* [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support
@ 2017-03-16 5:53 Ralph Sennhauser
2017-03-23 16:29 ` Gregory CLEMENT
0 siblings, 1 reply; 2+ messages in thread
From: Ralph Sennhauser @ 2017-03-16 5:53 UTC (permalink / raw)
To: linux-arm-kernel
Add appropriate properties to devices in the Linksys WRT AC Series for the
mvneta driver to use hardware buffer management.
Also update "soc" ranges property and set the status of bm and bm-bppi
to "okay" (SRAM).
Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail•com>
---
v1 -> v2:
Use independent pools for short (suggested by Gregory Clement)
arch/arm/boot/dts/armada-385-linksys.dtsi | 17 ++++++++++++++++-
arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++-
2 files changed, 32 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
index df47bf1..aa0d225 100644
--- a/arch/arm/boot/dts/armada-385-linksys.dtsi
+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
@@ -59,7 +59,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
internal-regs {
i2c at 11000 {
@@ -88,6 +89,9 @@
ethernet at 70000 {
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -97,6 +101,9 @@
ethernet at 34000 {
status = "okay";
phy-mode = "sgmii";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -159,6 +166,10 @@
status = "okay";
};
+ bm at c8000 {
+ status = "okay";
+ };
+
/* USB part of the eSATA/USB 2.0 port */
usb at 58000 {
status = "okay";
@@ -241,6 +252,10 @@
};
};
+ bm-bppi {
+ status = "okay";
+ };
+
pcie-controller {
status = "okay";
diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
index 3744ba3..9efcf59 100644
--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
@@ -71,7 +71,8 @@
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
+ MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
+ MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
internal-regs {
@@ -95,6 +96,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <0>;
+ bm,pool-short = <1>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -106,6 +110,9 @@
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii-id";
+ buffer-manager = <&bm>;
+ bm,pool-long = <2>;
+ bm,pool-short = <3>;
fixed-link {
speed = <1000>;
full-duplex;
@@ -186,6 +193,10 @@
};
};
+ bm at c8000 {
+ status = "okay";
+ };
+
nand at d0000 {
status = "okay";
num-cs = <1>;
@@ -259,6 +270,10 @@
};
};
};
+
+ bm-bppi {
+ status = "okay";
+ };
};
gpio_keys {
--
2.10.2
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support
2017-03-16 5:53 [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support Ralph Sennhauser
@ 2017-03-23 16:29 ` Gregory CLEMENT
0 siblings, 0 replies; 2+ messages in thread
From: Gregory CLEMENT @ 2017-03-23 16:29 UTC (permalink / raw)
To: linux-arm-kernel
Hi Ralph,
On jeu., mars 16 2017, Ralph Sennhauser <ralph.sennhauser@gmail•com> wrote:
> Add appropriate properties to devices in the Linksys WRT AC Series for the
> mvneta driver to use hardware buffer management.
>
> Also update "soc" ranges property and set the status of bm and bm-bppi
> to "okay" (SRAM).
>
> Signed-off-by: Ralph Sennhauser <ralph.sennhauser@gmail•com>
Applied on mvebu/dt
Thanks,
Gregory
> ---
>
> v1 -> v2:
> Use independent pools for short (suggested by Gregory Clement)
>
>
> arch/arm/boot/dts/armada-385-linksys.dtsi | 17 ++++++++++++++++-
> arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 17 ++++++++++++++++-
> 2 files changed, 32 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi b/arch/arm/boot/dts/armada-385-linksys.dtsi
> index df47bf1..aa0d225 100644
> --- a/arch/arm/boot/dts/armada-385-linksys.dtsi
> +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
> @@ -59,7 +59,8 @@
> ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
> MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
> MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
> - MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
> + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
> + MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
>
> internal-regs {
> i2c at 11000 {
> @@ -88,6 +89,9 @@
> ethernet at 70000 {
> status = "okay";
> phy-mode = "rgmii-id";
> + buffer-manager = <&bm>;
> + bm,pool-long = <2>;
> + bm,pool-short = <3>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -97,6 +101,9 @@
> ethernet at 34000 {
> status = "okay";
> phy-mode = "sgmii";
> + buffer-manager = <&bm>;
> + bm,pool-long = <0>;
> + bm,pool-short = <1>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -159,6 +166,10 @@
> status = "okay";
> };
>
> + bm at c8000 {
> + status = "okay";
> + };
> +
> /* USB part of the eSATA/USB 2.0 port */
> usb at 58000 {
> status = "okay";
> @@ -241,6 +252,10 @@
> };
> };
>
> + bm-bppi {
> + status = "okay";
> + };
> +
> pcie-controller {
> status = "okay";
>
> diff --git a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> index 3744ba3..9efcf59 100644
> --- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> +++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
> @@ -71,7 +71,8 @@
> ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
> MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
> MBUS_ID(0x09, 0x09) 0 0 0xf1100000 0x10000
> - MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000>;
> + MBUS_ID(0x09, 0x05) 0 0 0xf1110000 0x10000
> + MBUS_ID(0x0c, 0x04) 0 0 0xf1200000 0x100000>;
>
> internal-regs {
>
> @@ -95,6 +96,9 @@
> pinctrl-names = "default";
> status = "okay";
> phy-mode = "rgmii-id";
> + buffer-manager = <&bm>;
> + bm,pool-long = <0>;
> + bm,pool-short = <1>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -106,6 +110,9 @@
> pinctrl-names = "default";
> status = "okay";
> phy-mode = "rgmii-id";
> + buffer-manager = <&bm>;
> + bm,pool-long = <2>;
> + bm,pool-short = <3>;
> fixed-link {
> speed = <1000>;
> full-duplex;
> @@ -186,6 +193,10 @@
> };
> };
>
> + bm at c8000 {
> + status = "okay";
> + };
> +
> nand at d0000 {
> status = "okay";
> num-cs = <1>;
> @@ -259,6 +270,10 @@
> };
> };
> };
> +
> + bm-bppi {
> + status = "okay";
> + };
> };
>
> gpio_keys {
> --
> 2.10.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2017-03-23 16:29 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-03-16 5:53 [PATCH v2] ARM: dts: mvebu: linksys: enable buffer manager support Ralph Sennhauser
2017-03-23 16:29 ` Gregory CLEMENT
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox