From: kishon@ti•com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 06/17] pci: host: pcie-designware: Use *base-mask* for configuring the iATU
Date: Fri, 9 May 2014 17:20:09 +0530 [thread overview]
Message-ID: <536CC0F1.301@ti.com> (raw)
In-Reply-To: <6882241.amuhzvbd8n@wuerfel>
Hi,
On Thursday 08 May 2014 02:48 PM, Arnd Bergmann wrote:
> On Thursday 08 May 2014 18:05:11 Jingoo Han wrote:
>> On Tuesday, May 06, 2014 10:59 PM, Arnd Bergmann wrote:
>>> On Tuesday 06 May 2014 19:03:52 Kishon Vijay Abraham I wrote:
>>>> In DRA7, the cpu sees 32bit address, but the pcie controller can see only 28bit
>>>> address. So whenever the cpu issues a read/write request, the 4 most
>>>> significant bits are used by L3 to determine the target controller.
>>>> For example, the cpu reserves 0x2000_0000 - 0x2FFF_FFFF for PCIe controller but
>>>> the PCIe controller will see only (0x000_0000 - 0xFFF_FFF). So for programming
>>>> the outbound translation window the *base* should be programmed as 0x000_0000.
>>>> Whenever we try to write to say 0x2000_0000, it will be translated to whatever
>>>> we have programmed in the translation window with base as 0x000_0000.
>>>>
>>>> Cc: Bjorn Helgaas <bhelgaas@google•com>
>>>> Cc: Marek Vasut <marex@denx•de>
>>>> Signed-off-by: Kishon Vijay Abraham I <kishon@ti•com>
>>>> Acked-by: Jingoo Han <jg1.han@samsung•com>
>>>> Acked-by: Mohit Kumar <mohit.kumar@st•com>
>>>
>>> Sorry, but NAK.
>>>
>>> We have a standard 'dma-ranges' property to handle this, so use it.
>>>
>>> See the x-gene PCIe driver patches for an example. Please also talk
>>> to Santosh about it, as he is implementing generic support for
>>> parsing dma-ranges in platform devices at the moment.
>>
>> Hi Arnd,
>>
>> Do you mean the following patch?
>> http://www.spinics.net/lists/kernel/msg1737725.html
>>
>
> That is the patch Santosh did for platform devices, which is related but not
> what I meant here. For the PCI inbound window setup, please have a look
> at https://lkml.org/lkml/2014/3/19/607
For some reason lkml is not showing any contents. Do you have a different link?
Thanks
Kishon
next prev parent reply other threads:[~2014-05-09 11:50 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-06 13:33 [PATCH 00/17] PCIe support for DRA7xx Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 01/17] phy: phy-omap-pipe3: Add support for PCIe PHY Kishon Vijay Abraham I
2014-05-14 12:57 ` Roger Quadros
2014-05-06 13:33 ` [PATCH 02/17] phy: omap-control: add external clock " Kishon Vijay Abraham I
2014-05-14 13:02 ` Roger Quadros
2014-05-06 13:33 ` [PATCH 03/17] phy: ti-pipe3: " Kishon Vijay Abraham I
2014-05-14 13:16 ` Roger Quadros
2014-05-14 15:19 ` Kishon Vijay Abraham I
2014-05-14 15:34 ` Nishanth Menon
2014-05-15 9:15 ` Kishon Vijay Abraham I
2014-05-15 9:25 ` Roger Quadros
2014-05-15 11:46 ` Nishanth Menon
2014-05-15 11:59 ` Kishon Vijay Abraham I
2014-05-15 12:12 ` Nishanth Menon
2014-05-15 12:18 ` Kishon Vijay Abraham I
2014-05-15 12:33 ` Nishanth Menon
2014-05-15 12:42 ` Kishon Vijay Abraham I
2014-05-27 6:11 ` Kishon Vijay Abraham I
2014-05-28 1:54 ` Mike Turquette
2014-05-28 15:52 ` Nishanth Menon
2014-05-06 13:33 ` [PATCH 04/17] phy: pipe3: insert delay to enumerate in GEN2 mode Kishon Vijay Abraham I
2014-05-14 13:20 ` Roger Quadros
2014-05-06 13:33 ` [PATCH 05/17] pci: host: pcie-dra7xx: add support for pcie-dra7xx controller Kishon Vijay Abraham I
2014-05-06 13:44 ` Marek Vasut
2014-05-07 8:21 ` Kishon Vijay Abraham I
2014-05-09 9:43 ` Pavel Machek
2014-05-06 13:54 ` Arnd Bergmann
2014-05-07 8:44 ` Kishon Vijay Abraham I
2014-05-07 9:30 ` Arnd Bergmann
2014-05-09 11:29 ` Kishon Vijay Abraham I
2014-05-06 16:35 ` Jason Gunthorpe
2014-05-07 9:22 ` Kishon Vijay Abraham I
2014-05-07 9:25 ` Arnd Bergmann
2014-05-08 8:56 ` Jingoo Han
2014-05-08 9:16 ` Arnd Bergmann
2014-05-06 13:33 ` [PATCH 06/17] pci: host: pcie-designware: Use *base-mask* for configuring the iATU Kishon Vijay Abraham I
2014-05-06 13:59 ` Arnd Bergmann
2014-05-08 9:05 ` Jingoo Han
2014-05-08 9:18 ` Arnd Bergmann
2014-05-09 11:50 ` Kishon Vijay Abraham I [this message]
2014-05-12 1:44 ` Jingoo Han
2014-05-13 12:31 ` Kishon Vijay Abraham I
2014-05-13 12:47 ` Arnd Bergmann
2014-05-13 13:26 ` Kishon Vijay Abraham I
2014-05-13 13:27 ` Arnd Bergmann
2014-05-13 13:34 ` Arnd Bergmann
2014-05-14 5:44 ` Kishon Vijay Abraham I
2014-05-14 12:45 ` Arnd Bergmann
2014-05-14 15:04 ` Kishon Vijay Abraham I
2014-05-16 9:00 ` Kishon Vijay Abraham I
2014-05-19 12:45 ` Arnd Bergmann
2014-05-06 13:33 ` [PATCH 07/17] ARM: dts: DRA7: Add divider table to optfclk_pciephy_div clock Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 08/17] ARM: dts: DRA7: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 09/17] arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 10/17] arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 11/17] ARM: dts: dra7xx-clocks: Add missing 32khz clocks used for PHY Kishon Vijay Abraham I
2014-05-14 13:23 ` Roger Quadros
2014-05-14 15:19 ` Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 12/17] ARM: dts: dra7: Add dt data for PCIe PHY control module Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 13/17] ARM: dts: dra7: Add dt data for PCIe PHY Kishon Vijay Abraham I
2014-05-06 13:34 ` [PATCH 14/17] ARM: dts: dra7: Add dt data for PCIe controller Kishon Vijay Abraham I
2014-05-06 13:34 ` [PATCH 15/17] ARM: OMAP: Enable PCI for DRA7 Kishon Vijay Abraham I
2014-05-06 13:34 ` [TEMP PATCH 16/17] pci: host: pcie-dra7xx: use reset framework APIs to reset PCIe Kishon Vijay Abraham I
2014-05-06 13:41 ` Dan Murphy
2014-05-06 13:34 ` [TEMP PATCH 17/17] ARM: dts: dra7: Add *resets* property for PCIe dt node Kishon Vijay Abraham I
2014-05-06 13:40 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=536CC0F1.301@ti.com \
--to=kishon@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox