From: santosh.shilimkar@ti•com (Santosh Shilimkar)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH] ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled
Date: Wed, 14 May 2014 15:50:00 -0400 [thread overview]
Message-ID: <5373C8E8.6040208@ti.com> (raw)
In-Reply-To: <5373C78E.7040301@linaro.org>
On Wednesday 14 May 2014 03:44 PM, Daniel Lezcano wrote:
> On 05/13/2014 04:39 PM, Santosh Shilimkar wrote:
>> On OMAP4 panda board, there have been several bug reports about boot
>> hang and lock-ups with CPU_IDLE enabled. The root cause of the issue
>> is missing interrupts while in idle state. Commit cb7094e8 {cpuidle / omap4 :
>> use CPUIDLE_FLAG_TIMER_STOP flag} moved the broadcast notifiers to common
>> code for right reasons but on OMAP4 which suffers from a nasty ROM code
>> bug with GIC, commit ff999b8a {ARM: OMAP4460: Workaround for ROM bug ..},
>> we loose interrupts which leads to issues like lock-up, hangs etc.
>>
>> Patch reverts commit cb7094 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP
>> flag} to avoid the issue. With this change, OMAP4 panda boards, the mentioned
>> issues are getting fixed. We no longer loose interrupts which was the cause
>> of the regression.
>>
>> Cc: Roger Quadros <rogerq@ti•com>
>> Cc: Kevin Hilman <khilman@linaro•org>
>> Cc: Tony Lindgren <tony@atomide•com>
>> Cc: Daniel Lezcano <daniel.lezcano@linaro•org>
>> Reported-tested-by: Roger Quadros <rogerq@ti•com>
>> Reported-tested-by: Kevin Hilman <khilman@linaro•org>
>> Tested-by: Tony Lindgren <tony@atomide•com>
>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti•com>
>> ---
>> arch/arm/mach-omap2/cpuidle44xx.c | 12 ++++++++----
>> 1 file changed, 8 insertions(+), 4 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
>> index 01fc710..3e169d9 100644
>> --- a/arch/arm/mach-omap2/cpuidle44xx.c
>> +++ b/arch/arm/mach-omap2/cpuidle44xx.c
>> @@ -14,6 +14,7 @@
>> #include <linux/cpuidle.h>
>> #include <linux/cpu_pm.h>
>> #include <linux/export.h>
>> +#include <linux/clockchips.h>
>>
>> #include <asm/cpuidle.h>
>> #include <asm/proc-fns.h>
>> @@ -83,6 +84,7 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
>> {
>> struct idle_statedata *cx = state_ptr + index;
>> u32 mpuss_can_lose_context = 0;
>> + int cpu_id = smp_processor_id();
>>
>> /*
>> * CPU0 has to wait and stay ON until CPU1 is OFF state.
>> @@ -110,6 +112,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
>> mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
>> (cx->mpu_logic_state == PWRDM_POWER_OFF);
>>
>> + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
>> +
>> /*
>> * Call idle CPU PM enter notifier chain so that
>> * VFP and per CPU interrupt context is saved.
>> @@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
>> if (dev->cpu == 0 && mpuss_can_lose_context)
>> cpu_cluster_pm_exit();
>>
>> + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
>> +
>> fail:
>> cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
>> cpu_done[dev->cpu] = false;
>> @@ -189,8 +195,7 @@ static struct cpuidle_driver omap4_idle_driver = {
>> /* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
>> .exit_latency = 328 + 440,
>> .target_residency = 960,
>> - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
>> - CPUIDLE_FLAG_TIMER_STOP,
>> + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
>> .enter = omap_enter_idle_coupled,
>> .name = "C2",
>> .desc = "CPUx OFF, MPUSS CSWR",
>> @@ -199,8 +204,7 @@ static struct cpuidle_driver omap4_idle_driver = {
>> /* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
>> .exit_latency = 460 + 518,
>> .target_residency = 1100,
>> - .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
>> - CPUIDLE_FLAG_TIMER_STOP,
>> + .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
>> .enter = omap_enter_idle_coupled,
>> .name = "C3",
>> .desc = "CPUx OFF, MPUSS OSWR",
>
> Shouldn't the broadcast timer to be setup with CLOCK_EVT_NOTIFY_BROADCAST_ON also ?
>
Which is already taken care by __cpuidle_register_driver(). Note that setup code
is still used from generic code...
next prev parent reply other threads:[~2014-05-14 19:50 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 14:39 [PATCH] ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled Santosh Shilimkar
2014-05-14 15:22 ` Tony Lindgren
2014-05-14 19:44 ` Daniel Lezcano
2014-05-14 19:50 ` Santosh Shilimkar [this message]
2014-05-14 20:02 ` Daniel Lezcano
2014-05-14 20:56 ` Tony Lindgren
2014-05-14 23:31 ` Tony Lindgren
2014-05-16 0:13 ` Tony Lindgren
2014-05-16 0:40 ` Tony Lindgren
2014-05-14 21:18 ` Santosh Shilimkar
2014-05-15 17:03 ` Santosh Shilimkar
2014-05-15 17:50 ` Daniel Lezcano
2014-05-15 17:54 ` Santosh Shilimkar
2014-05-15 18:29 ` Santosh Shilimkar
2014-05-16 0:33 ` Alex Shi
2014-05-16 13:43 ` Santosh Shilimkar
2014-05-16 21:29 ` Tony Lindgren
2014-05-19 16:45 ` Daniel Lezcano
2014-05-19 17:23 ` Tony Lindgren
2014-05-19 17:34 ` Santosh Shilimkar
2014-05-19 17:51 ` Tony Lindgren
2014-05-19 18:06 ` Daniel Lezcano
2014-05-19 19:36 ` Tony Lindgren
2014-05-19 19:45 ` Daniel Lezcano
2014-05-19 21:18 ` Tobias Jakobi
2014-05-19 22:42 ` Tony Lindgren
2014-05-23 14:44 ` Tony Lindgren
2014-05-23 18:32 ` Tony Lindgren
[not found] ` <CAKnoXLxj42veWCbRjX98iT3FNAb92J4yR+UAL716JFSOb=pcrQ@mail.gmail.com>
2014-05-27 20:34 ` Tony Lindgren
2014-05-27 21:03 ` Santosh Shilimkar
2014-05-27 21:06 ` Daniel Lezcano
2014-05-19 20:00 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5373C8E8.6040208@ti.com \
--to=santosh.shilimkar@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox