From: gregory.clement@free-electrons•com (Gregory CLEMENT)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 4/4] ARM: mvebu: use the ARMADA_370_XP_IRQ option
Date: Wed, 23 Dec 2015 12:24:43 +0100 [thread overview]
Message-ID: <87wps5e7b8.fsf@free-electrons.com> (raw)
In-Reply-To: <1450707546-15060-5-git-send-email-thomas.petazzoni@free-electrons.com> (Thomas Petazzoni's message of "Mon, 21 Dec 2015 15:19:06 +0100")
Hi Thomas,
On lun., d?c. 21 2015, Thomas Petazzoni <thomas.petazzoni@free-electrons•com> wrote:
> Now that there is a ARMADA_370_XP_IRQ option to enable the irqchip
> driver for Armada 370, XP, 375, 38x and 39x, let's select this option
> when needed. Note that this selection is currently not mandatory
> because ARMADA_370_XP_IRQ is for now always enabled when ARCH_MVEBU=y,
> but this is something that we will change in the future, and therefore
> we should make the relevant platforms select ARMADA_370_XP_IRQ when
> needed.
>
> Due to this, selecting GENERIC_IRQ_CHIP is no longer needed.
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons•com>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons•com>
Thanks,
Gregory
> ---
> arch/arm/mach-mvebu/Kconfig | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
> index e20fc41..d071080 100644
> --- a/arch/arm/mach-mvebu/Kconfig
> +++ b/arch/arm/mach-mvebu/Kconfig
> @@ -2,7 +2,6 @@ menuconfig ARCH_MVEBU
> bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
> select ARCH_SUPPORTS_BIG_ENDIAN
> select CLKSRC_MMIO
> - select GENERIC_IRQ_CHIP
> select PINCTRL
> select PLAT_ORION
> select SOC_BUS
> @@ -27,6 +26,7 @@ config MACH_MVEBU_V7
> config MACH_ARMADA_370
> bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
> select ARMADA_370_CLK
> + select ARMADA_370_XP_IRQ
> select CPU_PJ4B
> select MACH_MVEBU_V7
> select PINCTRL_ARMADA_370
> @@ -36,6 +36,7 @@ config MACH_ARMADA_370
>
> config MACH_ARMADA_375
> bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
> + select ARMADA_370_XP_IRQ
> select ARM_ERRATA_720789
> select ARM_ERRATA_753970
> select ARM_GIC
> @@ -54,6 +55,7 @@ config MACH_ARMADA_38X
> select ARM_ERRATA_720789
> select ARM_ERRATA_753970
> select ARM_GIC
> + select ARMADA_370_XP_IRQ
> select ARMADA_38X_CLK
> select HAVE_ARM_SCU
> select HAVE_ARM_TWD if SMP
> @@ -67,6 +69,7 @@ config MACH_ARMADA_38X
> config MACH_ARMADA_39X
> bool "Marvell Armada 39x boards" if ARCH_MULTI_V7
> select ARM_GIC
> + select ARMADA_370_XP_IRQ
> select ARMADA_39X_CLK
> select CACHE_L2X0
> select HAVE_ARM_SCU
> @@ -80,6 +83,7 @@ config MACH_ARMADA_39X
>
> config MACH_ARMADA_XP
> bool "Marvell Armada XP boards" if ARCH_MULTI_V7
> + select ARMADA_370_XP_IRQ
> select ARMADA_XP_CLK
> select CPU_PJ4B
> select MACH_MVEBU_V7
> --
> 2.6.4
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
prev parent reply other threads:[~2015-12-23 11:24 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-21 14:19 [PATCH 0/4] Use new MSI infrastructure on Marvell EBU Thomas Petazzoni
2015-12-21 14:19 ` [PATCH 1/4] irqchip: irq-armada-370-xp: add Kconfig option for the driver Thomas Petazzoni
2015-12-23 11:11 ` Gregory CLEMENT
2015-12-21 14:19 ` [PATCH 2/4] irqchip: irq-armada-370-xp: use the generic MSI infrastructure Thomas Petazzoni
2015-12-23 11:37 ` Gregory CLEMENT
2016-01-26 15:41 ` Thomas Petazzoni
2016-01-26 14:12 ` Marc Zyngier
2016-01-26 15:52 ` Thomas Petazzoni
2016-01-26 16:33 ` Marc Zyngier
2015-12-21 14:19 ` [PATCH 3/4] irqchip: irq-armada-370-xp: use shorter names for irq_chip Thomas Petazzoni
2015-12-23 11:23 ` Gregory CLEMENT
2016-01-26 16:07 ` Thomas Petazzoni
2016-01-26 16:23 ` Gregory CLEMENT
2015-12-21 14:19 ` [PATCH 4/4] ARM: mvebu: use the ARMADA_370_XP_IRQ option Thomas Petazzoni
2015-12-23 11:24 ` Gregory CLEMENT [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87wps5e7b8.fsf@free-electrons.com \
--to=gregory.clement@free-electrons$(echo .)com \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox