timer at c600 {
> compatible = "arm,cortex-a9-twd-timer";
> reg = <0xc600 0x20>;
> - interrupts = <GIC_PPI 13 0x301>;
> + interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
> clocks = <&coreclk 2>;
> };
>
> @@ -129,7 +130,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <0>;
> - interrupts = <GIC_SPI 1 0x4>;
> + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -140,7 +141,7 @@
> #address-cells = <1>;
> #size-cells = <0>;
> cell-index = <1>;
> - interrupts = <GIC_SPI 63 0x4>;
> + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&coreclk 0>;
> status = "disabled";
> };
> @@ -150,7 +151,7 @@
> reg = <0x11000 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 2 0x4>;
> + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -161,7 +162,7 @@
> reg = <0x11100 0x20>;
> #address-cells = <1>;
> #size-cells = <0>;
> - interrupts = <GIC_SPI 3 0x4>;
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
> timeout-ms = <1000>;
> clocks = <&coreclk 0>;
> status = "disabled";
> @@ -171,7 +172,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12000 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 12 4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -180,7 +181,7 @@
> compatible = "snps,dw-apb-uart";
> reg = <0x12100 0x100>;
> reg-shift = <2>;
> - interrupts = <GIC_SPI 13 4>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> reg-io-width = <1>;
> status = "disabled";
> };
> @@ -198,8 +199,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 53 0x4>, <GIC_SPI 54 0x4>,
> - <GIC_SPI 55 0x4>, <GIC_SPI 56 0x4>;
> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> gpio1: gpio at 18140 {
> @@ -210,8 +213,10 @@
> #gpio-cells = <2>;
> interrupt-controller;
> #interrupt-cells = <2>;
> - interrupts = <GIC_SPI 58 0x4>, <GIC_SPI 59 0x4>,
> - <GIC_SPI 60 0x4>, <GIC_SPI 61 0x4>;
> + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> system-controller at 18200 {
> @@ -245,17 +250,17 @@
> #size-cells = <1>;
> interrupt-controller;
> msi-controller;
> - interrupts = <GIC_PPI 15 0x4>;
> + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
> };
>
> timer at 20300 {
> compatible = "marvell,armada-380-timer",
> "marvell,armada-xp-timer";
> reg = <0x20300 0x30>, <0x21040 0x30>;
> - interrupts-extended = <&gic GIC_SPI 8 4>,
> - <&gic GIC_SPI 9 4>,
> - <&gic GIC_SPI 10 4>,
> - <&gic GIC_SPI 11 4>,
> + interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
> + <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
> <&mpic 5>,
> <&mpic 6>;
> clocks = <&coreclk 2>, <&refclk>;
> @@ -286,12 +291,12 @@
> status = "okay";
>
> xor00 {
> - interrupts = <GIC_SPI 22 0x4>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor01 {
> - interrupts = <GIC_SPI 23 0x4>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
> @@ -306,12 +311,12 @@
> status = "okay";
>
> xor10 {
> - interrupts = <GIC_SPI 65 0x4>;
> + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> };
> xor11 {
> - interrupts = <GIC_SPI 66 0x4>;
> + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> dmacap,memcpy;
> dmacap,xor;
> dmacap,memset;
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs
2014-02-20 11:11 [PATCH 0/3] ARM: mvebu: Use preprocessor macros for Armada 375/38x DTs Thomas Petazzoni
` (2 preceding siblings ...)
2014-02-20 11:11 ` [PATCH 3/3] ARM: mvebu: use macros for interrupt flags on Armada 375/38x Thomas Petazzoni
@ 2014-02-22 4:14 ` Jason Cooper
3 siblings, 0 replies; 8+ messages in thread
From: Jason Cooper @ 2014-02-22 4:14 UTC (permalink / raw)
To: linux-arm-kernel
On Thu, Feb 20, 2014 at 12:11:28PM +0100, Thomas Petazzoni wrote:
> Jason, Greg, Andrew, Sebastian,
>
> Here are three small patches that slightly improve the recently merged
> Armada 375/38x DTs by using the existing preprocessor macros for
> interrupt specifiers.
>
> Since the mvebu/dt-3xx branch is apparently not available from the
> mvebu repository, these patches are based on mvebu/for-next. I guess
> Jason can rebase them on dt-3xx when applying, or I can resend them on
> top of dt-3xx once this branch is made available publicly.
>
> Thanks!
>
> Thomas
>
> Thomas Petazzoni (3):
> ARM: mvebu: use C preprocessor include for Armada 375/38x DTs
> ARM: mvebu: use GIC_{SPI,PPI} in Armada 375/38x DTs
> ARM: mvebu: use macros for interrupt flags on Armada 375/38x
>
> arch/arm/boot/dts/armada-375.dtsi | 60 +++++++++++++++++++++------------------
> arch/arm/boot/dts/armada-380.dtsi | 8 +++---
> arch/arm/boot/dts/armada-385.dtsi | 8 +++---
> arch/arm/boot/dts/armada-38x.dtsi | 46 +++++++++++++++++-------------
> 4 files changed, 67 insertions(+), 55 deletions(-)
Series applied to mvebu/dt-3xx with Gregory's Acks.
(and pushed this time as well ;-) )
thx,
Jason.
^ permalink raw reply [flat|nested] 8+ messages in thread