From: santosh.shilimkar@ti•com (Santosh Shilimkar)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH] ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled
Date: Thu, 15 May 2014 13:03:26 -0400 [thread overview]
Message-ID: <5374F35E.5040900@ti.com> (raw)
In-Reply-To: <5373DD94.8030208@ti.com>
Daniel,
On Wednesday 14 May 2014 05:18 PM, Santosh Shilimkar wrote:
> On Wednesday 14 May 2014 04:02 PM, Daniel Lezcano wrote:
>> On 05/14/2014 09:50 PM, Santosh Shilimkar wrote:
>>> On Wednesday 14 May 2014 03:44 PM, Daniel Lezcano wrote:
>>>> On 05/13/2014 04:39 PM, Santosh Shilimkar wrote:
>>>>> On OMAP4 panda board, there have been several bug reports about boot
>>>>> hang and lock-ups with CPU_IDLE enabled. The root cause of the issue
>>>>> is missing interrupts while in idle state. Commit cb7094e8 {cpuidle / omap4 :
>>>>> use CPUIDLE_FLAG_TIMER_STOP flag} moved the broadcast notifiers to common
>>>>> code for right reasons but on OMAP4 which suffers from a nasty ROM code
>>>>> bug with GIC, commit ff999b8a {ARM: OMAP4460: Workaround for ROM bug ..},
>>>>> we loose interrupts which leads to issues like lock-up, hangs etc.
>>>>>
>>>>> Patch reverts commit cb7094 {cpuidle / omap4 : use CPUIDLE_FLAG_TIMER_STOP
>>>>> flag} to avoid the issue. With this change, OMAP4 panda boards, the mentioned
>>>>> issues are getting fixed. We no longer loose interrupts which was the cause
>>>>> of the regression.
>>>>>
>>>>> Cc: Roger Quadros <rogerq@ti•com>
>>>>> Cc: Kevin Hilman <khilman@linaro•org>
>>>>> Cc: Tony Lindgren <tony@atomide•com>
>>>>> Cc: Daniel Lezcano <daniel.lezcano@linaro•org>
>>>>> Reported-tested-by: Roger Quadros <rogerq@ti•com>
>>>>> Reported-tested-by: Kevin Hilman <khilman@linaro•org>
>>>>> Tested-by: Tony Lindgren <tony@atomide•com>
>>>>> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti•com>
>>>>> ---
>>
>> [ ... ]
>>
>>>>>
>>>>> + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
>>>>> +
>>>>> /*
>>>>> * Call idle CPU PM enter notifier chain so that
>>>>> * VFP and per CPU interrupt context is saved.
>>>>> @@ -165,6 +169,8 @@ static int omap_enter_idle_coupled(struct cpuidle_device *dev,
>>>>> if (dev->cpu == 0 && mpuss_can_lose_context)
>>>>> cpu_cluster_pm_exit();
>>>>>
>>>>> + clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
>>
>> [ ... ]
>>
>>>>
>>>> Shouldn't the broadcast timer to be setup with CLOCK_EVT_NOTIFY_BROADCAST_ON also ?
>>>>
>>> Which is already taken care by __cpuidle_register_driver(). Note that setup code
>>> is still used from generic code...
>>
>> Nope, if the flag CPUIDLE_FLAG_TIMER_STOP is not set, the cpuidle framework won't setup the timer.
>>
> I see. I assumed it was taken care. So we might have setup the timer too.
>
>> static void __cpuidle_driver_init(struct cpuidle_driver *drv)
>> {
>>
>> ...
>>
>> for (i = drv->state_count - 1; i >= 0 ; i--) {
>> if (drv->states[i].flags & CPUIDLE_FLAG_TIMER_STOP) {
> May be you should start the bc timer in case 'CPUIDLE_FLAG_TIMER_STOP'
> or 'CPUIDLE_FLAG_COUPLED'
>> drv->bctimer = 1;
>> break;
>> }
>> }
>>
>> ...
>>
>> }
>>
>> static int __cpuidle_register_driver(struct cpuidle_driver *drv)
>> {
>> ...
>>
>> if (drv->bctimer)
>> on_each_cpu_mask(drv->cpumask,
>> cpuidle_setup_broadcast_timer,
>> (void *)CLOCK_EVT_NOTIFY_BROADCAST_ON, 1);
>>
>> ...
>> }
>>
>> So the broadcast timer does not operate with this revert. Moreover, I am not sure reverting this patch is the right solution.
>>
> With above mentioned change, it should work. Other alternatives is OMAP4 driver does
> its won registration where it can start the timer. The way it was before the
> consolidation.
>
> Ofcourse if you have better fix, then great.
>
What is your suggestion. We *must* fix the regression asap. I think
$subject patch with an update to bctimer start under CPUIDLE_FLAG_COUPLED
seems a good way forward.
Do let me know.
Regards,
Santosh
next prev parent reply other threads:[~2014-05-15 17:03 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-13 14:39 [PATCH] ARM: OMAP4: Fix the boot regression with CPU_IDLE enabled Santosh Shilimkar
2014-05-14 15:22 ` Tony Lindgren
2014-05-14 19:44 ` Daniel Lezcano
2014-05-14 19:50 ` Santosh Shilimkar
2014-05-14 20:02 ` Daniel Lezcano
2014-05-14 20:56 ` Tony Lindgren
2014-05-14 23:31 ` Tony Lindgren
2014-05-16 0:13 ` Tony Lindgren
2014-05-16 0:40 ` Tony Lindgren
2014-05-14 21:18 ` Santosh Shilimkar
2014-05-15 17:03 ` Santosh Shilimkar [this message]
2014-05-15 17:50 ` Daniel Lezcano
2014-05-15 17:54 ` Santosh Shilimkar
2014-05-15 18:29 ` Santosh Shilimkar
2014-05-16 0:33 ` Alex Shi
2014-05-16 13:43 ` Santosh Shilimkar
2014-05-16 21:29 ` Tony Lindgren
2014-05-19 16:45 ` Daniel Lezcano
2014-05-19 17:23 ` Tony Lindgren
2014-05-19 17:34 ` Santosh Shilimkar
2014-05-19 17:51 ` Tony Lindgren
2014-05-19 18:06 ` Daniel Lezcano
2014-05-19 19:36 ` Tony Lindgren
2014-05-19 19:45 ` Daniel Lezcano
2014-05-19 21:18 ` Tobias Jakobi
2014-05-19 22:42 ` Tony Lindgren
2014-05-23 14:44 ` Tony Lindgren
2014-05-23 18:32 ` Tony Lindgren
[not found] ` <CAKnoXLxj42veWCbRjX98iT3FNAb92J4yR+UAL716JFSOb=pcrQ@mail.gmail.com>
2014-05-27 20:34 ` Tony Lindgren
2014-05-27 21:03 ` Santosh Shilimkar
2014-05-27 21:06 ` Daniel Lezcano
2014-05-19 20:00 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5374F35E.5040900@ti.com \
--to=santosh.shilimkar@ti$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox