From: rmk+kernel@arm•linux.org.uk (Russell King)
To: linux-arm-kernel@lists•infradead.org
Subject: [PATCH 18/44] ARM: l2c: implement fixups for L2 cache controller quirks/errata
Date: Mon, 17 Mar 2014 00:15:02 +0000 [thread overview]
Message-ID: <E1WPLCo-0002d3-Rd@rmk-PC.arm.linux.org.uk> (raw)
In-Reply-To: <20140317001302.GY21483@n2100.arm.linux.org.uk>
Rather than putting quirk handling in __l2c_init(), move it out to a
separate function which individual implementations can specify. This
helps to localise the quirks to those implementations which require
them.
Signed-off-by: Russell King <rmk+kernel@arm•linux.org.uk>
---
arch/arm/mm/cache-l2x0.c | 111 ++++++++++++++++++++++++++++++++++++++++++-----
1 file changed, 100 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index 9bd41f0e3b8a..9d2b55b05f71 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -31,6 +31,7 @@
struct l2c_init_data {
void (*of_parse)(const struct device_node *, u32 *, u32 *);
void (*enable)(void __iomem *, u32);
+ void (*fixup)(void __iomem *, u32, struct outer_cache_fns *);
void (*save)(void __iomem *);
struct outer_cache_fns outer_cache;
};
@@ -382,9 +383,79 @@ static const struct l2c_init_data l2x0_init_fns __initconst = {
},
};
+/*
+ * L2C-310 specific code.
+ *
+ * Errata:
+ * 588369: PL310 R0P0->R1P0, fixed R2P0.
+ * Affects: all clean+invalidate operations
+ * clean and invalidate skips the invalidate step, so we need to issue
+ * separate operations. We also require the above debug workaround
+ * enclosing this code fragment on affected parts. On unaffected parts,
+ * we must not use this workaround without the debug register writes
+ * to avoid exposing a problem similar to 727915.
+ *
+ * 727915: PL310 R2P0->R3P0, fixed R3P1.
+ * Affects: clean+invalidate by way
+ * clean and invalidate by way runs in the background, and a store can
+ * hit the line between the clean operation and invalidate operation,
+ * resulting in the store being lost.
+ *
+ * 753970: PL310 R3P0, fixed R3P1.
+ * Affects: sync
+ * prevents merging writes after the sync operation, until another L2C
+ * operation is performed (or a number of other conditions.)
+ *
+ * 769419: PL310 R0P0->R3P1, fixed R3P2.
+ * Affects: store buffer
+ * store buffer is not automatically drained.
+ */
+static void __init l2c310_fixup(void __iomem *base, u32 cache_id,
+ struct outer_cache_fns *fns)
+{
+ unsigned revision = cache_id & L2X0_CACHE_ID_RTL_MASK;
+ const char *errata[4];
+ unsigned n = 0;
+
+ if (revision <= L310_CACHE_ID_RTL_R3P0)
+ fns->set_debug = pl310_set_debug;
+
+ if (IS_ENABLED(CONFIG_PL310_ERRATA_753970) &&
+ revision == L310_CACHE_ID_RTL_R3P0) {
+ sync_reg_offset = L2X0_DUMMY_REG;
+ errata[n++] = "753970";
+ }
+
+ if (IS_ENABLED(CONFIG_PL310_ERRATA_769419))
+ errata[n++] = "769419";
+
+ if (n) {
+ unsigned i;
+
+ pr_info("L2C-310 errat%s", n > 1 ? "a" : "um");
+ for (i = 0; i < n; i++)
+ pr_cont(" %s", errata[i]);
+ pr_cont(" enabled\n");
+ }
+}
+
+static const struct l2c_init_data l2c310_init_fns __initconst = {
+ .enable = l2x0_enable,
+ .fixup = l2c310_fixup,
+ .outer_cache = {
+ .inv_range = l2x0_inv_range,
+ .clean_range = l2x0_clean_range,
+ .flush_range = l2x0_flush_range,
+ .flush_all = l2x0_flush_all,
+ .disable = l2x0_disable,
+ .sync = l2x0_cache_sync,
+ },
+};
+
static void __init __l2c_init(const struct l2c_init_data *data,
u32 aux_val, u32 aux_mask, u32 cache_id)
{
+ struct outer_cache_fns fns;
u32 aux;
u32 way_size = 0;
int ways;
@@ -411,23 +482,20 @@ static void __init __l2c_init(const struct l2c_init_data *data,
else
ways = 8;
type = "L310";
-#ifdef CONFIG_PL310_ERRATA_753970
- /* Unmapped register. */
- sync_reg_offset = L2X0_DUMMY_REG;
-#endif
break;
+
case L2X0_CACHE_ID_PART_L210:
ways = (aux >> 13) & 0xf;
type = "L210";
break;
case AURORA_CACHE_ID:
- sync_reg_offset = AURORA_SYNC_REG;
ways = (aux >> 13) & 0xf;
ways = 2 << ((ways + 1) >> 2);
way_size_shift = AURORA_WAY_SIZE_SHIFT;
type = "Aurora";
break;
+
default:
/* Assume unknown chips have 8 ways */
ways = 8;
@@ -445,6 +513,10 @@ static void __init __l2c_init(const struct l2c_init_data *data,
l2x0_size = ways * way_size * SZ_1K;
+ fns = data->outer_cache;
+ if (data->fixup)
+ data->fixup(l2x0_base, cache_id, &fns);
+
/*
* Check if l2x0 controller is already enabled. If we are booting
* in non-secure mode accessing the below registers will fault.
@@ -458,11 +530,7 @@ static void __init __l2c_init(const struct l2c_init_data *data,
/* Save the value for resuming. */
l2x0_saved_regs.aux_ctrl = aux;
- outer_cache = data->outer_cache;
-
- if ((cache_id & L2X0_CACHE_ID_PART_MASK) == L2X0_CACHE_ID_PART_L310 &&
- (cache_id & L2X0_CACHE_ID_RTL_MASK) <= L310_CACHE_ID_RTL_R3P0)
- outer_cache.set_debug = pl310_set_debug;
+ outer_cache = fns;
pr_info("%s cache controller enabled\n", type);
pr_info("l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d kB\n",
@@ -471,13 +539,24 @@ static void __init __l2c_init(const struct l2c_init_data *data,
void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
{
+ const struct l2c_init_data *data;
u32 cache_id;
l2x0_base = base;
cache_id = readl_relaxed(base + L2X0_CACHE_ID);
- __l2c_init(&l2x0_init_fns, aux_val, aux_mask, cache_id);
+ switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
+ default:
+ data = &l2x0_init_fns;
+ break;
+
+ case L2X0_CACHE_ID_PART_L310:
+ data = &l2c310_init_fns;
+ break;
+ }
+
+ __l2c_init(data, aux_val, aux_mask, cache_id);
}
#ifdef CONFIG_OF
@@ -646,6 +725,7 @@ static void pl310_resume(void)
static const struct l2c_init_data of_pl310_data __initconst = {
.of_parse = pl310_of_parse,
.enable = l2x0_enable,
+ .fixup = l2c310_fixup,
.save = pl310_save,
.outer_cache = {
.inv_range = l2x0_inv_range,
@@ -793,6 +873,12 @@ static void __init aurora_enable_no_outer(void __iomem *base, u32 aux)
aurora_enable(base, aux);
}
+static void __init aurora_fixup(void __iomem *base, u32 cache_id,
+ struct outer_cache_fns *fns)
+{
+ sync_reg_offset = AURORA_SYNC_REG;
+}
+
static void __init aurora_of_parse(const struct device_node *np,
u32 *aux_val, u32 *aux_mask)
{
@@ -818,6 +904,7 @@ static void __init aurora_of_parse(const struct device_node *np,
static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
.of_parse = aurora_of_parse,
.enable = aurora_enable,
+ .fixup = aurora_fixup,
.save = aurora_save,
.outer_cache = {
.inv_range = aurora_inv_range,
@@ -833,6 +920,7 @@ static const struct l2c_init_data of_aurora_with_outer_data __initconst = {
static const struct l2c_init_data of_aurora_no_outer_data __initconst = {
.of_parse = aurora_of_parse,
.enable = aurora_enable_no_outer,
+ .fixup = aurora_fixup,
.save = aurora_save,
.outer_cache = {
.resume = aurora_resume,
@@ -983,6 +1071,7 @@ static void bcm_flush_range(unsigned long start, unsigned long end)
static const struct l2c_init_data of_bcm_l2x0_data __initconst = {
.of_parse = pl310_of_parse,
.enable = l2x0_enable,
+ .fixup = l2c310_fixup,
.save = pl310_save,
.outer_cache = {
.inv_range = bcm_inv_range,
--
1.8.3.1
next prev parent reply other threads:[~2014-03-17 0:15 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-17 0:13 [PATCH 00/44] outer cache changes Russell King - ARM Linux
2014-03-17 0:13 ` [PATCH 01/44] ARM: l2c: remove outer_inv_all() method Russell King
2014-03-17 0:13 ` [PATCH 02/44] ARM: l2c: remove unnecessary call to outer_flush_all() Russell King
2014-03-17 0:13 ` [PATCH 03/44] ARM: l2c: avoid calling outer_flush_all() unnecessarily (Spear) Russell King
2014-03-17 0:13 ` [PATCH 04/44] ARM: l2c: add helper for L2 cache controller DT IDs Russell King
2014-03-26 20:30 ` Rob Herring
2014-03-17 0:13 ` [PATCH 05/44] ARM: l2c: tidy up l2x0_of_data declarations Russell King
2014-03-17 0:14 ` [PATCH 06/44] ARM: l2c: rename OF specific things, making l2x0_of_data available to all Russell King
2014-03-17 0:14 ` [PATCH 07/44] ARM: l2c: provide generic function for calling set_debug method Russell King
2014-03-17 0:14 ` [PATCH 08/44] ARM: l2c: split out cache unlock code Russell King
2014-03-17 0:14 ` [PATCH 09/44] ARM: l2c: provide generic helper for way-based operations Russell King
2014-03-17 0:14 ` [PATCH 10/44] ARM: l2c: rename cache_wait_way() Russell King
2014-03-17 0:14 ` [PATCH 11/44] ARM: l2c: use add L2C revision constants Russell King
2014-03-17 0:14 ` [PATCH 12/44] ARM: l2c: clean up OF initialisation a bit Russell King
2014-03-17 0:14 ` [PATCH 13/44] ARM: l2c: pass iomem address into data->save function Russell King
2014-03-17 0:14 ` [PATCH 14/44] ARM: l2c: move l2c save function to __l2c_init() Russell King
2014-03-17 0:14 ` [PATCH 15/44] ARM: l2c: provide enable method Russell King
2014-03-17 0:14 ` [PATCH 16/44] ARM: l2c: move aurora broadcast setup to enable function Russell King
2014-03-17 0:14 ` [PATCH 17/44] ARM: l2c: group implementation specific code together Russell King
2014-03-17 0:15 ` Russell King [this message]
2014-03-17 0:15 ` [PATCH 19/44] ARM: l2c: clean up L2 cache initialisation messages Russell King
2014-03-17 0:15 ` [PATCH 20/44] ARM: l2c: split L2C-310 enable function from l2x0 code Russell King
2014-03-17 0:15 ` [PATCH 21/44] ARM: l2c: move and add ARM L2C-2x0/L2C-310 save/resume code to non-OF Russell King
2014-03-17 0:15 ` [PATCH 22/44] ARM: l2c: clean up save/resume functions Russell King
2014-03-17 0:15 ` [PATCH 23/44] ARM: l2c: simplify l2x0 unlocking code Russell King
2014-03-17 0:15 ` [PATCH 24/44] ARM: l2c: move pl310_set_debug() into l2c-310 code Russell King
2014-03-17 0:15 ` [PATCH 25/44] ARM: l2c: add L2C-210 specific handlers Russell King
2014-03-17 0:15 ` [PATCH 26/44] ARM: l2c: implement L2C-310 erratum 727915 as a method override Russell King
2014-03-17 0:15 ` [PATCH 27/44] ARM: l2c: Implement L2C-310 erratum 588369 " Russell King
2014-03-17 0:15 ` [PATCH 28/44] ARM: l2c: use L2C-210 handlers for L2C-310 errata-less implementations Russell King
2014-03-17 0:15 ` [PATCH 29/44] ARM: l2c: add L2C-220 specific handlers Russell King
2014-03-17 0:16 ` [PATCH 30/44] ARM: l2c: remove obsolete l2x0 ops for non-OF init Russell King
2014-03-17 0:16 ` [PATCH 31/44] ARM: l2c: move type string into l2c_init_data structure Russell King
2014-03-17 0:16 ` [PATCH 32/44] ARM: l2c: add decode for L2C-220 cache ways Russell King
2014-03-17 0:16 ` [PATCH 33/44] ARM: l2c: move way size calculation data into l2c_init_data Russell King
2014-03-17 0:16 ` [PATCH 34/44] ARM: outer cache: add documentation of outer cache functions Russell King
2014-03-17 0:16 ` [PATCH 35/44] ARM: outer cache: add WARN_ON() to outer_disable() Russell King
2014-03-17 0:16 ` [PATCH 36/44] ARM: l2c: move errata configuration options to arch/arm/mm/Kconfig Russell King
2014-03-17 0:16 ` [PATCH 37/44] ARM: l2c: provide generic hook to intercept writes to secure registers Russell King
2014-03-17 0:16 ` [PATCH 38/44] ARM: l2c: OMAP: implement new write_sec method Russell King
2014-03-17 0:16 ` [PATCH 39/44] ARM: l2c: highbank: " Russell King
2014-03-26 20:35 ` Rob Herring
2014-03-17 0:16 ` [PATCH 40/44] ARM: l2c: ux500: implement dummy " Russell King
2014-03-17 0:17 ` [PATCH 41/44] ARM: l2c: remove old .set_debug method Russell King
2014-03-17 0:17 ` [PATCH 42/44] ARM: l2c: implement L2C-310 erratum 752271 in core L2C code Russell King
2014-03-17 0:17 ` [PATCH 43/44] ARM: l2c: rename all L2C-310 constants with an L310_ prefix Russell King
2014-03-17 0:17 ` [PATCH 44/44] ARM: l2c: add L2C-310 power control DT properties Russell King
2014-03-26 21:08 ` Rob Herring
2014-03-28 13:29 ` Russell King - ARM Linux
2014-03-26 20:05 ` [PATCH 00/44] outer cache changes Gregory CLEMENT
2014-03-28 18:50 ` Nishanth Menon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E1WPLCo-0002d3-Rd@rmk-PC.arm.linux.org.uk \
--to=rmk+kernel@arm$(echo .)linux.org.uk \
--cc=linux-arm-kernel@lists$(echo .)infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox