From: Subrata Modak <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public•gmane.org>
To: linux-usb-u79uwXL29TY76Z2rM5mHXA@public•gmane.org,
David Brownell <david-b-yBeKhBN/0LDR7s880joybQ@public•gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public•gmane.org>
Cc: David Brownell
<dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public•gmane.org>,
Sachin P Sant
<sachinp-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public•gmane.org>,
Kumar Gala
<galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public•gmane.org>,
Linux-Kernel
<linux-kernel-u79uwXL29TY76Z2rM5mHXA@public•gmane.org>,
Randy Dunlap
<randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public•gmane.org>,
Linux-Next <linux-next-u79uwXL29TY76Z2rM5mHXA@public•gmane.org>,
Jon Smirl <jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public•gmane.org>,
Linuxppc-dev
<Linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public•gmane.org>,
Roman Weissgaerber
<weissg-TVDPYGuBT+ReoWH0uzbU5w@public•gmane.org>,
Stephen Rothwell <sfr-3FnU+UHB4dNDw9hX6IcOSA@public•gmane.org>,
kernel-OLH4Qvv75CYX/NnBR394Jw@public•gmane.org
Subject: Re: [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o]
Date: Wed, 10 Jun 2009 00:06:31 +0530 [thread overview]
Message-ID: <1244572592.5497.35.camel@subratamodak.linux.ibm.com> (raw)
In-Reply-To: <20090605182651.24094.36577.sendpatchset-yA/sI1izFwLkOmf+N4b0O9FgqiXiwxn+0E9HWUfgJXw@public.gmane.org>
On Fri, 2009-06-05 at 13:26 -0500, Subrata Modak wrote:
> >On Thu, 2009-06-04 at 10:07 -0400, Jon Smirl wrote:
> >On Thu, Jun 4, 2009 at 9:31 AM, Subrata Modak
> > <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public•gmane.org> wrote:
> > > CC drivers/usb/host/ohci-hcd.o
> > > In file included from drivers/usb/host/ohci-hcd.c:1060:
> > > drivers/usb/host/ohci-ppc-of.c:242:2: error: #error "No endianess selected for ppc-of-ohci"
> > > make[3]: *** [drivers/usb/host/ohci-hcd.o] Error 1
> > > make[2]: *** [drivers/usb/host] Error 2
> > > make[1]: *** [drivers/usb] Error 2
> > > make: *** [drivers] Error 2
> > >
> > > I reported this earlier, and there were some discussions:
> > > http://groups.google.co.kr/group/linux.kernel/browse_thread/thread/edff9d5572d3d225
> >
> > Proposed patch by Arnd should fix this. It has not been merged.
> > http://lkml.org/lkml/2009/4/22/49
>
> Correct, it fixes the issue. However, since few changes might have gone
> to the Kconfig, the patch does not apply cleanly. Below is the patch, just
> a retake of the earlier one, but on the latest code.
>
> David,
>
> Can you please pickup the following patch ?
David,
Is it you who will be merging this patch. Or, do i need to send it to
somebody else ?
Regards--
Subrata
>
> Signed-off-by: Arnd Bergmann <arnd-r2nGTMty4D4@public•gmane.org>,
> Resent-by: Subrata Modak <subrata-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public•gmane.org>
> ---
>
> --- linux-2.6.30-rc8/drivers/usb/host/Kconfig.orig 2009-06-05 10:31:30.000000000 -0500
> +++ linux-2.6.30-rc8/drivers/usb/host/Kconfig 2009-06-05 10:37:53.000000000 -0500
> @@ -181,26 +181,26 @@ config USB_OHCI_HCD_PPC_SOC
> Enables support for the USB controller on the MPC52xx or
> STB03xxx processor chip. If unsure, say Y.
>
> -config USB_OHCI_HCD_PPC_OF
> - bool "OHCI support for PPC USB controller on OF platform bus"
> - depends on USB_OHCI_HCD && PPC_OF
> - default y
> - ---help---
> - Enables support for the USB controller PowerPC present on the
> - OpenFirmware platform bus.
> -
> config USB_OHCI_HCD_PPC_OF_BE
> - bool "Support big endian HC"
> - depends on USB_OHCI_HCD_PPC_OF
> - default y
> + bool "OHCI support for OF platform bus (big endian)"
> + depends on USB_OHCI_HCD && PPC_OF
> select USB_OHCI_BIG_ENDIAN_DESC
> select USB_OHCI_BIG_ENDIAN_MMIO
> + ---help---
> + Enables support for big-endian USB controllers present on the
> + OpenFirmware platform bus.
>
> config USB_OHCI_HCD_PPC_OF_LE
> - bool "Support little endian HC"
> - depends on USB_OHCI_HCD_PPC_OF
> - default n
> + bool "OHCI support for OF platform bus (little endian)"
> + depends on USB_OHCI_HCD && PPC_OF
> select USB_OHCI_LITTLE_ENDIAN
> + ---help---
> + Enables support for little-endian USB controllers present on the
> + OpenFirmware platform bus.
> +
> + config USB_OHCI_HCD_PPC_OF
> + bool
> + default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
>
> config USB_OHCI_HCD_PCI
> bool "OHCI support for PCI-bus USB controllers"
>
> ---
> Regards--
> Subrata
> >
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public•gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2009-06-09 18:36 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-06-05 18:26 [BUILD FAILURE 02/04] Next June 04:PPC64 randconfig [drivers/usb/host/ohci-hcd.o] Subrata Modak
[not found] ` <20090605182651.24094.36577.sendpatchset-yA/sI1izFwLkOmf+N4b0O9FgqiXiwxn+0E9HWUfgJXw@public.gmane.org>
2009-06-09 18:36 ` Subrata Modak [this message]
2009-06-10 0:38 ` David Brownell
[not found] ` <200906091738.58154.david-b-yBeKhBN/0LDR7s880joybQ@public.gmane.org>
2009-06-12 9:35 ` Subrata Modak
[not found] ` <1244799348.5234.13.camel-NRFfyExJdYpgXGGE5LP+UZlqa2bBAFbm0E9HWUfgJXw@public.gmane.org>
2009-06-15 6:51 ` Subrata Modak
2009-06-17 12:53 ` Subrata Modak
2009-06-17 18:15 ` Grant Likely
2009-06-17 20:06 ` Grant Likely
-- strict thread matches above, loose matches on Subject: below --
2009-06-04 13:31 Subrata Modak
2009-06-04 14:07 ` Jon Smirl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1244572592.5497.35.camel@subratamodak.linux.ibm.com \
--to=subrata-23vcf4htsmix0ybbhkvfkdbpr1lh4cv8@public$(echo .)gmane.org \
--cc=Linuxppc-dev-mnsaURCQ41sdnm+yROfE0A@public$(echo .)gmane.org \
--cc=arnd-r2nGTMty4D4@public$(echo .)gmane.org \
--cc=david-b-yBeKhBN/0LDR7s880joybQ@public$(echo .)gmane.org \
--cc=dbrownell-Rn4VEauK+AKRv+LV9MX5uipxlwaOVQ5f@public$(echo .)gmane.org \
--cc=galak-XVmvHMARGAS8U2dJNN8I7kB+6BGkLq7r@public$(echo .)gmane.org \
--cc=jonsmirl-Re5JQEeQqe8AvxtiuMwx3w@public$(echo .)gmane.org \
--cc=kernel-OLH4Qvv75CYX/NnBR394Jw@public$(echo .)gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public$(echo .)gmane.org \
--cc=linux-next-u79uwXL29TY76Z2rM5mHXA@public$(echo .)gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public$(echo .)gmane.org \
--cc=randy.dunlap-QHcLZuEGTsvQT0dZR+AlfA@public$(echo .)gmane.org \
--cc=sachinp-23VcF4HTsmIX0ybBhKVfKdBPR1lH4CV8@public$(echo .)gmane.org \
--cc=sfr-3FnU+UHB4dNDw9hX6IcOSA@public$(echo .)gmane.org \
--cc=weissg-TVDPYGuBT+ReoWH0uzbU5w@public$(echo .)gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox