* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ]
@ 2013-08-21 10:35 Sedat Dilek
2013-08-21 13:44 ` Daniel Vetter
0 siblings, 1 reply; 16+ messages in thread
From: Sedat Dilek @ 2013-08-21 10:35 UTC (permalink / raw)
To: Daniel Vetter, Chris Wilson; +Cc: linux-next, LKML, intel-gfx, Stephen Rothwell
On Wed, Aug 21, 2013 at 11:21 AM, Stephen Rothwell <sfr@canb•auug.org.au> wrote:
> Hi all,
>
> There will be no linux-next trees on Aug 23 or 26.
>
> Changes since 20130820:
>
> New tree: aio-direct
>
> Removed tree: xilinx (at maintainer's request)
>
> The xfs tree still had its build failure for which I reverted a commit.
>
> The trivial tree gained conflicts against the crypto, net-next and
> wireless trees.
>
> The aio tree gained conflicts against the aio-direct tree.
>
> The akpm-current tree gained conflicts against the modules and aio-direct
> trees.
>
> ----------------------------------------------------------------------------
>
Hi,
I still have this issue with next-20130821 and "Linux v3.11-rc6 plus
drm-intel-nightly on top"
Any new development on this?
Patches?
Currently, I have two workarounds:
[1] Revert this commit:
commit 5456fe3882812aba251886e36fe55bfefb8e8829
"drm/i915: Allocate LLC ringbuffers from stolen"
[2] Stop and start lightdm session manually
...switch to a VT and do a stop/start lightdm.
Any help appreciated.
BTW, I switched my Linux/X graphics stack to Mesa v9.2-rc1 and
Intel-DDX v2.21.14-55-ged40a7c (LibDRM is still v2.4.46).
Thanks.
Regards,
- Sedat -
P.S.: The suspend/resume problem which I saw parallelly on former
-next releases is gone.
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-21 10:35 linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] Sedat Dilek @ 2013-08-21 13:44 ` Daniel Vetter 2013-08-21 18:11 ` Sedat Dilek 0 siblings, 1 reply; 16+ messages in thread From: Daniel Vetter @ 2013-08-21 13:44 UTC (permalink / raw) To: Sedat Dilek Cc: Daniel Vetter, Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell On Wed, Aug 21, 2013 at 12:35:08PM +0200, Sedat Dilek wrote: > On Wed, Aug 21, 2013 at 11:21 AM, Stephen Rothwell <sfr@canb•auug.org.au> wrote: > > Hi all, > > > > There will be no linux-next trees on Aug 23 or 26. > > > > Changes since 20130820: > > > > New tree: aio-direct > > > > Removed tree: xilinx (at maintainer's request) > > > > The xfs tree still had its build failure for which I reverted a commit. > > > > The trivial tree gained conflicts against the crypto, net-next and > > wireless trees. > > > > The aio tree gained conflicts against the aio-direct tree. > > > > The akpm-current tree gained conflicts against the modules and aio-direct > > trees. > > > > ---------------------------------------------------------------------------- > > > > Hi, > > I still have this issue with next-20130821 and "Linux v3.11-rc6 plus > drm-intel-nightly on top" > Any new development on this? > Patches? Tbh I'm at a loss what we could try above&beyond what Chris has already tried out. > Currently, I have two workarounds: > > [1] Revert this commit: > > commit 5456fe3882812aba251886e36fe55bfefb8e8829 > "drm/i915: Allocate LLC ringbuffers from stolen" Since with a rather decent chance the next testing cycle I'll do this friday will be the last chunk of features for 3.12 I'll probably drop the above patch from my queue and we can try again in 3.13. Cheers, Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-21 13:44 ` Daniel Vetter @ 2013-08-21 18:11 ` Sedat Dilek 2013-08-21 21:20 ` Daniel Vetter 0 siblings, 1 reply; 16+ messages in thread From: Sedat Dilek @ 2013-08-21 18:11 UTC (permalink / raw) To: Sedat Dilek, Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell Cc: Daniel Vetter [-- Attachment #1: Type: text/plain, Size: 1906 bytes --] On Wed, Aug 21, 2013 at 3:44 PM, Daniel Vetter <daniel@ffwll•ch> wrote: > On Wed, Aug 21, 2013 at 12:35:08PM +0200, Sedat Dilek wrote: >> On Wed, Aug 21, 2013 at 11:21 AM, Stephen Rothwell <sfr@canb•auug.org.au> wrote: >> > Hi all, >> > >> > There will be no linux-next trees on Aug 23 or 26. >> > >> > Changes since 20130820: >> > >> > New tree: aio-direct >> > >> > Removed tree: xilinx (at maintainer's request) >> > >> > The xfs tree still had its build failure for which I reverted a commit. >> > >> > The trivial tree gained conflicts against the crypto, net-next and >> > wireless trees. >> > >> > The aio tree gained conflicts against the aio-direct tree. >> > >> > The akpm-current tree gained conflicts against the modules and aio-direct >> > trees. >> > >> > ---------------------------------------------------------------------------- >> > >> >> Hi, >> >> I still have this issue with next-20130821 and "Linux v3.11-rc6 plus >> drm-intel-nightly on top" >> Any new development on this? >> Patches? > > Tbh I'm at a loss what we could try above&beyond what Chris has already > tried out. > >> Currently, I have two workarounds: >> >> [1] Revert this commit: >> >> commit 5456fe3882812aba251886e36fe55bfefb8e8829 >> "drm/i915: Allocate LLC ringbuffers from stolen" > > Since with a rather decent chance the next testing cycle I'll do this > friday will be the last chunk of features for 3.12 I'll probably drop the > above patch from my queue and we can try again in 3.13. > Inspired by [1] I have switched from UXA to SNA... ...and applied "[PATCH] drm/i915: Cleaning up the relocate entry function" on top of next-20130821... ...and can NOT see the screen corruptions anymore. Can you explain that? - Sedat - [1] http://cynic.cc/blog//posts/sna_acceleration_vs_uxa/ [2] http://lists.freedesktop.org/archives/intel-gfx/2013-August/032182.html [3] https://patchwork.kernel.org/patch/2847846/ [-- Attachment #2: xorg.conf --] [-- Type: application/octet-stream, Size: 122 bytes --] Section "Device" Identifier "Intel Graphics" Driver "intel" Option "AccelMethod" "sna" EndSection ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-21 18:11 ` Sedat Dilek @ 2013-08-21 21:20 ` Daniel Vetter 2013-08-22 6:32 ` Sedat Dilek 0 siblings, 1 reply; 16+ messages in thread From: Daniel Vetter @ 2013-08-21 21:20 UTC (permalink / raw) To: Sedat Dilek Cc: Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell, Daniel Vetter On Wed, Aug 21, 2013 at 08:11:27PM +0200, Sedat Dilek wrote: > On Wed, Aug 21, 2013 at 3:44 PM, Daniel Vetter <daniel@ffwll•ch> wrote: > > On Wed, Aug 21, 2013 at 12:35:08PM +0200, Sedat Dilek wrote: > >> On Wed, Aug 21, 2013 at 11:21 AM, Stephen Rothwell <sfr@canb•auug.org.au> wrote: > >> > Hi all, > >> > > >> > There will be no linux-next trees on Aug 23 or 26. > >> > > >> > Changes since 20130820: > >> > > >> > New tree: aio-direct > >> > > >> > Removed tree: xilinx (at maintainer's request) > >> > > >> > The xfs tree still had its build failure for which I reverted a commit. > >> > > >> > The trivial tree gained conflicts against the crypto, net-next and > >> > wireless trees. > >> > > >> > The aio tree gained conflicts against the aio-direct tree. > >> > > >> > The akpm-current tree gained conflicts against the modules and aio-direct > >> > trees. > >> > > >> > ---------------------------------------------------------------------------- > >> > > >> > >> Hi, > >> > >> I still have this issue with next-20130821 and "Linux v3.11-rc6 plus > >> drm-intel-nightly on top" > >> Any new development on this? > >> Patches? > > > > Tbh I'm at a loss what we could try above&beyond what Chris has already > > tried out. > > > >> Currently, I have two workarounds: > >> > >> [1] Revert this commit: > >> > >> commit 5456fe3882812aba251886e36fe55bfefb8e8829 > >> "drm/i915: Allocate LLC ringbuffers from stolen" > > > > Since with a rather decent chance the next testing cycle I'll do this > > friday will be the last chunk of features for 3.12 I'll probably drop the > > above patch from my queue and we can try again in 3.13. > > > > Inspired by [1] I have switched from UXA to SNA... > ...and applied "[PATCH] drm/i915: Cleaning up the relocate entry > function" on top of next-20130821... > ...and can NOT see the screen corruptions anymore. > > Can you explain that? If the relocate cleanup patch [1] is indeed required, then I can't explain this at all. Can you please double-check that this is really it, and that it's not the uxa->sna switch? Thanks, Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-21 21:20 ` Daniel Vetter @ 2013-08-22 6:32 ` Sedat Dilek 2013-08-22 7:24 ` Daniel Vetter 0 siblings, 1 reply; 16+ messages in thread From: Sedat Dilek @ 2013-08-22 6:32 UTC (permalink / raw) To: Sedat Dilek, Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell Cc: Daniel Vetter On Wed, Aug 21, 2013 at 11:20 PM, Daniel Vetter <daniel@ffwll•ch> wrote: > On Wed, Aug 21, 2013 at 08:11:27PM +0200, Sedat Dilek wrote: >> On Wed, Aug 21, 2013 at 3:44 PM, Daniel Vetter <daniel@ffwll•ch> wrote: >> > On Wed, Aug 21, 2013 at 12:35:08PM +0200, Sedat Dilek wrote: >> >> On Wed, Aug 21, 2013 at 11:21 AM, Stephen Rothwell <sfr@canb•auug.org.au> wrote: >> >> > Hi all, >> >> > >> >> > There will be no linux-next trees on Aug 23 or 26. >> >> > >> >> > Changes since 20130820: >> >> > >> >> > New tree: aio-direct >> >> > >> >> > Removed tree: xilinx (at maintainer's request) >> >> > >> >> > The xfs tree still had its build failure for which I reverted a commit. >> >> > >> >> > The trivial tree gained conflicts against the crypto, net-next and >> >> > wireless trees. >> >> > >> >> > The aio tree gained conflicts against the aio-direct tree. >> >> > >> >> > The akpm-current tree gained conflicts against the modules and aio-direct >> >> > trees. >> >> > >> >> > ---------------------------------------------------------------------------- >> >> > >> >> >> >> Hi, >> >> >> >> I still have this issue with next-20130821 and "Linux v3.11-rc6 plus >> >> drm-intel-nightly on top" >> >> Any new development on this? >> >> Patches? >> > >> > Tbh I'm at a loss what we could try above&beyond what Chris has already >> > tried out. >> > >> >> Currently, I have two workarounds: >> >> >> >> [1] Revert this commit: >> >> >> >> commit 5456fe3882812aba251886e36fe55bfefb8e8829 >> >> "drm/i915: Allocate LLC ringbuffers from stolen" >> > >> > Since with a rather decent chance the next testing cycle I'll do this >> > friday will be the last chunk of features for 3.12 I'll probably drop the >> > above patch from my queue and we can try again in 3.13. >> > >> >> Inspired by [1] I have switched from UXA to SNA... >> ...and applied "[PATCH] drm/i915: Cleaning up the relocate entry >> function" on top of next-20130821... >> ...and can NOT see the screen corruptions anymore. >> >> Can you explain that? > > If the relocate cleanup patch [1] is indeed required, then I can't explain > this at all. Can you please double-check that this is really it, and that > it's not the uxa->sna switch? > It's independent of the applied patch. My problem goes away with SNA but still exists with UXA. As said in my previous analysis... switching back to Ubuntu's graphics did not show the symptoms, too. It's interesting to see, it is a problem of the intel-ddx. Anyway, SNA seems here to be approx. 20% faster in gtkperf-0.40, so I will use it. I am open and willing to test any patches you will provide. Please, let me know. Thanks. - Sedat - ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-22 6:32 ` Sedat Dilek @ 2013-08-22 7:24 ` Daniel Vetter 2013-08-22 11:13 ` Sedat Dilek 0 siblings, 1 reply; 16+ messages in thread From: Daniel Vetter @ 2013-08-22 7:24 UTC (permalink / raw) To: Sedat Dilek Cc: Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell, Daniel Vetter On Thu, Aug 22, 2013 at 08:32:47AM +0200, Sedat Dilek wrote: > It's independent of the applied patch. > My problem goes away with SNA but still exists with UXA. > > As said in my previous analysis... switching back to Ubuntu's graphics > did not show the symptoms, too. > > It's interesting to see, it is a problem of the intel-ddx. Nope, it's just that uxa and sna have completely different buffer object usage patterns. Not the first time only one of them hits an issue ... > Anyway, SNA seems here to be approx. 20% faster in gtkperf-0.40, so I > will use it. > > I am open and willing to test any patches you will provide. > Please, let me know. Found a new bugger, please test the below patch. Thanks, Daniel --- diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index ef92c69..e0bff07 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2616,6 +2616,9 @@ int i915_vma_unbind(struct i915_vma *vma) drm_i915_private_t *dev_priv = obj->base.dev->dev_private; int ret; + /* For now we only ever use 1 vma per object */ + WARN_ON(!list_is_singular(&obj->vma_list)); + if (list_empty(&vma->vma_link)) return 0; @@ -2661,7 +2664,9 @@ int i915_vma_unbind(struct i915_vma *vma) drm_mm_remove_node(&vma->node); destroy: - i915_gem_vma_destroy(vma); + /* Keep the vma as a placeholder in the execbuffer reservation lists */ + if (!list_empty(&vma->exec_list)) + i915_gem_vma_destroy(vma); /* Since the unbound list is global, only move to that list if * no more VMAs exist. @@ -4171,10 +4176,6 @@ void i915_gem_vma_destroy(struct i915_vma *vma) WARN_ON(vma->node.allocated); list_del(&vma->vma_link); - /* Keep the vma as a placeholder in the execbuffer reservation lists */ - if (!list_empty(&vma->exec_list)) - return; - kfree(vma); } -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply related [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-22 7:24 ` Daniel Vetter @ 2013-08-22 11:13 ` Sedat Dilek 2013-08-22 11:22 ` Sedat Dilek 2013-08-22 11:30 ` Daniel Vetter 0 siblings, 2 replies; 16+ messages in thread From: Sedat Dilek @ 2013-08-22 11:13 UTC (permalink / raw) To: Sedat Dilek, Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell Cc: Daniel Vetter, s.dilek [-- Attachment #1: Type: text/plain, Size: 2549 bytes --] On Thu, Aug 22, 2013 at 9:24 AM, Daniel Vetter <daniel@ffwll•ch> wrote: > On Thu, Aug 22, 2013 at 08:32:47AM +0200, Sedat Dilek wrote: >> It's independent of the applied patch. >> My problem goes away with SNA but still exists with UXA. >> >> As said in my previous analysis... switching back to Ubuntu's graphics >> did not show the symptoms, too. >> >> It's interesting to see, it is a problem of the intel-ddx. > > Nope, it's just that uxa and sna have completely different buffer object > usage patterns. Not the first time only one of them hits an issue ... > >> Anyway, SNA seems here to be approx. 20% faster in gtkperf-0.40, so I >> will use it. >> >> I am open and willing to test any patches you will provide. >> Please, let me know. > > Found a new bugger, please test the below patch. > > Thanks, Daniel > --- > diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c > index ef92c69..e0bff07 100644 > --- a/drivers/gpu/drm/i915/i915_gem.c > +++ b/drivers/gpu/drm/i915/i915_gem.c > @@ -2616,6 +2616,9 @@ int i915_vma_unbind(struct i915_vma *vma) > drm_i915_private_t *dev_priv = obj->base.dev->dev_private; > int ret; > > + /* For now we only ever use 1 vma per object */ > + WARN_ON(!list_is_singular(&obj->vma_list)); > + > if (list_empty(&vma->vma_link)) > return 0; > > @@ -2661,7 +2664,9 @@ int i915_vma_unbind(struct i915_vma *vma) > drm_mm_remove_node(&vma->node); > > destroy: > - i915_gem_vma_destroy(vma); > + /* Keep the vma as a placeholder in the execbuffer reservation lists */ > + if (!list_empty(&vma->exec_list)) > + i915_gem_vma_destroy(vma); > > /* Since the unbound list is global, only move to that list if > * no more VMAs exist. > @@ -4171,10 +4176,6 @@ void i915_gem_vma_destroy(struct i915_vma *vma) > WARN_ON(vma->node.allocated); > list_del(&vma->vma_link); > > - /* Keep the vma as a placeholder in the execbuffer reservation lists */ > - if (!list_empty(&vma->exec_list)) > - return; > - > kfree(vma); > } > dmesg (a lot of traces) and kernel-config attached. UXA causes still screen corruption. $ egrep -i 'uxa|sna|accelmethod' /var/log/Xorg.0.log [ 118.951] (**) intel(0): Option "AccelMethod" "uxa" [ 118.960] (II) UXA(0): Driver registered support for the following operations: - Sedat - Is "drm/i915: More vma fixups around unbind/destroy" the nearly same fix? [1] https://patchwork.kernel.org/patch/2848146/ [-- Attachment #2: dmesg_3.11.0-rc6-next20130821-1-iniza-small_with-danvet-patch.txt --] [-- Type: text/plain, Size: 200602 bytes --] [ 0.548060] xhci_hcd 0000:03:00.0: Ring enq = ffff880037969000 (virt), 0x37969000 (dma) [ 0.548062] xhci_hcd 0000:03:00.0: Ring enq updated 0 times [ 0.548067] xhci_hcd 0000:03:00.0: // xHC command ring deq ptr low bits + flags = @00000000 [ 0.548069] xhci_hcd 0000:03:00.0: // xHC command ring deq ptr high bits = @00000000 [ 0.548070] xhci_hcd 0000:03:00.0: ERST memory map follows: [ 0.548072] xhci_hcd 0000:03:00.0: @000000003796b000 37969400 00000000 00000040 00000000 [ 0.548074] xhci_hcd 0000:03:00.0: Event ring: [ 0.548076] xhci_hcd 0000:03:00.0: @0000000037969400 00000000 00000000 00000000 00000000 [ 0.548077] xhci_hcd 0000:03:00.0: @0000000037969410 00000000 00000000 00000000 00000000 [ 0.548079] xhci_hcd 0000:03:00.0: @0000000037969420 00000000 00000000 00000000 00000000 [ 0.548081] xhci_hcd 0000:03:00.0: @0000000037969430 00000000 00000000 00000000 00000000 [ 0.548082] xhci_hcd 0000:03:00.0: @0000000037969440 00000000 00000000 00000000 00000000 [ 0.548084] xhci_hcd 0000:03:00.0: @0000000037969450 00000000 00000000 00000000 00000000 [ 0.548086] xhci_hcd 0000:03:00.0: @0000000037969460 00000000 00000000 00000000 00000000 [ 0.548088] xhci_hcd 0000:03:00.0: @0000000037969470 00000000 00000000 00000000 00000000 [ 0.548090] xhci_hcd 0000:03:00.0: @0000000037969480 00000000 00000000 00000000 00000000 [ 0.548091] xhci_hcd 0000:03:00.0: @0000000037969490 00000000 00000000 00000000 00000000 [ 0.548093] xhci_hcd 0000:03:00.0: @00000000379694a0 00000000 00000000 00000000 00000000 [ 0.548095] xhci_hcd 0000:03:00.0: @00000000379694b0 00000000 00000000 00000000 00000000 [ 0.548096] xhci_hcd 0000:03:00.0: @00000000379694c0 00000000 00000000 00000000 00000000 [ 0.548098] xhci_hcd 0000:03:00.0: @00000000379694d0 00000000 00000000 00000000 00000000 [ 0.548100] xhci_hcd 0000:03:00.0: @00000000379694e0 00000000 00000000 00000000 00000000 [ 0.548102] xhci_hcd 0000:03:00.0: @00000000379694f0 00000000 00000000 00000000 00000000 [ 0.548103] xhci_hcd 0000:03:00.0: @0000000037969500 00000000 00000000 00000000 00000000 [ 0.548105] xhci_hcd 0000:03:00.0: @0000000037969510 00000000 00000000 00000000 00000000 [ 0.548107] xhci_hcd 0000:03:00.0: @0000000037969520 00000000 00000000 00000000 00000000 [ 0.548109] xhci_hcd 0000:03:00.0: @0000000037969530 00000000 00000000 00000000 00000000 [ 0.548111] xhci_hcd 0000:03:00.0: @0000000037969540 00000000 00000000 00000000 00000000 [ 0.548112] xhci_hcd 0000:03:00.0: @0000000037969550 00000000 00000000 00000000 00000000 [ 0.548114] xhci_hcd 0000:03:00.0: @0000000037969560 00000000 00000000 00000000 00000000 [ 0.548116] xhci_hcd 0000:03:00.0: @0000000037969570 00000000 00000000 00000000 00000000 [ 0.548118] xhci_hcd 0000:03:00.0: @0000000037969580 00000000 00000000 00000000 00000000 [ 0.548119] xhci_hcd 0000:03:00.0: @0000000037969590 00000000 00000000 00000000 00000000 [ 0.548121] xhci_hcd 0000:03:00.0: @00000000379695a0 00000000 00000000 00000000 00000000 [ 0.548123] xhci_hcd 0000:03:00.0: @00000000379695b0 00000000 00000000 00000000 00000000 [ 0.548125] xhci_hcd 0000:03:00.0: @00000000379695c0 00000000 00000000 00000000 00000000 [ 0.548126] xhci_hcd 0000:03:00.0: @00000000379695d0 00000000 00000000 00000000 00000000 [ 0.548128] xhci_hcd 0000:03:00.0: @00000000379695e0 00000000 00000000 00000000 00000000 [ 0.548130] xhci_hcd 0000:03:00.0: @00000000379695f0 00000000 00000000 00000000 00000000 [ 0.548132] xhci_hcd 0000:03:00.0: @0000000037969600 00000000 00000000 00000000 00000000 [ 0.548133] xhci_hcd 0000:03:00.0: @0000000037969610 00000000 00000000 00000000 00000000 [ 0.548135] xhci_hcd 0000:03:00.0: @0000000037969620 00000000 00000000 00000000 00000000 [ 0.548137] xhci_hcd 0000:03:00.0: @0000000037969630 00000000 00000000 00000000 00000000 [ 0.548139] xhci_hcd 0000:03:00.0: @0000000037969640 00000000 00000000 00000000 00000000 [ 0.548140] xhci_hcd 0000:03:00.0: @0000000037969650 00000000 00000000 00000000 00000000 [ 0.548142] xhci_hcd 0000:03:00.0: @0000000037969660 00000000 00000000 00000000 00000000 [ 0.548144] xhci_hcd 0000:03:00.0: @0000000037969670 00000000 00000000 00000000 00000000 [ 0.548146] xhci_hcd 0000:03:00.0: @0000000037969680 00000000 00000000 00000000 00000000 [ 0.548147] xhci_hcd 0000:03:00.0: @0000000037969690 00000000 00000000 00000000 00000000 [ 0.548149] xhci_hcd 0000:03:00.0: @00000000379696a0 00000000 00000000 00000000 00000000 [ 0.548151] xhci_hcd 0000:03:00.0: @00000000379696b0 00000000 00000000 00000000 00000000 [ 0.548153] xhci_hcd 0000:03:00.0: @00000000379696c0 00000000 00000000 00000000 00000000 [ 0.548154] xhci_hcd 0000:03:00.0: @00000000379696d0 00000000 00000000 00000000 00000000 [ 0.548156] xhci_hcd 0000:03:00.0: @00000000379696e0 00000000 00000000 00000000 00000000 [ 0.548158] xhci_hcd 0000:03:00.0: @00000000379696f0 00000000 00000000 00000000 00000000 [ 0.548160] xhci_hcd 0000:03:00.0: @0000000037969700 00000000 00000000 00000000 00000000 [ 0.548161] xhci_hcd 0000:03:00.0: @0000000037969710 00000000 00000000 00000000 00000000 [ 0.548163] xhci_hcd 0000:03:00.0: @0000000037969720 00000000 00000000 00000000 00000000 [ 0.548165] xhci_hcd 0000:03:00.0: @0000000037969730 00000000 00000000 00000000 00000000 [ 0.548167] xhci_hcd 0000:03:00.0: @0000000037969740 00000000 00000000 00000000 00000000 [ 0.548168] xhci_hcd 0000:03:00.0: @0000000037969750 00000000 00000000 00000000 00000000 [ 0.548170] xhci_hcd 0000:03:00.0: @0000000037969760 00000000 00000000 00000000 00000000 [ 0.548172] xhci_hcd 0000:03:00.0: @0000000037969770 00000000 00000000 00000000 00000000 [ 0.548174] xhci_hcd 0000:03:00.0: @0000000037969780 00000000 00000000 00000000 00000000 [ 0.548175] xhci_hcd 0000:03:00.0: @0000000037969790 00000000 00000000 00000000 00000000 [ 0.548177] xhci_hcd 0000:03:00.0: @00000000379697a0 00000000 00000000 00000000 00000000 [ 0.548179] xhci_hcd 0000:03:00.0: @00000000379697b0 00000000 00000000 00000000 00000000 [ 0.548181] xhci_hcd 0000:03:00.0: @00000000379697c0 00000000 00000000 00000000 00000000 [ 0.548182] xhci_hcd 0000:03:00.0: @00000000379697d0 00000000 00000000 00000000 00000000 [ 0.548184] xhci_hcd 0000:03:00.0: @00000000379697e0 00000000 00000000 00000000 00000000 [ 0.548186] xhci_hcd 0000:03:00.0: @00000000379697f0 00000000 00000000 00000000 00000000 [ 0.548187] xhci_hcd 0000:03:00.0: Ring has not been updated [ 0.548189] xhci_hcd 0000:03:00.0: Ring deq = ffff880037969400 (virt), 0x37969400 (dma) [ 0.548190] xhci_hcd 0000:03:00.0: Ring deq updated 0 times [ 0.548192] xhci_hcd 0000:03:00.0: Ring enq = ffff880037969400 (virt), 0x37969400 (dma) [ 0.548193] xhci_hcd 0000:03:00.0: Ring enq updated 0 times [ 0.548199] xhci_hcd 0000:03:00.0: ERST deq = 64'h37969400 [ 0.548201] xhci_hcd 0000:03:00.0: // Set the interrupt modulation register [ 0.548207] xhci_hcd 0000:03:00.0: // Enable interrupts, cmd = 0x4. [ 0.548211] xhci_hcd 0000:03:00.0: // Enabling event ring interrupter ffffc90000651020 by writing 0x2 to irq_pending [ 0.548215] xhci_hcd 0000:03:00.0: ffffc90000651020: ir_set[0] [ 0.548217] xhci_hcd 0000:03:00.0: ffffc90000651020: ir_set.pending = 0x2 [ 0.548220] xhci_hcd 0000:03:00.0: ffffc90000651024: ir_set.control = 0xa0 [ 0.548224] xhci_hcd 0000:03:00.0: ffffc90000651028: ir_set.erst_size = 0x1 [ 0.548233] xhci_hcd 0000:03:00.0: ffffc90000651030: ir_set.erst_base = @3796b000 [ 0.548239] xhci_hcd 0000:03:00.0: ffffc90000651038: ir_set.erst_dequeue = @37969400 [ 0.548240] xhci_hcd 0000:03:00.0: Finished xhci_run for USB2 roothub [ 0.548275] usb usb3: default language 0x0409 [ 0.548296] usb usb3: udev 1, busnum 3, minor = 256 [ 0.548298] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.548340] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.548430] usb usb3: Product: xHCI Host Controller [ 0.548481] usb usb3: Manufacturer: Linux 3.11.0-rc6-next20130821-1-iniza-small xhci_hcd [ 0.548545] usb usb3: SerialNumber: 0000:03:00.0 [ 0.548727] usb usb3: usb_probe_device [ 0.548730] usb usb3: configuration #1 chosen from 1 choice [ 0.548734] xHCI xhci_add_endpoint called for root hub [ 0.548735] xHCI xhci_check_bandwidth called for root hub [ 0.548746] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.548776] hub 3-0:1.0: usb_probe_interface [ 0.548778] hub 3-0:1.0: usb_probe_interface - got id [ 0.548780] hub 3-0:1.0: USB hub found [ 0.548829] hub 3-0:1.0: 2 ports detected [ 0.548865] hub 3-0:1.0: standalone hub [ 0.548866] hub 3-0:1.0: no power switching (usb 1.0) [ 0.548868] hub 3-0:1.0: individual port over-current protection [ 0.548869] hub 3-0:1.0: Single TT [ 0.548871] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.548872] hub 3-0:1.0: power on to power good time: 20ms [ 0.548884] hub 3-0:1.0: local power source is good [ 0.548920] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.548928] xhci_hcd 0000:03:00.0: set port power, actual port 0 status = 0x2a0 [ 0.548940] xhci_hcd 0000:03:00.0: set port power, actual port 1 status = 0x2a0 [ 0.549000] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.549041] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.549099] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.549103] xhci_hcd 0000:03:00.0: // Turn on HC, cmd = 0x5. [ 0.549113] xhci_hcd 0000:03:00.0: Finished xhci_run for USB3 roothub [ 0.549151] usb usb4: skipped 1 descriptor after endpoint [ 0.549159] usb usb4: default language 0x0409 [ 0.549178] usb usb4: udev 1, busnum 4, minor = 384 [ 0.549180] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.549220] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.549271] usb usb4: Product: xHCI Host Controller [ 0.549308] usb usb4: Manufacturer: Linux 3.11.0-rc6-next20130821-1-iniza-small xhci_hcd [ 0.549361] usb usb4: SerialNumber: 0000:03:00.0 [ 0.549536] usb usb4: usb_probe_device [ 0.549538] usb usb4: configuration #1 chosen from 1 choice [ 0.549542] xHCI xhci_add_endpoint called for root hub [ 0.549543] xHCI xhci_check_bandwidth called for root hub [ 0.549552] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.549577] hub 4-0:1.0: usb_probe_interface [ 0.549579] hub 4-0:1.0: usb_probe_interface - got id [ 0.549581] hub 4-0:1.0: USB hub found [ 0.549627] hub 4-0:1.0: 2 ports detected [ 0.549662] hub 4-0:1.0: standalone hub [ 0.549663] hub 4-0:1.0: no power switching (usb 1.0) [ 0.549665] hub 4-0:1.0: individual port over-current protection [ 0.549666] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.549667] hub 4-0:1.0: power on to power good time: 20ms [ 0.549677] hub 4-0:1.0: local power source is good [ 0.549709] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.549716] xhci_hcd 0000:03:00.0: set port power, actual port 0 status = 0x2a0 [ 0.549729] xhci_hcd 0000:03:00.0: set port power, actual port 1 status = 0x2a0 [ 0.560455] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.566768] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.566809] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.567123] mousedev: PS/2 mouse device common for all mice [ 0.567813] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.567886] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.568012] device-mapper: uevent: version 1.0.3 [ 0.568152] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat•com [ 0.568214] Intel P-state driver initializing. [ 0.568262] Intel pstate controlling: cpu 0 [ 0.568337] Intel pstate controlling: cpu 1 [ 0.568439] Intel pstate controlling: cpu 2 [ 0.568502] Intel pstate controlling: cpu 3 [ 0.568616] ledtrig-cpu: registered to indicate activity on CPUs [ 0.569007] ashmem: initialized [ 0.569252] TCP: cubic registered [ 0.569514] NET: Registered protocol family 10 [ 0.570121] NET: Registered protocol family 17 [ 0.570180] Key type dns_resolver registered [ 0.570723] PM: Hibernation image not present or could not be loaded. [ 0.570729] Loading module verification certificates [ 0.571859] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 2cc6cde21be0bdd4ba50309970aed567d305e6c9' [ 0.571947] registered taskstats version 1 [ 0.575843] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.575913] Key type trusted registered [ 0.583543] Key type encrypted registered [ 0.590852] AppArmor: AppArmor sha1 policy hashing enabled [ 0.591572] rtc_cmos 00:05: setting system clock to 2013-08-22 13:06:52 UTC (1377176812) [ 0.592071] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.592114] EDD information not available. [ 0.620438] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.620485] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.636447] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.636470] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.648442] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 0.648449] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 0.648475] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 0.648478] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 0.648500] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2e0 [ 0.648503] xhci_hcd 0000:03:00.0: Get port status returned 0x2e0 [ 0.648517] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 0.648519] xhci_hcd 0000:03:00.0: Get port status returned 0x2a0 [ 0.648545] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.648562] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.648586] hub 3-0:1.0: hub_suspend [ 0.648646] usb usb3: bus auto-suspend, wakeup 1 [ 0.648667] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 0.648692] xhci_hcd 0000:03:00.0: set port remote wake mask, actual port 0 status = 0xe0002e0 [ 0.648730] xhci_hcd 0000:03:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 0.648753] hub 4-0:1.0: hub_suspend [ 0.648770] usb usb4: bus auto-suspend, wakeup 1 [ 0.648783] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 0.657164] xhci_hcd 0000:03:00.0: Port Status Change Event for port 1 [ 0.657186] xhci_hcd 0000:03:00.0: resume root hub [ 0.657198] xhci_hcd 0000:03:00.0: handle_port_status: starting port polling. [ 0.657235] usb usb4: usb wakeup-resume [ 0.657240] usb usb4: usb auto-resume [ 0.668423] hub 4-0:1.0: hub_resume [ 0.668446] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x21203 [ 0.668451] xhci_hcd 0000:03:00.0: Get port status returned 0x10203 [ 0.668476] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.668489] xhci_hcd 0000:03:00.0: clear port connect change, actual port 0 status = 0x1203 [ 0.668505] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 0.668509] xhci_hcd 0000:03:00.0: Get port status returned 0x2a0 [ 0.720452] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.720561] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.776306] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 0.776632] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.776643] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.820318] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.821584] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.821660] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.823109] ata1.00: configured for UDMA/133 [ 0.823635] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.824263] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.824346] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.824444] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.824962] sd 0:0:0:0: [sda] Write Protect is off [ 0.825034] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.825271] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.832276] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.839044] sda: sda1 sda2 sda3 [ 0.840017] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.888556] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.888569] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.964539] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.964550] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.965181] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.965619] usb 1-1: usb_probe_device [ 0.965628] usb 1-1: configuration #1 chosen from 1 choice [ 0.965877] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.965967] hub 1-1:1.0: usb_probe_interface [ 0.965973] hub 1-1:1.0: usb_probe_interface - got id [ 0.965980] hub 1-1:1.0: USB hub found [ 0.966211] hub 1-1:1.0: 6 ports detected [ 0.966279] hub 1-1:1.0: standalone hub [ 0.966283] hub 1-1:1.0: individual port power switching [ 0.966287] hub 1-1:1.0: individual port over-current protection [ 0.966290] hub 1-1:1.0: Single TT [ 0.966294] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.966298] hub 1-1:1.0: power on to power good time: 100ms [ 0.966564] hub 1-1:1.0: local power source is good [ 0.967067] hub 1-1:1.0: enabling power on all ports [ 0.968408] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.968443] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.024463] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.024478] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.068403] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.069149] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.080107] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.136382] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.136398] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.144096] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.144761] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.144840] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.145583] ata2.00: configured for UDMA/133 [ 1.146116] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.146636] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.146692] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.147057] sd 1:0:0:0: [sdb] Write Protect is off [ 1.147127] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.147184] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.148613] sdb: sdb1 sdb2 [ 1.149814] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.168063] usb 1-1: link qh256-0001/ffff880037a3f240 start 1 [1/0 us] [ 1.212831] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.212842] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.212917] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.213341] usb 2-1: usb_probe_device [ 1.213351] usb 2-1: configuration #1 chosen from 1 choice [ 1.213582] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.213666] hub 2-1:1.0: usb_probe_interface [ 1.213672] hub 2-1:1.0: usb_probe_interface - got id [ 1.213679] hub 2-1:1.0: USB hub found [ 1.213907] hub 2-1:1.0: 6 ports detected [ 1.213978] hub 2-1:1.0: standalone hub [ 1.213982] hub 2-1:1.0: individual port power switching [ 1.213986] hub 2-1:1.0: individual port over-current protection [ 1.213989] hub 2-1:1.0: Single TT [ 1.213993] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.213997] hub 2-1:1.0: power on to power good time: 100ms [ 1.214260] hub 2-1:1.0: local power source is good [ 1.214914] hub 2-1:1.0: enabling power on all ports [ 1.216278] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.216299] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x1203 [ 1.216304] xhci_hcd 0000:03:00.0: Get port status returned 0x203 [ 1.216327] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.216342] xhci_hcd 0000:03:00.0: // Ding dong! [ 1.216546] xhci_hcd 0000:03:00.0: Slot 1 output ctx = 0x37a62000 (dma) [ 1.216565] xhci_hcd 0000:03:00.0: Slot 1 input ctx = 0x37a66000 (dma) [ 1.216588] xhci_hcd 0000:03:00.0: Set slot id 1 dcbaa entry ffff880037968008 to 0x37a62000 [ 1.216604] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x1203 [ 1.216608] xhci_hcd 0000:03:00.0: Get port status returned 0x203 [ 1.216632] xhci_hcd 0000:03:00.0: set port reset, actual port 0 status = 0x1211 [ 1.216643] xhci_hcd 0000:03:00.0: Port Status Change Event for port 1 [ 1.216649] xhci_hcd 0000:03:00.0: handle_port_status: starting port polling. [ 1.272007] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x201203 [ 1.272017] xhci_hcd 0000:03:00.0: Get port status returned 0x100203 [ 1.316978] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.327957] xhci_hcd 0000:03:00.0: clear port reset change, actual port 0 status = 0x1203 [ 1.328000] xhci_hcd 0000:03:00.0: clear port warm(BH) reset change, actual port 0 status = 0x1203 [ 1.328024] xhci_hcd 0000:03:00.0: clear port link state change, actual port 0 status = 0x1203 [ 1.328045] xhci_hcd 0000:03:00.0: clear port connect change, actual port 0 status = 0x1203 [ 1.328068] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x1203 [ 1.328073] xhci_hcd 0000:03:00.0: Get port status returned 0x203 [ 1.328089] xhci_hcd 0000:03:00.0: Set root hub portnum to 1 [ 1.328093] xhci_hcd 0000:03:00.0: Set fake root hub portnum to 1 [ 1.328097] xhci_hcd 0000:03:00.0: udev->tt = (null) [ 1.328100] xhci_hcd 0000:03:00.0: udev->ttport = 0x0 [ 1.328104] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 1.328110] xhci_hcd 0000:03:00.0: @ffff880037a66000 (virt) @37a66000 (dma) 0x000000 - drop flags [ 1.328115] xhci_hcd 0000:03:00.0: @ffff880037a66004 (virt) @37a66004 (dma) 0x000003 - add flags [ 1.328119] xhci_hcd 0000:03:00.0: @ffff880037a66008 (virt) @37a66008 (dma) 0x000000 - rsvd2[0] [ 1.328124] xhci_hcd 0000:03:00.0: @ffff880037a6600c (virt) @37a6600c (dma) 0x000000 - rsvd2[1] [ 1.328128] xhci_hcd 0000:03:00.0: @ffff880037a66010 (virt) @37a66010 (dma) 0x000000 - rsvd2[2] [ 1.328132] xhci_hcd 0000:03:00.0: @ffff880037a66014 (virt) @37a66014 (dma) 0x000000 - rsvd2[3] [ 1.328136] xhci_hcd 0000:03:00.0: @ffff880037a66018 (virt) @37a66018 (dma) 0x000000 - rsvd2[4] [ 1.328140] xhci_hcd 0000:03:00.0: @ffff880037a6601c (virt) @37a6601c (dma) 0x000000 - rsvd2[5] [ 1.328144] xhci_hcd 0000:03:00.0: Slot Context: [ 1.328148] xhci_hcd 0000:03:00.0: @ffff880037a66020 (virt) @37a66020 (dma) 0x8400000 - dev_info [ 1.328152] xhci_hcd 0000:03:00.0: @ffff880037a66024 (virt) @37a66024 (dma) 0x010000 - dev_info2 [ 1.328156] xhci_hcd 0000:03:00.0: @ffff880037a66028 (virt) @37a66028 (dma) 0x000000 - tt_info [ 1.328160] xhci_hcd 0000:03:00.0: @ffff880037a6602c (virt) @37a6602c (dma) 0x000000 - dev_state [ 1.328164] xhci_hcd 0000:03:00.0: @ffff880037a66030 (virt) @37a66030 (dma) 0x000000 - rsvd[0] [ 1.328168] xhci_hcd 0000:03:00.0: @ffff880037a66034 (virt) @37a66034 (dma) 0x000000 - rsvd[1] [ 1.328172] xhci_hcd 0000:03:00.0: @ffff880037a66038 (virt) @37a66038 (dma) 0x000000 - rsvd[2] [ 1.328176] xhci_hcd 0000:03:00.0: @ffff880037a6603c (virt) @37a6603c (dma) 0x000000 - rsvd[3] [ 1.328181] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.328185] xhci_hcd 0000:03:00.0: @ffff880037a66040 (virt) @37a66040 (dma) 0x000000 - ep_info [ 1.328189] xhci_hcd 0000:03:00.0: @ffff880037a66044 (virt) @37a66044 (dma) 0x2000026 - ep_info2 [ 1.328193] xhci_hcd 0000:03:00.0: @ffff880037a66048 (virt) @37a66048 (dma) 0x37969801 - deq [ 1.328197] xhci_hcd 0000:03:00.0: @ffff880037a66050 (virt) @37a66050 (dma) 0x000000 - tx_info [ 1.328201] xhci_hcd 0000:03:00.0: @ffff880037a66054 (virt) @37a66054 (dma) 0x000000 - rsvd[0] [ 1.328205] xhci_hcd 0000:03:00.0: @ffff880037a66058 (virt) @37a66058 (dma) 0x000000 - rsvd[1] [ 1.328209] xhci_hcd 0000:03:00.0: @ffff880037a6605c (virt) @37a6605c (dma) 0x000000 - rsvd[2] [ 1.328214] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.328218] xhci_hcd 0000:03:00.0: @ffff880037a66060 (virt) @37a66060 (dma) 0x000000 - ep_info [ 1.328221] xhci_hcd 0000:03:00.0: @ffff880037a66064 (virt) @37a66064 (dma) 0x000000 - ep_info2 [ 1.328226] xhci_hcd 0000:03:00.0: @ffff880037a66068 (virt) @37a66068 (dma) 0x000000 - deq [ 1.328229] xhci_hcd 0000:03:00.0: @ffff880037a66070 (virt) @37a66070 (dma) 0x000000 - tx_info [ 1.328234] xhci_hcd 0000:03:00.0: @ffff880037a66074 (virt) @37a66074 (dma) 0x000000 - rsvd[0] [ 1.328238] xhci_hcd 0000:03:00.0: @ffff880037a66078 (virt) @37a66078 (dma) 0x000000 - rsvd[1] [ 1.328242] xhci_hcd 0000:03:00.0: @ffff880037a6607c (virt) @37a6607c (dma) 0x000000 - rsvd[2] [ 1.328246] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.328250] xhci_hcd 0000:03:00.0: @ffff880037a66080 (virt) @37a66080 (dma) 0x000000 - ep_info [ 1.328254] xhci_hcd 0000:03:00.0: @ffff880037a66084 (virt) @37a66084 (dma) 0x000000 - ep_info2 [ 1.328258] xhci_hcd 0000:03:00.0: @ffff880037a66088 (virt) @37a66088 (dma) 0x000000 - deq [ 1.328262] xhci_hcd 0000:03:00.0: @ffff880037a66090 (virt) @37a66090 (dma) 0x000000 - tx_info [ 1.328266] xhci_hcd 0000:03:00.0: @ffff880037a66094 (virt) @37a66094 (dma) 0x000000 - rsvd[0] [ 1.328270] xhci_hcd 0000:03:00.0: @ffff880037a66098 (virt) @37a66098 (dma) 0x000000 - rsvd[1] [ 1.328274] xhci_hcd 0000:03:00.0: @ffff880037a6609c (virt) @37a6609c (dma) 0x000000 - rsvd[2] [ 1.328279] xhci_hcd 0000:03:00.0: // Ding dong! [ 1.331818] xhci_hcd 0000:03:00.0: Successful Address Device command [ 1.331861] xhci_hcd 0000:03:00.0: Op regs DCBAA ptr = 0x00000037968000 [ 1.331868] xhci_hcd 0000:03:00.0: Slot ID 1 dcbaa entry @ffff880037968008 = 0x00000037a62000 [ 1.331873] xhci_hcd 0000:03:00.0: Output Context DMA address = 0x37a62000 [ 1.331877] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 1.331883] xhci_hcd 0000:03:00.0: @ffff880037a66000 (virt) @37a66000 (dma) 0x000000 - drop flags [ 1.331887] xhci_hcd 0000:03:00.0: @ffff880037a66004 (virt) @37a66004 (dma) 0x000003 - add flags [ 1.331892] xhci_hcd 0000:03:00.0: @ffff880037a66008 (virt) @37a66008 (dma) 0x000000 - rsvd2[0] [ 1.331896] xhci_hcd 0000:03:00.0: @ffff880037a6600c (virt) @37a6600c (dma) 0x000000 - rsvd2[1] [ 1.331900] xhci_hcd 0000:03:00.0: @ffff880037a66010 (virt) @37a66010 (dma) 0x000000 - rsvd2[2] [ 1.331904] xhci_hcd 0000:03:00.0: @ffff880037a66014 (virt) @37a66014 (dma) 0x000000 - rsvd2[3] [ 1.331908] xhci_hcd 0000:03:00.0: @ffff880037a66018 (virt) @37a66018 (dma) 0x000000 - rsvd2[4] [ 1.331912] xhci_hcd 0000:03:00.0: @ffff880037a6601c (virt) @37a6601c (dma) 0x000000 - rsvd2[5] [ 1.331916] xhci_hcd 0000:03:00.0: Slot Context: [ 1.331920] xhci_hcd 0000:03:00.0: @ffff880037a66020 (virt) @37a66020 (dma) 0x8400000 - dev_info [ 1.331924] xhci_hcd 0000:03:00.0: @ffff880037a66024 (virt) @37a66024 (dma) 0x010000 - dev_info2 [ 1.331928] xhci_hcd 0000:03:00.0: @ffff880037a66028 (virt) @37a66028 (dma) 0x000000 - tt_info [ 1.331932] xhci_hcd 0000:03:00.0: @ffff880037a6602c (virt) @37a6602c (dma) 0x000000 - dev_state [ 1.331936] xhci_hcd 0000:03:00.0: @ffff880037a66030 (virt) @37a66030 (dma) 0x000000 - rsvd[0] [ 1.331941] xhci_hcd 0000:03:00.0: @ffff880037a66034 (virt) @37a66034 (dma) 0x000000 - rsvd[1] [ 1.331945] xhci_hcd 0000:03:00.0: @ffff880037a66038 (virt) @37a66038 (dma) 0x000000 - rsvd[2] [ 1.331949] xhci_hcd 0000:03:00.0: @ffff880037a6603c (virt) @37a6603c (dma) 0x000000 - rsvd[3] [ 1.331953] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.331958] xhci_hcd 0000:03:00.0: @ffff880037a66040 (virt) @37a66040 (dma) 0x000000 - ep_info [ 1.331962] xhci_hcd 0000:03:00.0: @ffff880037a66044 (virt) @37a66044 (dma) 0x2000026 - ep_info2 [ 1.331966] xhci_hcd 0000:03:00.0: @ffff880037a66048 (virt) @37a66048 (dma) 0x37969801 - deq [ 1.331970] xhci_hcd 0000:03:00.0: @ffff880037a66050 (virt) @37a66050 (dma) 0x000000 - tx_info [ 1.331974] xhci_hcd 0000:03:00.0: @ffff880037a66054 (virt) @37a66054 (dma) 0x000000 - rsvd[0] [ 1.331978] xhci_hcd 0000:03:00.0: @ffff880037a66058 (virt) @37a66058 (dma) 0x000000 - rsvd[1] [ 1.331982] xhci_hcd 0000:03:00.0: @ffff880037a6605c (virt) @37a6605c (dma) 0x000000 - rsvd[2] [ 1.331987] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.331991] xhci_hcd 0000:03:00.0: @ffff880037a66060 (virt) @37a66060 (dma) 0x000000 - ep_info [ 1.331995] xhci_hcd 0000:03:00.0: @ffff880037a66064 (virt) @37a66064 (dma) 0x000000 - ep_info2 [ 1.331999] xhci_hcd 0000:03:00.0: @ffff880037a66068 (virt) @37a66068 (dma) 0x000000 - deq [ 1.332003] xhci_hcd 0000:03:00.0: @ffff880037a66070 (virt) @37a66070 (dma) 0x000000 - tx_info [ 1.332007] xhci_hcd 0000:03:00.0: @ffff880037a66074 (virt) @37a66074 (dma) 0x000000 - rsvd[0] [ 1.332011] xhci_hcd 0000:03:00.0: @ffff880037a66078 (virt) @37a66078 (dma) 0x000000 - rsvd[1] [ 1.332016] xhci_hcd 0000:03:00.0: @ffff880037a6607c (virt) @37a6607c (dma) 0x000000 - rsvd[2] [ 1.332020] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.332024] xhci_hcd 0000:03:00.0: @ffff880037a66080 (virt) @37a66080 (dma) 0x000000 - ep_info [ 1.332028] xhci_hcd 0000:03:00.0: @ffff880037a66084 (virt) @37a66084 (dma) 0x000000 - ep_info2 [ 1.332032] xhci_hcd 0000:03:00.0: @ffff880037a66088 (virt) @37a66088 (dma) 0x000000 - deq [ 1.332036] xhci_hcd 0000:03:00.0: @ffff880037a66090 (virt) @37a66090 (dma) 0x000000 - tx_info [ 1.332040] xhci_hcd 0000:03:00.0: @ffff880037a66094 (virt) @37a66094 (dma) 0x000000 - rsvd[0] [ 1.332044] xhci_hcd 0000:03:00.0: @ffff880037a66098 (virt) @37a66098 (dma) 0x000000 - rsvd[1] [ 1.332048] xhci_hcd 0000:03:00.0: @ffff880037a6609c (virt) @37a6609c (dma) 0x000000 - rsvd[2] [ 1.332051] xhci_hcd 0000:03:00.0: Slot ID 1 Output Context: [ 1.332055] xhci_hcd 0000:03:00.0: Slot Context: [ 1.332058] xhci_hcd 0000:03:00.0: @ffff880037a62000 (virt) @37a62000 (dma) 0x8400000 - dev_info [ 1.332062] xhci_hcd 0000:03:00.0: @ffff880037a62004 (virt) @37a62004 (dma) 0x010000 - dev_info2 [ 1.332066] xhci_hcd 0000:03:00.0: @ffff880037a62008 (virt) @37a62008 (dma) 0x000000 - tt_info [ 1.332071] xhci_hcd 0000:03:00.0: @ffff880037a6200c (virt) @37a6200c (dma) 0x10000001 - dev_state [ 1.332075] xhci_hcd 0000:03:00.0: @ffff880037a62010 (virt) @37a62010 (dma) 0x000000 - rsvd[0] [ 1.332079] xhci_hcd 0000:03:00.0: @ffff880037a62014 (virt) @37a62014 (dma) 0x000000 - rsvd[1] [ 1.332083] xhci_hcd 0000:03:00.0: @ffff880037a62018 (virt) @37a62018 (dma) 0x000000 - rsvd[2] [ 1.332087] xhci_hcd 0000:03:00.0: @ffff880037a6201c (virt) @37a6201c (dma) 0x000000 - rsvd[3] [ 1.332090] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.332094] xhci_hcd 0000:03:00.0: @ffff880037a62020 (virt) @37a62020 (dma) 0x000001 - ep_info [ 1.332098] xhci_hcd 0000:03:00.0: @ffff880037a62024 (virt) @37a62024 (dma) 0x2000026 - ep_info2 [ 1.332102] xhci_hcd 0000:03:00.0: @ffff880037a62028 (virt) @37a62028 (dma) 0x37969801 - deq [ 1.332106] xhci_hcd 0000:03:00.0: @ffff880037a62030 (virt) @37a62030 (dma) 0x000000 - tx_info [ 1.332110] xhci_hcd 0000:03:00.0: @ffff880037a62034 (virt) @37a62034 (dma) 0x008004 - rsvd[0] [ 1.332115] xhci_hcd 0000:03:00.0: @ffff880037a62038 (virt) @37a62038 (dma) 0x030000 - rsvd[1] [ 1.332119] xhci_hcd 0000:03:00.0: @ffff880037a6203c (virt) @37a6203c (dma) 0x000008 - rsvd[2] [ 1.332122] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.332126] xhci_hcd 0000:03:00.0: @ffff880037a62040 (virt) @37a62040 (dma) 0x000000 - ep_info [ 1.332130] xhci_hcd 0000:03:00.0: @ffff880037a62044 (virt) @37a62044 (dma) 0x000000 - ep_info2 [ 1.332134] xhci_hcd 0000:03:00.0: @ffff880037a62048 (virt) @37a62048 (dma) 0x000000 - deq [ 1.332138] xhci_hcd 0000:03:00.0: @ffff880037a62050 (virt) @37a62050 (dma) 0x000000 - tx_info [ 1.332142] xhci_hcd 0000:03:00.0: @ffff880037a62054 (virt) @37a62054 (dma) 0x000000 - rsvd[0] [ 1.332146] xhci_hcd 0000:03:00.0: @ffff880037a62058 (virt) @37a62058 (dma) 0x000000 - rsvd[1] [ 1.332150] xhci_hcd 0000:03:00.0: @ffff880037a6205c (virt) @37a6205c (dma) 0x000000 - rsvd[2] [ 1.332154] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.332158] xhci_hcd 0000:03:00.0: @ffff880037a62060 (virt) @37a62060 (dma) 0x000000 - ep_info [ 1.332162] xhci_hcd 0000:03:00.0: @ffff880037a62064 (virt) @37a62064 (dma) 0x000000 - ep_info2 [ 1.332166] xhci_hcd 0000:03:00.0: @ffff880037a62068 (virt) @37a62068 (dma) 0x000000 - deq [ 1.332169] xhci_hcd 0000:03:00.0: @ffff880037a62070 (virt) @37a62070 (dma) 0x000000 - tx_info [ 1.332174] xhci_hcd 0000:03:00.0: @ffff880037a62074 (virt) @37a62074 (dma) 0x000000 - rsvd[0] [ 1.332178] xhci_hcd 0000:03:00.0: @ffff880037a62078 (virt) @37a62078 (dma) 0x000000 - rsvd[1] [ 1.332182] xhci_hcd 0000:03:00.0: @ffff880037a6207c (virt) @37a6207c (dma) 0x000000 - rsvd[2] [ 1.332186] xhci_hcd 0000:03:00.0: Internal device address = 2 [ 1.332194] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.348534] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.348982] usb 4-1: skipped 1 descriptor after endpoint [ 1.348990] usb 4-1: skipped 1 descriptor after endpoint [ 1.349045] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.349070] usb 4-1: default language 0x0409 [ 1.349173] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.349319] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.349460] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.349519] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.349525] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.349600] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.349673] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.349740] usb 4-1: Manufacturer: MEDION [ 1.349804] usb 4-1: SerialNumber: 3180000000000000092C [ 1.350238] usb 4-1: usb_probe_device [ 1.350248] usb 4-1: configuration #1 chosen from 1 choice [ 1.350284] xhci_hcd 0000:03:00.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8, new slot info = 0x18400000 [ 1.350304] xhci_hcd 0000:03:00.0: add ep 0x2, slot id 1, new drop flags = 0x0, new add flags = 0x18, new slot info = 0x20400000 [ 1.350309] xhci_hcd 0000:03:00.0: xhci_check_bandwidth called for udev ffff88011844e000 [ 1.350313] xhci_hcd 0000:03:00.0: New Input Control Context: [ 1.350318] xhci_hcd 0000:03:00.0: @ffff880037a66000 (virt) @37a66000 (dma) 0x000000 - drop flags [ 1.350323] xhci_hcd 0000:03:00.0: @ffff880037a66004 (virt) @37a66004 (dma) 0x000019 - add flags [ 1.350328] xhci_hcd 0000:03:00.0: @ffff880037a66008 (virt) @37a66008 (dma) 0x000000 - rsvd2[0] [ 1.350332] xhci_hcd 0000:03:00.0: @ffff880037a6600c (virt) @37a6600c (dma) 0x000000 - rsvd2[1] [ 1.350336] xhci_hcd 0000:03:00.0: @ffff880037a66010 (virt) @37a66010 (dma) 0x000000 - rsvd2[2] [ 1.350340] xhci_hcd 0000:03:00.0: @ffff880037a66014 (virt) @37a66014 (dma) 0x000000 - rsvd2[3] [ 1.350344] xhci_hcd 0000:03:00.0: @ffff880037a66018 (virt) @37a66018 (dma) 0x000000 - rsvd2[4] [ 1.350348] xhci_hcd 0000:03:00.0: @ffff880037a6601c (virt) @37a6601c (dma) 0x000000 - rsvd2[5] [ 1.350352] xhci_hcd 0000:03:00.0: Slot Context: [ 1.350356] xhci_hcd 0000:03:00.0: @ffff880037a66020 (virt) @37a66020 (dma) 0x20400000 - dev_info [ 1.350360] xhci_hcd 0000:03:00.0: @ffff880037a66024 (virt) @37a66024 (dma) 0x010000 - dev_info2 [ 1.350364] xhci_hcd 0000:03:00.0: @ffff880037a66028 (virt) @37a66028 (dma) 0x000000 - tt_info [ 1.350368] xhci_hcd 0000:03:00.0: @ffff880037a6602c (virt) @37a6602c (dma) 0x000000 - dev_state [ 1.350372] xhci_hcd 0000:03:00.0: @ffff880037a66030 (virt) @37a66030 (dma) 0x000000 - rsvd[0] [ 1.350377] xhci_hcd 0000:03:00.0: @ffff880037a66034 (virt) @37a66034 (dma) 0x000000 - rsvd[1] [ 1.350381] xhci_hcd 0000:03:00.0: @ffff880037a66038 (virt) @37a66038 (dma) 0x000000 - rsvd[2] [ 1.350385] xhci_hcd 0000:03:00.0: @ffff880037a6603c (virt) @37a6603c (dma) 0x000000 - rsvd[3] [ 1.350389] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.350393] xhci_hcd 0000:03:00.0: @ffff880037a66040 (virt) @37a66040 (dma) 0x000000 - ep_info [ 1.350397] xhci_hcd 0000:03:00.0: @ffff880037a66044 (virt) @37a66044 (dma) 0x2000026 - ep_info2 [ 1.350401] xhci_hcd 0000:03:00.0: @ffff880037a66048 (virt) @37a66048 (dma) 0x37969801 - deq [ 1.350405] xhci_hcd 0000:03:00.0: @ffff880037a66050 (virt) @37a66050 (dma) 0x000000 - tx_info [ 1.350409] xhci_hcd 0000:03:00.0: @ffff880037a66054 (virt) @37a66054 (dma) 0x000000 - rsvd[0] [ 1.350414] xhci_hcd 0000:03:00.0: @ffff880037a66058 (virt) @37a66058 (dma) 0x000000 - rsvd[1] [ 1.350418] xhci_hcd 0000:03:00.0: @ffff880037a6605c (virt) @37a6605c (dma) 0x000000 - rsvd[2] [ 1.350422] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.350426] xhci_hcd 0000:03:00.0: @ffff880037a66060 (virt) @37a66060 (dma) 0x000000 - ep_info [ 1.350430] xhci_hcd 0000:03:00.0: @ffff880037a66064 (virt) @37a66064 (dma) 0x000000 - ep_info2 [ 1.350434] xhci_hcd 0000:03:00.0: @ffff880037a66068 (virt) @37a66068 (dma) 0x000000 - deq [ 1.350438] xhci_hcd 0000:03:00.0: @ffff880037a66070 (virt) @37a66070 (dma) 0x000000 - tx_info [ 1.350442] xhci_hcd 0000:03:00.0: @ffff880037a66074 (virt) @37a66074 (dma) 0x000000 - rsvd[0] [ 1.350446] xhci_hcd 0000:03:00.0: @ffff880037a66078 (virt) @37a66078 (dma) 0x000000 - rsvd[1] [ 1.350450] xhci_hcd 0000:03:00.0: @ffff880037a6607c (virt) @37a6607c (dma) 0x000000 - rsvd[2] [ 1.350454] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.350458] xhci_hcd 0000:03:00.0: @ffff880037a66080 (virt) @37a66080 (dma) 0x000000 - ep_info [ 1.350462] xhci_hcd 0000:03:00.0: @ffff880037a66084 (virt) @37a66084 (dma) 0x4000f36 - ep_info2 [ 1.350465] xhci_hcd 0000:03:00.0: @ffff880037a66088 (virt) @37a66088 (dma) 0x37a67401 - deq [ 1.350469] xhci_hcd 0000:03:00.0: @ffff880037a66090 (virt) @37a66090 (dma) 0x000000 - tx_info [ 1.350473] xhci_hcd 0000:03:00.0: @ffff880037a66094 (virt) @37a66094 (dma) 0x000000 - rsvd[0] [ 1.350477] xhci_hcd 0000:03:00.0: @ffff880037a66098 (virt) @37a66098 (dma) 0x000000 - rsvd[1] [ 1.350482] xhci_hcd 0000:03:00.0: @ffff880037a6609c (virt) @37a6609c (dma) 0x000000 - rsvd[2] [ 1.350485] xhci_hcd 0000:03:00.0: OUT Endpoint 02 Context (ep_index 03): [ 1.350489] xhci_hcd 0000:03:00.0: @ffff880037a660a0 (virt) @37a660a0 (dma) 0x000000 - ep_info [ 1.350493] xhci_hcd 0000:03:00.0: @ffff880037a660a4 (virt) @37a660a4 (dma) 0x4000f16 - ep_info2 [ 1.350497] xhci_hcd 0000:03:00.0: @ffff880037a660a8 (virt) @37a660a8 (dma) 0x37a70001 - deq [ 1.350501] xhci_hcd 0000:03:00.0: @ffff880037a660b0 (virt) @37a660b0 (dma) 0x000000 - tx_info [ 1.350505] xhci_hcd 0000:03:00.0: @ffff880037a660b4 (virt) @37a660b4 (dma) 0x000000 - rsvd[0] [ 1.350509] xhci_hcd 0000:03:00.0: @ffff880037a660b8 (virt) @37a660b8 (dma) 0x000000 - rsvd[1] [ 1.350513] xhci_hcd 0000:03:00.0: @ffff880037a660bc (virt) @37a660bc (dma) 0x000000 - rsvd[2] [ 1.350518] xhci_hcd 0000:03:00.0: // Ding dong! [ 1.351589] xhci_hcd 0000:03:00.0: Completed config ep cmd [ 1.351641] xhci_hcd 0000:03:00.0: Successful Endpoint Configure command [ 1.351647] xhci_hcd 0000:03:00.0: Output context after successful config ep cmd: [ 1.351651] xhci_hcd 0000:03:00.0: Slot Context: [ 1.351657] xhci_hcd 0000:03:00.0: @ffff880037a62000 (virt) @37a62000 (dma) 0x20400000 - dev_info [ 1.351662] xhci_hcd 0000:03:00.0: @ffff880037a62004 (virt) @37a62004 (dma) 0x010000 - dev_info2 [ 1.351666] xhci_hcd 0000:03:00.0: @ffff880037a62008 (virt) @37a62008 (dma) 0x000000 - tt_info [ 1.351670] xhci_hcd 0000:03:00.0: @ffff880037a6200c (virt) @37a6200c (dma) 0x18000001 - dev_state [ 1.351675] xhci_hcd 0000:03:00.0: @ffff880037a62010 (virt) @37a62010 (dma) 0x000000 - rsvd[0] [ 1.351679] xhci_hcd 0000:03:00.0: @ffff880037a62014 (virt) @37a62014 (dma) 0x000000 - rsvd[1] [ 1.351683] xhci_hcd 0000:03:00.0: @ffff880037a62018 (virt) @37a62018 (dma) 0x000000 - rsvd[2] [ 1.351687] xhci_hcd 0000:03:00.0: @ffff880037a6201c (virt) @37a6201c (dma) 0x000000 - rsvd[3] [ 1.351692] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.351696] xhci_hcd 0000:03:00.0: @ffff880037a62020 (virt) @37a62020 (dma) 0x000001 - ep_info [ 1.351700] xhci_hcd 0000:03:00.0: @ffff880037a62024 (virt) @37a62024 (dma) 0x2000026 - ep_info2 [ 1.351704] xhci_hcd 0000:03:00.0: @ffff880037a62028 (virt) @37a62028 (dma) 0x379699e1 - deq [ 1.351708] xhci_hcd 0000:03:00.0: @ffff880037a62030 (virt) @37a62030 (dma) 0x000000 - tx_info [ 1.351713] xhci_hcd 0000:03:00.0: @ffff880037a62034 (virt) @37a62034 (dma) 0x008004 - rsvd[0] [ 1.351717] xhci_hcd 0000:03:00.0: @ffff880037a62038 (virt) @37a62038 (dma) 0x030000 - rsvd[1] [ 1.351721] xhci_hcd 0000:03:00.0: @ffff880037a6203c (virt) @37a6203c (dma) 0x000000 - rsvd[2] [ 1.351725] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.351729] xhci_hcd 0000:03:00.0: @ffff880037a62040 (virt) @37a62040 (dma) 0x000000 - ep_info [ 1.351733] xhci_hcd 0000:03:00.0: @ffff880037a62044 (virt) @37a62044 (dma) 0x000000 - ep_info2 [ 1.351737] xhci_hcd 0000:03:00.0: @ffff880037a62048 (virt) @37a62048 (dma) 0x000000 - deq [ 1.351741] xhci_hcd 0000:03:00.0: @ffff880037a62050 (virt) @37a62050 (dma) 0x000000 - tx_info [ 1.351745] xhci_hcd 0000:03:00.0: @ffff880037a62054 (virt) @37a62054 (dma) 0x000000 - rsvd[0] [ 1.351750] xhci_hcd 0000:03:00.0: @ffff880037a62058 (virt) @37a62058 (dma) 0x000000 - rsvd[1] [ 1.351754] xhci_hcd 0000:03:00.0: @ffff880037a6205c (virt) @37a6205c (dma) 0x000000 - rsvd[2] [ 1.351758] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.351762] xhci_hcd 0000:03:00.0: @ffff880037a62060 (virt) @37a62060 (dma) 0x000001 - ep_info [ 1.351766] xhci_hcd 0000:03:00.0: @ffff880037a62064 (virt) @37a62064 (dma) 0x4000f36 - ep_info2 [ 1.351770] xhci_hcd 0000:03:00.0: @ffff880037a62068 (virt) @37a62068 (dma) 0x37a67401 - deq [ 1.351774] xhci_hcd 0000:03:00.0: @ffff880037a62070 (virt) @37a62070 (dma) 0x000000 - tx_info [ 1.351778] xhci_hcd 0000:03:00.0: @ffff880037a62074 (virt) @37a62074 (dma) 0x000002 - rsvd[0] [ 1.351782] xhci_hcd 0000:03:00.0: @ffff880037a62078 (virt) @37a62078 (dma) 0x030000 - rsvd[1] [ 1.351786] xhci_hcd 0000:03:00.0: @ffff880037a6207c (virt) @37a6207c (dma) 0x000000 - rsvd[2] [ 1.351790] xhci_hcd 0000:03:00.0: OUT Endpoint 02 Context (ep_index 03): [ 1.351794] xhci_hcd 0000:03:00.0: @ffff880037a62080 (virt) @37a62080 (dma) 0x000001 - ep_info [ 1.351797] xhci_hcd 0000:03:00.0: @ffff880037a62084 (virt) @37a62084 (dma) 0x4000f16 - ep_info2 [ 1.351801] xhci_hcd 0000:03:00.0: @ffff880037a62088 (virt) @37a62088 (dma) 0x37a70001 - deq [ 1.351830] xhci_hcd 0000:03:00.0: @ffff880037a62090 (virt) @37a62090 (dma) 0x000000 - tx_info [ 1.351834] xhci_hcd 0000:03:00.0: @ffff880037a62094 (virt) @37a62094 (dma) 0x000000 - rsvd[0] [ 1.351839] xhci_hcd 0000:03:00.0: @ffff880037a62098 (virt) @37a62098 (dma) 0x030000 - rsvd[1] [ 1.351843] xhci_hcd 0000:03:00.0: @ffff880037a6209c (virt) @37a6209c (dma) 0x000000 - rsvd[2] [ 1.351853] xhci_hcd 0000:03:00.0: Endpoint 0x81 not halted, refusing to reset. [ 1.351857] xhci_hcd 0000:03:00.0: Endpoint 0x2 not halted, refusing to reset. [ 1.351970] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.352218] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.352454] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.395867] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 1.403895] tsc: Refined TSC clocksource calibration: 1596.373 MHz [ 1.415911] usb 2-1: link qh256-0001/ffff880037a6b740 start 1 [1/0 us] [ 1.423974] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.463851] ata4: SATA link down (SStatus 0 SControl 300) [ 1.519234] usb 1-1.2: skipped 1 descriptor after interface [ 1.519710] usb 1-1.2: default language 0x0409 [ 1.522383] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.522395] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.522471] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.522559] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.522624] usb 1-1.2: Manufacturer: Logitech [ 1.523049] usb 1-1.2: usb_probe_device [ 1.523058] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.523662] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.524081] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.595856] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.783632] ata5: SATA link down (SStatus 0 SControl 300) [ 1.786879] Freeing unused kernel memory: 1328K (ffffffff81d09000 - ffffffff81e55000) [ 1.786973] Write protecting the kernel read-only data: 12288k [ 1.792494] Freeing unused kernel memory: 972K (ffff88000170d000 - ffff880001800000) [ 1.797357] Freeing unused kernel memory: 912K (ffff880001b1c000 - ffff880001c00000) [ 1.833427] usb 1-1.4: skipped 1 descriptor after configuration [ 1.833437] usb 1-1.4: skipped 5 descriptors after interface [ 1.833444] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.833449] usb 1-1.4: skipped 23 descriptors after interface [ 1.835544] usb 1-1.4: default language 0x0409 [ 1.837009] udevd[122]: starting version 175 [ 1.847531] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.847539] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.847611] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.847676] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.847724] usb 1-1.4: Manufacturer: 123 [ 1.847998] usb 1-1.4: usb_probe_device [ 1.848004] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.848241] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.967357] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.967591] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 1.968006] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.968459] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.968532] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.995636] usb-storage 4-1:1.0: usb_probe_interface [ 1.995648] usb-storage 4-1:1.0: usb_probe_interface - got id [ 1.995653] usb-storage 4-1:1.0: USB Mass Storage device detected [ 1.995853] scsi6 : usb-storage 4-1:1.0 [ 1.996163] usbcore: registered new interface driver usb-storage [ 2.020896] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.021019] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.021139] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.047998] hidraw: raw HID events driver (C) Jiri Kosina [ 2.051565] usbhid 1-1.2:1.0: usb_probe_interface [ 2.051570] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.054450] usbcore: registered new interface driver usbhid [ 2.054495] usbhid: USB HID core driver [ 2.063260] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.063637] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.091588] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.187796] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.187808] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.187887] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.188366] usb 2-1.5: usb_probe_device [ 2.188377] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.188915] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.189228] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.189600] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.403275] Switched to clocksource tsc [ 2.936070] EXT4-fs (loop0): INFO: recovery required on readonly filesystem [ 2.936134] EXT4-fs (loop0): write access will be enabled during recovery [ 2.995259] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 2.996062] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 2.996106] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.996207] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 2.996210] xhci_hcd 0000:03:00.0: Giveback URB ffff880037a79600, len = 68, expected = 192, status = -121 [ 2.996278] xhci_hcd 0000:03:00.0: Stalled endpoint [ 2.996285] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 2.996360] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 2.996367] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 2.996372] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 2.996377] xhci_hcd 0000:03:00.0: Finding endpoint context [ 2.996381] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 2.996386] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 2.996400] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 2.996404] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67470 (DMA) [ 2.996408] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 2.996415] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a67470 (0x37a67470 dma), new cycle = 1 [ 2.996420] xhci_hcd 0000:03:00.0: // Ding dong! [ 2.996430] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 2.996494] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 2.996567] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67471 [ 2.996656] sd 6:0:0:0: [sdc] Write Protect is off [ 2.996706] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 2.996808] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 2.996814] xhci_hcd 0000:03:00.0: Giveback URB ffff880037fe5cc0, len = 68, expected = 192, status = -121 [ 2.996894] xhci_hcd 0000:03:00.0: Stalled endpoint [ 2.996899] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 2.996965] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 2.996971] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 2.996974] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 2.996977] xhci_hcd 0000:03:00.0: Finding endpoint context [ 2.996990] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 2.996993] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 2.996996] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 2.996999] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a674a0 (DMA) [ 2.997002] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 2.997006] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a674a0 (0x37a674a0 dma), new cycle = 1 [ 2.997010] xhci_hcd 0000:03:00.0: // Ding dong! [ 2.997017] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 2.997089] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 2.997159] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a674a1 [ 2.997251] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.998907] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 2.998912] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11200, len = 68, expected = 192, status = -121 [ 2.998978] xhci_hcd 0000:03:00.0: Stalled endpoint [ 2.998982] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 2.999025] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 2.999030] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 2.999033] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 2.999036] xhci_hcd 0000:03:00.0: Finding endpoint context [ 2.999039] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 2.999042] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 2.999045] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 2.999049] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67500 (DMA) [ 2.999052] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 2.999057] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a67500 (0x37a67500 dma), new cycle = 1 [ 2.999061] xhci_hcd 0000:03:00.0: // Ding dong! [ 2.999068] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 2.999131] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 2.999203] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67501 [ 2.999372] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 2.999376] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b112c0, len = 68, expected = 192, status = -121 [ 2.999449] xhci_hcd 0000:03:00.0: Stalled endpoint [ 2.999454] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 2.999497] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 2.999502] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 2.999506] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 2.999509] xhci_hcd 0000:03:00.0: Finding endpoint context [ 2.999513] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 2.999516] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 2.999521] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 2.999526] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67530 (DMA) [ 2.999537] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 2.999542] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a67530 (0x37a67530 dma), new cycle = 1 [ 2.999546] xhci_hcd 0000:03:00.0: // Ding dong! [ 2.999553] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 2.999618] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 2.999689] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67531 [ 3.000199] sdc: sdc1 sdc2 sdc3 [ 3.001319] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.001325] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d3b69d40, len = 68, expected = 192, status = -121 [ 3.001397] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.001401] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 3.001452] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.001455] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.001458] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.001460] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.001463] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.001465] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.001468] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 3.001471] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a675e0 (DMA) [ 3.001473] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.001477] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a675e0 (0x37a675e0 dma), new cycle = 1 [ 3.001480] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.001486] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.001552] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.001626] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a675e1 [ 3.001801] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.001805] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d3b69c80, len = 68, expected = 192, status = -121 [ 3.001875] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.001878] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 3.001929] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.001932] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.001934] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.001937] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.001939] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.001942] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.001944] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 3.001947] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67610 (DMA) [ 3.001949] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.001953] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a67610 (0x37a67610 dma), new cycle = 1 [ 3.001956] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.001962] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.002027] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.002101] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67611 [ 3.002185] sd 6:0:0:0: [sdc] Attached SCSI disk [ 3.010372] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 96 bytes, 74 bytes untransferred [ 3.010377] xhci_hcd 0000:03:00.0: Giveback URB ffff88011872ac00, len = 22, expected = 96, status = -121 [ 3.010450] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.010454] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 3.010514] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.010519] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.010523] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.010527] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.010540] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.010543] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.010546] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 3.010548] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67680 (DMA) [ 3.010551] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.010554] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a67680 (0x37a67680 dma), new cycle = 1 [ 3.010557] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.010563] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.010632] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.010711] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67681 [ 3.013001] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 254 bytes, 178 bytes untransferred [ 3.013008] xhci_hcd 0000:03:00.0: Giveback URB ffff88011872ac00, len = 76, expected = 254, status = -121 [ 3.013086] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.013089] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 3.013147] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.013151] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.013155] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.013159] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.013172] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.013174] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.013177] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 3.013179] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a676c0 (DMA) [ 3.013181] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.013184] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a676c0 (0x37a676c0 dma), new cycle = 1 [ 3.013186] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.013192] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.013261] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.013334] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a676c1 [ 3.013670] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 254 bytes, 230 bytes untransferred [ 3.013673] xhci_hcd 0000:03:00.0: Giveback URB ffff88011872ac00, len = 24, expected = 254, status = -121 [ 3.013745] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.013748] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 3.013803] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.013806] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.013808] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.013810] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.013812] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.013823] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.013826] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 3.013828] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67700 (DMA) [ 3.013830] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.013833] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a67700 (0x37a67700 dma), new cycle = 1 [ 3.013835] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.013841] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.013906] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.013980] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67701 [ 4.233591] EXT4-fs (loop0): recovery complete [ 4.255335] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 27.689886] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 27.729395] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 27.769663] udevd[652]: starting version 175 [ 27.950581] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 27.950592] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.950598] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 27.950604] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.950606] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 27.950610] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.950612] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 27.950616] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.950618] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 28.033600] lp: driver loaded but no devices found [ 28.044000] Bluetooth: Core ver 2.16 [ 28.044051] NET: Registered protocol family 31 [ 28.044053] Bluetooth: HCI device and connection manager initialized [ 28.044070] Bluetooth: HCI socket layer initialized [ 28.044081] Bluetooth: L2CAP socket layer initialized [ 28.044103] Bluetooth: SCO socket layer initialized [ 28.108109] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 96 bytes, 74 bytes untransferred [ 28.108118] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d3b69380, len = 22, expected = 96, status = -121 [ 28.108359] xhci_hcd 0000:03:00.0: Stalled endpoint [ 28.108363] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 28.108405] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 28.108410] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 28.108413] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 28.108416] xhci_hcd 0000:03:00.0: Finding endpoint context [ 28.108419] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 28.108422] xhci_hcd 0000:03:00.0: Cycle state = 0x0 [ 28.108425] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58a80 (virtual) [ 28.108428] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67a10 (DMA) [ 28.108431] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 28.108436] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58a80 (0x37a67800 dma), new deq ptr = ffff880037a67a10 (0x37a67a10 dma), new cycle = 0 [ 28.108439] xhci_hcd 0000:03:00.0: // Ding dong! [ 28.108446] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 28.108514] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 28.108590] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67a10 [ 28.113879] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 254 bytes, 178 bytes untransferred [ 28.113886] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d3b69380, len = 76, expected = 254, status = -121 [ 28.113955] xhci_hcd 0000:03:00.0: Stalled endpoint [ 28.113961] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 28.114016] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 28.114020] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 28.114024] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 28.114027] xhci_hcd 0000:03:00.0: Finding endpoint context [ 28.114030] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 28.114033] xhci_hcd 0000:03:00.0: Cycle state = 0x0 [ 28.114036] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58a80 (virtual) [ 28.114039] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67a50 (DMA) [ 28.114041] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 28.114046] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58a80 (0x37a67800 dma), new deq ptr = ffff880037a67a50 (0x37a67a50 dma), new cycle = 0 [ 28.114049] xhci_hcd 0000:03:00.0: // Ding dong! [ 28.114056] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 28.114123] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 28.114200] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67a50 [ 28.115471] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 254 bytes, 230 bytes untransferred [ 28.115476] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d1aaea40, len = 24, expected = 254, status = -121 [ 28.115543] xhci_hcd 0000:03:00.0: Stalled endpoint [ 28.115549] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 28.115595] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 28.115599] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 28.115602] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 28.115605] xhci_hcd 0000:03:00.0: Finding endpoint context [ 28.115608] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 28.115611] xhci_hcd 0000:03:00.0: Cycle state = 0x0 [ 28.115614] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58a80 (virtual) [ 28.115617] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a67a90 (DMA) [ 28.115620] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 28.115624] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58a80 (0x37a67800 dma), new deq ptr = ffff880037a67a90 (0x37a67a90 dma), new cycle = 0 [ 28.115627] xhci_hcd 0000:03:00.0: // Ding dong! [ 28.115634] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 28.115703] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 28.115780] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a67a90 [ 28.259832] ppdev: user-space parallel port driver [ 28.287701] wmi: Mapper loaded [ 28.290817] samsung_laptop: detected SABI interface: SwSmi@ [ 28.290822] samsung_laptop: Backlight controlled by ACPI video driver [ 28.326416] cfg80211: Calling CRDA to update world regulatory domain [ 28.334406] cfg80211: World regulatory domain updated: [ 28.334410] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 28.334413] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.334415] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.334416] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 28.334417] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.334419] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 28.391037] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.391041] Bluetooth: BNEP filters: protocol multicast [ 28.391054] Bluetooth: BNEP socket layer initialized [ 28.408872] Bluetooth: RFCOMM TTY layer initialized [ 28.408898] Bluetooth: RFCOMM socket layer initialized [ 28.408901] Bluetooth: RFCOMM ver 1.11 [ 28.419819] btusb 2-1.5:1.0: usb_probe_interface [ 28.419825] btusb 2-1.5:1.0: usb_probe_interface - got id [ 28.421495] usbcore: registered new interface driver btusb [ 28.422055] usb 2-1.5: link qh1-0e01/ffff880078cb8f40 start 0 [1/2 us] [ 28.631403] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 96 bytes, 74 bytes untransferred [ 28.631410] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d1aae8c0, len = 22, expected = 96, status = -121 [ 28.631471] xhci_hcd 0000:03:00.0: Stalled endpoint [ 28.631475] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b11c80, len = 0, expected = 13, status = -32 [ 28.631519] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 28.631525] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 28.631527] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 28.631529] xhci_hcd 0000:03:00.0: Finding endpoint context [ 28.631532] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 28.631534] xhci_hcd 0000:03:00.0: Cycle state = 0x0 [ 28.631536] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037a58aa0 (virtual) [ 28.631539] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a676b0 (DMA) [ 28.631541] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 28.631553] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037a58aa0 (0x37a67400 dma), new deq ptr = ffff880037a676b0 (0x37a676b0 dma), new cycle = 0 [ 28.631555] xhci_hcd 0000:03:00.0: // Ding dong! [ 28.631560] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 28.631627] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 28.631703] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a676b0 [ 28.633632] type=1400 audit(1377169640.560:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=904 comm="apparmor_parser" [ 28.633650] type=1400 audit(1377169640.560:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser" [ 28.633663] type=1400 audit(1377169640.560:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser" [ 28.633688] type=1400 audit(1377169640.560:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=909 comm="apparmor_parser" [ 28.633707] type=1400 audit(1377169640.560:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=909 comm="apparmor_parser" [ 28.633722] type=1400 audit(1377169640.560:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=909 comm="apparmor_parser" [ 28.634935] type=1400 audit(1377169640.560:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=904 comm="apparmor_parser" [ 28.634953] type=1400 audit(1377169640.560:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=904 comm="apparmor_parser" [ 28.634983] type=1400 audit(1377169640.560:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=909 comm="apparmor_parser" [ 28.634998] type=1400 audit(1377169640.560:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=909 comm="apparmor_parser" [ 28.638207] Linux video capture interface: v2.00 [ 28.645715] [drm] Initialized drm 1.1.0 20060810 [ 28.696916] init: failsafe main process (1014) killed by TERM signal [ 29.114252] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 29.114257] Copyright(c) 2003-2013 Intel Corporation [ 29.114483] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 29.114675] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 29.457979] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 29.745105] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 29.760227] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 29.769289] uvcvideo 1-1.4:1.0: usb_probe_interface [ 29.769300] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 29.769376] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 29.785092] i915: module verification failed: signature and/or required key missing - tainting kernel [ 29.788915] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5 [ 29.789304] usbcore: registered new interface driver uvcvideo [ 29.789309] USB Video Class driver (1.1.1) [ 29.792117] [drm] Memory usable by graphics device = 2048M [ 29.792128] i915 0000:00:02.0: setting latency timer to 64 [ 29.796090] usb 1-1.4: link qh16-0001/ffff8800d03c5f40 start 2 [1/0 us] [ 29.796163] usb 1-1.4: unlink qh16-0001/ffff8800d03c5f40 start 2 [1/0 us] [ 29.828318] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 29.828333] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 29.828334] [drm] Driver supports precise vblank timestamp query. [ 29.828556] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 29.841084] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 29.843998] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 29.844001] [drm] This can cause pipe underruns and display issues. [ 29.844003] [drm] Please upgrade your BIOS to fix this. [ 29.862033] fbcon: inteldrmfb (fb0) is primary device [ 29.956536] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 29.956537] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 29.956539] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 29.956541] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 29.956642] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 30.023148] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 30.039934] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 30.046555] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 30.320778] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 30.327410] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 30.407894] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.825043] Console: switching to colour frame buffer device 170x48 [ 30.830181] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 30.830183] i915 0000:00:02.0: registered panic notifier [ 30.857004] acpi device:33: registered as cooling_device9 [ 30.857492] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 30.858113] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 30.860382] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 30.861052] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 30.890828] init: alsa-restore main process (1221) terminated with status 19 [ 30.901474] usb 1-1.2: link qh8-0e01/ffff88010c7354c0 start 3 [1/2 us] [ 30.909678] usb 1-1.2: unlink qh8-0e01/ffff88010c7354c0 start 3 [1/2 us] [ 30.916650] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 30.917586] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 30.918123] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 31.448124] ehci-pci 0000:00:1a.0: reused qh ffff88010c7354c0 schedule [ 31.448131] usb 1-1.2: link qh8-0e01/ffff88010c7354c0 start 3 [1/2 us] [ 31.794555] usb 1-1.4: usb auto-suspend, wakeup 0 [ 31.802717] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 33.189516] usb usb3: usb auto-resume [ 33.189536] hub 3-0:1.0: hub_resume [ 33.189544] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.189546] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.189562] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.189564] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.189583] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.189602] hub 3-0:1.0: hub_suspend [ 33.189618] usb usb3: bus auto-suspend, wakeup 1 [ 33.189634] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.189667] usb usb3: usb auto-resume [ 33.201276] hub 3-0:1.0: hub_resume [ 33.201287] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.201290] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.201305] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.201307] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.201322] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.201347] hub 3-0:1.0: hub_suspend [ 33.201361] usb usb3: bus auto-suspend, wakeup 1 [ 33.201375] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.201856] usb 1-1.4: usb auto-resume [ 33.249329] usb 1-1.4: finish resume [ 33.255924] usb usb3: usb auto-resume [ 33.255944] hub 3-0:1.0: hub_resume [ 33.255953] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.255955] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.255973] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.255975] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.255997] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.256013] hub 3-0:1.0: hub_suspend [ 33.256028] usb usb3: bus auto-suspend, wakeup 1 [ 33.256043] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.256053] usb usb3: usb auto-resume [ 33.265250] hub 3-0:1.0: hub_resume [ 33.265262] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.265265] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.265283] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.265286] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.265341] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.265356] hub 3-0:1.0: hub_suspend [ 33.265369] usb usb3: bus auto-suspend, wakeup 1 [ 33.265382] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.266769] usb usb3: usb auto-resume [ 33.277227] hub 3-0:1.0: hub_resume [ 33.277243] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.277247] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.277273] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.277277] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.277303] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.277324] hub 3-0:1.0: hub_suspend [ 33.277342] usb usb3: bus auto-suspend, wakeup 1 [ 33.277356] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.277407] usb usb3: usb auto-resume [ 33.293209] hub 3-0:1.0: hub_resume [ 33.293222] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.293224] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.293245] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.293247] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.293264] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.293275] hub 3-0:1.0: hub_suspend [ 33.293290] usb usb3: bus auto-suspend, wakeup 1 [ 33.293304] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.300502] usb usb3: usb auto-resume [ 33.309202] hub 3-0:1.0: hub_resume [ 33.309216] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.309218] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.309233] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.309235] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.309251] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.309283] hub 3-0:1.0: hub_suspend [ 33.309300] usb usb3: bus auto-suspend, wakeup 1 [ 33.309313] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.309366] usb usb3: usb auto-resume [ 33.321197] hub 3-0:1.0: hub_resume [ 33.321210] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.321212] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.321227] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.321229] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.321244] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.321255] hub 3-0:1.0: hub_suspend [ 33.321271] usb usb3: bus auto-suspend, wakeup 1 [ 33.321287] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.338964] usb usb3: usb auto-resume [ 33.338985] hub 3-0:1.0: hub_resume [ 33.338994] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.338996] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.339013] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.339014] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.339033] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.339054] hub 3-0:1.0: hub_suspend [ 33.339070] usb usb3: bus auto-suspend, wakeup 1 [ 33.339084] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.339125] usb usb3: usb auto-resume [ 33.349228] hub 3-0:1.0: hub_resume [ 33.349244] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.349247] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.349265] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.349268] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.349287] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.349296] hub 3-0:1.0: hub_suspend [ 33.349309] usb usb3: bus auto-suspend, wakeup 1 [ 33.349323] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.351686] usb usb3: usb auto-resume [ 33.361274] hub 3-0:1.0: hub_resume [ 33.361302] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.361306] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.361326] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.361328] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.361373] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.361383] hub 3-0:1.0: hub_suspend [ 33.361401] usb usb3: bus auto-suspend, wakeup 1 [ 33.361424] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.361487] usb usb3: usb auto-resume [ 33.373268] hub 3-0:1.0: hub_resume [ 33.373300] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.373307] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.373348] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.373353] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.373417] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.373440] hub 3-0:1.0: hub_suspend [ 33.373458] usb usb3: bus auto-suspend, wakeup 1 [ 33.373474] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.374715] usb usb3: usb auto-resume [ 33.385194] hub 3-0:1.0: hub_resume [ 33.385211] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.385215] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.385235] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.385237] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.385295] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.385318] hub 3-0:1.0: hub_suspend [ 33.385338] usb usb3: bus auto-suspend, wakeup 1 [ 33.385354] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.385372] usb usb3: usb auto-resume [ 33.397263] hub 3-0:1.0: hub_resume [ 33.397287] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.397292] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.397320] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.397324] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.397402] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.397432] hub 3-0:1.0: hub_suspend [ 33.397455] usb usb3: bus auto-suspend, wakeup 1 [ 33.397471] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.404467] usb usb3: usb auto-resume [ 33.413253] hub 3-0:1.0: hub_resume [ 33.413292] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.413299] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.413338] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.413347] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.413417] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.413510] hub 3-0:1.0: hub_suspend [ 33.413616] usb usb3: bus auto-suspend, wakeup 1 [ 33.413635] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.413727] usb usb3: usb auto-resume [ 33.425124] hub 3-0:1.0: hub_resume [ 33.425146] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.425149] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.425166] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.425168] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.425185] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.425195] hub 3-0:1.0: hub_suspend [ 33.425215] usb usb3: bus auto-suspend, wakeup 1 [ 33.425229] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.426223] usb usb3: usb auto-resume [ 33.437136] hub 3-0:1.0: hub_resume [ 33.437147] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.437150] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.437166] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.437168] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.437182] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.437207] hub 3-0:1.0: hub_suspend [ 33.437221] usb usb3: bus auto-suspend, wakeup 1 [ 33.437235] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.437283] usb usb3: usb auto-resume [ 33.449094] hub 3-0:1.0: hub_resume [ 33.449104] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.449107] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.449131] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.449133] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.449162] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.449180] hub 3-0:1.0: hub_suspend [ 33.449194] usb usb3: bus auto-suspend, wakeup 1 [ 33.449208] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.451652] usb usb3: usb auto-resume [ 33.461157] hub 3-0:1.0: hub_resume [ 33.461170] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.461173] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.461190] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.461192] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.461208] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.461244] hub 3-0:1.0: hub_suspend [ 33.461267] usb usb3: bus auto-suspend, wakeup 1 [ 33.461281] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.461332] usb usb3: usb auto-resume [ 33.473076] hub 3-0:1.0: hub_resume [ 33.473086] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.473089] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.473114] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.473116] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.473170] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.473189] hub 3-0:1.0: hub_suspend [ 33.473213] usb usb3: bus auto-suspend, wakeup 1 [ 33.473227] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.474857] usb usb3: usb auto-resume [ 33.485065] hub 3-0:1.0: hub_resume [ 33.485082] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.485084] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.485099] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.485101] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.485149] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.485169] hub 3-0:1.0: hub_suspend [ 33.485190] usb usb3: bus auto-suspend, wakeup 1 [ 33.485204] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.129640] ------------[ cut here ]------------ [ 34.129663] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 34.129665] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 34.129698] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 34.129700] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 34.129702] 0000000000000a6c ffff880072b75a88 ffffffff816f4677 0000000000000007 [ 34.129706] 0000000000000000 ffff880072b75ac8 ffffffff810672bc ffff8800752d6000 [ 34.129708] ffff88006eec4380 ffff88006ed67f00 ffff88006eec4438 ffff880074a44000 [ 34.129712] Call Trace: [ 34.129719] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 34.129723] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 34.129726] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 34.129737] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 34.129741] [<ffffffff811961be>] ? cache_free_debugcheck+0x13e/0x280 [ 34.129752] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 34.129762] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 34.129772] [<ffffffffa02d52ed>] i915_gem_object_move_to_inactive+0x12d/0x140 [i915] [ 34.129781] [<ffffffffa02d6484>] i915_gem_retire_requests_ring+0xd4/0x170 [i915] [ 34.129790] [<ffffffffa02d6583>] i915_gem_object_wait_rendering+0x63/0x90 [i915] [ 34.129800] [<ffffffffa02d8f3f>] i915_gem_object_set_to_gtt_domain+0x5f/0x220 [i915] [ 34.129804] [<ffffffff816fd94e>] ? _raw_spin_unlock+0xe/0x10 [ 34.129814] [<ffffffffa02dcc8d>] i915_gem_pwrite_ioctl+0x7ad/0xa10 [i915] [ 34.129817] [<ffffffff816fa58e>] ? mutex_unlock+0xe/0x10 [ 34.129825] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 34.129834] [<ffffffffa02dc4e0>] ? i915_gem_set_caching_ioctl+0x100/0x100 [i915] [ 34.129838] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 34.129841] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 34.129844] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 34.129848] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 34.129849] ---[ end trace 86babc5b7f1c6019 ]--- [ 34.130282] ------------[ cut here ]------------ [ 34.130300] WARNING: CPU: 2 PID: 1788 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 34.130301] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 34.130331] CPU: 2 PID: 1788 Comm: unity_support_t Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 34.130333] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 34.130334] 0000000000000a6c ffff88010b741bd8 ffffffff816f4677 0000000000000007 [ 34.130338] 0000000000000000 ffff88010b741c18 ffffffff810672bc ffff8800752d6000 [ 34.130341] ffff88006eec4680 ffff88006eebd080 ffff88006eec4738 ffff880074a44000 [ 34.130344] Call Trace: [ 34.130349] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 34.130353] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 34.130355] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 34.130366] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 34.130370] [<ffffffff8114875a>] ? filemap_fault+0x11a/0x570 [ 34.130380] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 34.130389] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 34.130397] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 34.130405] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 34.130413] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 34.130420] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 34.130428] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 34.130431] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 34.130434] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 34.130437] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 34.130440] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 34.130442] ---[ end trace 86babc5b7f1c601a ]--- [ 34.158569] ------------[ cut here ]------------ [ 34.158597] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 34.158599] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 34.158637] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 34.158639] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 34.158641] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 34.158646] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 34.158649] ffff880072a07b00 ffff880070087c80 ffff880072a07bb8 ffff880074a44000 [ 34.158652] Call Trace: [ 34.158660] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 34.158665] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 34.158668] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 34.158680] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 34.158684] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 34.158695] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 34.158708] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 34.158718] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 34.158728] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 34.158737] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 34.158745] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 34.158754] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 34.158758] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 34.158763] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 34.158766] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 34.158769] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 34.158773] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 34.158775] ---[ end trace 86babc5b7f1c601b ]--- [ 34.490351] usb usb3: usb auto-resume [ 34.490374] hub 3-0:1.0: hub_resume [ 34.490385] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.490387] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.490408] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.490410] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.490463] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.490494] hub 3-0:1.0: hub_suspend [ 34.490550] usb usb3: bus auto-suspend, wakeup 1 [ 34.490566] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.492941] usb usb3: usb auto-resume [ 34.508503] hub 3-0:1.0: hub_resume [ 34.508520] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.508523] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.508616] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.508621] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.508680] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.508700] hub 3-0:1.0: hub_suspend [ 34.508716] usb usb3: bus auto-suspend, wakeup 1 [ 34.508731] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.508751] usb usb3: usb auto-resume [ 34.520362] hub 3-0:1.0: hub_resume [ 34.520377] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.520380] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.520398] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.520400] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.520424] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.520454] hub 3-0:1.0: hub_suspend [ 34.520475] usb usb3: bus auto-suspend, wakeup 1 [ 34.520492] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.521889] usb usb3: usb auto-resume [ 34.532355] hub 3-0:1.0: hub_resume [ 34.532370] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.532373] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.532391] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.532393] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.532419] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.532459] hub 3-0:1.0: hub_suspend [ 34.532480] usb usb3: bus auto-suspend, wakeup 1 [ 34.532508] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.532571] usb usb3: usb auto-resume [ 34.544379] hub 3-0:1.0: hub_resume [ 34.544417] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.544420] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.544460] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.544476] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.544542] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.544583] hub 3-0:1.0: hub_suspend [ 34.544601] usb usb3: bus auto-suspend, wakeup 1 [ 34.544617] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.555338] usb usb3: usb auto-resume [ 34.564355] hub 3-0:1.0: hub_resume [ 34.564385] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.564400] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.564417] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.564432] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.564451] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.564495] hub 3-0:1.0: hub_suspend [ 34.564529] usb usb3: bus auto-suspend, wakeup 1 [ 34.564556] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.564617] usb usb3: usb auto-resume [ 34.576335] hub 3-0:1.0: hub_resume [ 34.576350] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.576353] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.576390] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.576408] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.576545] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.576572] hub 3-0:1.0: hub_suspend [ 34.576601] usb usb3: bus auto-suspend, wakeup 1 [ 34.576616] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.577631] usb usb3: usb auto-resume [ 34.588353] hub 3-0:1.0: hub_resume [ 34.588371] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.588374] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.588426] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.588428] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.588486] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.588507] hub 3-0:1.0: hub_suspend [ 34.588537] usb usb3: bus auto-suspend, wakeup 1 [ 34.588552] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.588573] usb usb3: usb auto-resume [ 34.600297] hub 3-0:1.0: hub_resume [ 34.600311] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.600314] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.600330] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.600332] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.600353] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.600373] hub 3-0:1.0: hub_suspend [ 34.600390] usb usb3: bus auto-suspend, wakeup 1 [ 34.600405] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.601621] usb usb3: usb auto-resume [ 34.612326] hub 3-0:1.0: hub_resume [ 34.612362] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.612364] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.612384] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.612386] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.612430] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.612451] hub 3-0:1.0: hub_suspend [ 34.612466] usb usb3: bus auto-suspend, wakeup 1 [ 34.612480] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.612499] usb usb3: usb auto-resume [ 34.624331] hub 3-0:1.0: hub_resume [ 34.624364] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.624367] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.624400] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.624403] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.624455] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.624491] hub 3-0:1.0: hub_suspend [ 34.624510] usb usb3: bus auto-suspend, wakeup 1 [ 34.624524] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.626104] usb usb3: usb auto-resume [ 34.636383] hub 3-0:1.0: hub_resume [ 34.636400] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.636403] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.636501] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.636506] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.636566] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.636604] hub 3-0:1.0: hub_suspend [ 34.636619] usb usb3: bus auto-suspend, wakeup 1 [ 34.636634] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.636651] usb usb3: usb auto-resume [ 34.648258] hub 3-0:1.0: hub_resume [ 34.648271] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.648274] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.648291] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.648293] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.648315] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.648334] hub 3-0:1.0: hub_suspend [ 34.648351] usb usb3: bus auto-suspend, wakeup 1 [ 34.648366] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.651581] usb usb3: usb auto-resume [ 34.660305] hub 3-0:1.0: hub_resume [ 34.660323] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.660326] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.660345] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.660347] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.660397] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.660420] hub 3-0:1.0: hub_suspend [ 34.660435] usb usb3: bus auto-suspend, wakeup 1 [ 34.660450] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.660467] usb usb3: usb auto-resume [ 34.672298] hub 3-0:1.0: hub_resume [ 34.672329] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.672332] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.672365] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.672367] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.672418] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.672454] hub 3-0:1.0: hub_suspend [ 34.672471] usb usb3: bus auto-suspend, wakeup 1 [ 34.672487] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.676888] usb usb3: usb auto-resume [ 34.688315] hub 3-0:1.0: hub_resume [ 34.688334] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.688337] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.688404] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.688408] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.688547] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.688582] hub 3-0:1.0: hub_suspend [ 34.688598] usb usb3: bus auto-suspend, wakeup 1 [ 34.688613] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.688627] usb usb3: usb auto-resume [ 34.700274] hub 3-0:1.0: hub_resume [ 34.700290] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.700293] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.700329] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.700331] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.700380] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.700401] hub 3-0:1.0: hub_suspend [ 34.700416] usb usb3: bus auto-suspend, wakeup 1 [ 34.700431] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.701439] usb usb3: usb auto-resume [ 34.712247] hub 3-0:1.0: hub_resume [ 34.712272] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.712278] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.712319] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.712321] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.712339] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.712359] hub 3-0:1.0: hub_suspend [ 34.712382] usb usb3: bus auto-suspend, wakeup 1 [ 34.712410] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.712463] usb usb3: usb auto-resume [ 34.724265] hub 3-0:1.0: hub_resume [ 34.724284] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.724287] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.724314] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.724317] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.724345] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.724367] hub 3-0:1.0: hub_suspend [ 34.724397] usb usb3: bus auto-suspend, wakeup 1 [ 34.724413] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.729757] usb usb3: usb auto-resume [ 34.740266] hub 3-0:1.0: hub_resume [ 34.740285] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.740290] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.740325] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.740328] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.740351] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.740370] hub 3-0:1.0: hub_suspend [ 34.740387] usb usb3: bus auto-suspend, wakeup 1 [ 34.740403] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.740453] usb usb3: usb auto-resume [ 34.752235] hub 3-0:1.0: hub_resume [ 34.752250] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.752253] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.752274] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.752276] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.752324] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.752346] hub 3-0:1.0: hub_suspend [ 34.752374] usb usb3: bus auto-suspend, wakeup 1 [ 34.752389] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.753695] usb usb3: usb auto-resume [ 34.764261] hub 3-0:1.0: hub_resume [ 34.764274] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.764277] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.764294] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.764297] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.764345] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.764366] hub 3-0:1.0: hub_suspend [ 34.764384] usb usb3: bus auto-suspend, wakeup 1 [ 34.764399] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.764449] usb usb3: usb auto-resume [ 34.776220] hub 3-0:1.0: hub_resume [ 34.776236] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.776240] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.776325] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.776332] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.776384] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.776398] hub 3-0:1.0: hub_suspend [ 34.776429] usb usb3: bus auto-suspend, wakeup 1 [ 34.776456] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.778048] usb usb3: usb auto-resume [ 34.788219] hub 3-0:1.0: hub_resume [ 34.788244] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.788246] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.788260] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.788262] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.788276] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.788298] hub 3-0:1.0: hub_suspend [ 34.788311] usb usb3: bus auto-suspend, wakeup 1 [ 34.788325] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.788371] usb usb3: usb auto-resume [ 34.800142] hub 3-0:1.0: hub_resume [ 34.800153] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.800155] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.800171] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.800173] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.800186] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.800194] hub 3-0:1.0: hub_suspend [ 34.800206] usb usb3: bus auto-suspend, wakeup 1 [ 34.800219] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.801244] usb usb3: usb auto-resume [ 34.812121] hub 3-0:1.0: hub_resume [ 34.812129] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.812131] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.812144] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.812146] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.812162] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.812176] hub 3-0:1.0: hub_suspend [ 34.812189] usb usb3: bus auto-suspend, wakeup 1 [ 34.812202] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.812212] usb usb3: usb auto-resume [ 34.824113] hub 3-0:1.0: hub_resume [ 34.824119] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.824121] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.824143] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.824145] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.824186] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.824200] hub 3-0:1.0: hub_suspend [ 34.824213] usb usb3: bus auto-suspend, wakeup 1 [ 34.824226] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.825091] usb usb3: usb auto-resume [ 34.836106] hub 3-0:1.0: hub_resume [ 34.836112] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.836114] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.836125] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.836126] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.836139] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.836156] hub 3-0:1.0: hub_suspend [ 34.836191] usb usb3: bus auto-suspend, wakeup 1 [ 34.836206] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.836259] usb usb3: usb auto-resume [ 34.848107] hub 3-0:1.0: hub_resume [ 34.848117] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.848119] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.848135] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.848137] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.848150] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.848157] hub 3-0:1.0: hub_suspend [ 34.848169] usb usb3: bus auto-suspend, wakeup 1 [ 34.848182] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.849488] usb usb3: usb auto-resume [ 34.864106] hub 3-0:1.0: hub_resume [ 34.864117] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.864119] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.864134] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.864136] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.864149] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.864172] hub 3-0:1.0: hub_suspend [ 34.864185] usb usb3: bus auto-suspend, wakeup 1 [ 34.864197] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.864244] usb usb3: usb auto-resume [ 34.880071] hub 3-0:1.0: hub_resume [ 34.880078] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.880079] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.880102] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.880104] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.880147] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.880162] hub 3-0:1.0: hub_suspend [ 34.880174] usb usb3: bus auto-suspend, wakeup 1 [ 34.880187] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.882264] usb usb3: usb auto-resume [ 34.892086] hub 3-0:1.0: hub_resume [ 34.892097] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.892100] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.892114] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.892116] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.892130] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.892153] hub 3-0:1.0: hub_suspend [ 34.892165] usb usb3: bus auto-suspend, wakeup 1 [ 34.892178] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.892225] usb usb3: usb auto-resume [ 34.904056] hub 3-0:1.0: hub_resume [ 34.904062] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.904064] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.904088] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.904089] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.904132] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.904146] hub 3-0:1.0: hub_suspend [ 34.904158] usb usb3: bus auto-suspend, wakeup 1 [ 34.904171] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.905006] usb usb3: usb auto-resume [ 34.916147] hub 3-0:1.0: hub_resume [ 34.916163] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.916166] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.916180] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.916182] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.916217] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.916233] hub 3-0:1.0: hub_suspend [ 34.916246] usb usb3: bus auto-suspend, wakeup 1 [ 34.916260] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.916270] usb usb3: usb auto-resume [ 34.928112] hub 3-0:1.0: hub_resume [ 34.928125] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.928128] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.928146] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.928149] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.928210] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.928229] hub 3-0:1.0: hub_suspend [ 34.928245] usb usb3: bus auto-suspend, wakeup 1 [ 34.928260] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.929721] usb usb3: usb auto-resume [ 34.940135] hub 3-0:1.0: hub_resume [ 34.940148] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.940151] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.940167] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.940170] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.940219] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.940239] hub 3-0:1.0: hub_suspend [ 34.940255] usb usb3: bus auto-suspend, wakeup 1 [ 34.940270] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.940357] usb usb3: usb auto-resume [ 34.952094] hub 3-0:1.0: hub_resume [ 34.952122] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.952125] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.952160] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.952163] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.952220] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.952256] hub 3-0:1.0: hub_suspend [ 34.952275] usb usb3: bus auto-suspend, wakeup 1 [ 34.952289] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.954014] usb usb3: usb auto-resume [ 34.964128] hub 3-0:1.0: hub_resume [ 34.964144] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.964148] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.964171] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.964174] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.964236] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.964261] hub 3-0:1.0: hub_suspend [ 34.964282] usb usb3: bus auto-suspend, wakeup 1 [ 34.964298] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.964324] usb usb3: usb auto-resume [ 34.976077] hub 3-0:1.0: hub_resume [ 34.976092] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.976096] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.976118] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.976121] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.976178] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.976201] hub 3-0:1.0: hub_suspend [ 34.976221] usb usb3: bus auto-suspend, wakeup 1 [ 34.976237] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.978485] usb usb3: usb auto-resume [ 34.988048] hub 3-0:1.0: hub_resume [ 34.988066] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.988070] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.988094] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.988097] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.988155] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.988180] hub 3-0:1.0: hub_suspend [ 34.988201] usb usb3: bus auto-suspend, wakeup 1 [ 34.988217] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.988236] usb usb3: usb auto-resume [ 35.000071] hub 3-0:1.0: hub_resume [ 35.000086] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.000089] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.000110] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.000112] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.000171] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.000194] hub 3-0:1.0: hub_suspend [ 35.000213] usb usb3: bus auto-suspend, wakeup 1 [ 35.000227] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.601418] ------------[ cut here ]------------ [ 35.601459] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 35.601463] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 35.601534] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 35.601538] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 35.601542] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 35.601550] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 35.601557] ffff880072c39200 ffff8800709de6c0 ffff880072c392b8 ffff880074a44000 [ 35.601563] Call Trace: [ 35.601576] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 35.601586] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 35.601592] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 35.601615] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 35.601638] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 35.601659] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 35.601676] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 35.601694] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 35.601712] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 35.601728] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 35.601736] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 35.601752] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 35.601761] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 35.601767] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 35.601774] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 35.601780] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 35.601785] ---[ end trace 86babc5b7f1c601c ]--- [ 35.601869] ------------[ cut here ]------------ [ 35.601894] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 35.601896] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 35.601954] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 35.601957] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 35.601960] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 35.601966] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 35.601972] ffff8800729b30c0 ffff8800729f9080 ffff8800729b3178 ffff880074a44000 [ 35.601978] Call Trace: [ 35.601985] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 35.601993] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 35.601998] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 35.602020] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 35.602041] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 35.602058] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 35.602075] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 35.602091] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 35.602108] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 35.602124] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 35.602131] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 35.602147] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 35.602154] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 35.602160] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 35.602166] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 35.602172] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 35.602176] ---[ end trace 86babc5b7f1c601d ]--- [ 35.602256] ------------[ cut here ]------------ [ 35.602279] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 35.602281] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 35.602337] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 35.602340] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 35.602343] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 35.602349] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 35.602355] ffff88006eec4980 ffff8800729f9a40 ffff88006eec4a38 ffff880074a44000 [ 35.602361] Call Trace: [ 35.602368] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 35.602376] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 35.602381] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 35.602400] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 35.602421] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 35.602437] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 35.602454] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 35.602470] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 35.602487] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 35.602502] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 35.602510] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 35.602525] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 35.602533] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 35.602538] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 35.602545] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 35.602551] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 35.602554] ---[ end trace 86babc5b7f1c601e ]--- [ 35.602709] ------------[ cut here ]------------ [ 35.602731] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 35.602734] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 35.602789] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 35.602792] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 35.602795] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 35.602801] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 35.602807] ffff88006eec4800 ffff880070087380 ffff88006eec48b8 ffff880074a44000 [ 35.602812] Call Trace: [ 35.602819] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 35.602827] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 35.602832] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 35.602851] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 35.602871] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 35.602888] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 35.602905] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 35.602921] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 35.602938] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 35.602953] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 35.602961] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 35.602976] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 35.602984] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 35.602989] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 35.602995] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 35.603001] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 35.603005] ---[ end trace 86babc5b7f1c601f ]--- [ 35.603149] ------------[ cut here ]------------ [ 35.603170] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 35.603173] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 35.603227] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 35.603231] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 35.603233] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 35.603239] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 35.603245] ffff88006eec4c80 ffff88006eebd680 ffff88006eec4d38 ffff880074a44000 [ 35.603251] Call Trace: [ 35.603257] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 35.603265] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 35.603270] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 35.603290] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 35.603297] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 35.603317] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 35.603334] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 35.603351] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 35.603367] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 35.603384] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 35.603399] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 35.603416] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 35.603422] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 35.603429] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 35.603434] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 35.603441] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 35.603447] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 35.603450] ---[ end trace 86babc5b7f1c6020 ]--- [ 35.604235] ------------[ cut here ]------------ [ 35.604258] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 35.604261] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 35.604316] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 35.604320] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 35.604322] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 35.604329] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 35.604334] ffff88006eec4e00 ffff88006eebd740 ffff88006eec4eb8 ffff880074a44000 [ 35.604340] Call Trace: [ 35.604347] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 35.604355] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 35.604360] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 35.604379] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 35.604385] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 35.604405] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 35.604422] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 35.604439] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 35.604456] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 35.604472] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 35.604488] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 35.604505] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 35.604510] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 35.604517] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 35.604523] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 35.604529] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 35.604535] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 35.604538] ---[ end trace 86babc5b7f1c6021 ]--- [ 36.000003] ------------[ cut here ]------------ [ 36.000032] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 36.000034] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 36.000069] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 36.000071] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 36.000073] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 36.000077] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 36.000080] ffff88006ed95c80 ffff88007443bc00 ffff88006ed95d38 ffff880074a44000 [ 36.000083] Call Trace: [ 36.000091] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 36.000096] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 36.000099] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 36.000110] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 36.000120] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 36.000132] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 36.000140] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 36.000148] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 36.000156] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 36.000164] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 36.000169] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 36.000176] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 36.000180] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 36.000183] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 36.000186] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 36.000190] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 36.000192] ---[ end trace 86babc5b7f1c6022 ]--- [ 36.000235] ------------[ cut here ]------------ [ 36.000247] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 36.000249] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 36.000276] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 36.000277] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 36.000279] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 36.000282] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 36.000284] ffff880070268e00 ffff88006eebd2c0 ffff880070268eb8 ffff880074a44000 [ 36.000287] Call Trace: [ 36.000291] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 36.000295] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 36.000298] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 36.000307] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 36.000311] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 36.000320] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 36.000328] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 36.000336] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 36.000344] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 36.000351] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 36.000359] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 36.000362] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 36.000370] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 36.000373] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 36.000376] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 36.000380] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 36.000383] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 36.000384] ---[ end trace 86babc5b7f1c6023 ]--- [ 36.000418] ------------[ cut here ]------------ [ 36.000429] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 36.000430] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 36.000456] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 36.000458] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 36.000459] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 36.000462] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 36.000465] ffff880070035e40 ffff8800709de600 ffff880070035ef8 ffff880074a44000 [ 36.000467] Call Trace: [ 36.000471] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 36.000475] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 36.000477] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 36.000486] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 36.000495] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 36.000504] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 36.000511] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 36.000518] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 36.000526] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 36.000533] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 36.000537] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 36.000544] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 36.000547] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 36.000550] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 36.000566] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 36.000569] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 36.000571] ---[ end trace 86babc5b7f1c6024 ]--- [ 36.000597] ------------[ cut here ]------------ [ 36.000607] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 36.000608] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 36.000633] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 36.000635] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 36.000636] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 36.000639] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 36.000641] ffff88006eeb4840 ffff88007443bcc0 ffff88006eeb48f8 ffff880074a44000 [ 36.000644] Call Trace: [ 36.000647] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 36.000650] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 36.000653] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 36.000662] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 36.000671] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 36.000679] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 36.000687] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 36.000694] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 36.000702] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 36.000709] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 36.000712] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 36.000719] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 36.000723] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 36.000725] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 36.000728] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 36.000731] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 36.000733] ---[ end trace 86babc5b7f1c6025 ]--- [ 36.000764] ------------[ cut here ]------------ [ 36.000774] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 36.000775] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 36.000800] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 36.000802] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 36.000803] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 36.000806] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 36.000808] ffff88006ed8c0c0 ffff88006ed67c00 ffff88006ed8c178 ffff880074a44000 [ 36.000811] Call Trace: [ 36.000815] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 36.000818] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 36.000820] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 36.000830] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 36.000833] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 36.000842] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 36.000850] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 36.000857] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 36.000865] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 36.000872] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 36.000880] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 36.000887] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 36.000890] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 36.000893] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 36.000896] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 36.000899] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 36.000902] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 36.000903] ---[ end trace 86babc5b7f1c6026 ]--- [ 36.001952] ------------[ cut here ]------------ [ 36.001967] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 36.001968] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 36.002009] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 36.002011] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 36.002012] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 36.002015] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 36.002018] ffff88006ed8c6c0 ffff880075132740 ffff88006ed8c778 ffff880074a44000 [ 36.002021] Call Trace: [ 36.002025] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 36.002028] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 36.002030] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 36.002039] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 36.002042] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 36.002051] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 36.002059] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 36.002067] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 36.002075] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 36.002083] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 36.002090] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 36.002098] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 36.002100] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 36.002104] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 36.002106] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 36.002109] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 36.002112] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 36.002113] ---[ end trace 86babc5b7f1c6027 ]--- [ 36.002585] usb usb3: usb auto-resume [ 36.002606] hub 3-0:1.0: hub_resume [ 36.002615] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.002617] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.002656] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.002658] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.002702] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.002723] hub 3-0:1.0: hub_suspend [ 36.002750] usb usb3: bus auto-suspend, wakeup 1 [ 36.002765] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.002788] usb usb3: usb auto-resume [ 36.011339] hub 3-0:1.0: hub_resume [ 36.011381] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.011384] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.011439] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.011457] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.011583] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.011601] hub 3-0:1.0: hub_suspend [ 36.011620] usb usb3: bus auto-suspend, wakeup 1 [ 36.011635] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.014339] usb usb3: usb auto-resume [ 36.023300] hub 3-0:1.0: hub_resume [ 36.023313] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.023316] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.023332] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.023334] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.023351] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.023377] hub 3-0:1.0: hub_suspend [ 36.023392] usb usb3: bus auto-suspend, wakeup 1 [ 36.023407] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.023478] usb usb3: usb auto-resume [ 36.035327] hub 3-0:1.0: hub_resume [ 36.035345] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.035347] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.035457] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.035461] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.035557] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.035570] hub 3-0:1.0: hub_suspend [ 36.035605] usb usb3: bus auto-suspend, wakeup 1 [ 36.035622] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.039962] usb usb3: usb auto-resume [ 36.051287] hub 3-0:1.0: hub_resume [ 36.051308] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.051312] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.051338] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.051341] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.051398] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.051419] hub 3-0:1.0: hub_suspend [ 36.051450] usb usb3: bus auto-suspend, wakeup 1 [ 36.051465] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.051478] usb usb3: usb auto-resume [ 36.063288] hub 3-0:1.0: hub_resume [ 36.063313] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.063315] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.063332] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.063334] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.063350] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.063362] hub 3-0:1.0: hub_suspend [ 36.063403] usb usb3: bus auto-suspend, wakeup 1 [ 36.063429] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.064627] usb usb3: usb auto-resume [ 36.075293] hub 3-0:1.0: hub_resume [ 36.075314] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.075318] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.075339] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.075341] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.075358] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.075384] hub 3-0:1.0: hub_suspend [ 36.075402] usb usb3: bus auto-suspend, wakeup 1 [ 36.075418] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.075480] usb usb3: usb auto-resume [ 36.087269] hub 3-0:1.0: hub_resume [ 36.087283] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.087286] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.087302] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.087304] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.087321] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.087341] hub 3-0:1.0: hub_suspend [ 36.087357] usb usb3: bus auto-suspend, wakeup 1 [ 36.087372] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.089537] usb usb3: usb auto-resume [ 36.099292] hub 3-0:1.0: hub_resume [ 36.099309] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.099311] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.099328] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.099330] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.099377] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.099395] hub 3-0:1.0: hub_suspend [ 36.099410] usb usb3: bus auto-suspend, wakeup 1 [ 36.099425] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.099437] usb usb3: usb auto-resume [ 36.111267] hub 3-0:1.0: hub_resume [ 36.111283] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.111286] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.111306] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.111308] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.111357] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.111378] hub 3-0:1.0: hub_suspend [ 36.111394] usb usb3: bus auto-suspend, wakeup 1 [ 36.111410] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.115120] usb usb3: usb auto-resume [ 36.123220] hub 3-0:1.0: hub_resume [ 36.123236] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.123239] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.123260] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.123262] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.123284] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.123319] hub 3-0:1.0: hub_suspend [ 36.123338] usb usb3: bus auto-suspend, wakeup 1 [ 36.123365] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.123421] usb usb3: usb auto-resume [ 36.135258] hub 3-0:1.0: hub_resume [ 36.135278] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.135281] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.135302] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.135304] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.135357] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.135379] hub 3-0:1.0: hub_suspend [ 36.135397] usb usb3: bus auto-suspend, wakeup 1 [ 36.135424] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.139318] usb usb3: usb auto-resume [ 36.151226] hub 3-0:1.0: hub_resume [ 36.151239] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.151242] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.151258] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.151260] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.151280] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.151304] hub 3-0:1.0: hub_suspend [ 36.151321] usb usb3: bus auto-suspend, wakeup 1 [ 36.151337] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.151401] usb usb3: usb auto-resume [ 36.163238] hub 3-0:1.0: hub_resume [ 36.163256] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.163260] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.163286] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.163290] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.163344] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.163380] hub 3-0:1.0: hub_suspend [ 36.163400] usb usb3: bus auto-suspend, wakeup 1 [ 36.163415] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.214347] usb usb3: usb auto-resume [ 36.214370] hub 3-0:1.0: hub_resume [ 36.214383] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.214385] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.214406] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.214408] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.214447] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.214468] hub 3-0:1.0: hub_suspend [ 36.214485] usb usb3: bus auto-suspend, wakeup 1 [ 36.214500] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.214569] usb usb3: usb auto-resume [ 36.223211] hub 3-0:1.0: hub_resume [ 36.223235] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 36.223238] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.223255] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 36.223257] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 36.223275] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.223305] hub 3-0:1.0: hub_suspend [ 36.223318] usb usb3: bus auto-suspend, wakeup 1 [ 36.223331] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.590425] wlan0: authenticate with 00:04:0e:e4:00:3d [ 36.595867] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 36.597595] wlan0: authenticated [ 36.597847] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 36.597854] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 36.598888] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 36.602633] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 36.607449] wlan0: associated [ 36.607601] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 38.116337] ------------[ cut here ]------------ [ 38.116376] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 38.116380] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 38.116444] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 38.116448] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 38.116452] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 38.116459] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 38.116465] ffff88006ed95980 ffff88007443bb40 ffff88006ed95a38 ffff880074a44000 [ 38.116471] Call Trace: [ 38.116484] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 38.116493] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 38.116498] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 38.116519] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 38.116539] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 38.116557] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 38.116573] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 38.116589] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 38.116605] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 38.116619] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 38.116627] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 38.116641] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 38.116649] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 38.116655] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 38.116661] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 38.116667] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 38.116671] ---[ end trace 86babc5b7f1c6028 ]--- [ 38.116758] ------------[ cut here ]------------ [ 38.116779] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 38.116782] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 38.116833] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 38.116837] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 38.116839] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 38.116845] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 38.116850] ffff88006ed95500 ffff88007443b840 ffff88006ed955b8 ffff880074a44000 [ 38.116855] Call Trace: [ 38.116862] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 38.116869] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 38.116874] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 38.116891] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 38.116910] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 38.116926] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 38.116941] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 38.116956] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 38.116971] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 38.116985] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 38.116992] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 38.117006] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 38.117012] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 38.117017] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 38.117023] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 38.117029] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 38.117032] ---[ end trace 86babc5b7f1c6029 ]--- [ 38.117100] ------------[ cut here ]------------ [ 38.117119] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 38.117122] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 38.117171] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 38.117174] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 38.117177] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 38.117182] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 38.117188] ffff88006ed95380 ffff88007443b600 ffff88006ed95438 ffff880074a44000 [ 38.117193] Call Trace: [ 38.117199] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 38.117206] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 38.117210] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 38.117227] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 38.117234] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 38.117252] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 38.117267] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 38.117282] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 38.117297] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 38.117312] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 38.117326] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 38.117340] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 38.117347] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 38.117353] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 38.117358] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 38.117364] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 38.117369] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 38.117372] ---[ end trace 86babc5b7f1c602a ]--- [ 38.118608] ------------[ cut here ]------------ [ 38.118629] WARNING: CPU: 0 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 38.118631] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 38.118682] CPU: 0 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 38.118684] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 38.118687] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 38.118693] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 38.118698] ffff88006eec4e00 ffff88006eebd5c0 ffff88006eec4eb8 ffff880074a44000 [ 38.118703] Call Trace: [ 38.118710] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 38.118717] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 38.118722] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 38.118739] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 38.118745] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 38.118762] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 38.118778] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 38.118793] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 38.118808] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 38.118823] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 38.118837] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 38.118852] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 38.118858] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 38.118864] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 38.118869] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 38.118875] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 38.118880] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 38.118884] ---[ end trace 86babc5b7f1c602b ]--- [ 38.761556] usb 1-1.4: usb auto-suspend, wakeup 0 [ 40.538811] ------------[ cut here ]------------ [ 40.538844] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.538846] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.538899] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.538903] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.538906] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 40.538912] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.538916] ffff88006eeb4e40 ffff88007443b300 ffff88006eeb4ef8 ffff880074a44000 [ 40.538921] Call Trace: [ 40.538931] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.538938] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.538942] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.538960] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.538977] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.538992] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.539006] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.539019] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.539032] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.539044] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.539050] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 40.539062] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.539069] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.539073] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.539078] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.539084] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.539087] ---[ end trace 86babc5b7f1c602c ]--- [ 40.539138] ------------[ cut here ]------------ [ 40.539156] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.539158] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.539200] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.539203] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.539205] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 40.539210] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.539214] ffff88006eec4b00 ffff88006eebd500 ffff88006eec4bb8 ffff880074a44000 [ 40.539219] Call Trace: [ 40.539224] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.539230] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.539234] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.539249] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.539254] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 40.539269] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.539282] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.539295] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.539307] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.539320] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.539332] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.539337] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 40.539349] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.539355] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.539359] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.539364] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.539368] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.539371] ---[ end trace 86babc5b7f1c602d ]--- [ 40.539406] ------------[ cut here ]------------ [ 40.539422] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.539424] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.539465] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.539468] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.539470] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 40.539475] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.539479] ffff88006ed95e00 ffff880070087080 ffff88006ed95eb8 ffff880074a44000 [ 40.539483] Call Trace: [ 40.539489] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.539494] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.539498] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.539512] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.539527] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.539540] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.539552] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.539564] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.539577] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.539589] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.539594] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 40.539606] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.539611] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.539615] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.539620] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.539624] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.539627] ---[ end trace 86babc5b7f1c602e ]--- [ 40.539669] ------------[ cut here ]------------ [ 40.539685] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.539686] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.539727] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.539730] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.539732] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 40.539736] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.539740] ffff88006ed8ce40 ffff880078fd9c80 ffff88006ed8cef8 ffff880074a44000 [ 40.539745] Call Trace: [ 40.539750] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.539756] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.539759] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.539773] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.539791] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.539803] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.539815] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.539828] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.539840] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.539851] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.539857] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 40.539869] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.539874] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.539878] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.539883] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.539888] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.539890] ---[ end trace 86babc5b7f1c602f ]--- [ 40.539920] ------------[ cut here ]------------ [ 40.539935] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.539937] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.539978] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.539980] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.539982] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 40.539987] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.539991] ffff88006ed8c840 ffff880075132080 ffff88006ed8c8f8 ffff880074a44000 [ 40.539996] Call Trace: [ 40.540001] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.540006] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.540010] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.540024] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.540039] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.540097] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.540114] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.540140] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.540156] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.540174] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.540196] [<ffffffff81195530>] ? poison_obj+0x30/0x40 [ 40.540213] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.540231] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.540247] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.540264] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.540280] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.540293] ---[ end trace 86babc5b7f1c6030 ]--- [ 40.540323] ------------[ cut here ]------------ [ 40.540338] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.540340] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.540381] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.540384] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.540386] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 000000000000fe80 [ 40.540390] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.540395] ffff88006ed95680 ffff88007443b540 ffff88006ed95738 ffff880074a44000 [ 40.540399] Call Trace: [ 40.540404] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.540410] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.540414] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.540428] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.540445] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.540458] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.540470] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.540482] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.540495] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.540506] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.540519] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.540523] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 40.540529] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.540533] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.540537] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.540542] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.540544] ---[ end trace 86babc5b7f1c6031 ]--- [ 40.540569] ------------[ cut here ]------------ [ 40.540585] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.540587] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.540739] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.540746] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.540751] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000252 [ 40.540773] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.540826] ffff880072c39380 ffff8800709de900 ffff880072c39438 ffff880074a44000 [ 40.540836] Call Trace: [ 40.540841] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.540846] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.540850] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.540864] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.540881] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.540894] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.540906] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.540918] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.540930] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.540942] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.540954] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.540958] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 40.540964] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.540968] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.540972] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.540977] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.540979] ---[ end trace 86babc5b7f1c6032 ]--- [ 40.541004] ------------[ cut here ]------------ [ 40.541019] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.541021] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.541062] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.541064] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.541066] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 000000000000061a [ 40.541091] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.541120] ffff88006ed95800 ffff88007443b6c0 ffff88006ed958b8 ffff880074a44000 [ 40.541137] Call Trace: [ 40.541144] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.541162] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.541165] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.541180] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.541197] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.541209] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.541221] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.541233] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.541246] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.541264] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.541282] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.541288] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 40.541304] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.541311] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.541316] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.541320] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.541323] ---[ end trace 86babc5b7f1c6033 ]--- [ 40.541345] ------------[ cut here ]------------ [ 40.541360] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.541362] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.541422] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.541425] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.541427] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000a00 [ 40.541431] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.541436] ffff880072c39680 ffff880070087980 ffff880072c39738 ffff880074a44000 [ 40.541455] Call Trace: [ 40.541460] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.541465] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.541469] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.541483] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.541505] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.541521] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.541535] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.541556] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.541571] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.541583] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.541595] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.541602] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 40.541612] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.541620] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.541625] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.541630] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.541632] ---[ end trace 86babc5b7f1c6034 ]--- [ 40.541652] ------------[ cut here ]------------ [ 40.541667] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.541669] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.541717] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.541719] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.541721] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 40.541725] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.541730] ffff88006ed8c9c0 ffff8800729f9740 ffff88006ed8ca78 ffff880074a44000 [ 40.541734] Call Trace: [ 40.541739] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.541744] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.541748] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.541762] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.541779] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.541791] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.541804] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.541816] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.541828] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.541840] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.541852] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.541857] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 40.541862] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.541866] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.541870] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.541875] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.541877] ---[ end trace 86babc5b7f1c6035 ]--- [ 40.541919] ------------[ cut here ]------------ [ 40.541934] WARNING: CPU: 1 PID: 1363 at drivers/gpu/drm/i915/i915_gem.c:2668 i915_vma_unbind+0x34f/0x370 [i915]() [ 40.541936] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek arc4 snd_hda_intel snd_hda_codec iwldvm snd_hwdep snd_pcm joydev mac80211 i915(OF) snd_page_alloc uvcvideo snd_seq_midi snd_seq_midi_event snd_rawmidi videobuf2_vmalloc snd_seq iwlwifi videobuf2_memops snd_timer i2c_algo_bit drm_kms_helper videobuf2_core psmouse snd_seq_device drm videodev snd btusb rfcomm serio_raw bnep parport_pc cfg80211 soundcore samsung_laptop wmi ppdev bluetooth lp mac_hid video lpc_ich parport hid_generic usbhid hid usb_storage r8169 mii [ 40.541977] CPU: 1 PID: 1363 Comm: Xorg Tainted: GF W O 3.11.0-rc6-next20130821-1-iniza-small #1 [ 40.541979] Hardware name: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 40.541981] 0000000000000a6c ffff880072b75bd8 ffffffff816f4677 0000000000000007 [ 40.541985] 0000000000000000 ffff880072b75c18 ffffffff810672bc ffff8800752d6000 [ 40.541989] ffff88006ed8cb40 ffff880072a10f00 ffff88006ed8cbf8 ffff880074a44000 [ 40.541994] Call Trace: [ 40.541999] [<ffffffff816f4677>] dump_stack+0x46/0x58 [ 40.542004] [<ffffffff810672bc>] warn_slowpath_common+0x8c/0xc0 [ 40.542008] [<ffffffff8106730a>] warn_slowpath_null+0x1a/0x20 [ 40.542024] [<ffffffffa02da82f>] i915_vma_unbind+0x34f/0x370 [i915] [ 40.542029] [<ffffffff813826f2>] ? __debug_object_init+0x92/0x3c0 [ 40.542043] [<ffffffffa02db0de>] i915_gem_free_object+0xae/0x250 [i915] [ 40.542056] [<ffffffffa01ce8ca>] drm_gem_object_free+0x2a/0x30 [drm] [ 40.542068] [<ffffffffa01cef3c>] drm_gem_object_handle_unreference_unlocked+0x10c/0x130 [drm] [ 40.542080] [<ffffffffa01cf0cc>] drm_gem_handle_delete+0xdc/0x120 [drm] [ 40.542092] [<ffffffffa01cf248>] drm_gem_close_ioctl+0x28/0x30 [drm] [ 40.542104] [<ffffffffa01cd11a>] drm_ioctl+0x4da/0x610 [drm] [ 40.542116] [<ffffffffa01cf220>] ? drm_gem_dumb_destroy+0x20/0x20 [drm] [ 40.542121] [<ffffffff811c9c16>] ? evict+0x126/0x1c0 [ 40.542126] [<ffffffff811c1afb>] do_vfs_ioctl+0x8b/0x500 [ 40.542130] [<ffffffff8109e50d>] ? vtime_account_user+0x5d/0x70 [ 40.542135] [<ffffffff811c2001>] SyS_ioctl+0x91/0xb0 [ 40.542139] [<ffffffff81706a6f>] tracesys+0xe1/0xe6 [ 40.542141] ---[ end trace 86babc5b7f1c6036 ]--- [ 40.716125] usb 1-1.2: unlink qh8-0e01/ffff88010c7354c0 start 3 [1/2 us] [-- Attachment #3: config-3.11.0-rc6-next20130821-1-iniza-small --] [-- Type: application/octet-stream, Size: 115736 bytes --] # # Automatically generated file; DO NOT EDIT. # Linux/x86 3.11.0-rc6 Kernel Configuration # CONFIG_64BIT=y CONFIG_X86_64=y CONFIG_X86=y CONFIG_INSTRUCTION_DECODER=y CONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_MMU=y CONFIG_NEED_DMA_MAP_STATE=y CONFIG_NEED_SG_DMA_LENGTH=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_ARCH_HAS_CPU_AUTOPROBE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y CONFIG_ARCH_WANT_GENERAL_HUGETLB=y CONFIG_ZONE_DMA32=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_HAVE_INTEL_TXT=y CONFIG_X86_64_SMP=y CONFIG_X86_HT=y CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11" CONFIG_ARCH_CPU_PROBE_RELEASE=y CONFIG_ARCH_SUPPORTS_UPROBES=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_IRQ_WORK=y CONFIG_BUILDTIME_EXTABLE_SORT=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set # CONFIG_KERNEL_LZMA is not set # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set CONFIG_DEFAULT_HOSTNAME="(none)" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y CONFIG_FHANDLE=y CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_WATCH=y CONFIG_AUDIT_TREE=y # CONFIG_AUDIT_LOGINUID_IMMUTABLE is not set CONFIG_HAVE_GENERIC_HARDIRQS=y # # IRQ subsystem # CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_IRQ_DOMAIN=y # CONFIG_IRQ_DOMAIN_DEBUG is not set CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_ARCH_CLOCKSOURCE_DATA=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y # # Timers subsystem # CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ_COMMON=y # CONFIG_HZ_PERIODIC is not set CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ_FULL is not set # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y # # CPU/Task time and stats accounting # CONFIG_VIRT_CPU_ACCOUNTING=y # CONFIG_TICK_CPU_ACCOUNTING is not set CONFIG_VIRT_CPU_ACCOUNTING_GEN=y # CONFIG_IRQ_TIME_ACCOUNTING is not set CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y # # RCU Subsystem # CONFIG_TREE_RCU=y # CONFIG_PREEMPT_RCU is not set CONFIG_RCU_STALL_COMMON=y CONFIG_CONTEXT_TRACKING=y CONFIG_RCU_USER_QS=y CONFIG_CONTEXT_TRACKING_FORCE=y CONFIG_RCU_FANOUT=64 CONFIG_RCU_FANOUT_LEAF=16 # CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_RCU_FAST_NO_HZ is not set # CONFIG_TREE_RCU_TRACE is not set CONFIG_RCU_NOCB_CPU=y CONFIG_RCU_NOCB_CPU_NONE=y # CONFIG_RCU_NOCB_CPU_ZERO is not set # CONFIG_RCU_NOCB_CPU_ALL is not set CONFIG_IKCONFIG=m # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=18 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANTS_PROT_NUMA_PROT_NONE=y # CONFIG_NUMA_BALANCING is not set CONFIG_CGROUPS=y # CONFIG_CGROUP_DEBUG is not set CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y CONFIG_PROC_PID_CPUSET=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y # CONFIG_MEMCG_SWAP_ENABLED is not set # CONFIG_MEMCG_KMEM is not set CONFIG_CGROUP_HUGETLB=y CONFIG_CGROUP_PERF=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y CONFIG_BLK_CGROUP=y # CONFIG_DEBUG_BLK_CGROUP is not set CONFIG_CHECKPOINT_RESTORE=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y CONFIG_IPC_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y CONFIG_SCHED_AUTOGROUP=y CONFIG_MM_OWNER=y # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y # CONFIG_RD_LZ4 is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_PCI_QUIRKS=y # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y CONFIG_OPROFILE_NMI_TIMER=y CONFIG_KPROBES=y CONFIG_JUMP_LABEL=y CONFIG_OPTPROBES=y CONFIG_KPROBES_ON_FTRACE=y CONFIG_UPROBES=y # CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_ARCH_USE_BUILTIN_BSWAP=y CONFIG_KRETPROBES=y CONFIG_USER_RETURN_NOTIFIER=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_OPTPROBES=y CONFIG_HAVE_KPROBES_ON_FTRACE=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_DMA_ATTRS=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y CONFIG_HAVE_DMA_API_DEBUG=y CONFIG_HAVE_HW_BREAKPOINT=y CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y CONFIG_HAVE_USER_RETURN_NOTIFIER=y CONFIG_HAVE_PERF_EVENTS_NMI=y CONFIG_HAVE_PERF_REGS=y CONFIG_HAVE_PERF_USER_STACK_DUMP=y CONFIG_HAVE_ARCH_JUMP_LABEL=y CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y CONFIG_HAVE_CMPXCHG_LOCAL=y CONFIG_HAVE_CMPXCHG_DOUBLE=y CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y CONFIG_HAVE_ARCH_SECCOMP_FILTER=y CONFIG_SECCOMP_FILTER=y CONFIG_HAVE_CONTEXT_TRACKING=y CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_HAVE_ARCH_SOFT_DIRTY=y CONFIG_MODULES_USE_ELF_RELA=y CONFIG_OLD_SIGSUSPEND3=y CONFIG_COMPAT_OLD_SIGACTION=y # # GCOV-based kernel profiling # # CONFIG_GCOV_KERNEL is not set # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_MODULE_SIG=y # CONFIG_MODULE_SIG_FORCE is not set CONFIG_MODULE_SIG_ALL=y # CONFIG_MODULE_SIG_SHA1 is not set # CONFIG_MODULE_SIG_SHA224 is not set # CONFIG_MODULE_SIG_SHA256 is not set # CONFIG_MODULE_SIG_SHA384 is not set CONFIG_MODULE_SIG_SHA512=y CONFIG_MODULE_SIG_HASH="sha512" CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_BLK_DEV_BSG=y CONFIG_BLK_DEV_BSGLIB=y CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y # CONFIG_CMDLINE_PARSER is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y CONFIG_ACORN_PARTITION=y # CONFIG_ACORN_PARTITION_CUMANA is not set # CONFIG_ACORN_PARTITION_EESOX is not set CONFIG_ACORN_PARTITION_ICS=y # CONFIG_ACORN_PARTITION_ADFS is not set # CONFIG_ACORN_PARTITION_POWERTEC is not set CONFIG_ACORN_PARTITION_RISCIX=y # CONFIG_AIX_PARTITION is not set CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y CONFIG_SYSV68_PARTITION=y # CONFIG_CMDLINE_PARTITION is not set CONFIG_BLOCK_COMPAT=y # # IO Schedulers # CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y CONFIG_CFQ_GROUP_IOSCHED=y CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_ASN1=y CONFIG_UNINLINE_SPIN_UNLOCK=y CONFIG_FREEZER=y # # Processor type and features # CONFIG_ZONE_DMA=y CONFIG_SMP=y CONFIG_X86_X2APIC=y CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y CONFIG_X86_NUMACHIP=y # CONFIG_X86_VSMP is not set # CONFIG_X86_UV is not set # CONFIG_X86_INTEL_LPSS is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_PARAVIRT_SPINLOCKS=y CONFIG_XEN=y CONFIG_XEN_DOM0=y CONFIG_XEN_PRIVILEGED_GUEST=y CONFIG_XEN_PVHVM=y CONFIG_XEN_MAX_DOMAIN_MEMORY=500 CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_KVM_GUEST=y # CONFIG_KVM_DEBUG_FS is not set # CONFIG_PARAVIRT_TIME_ACCOUNTING is not set CONFIG_PARAVIRT_CLOCK=y CONFIG_NO_BOOTMEM=y CONFIG_MEMTEST=y # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_MATOM is not set CONFIG_GENERIC_CPU=y CONFIG_X86_INTERNODE_CACHE_SHIFT=6 CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_TSC=y CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y CONFIG_PROCESSOR_SELECT=y CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y CONFIG_CALGARY_IOMMU=y CONFIG_CALGARY_IOMMU_ENABLED_BY_DEFAULT=y CONFIG_SWIOTLB=y CONFIG_IOMMU_HELPER=y # CONFIG_MAXSMP is not set CONFIG_NR_CPUS=256 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y # CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y # CONFIG_I8K is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_MICROCODE_INTEL_LIB=y CONFIG_MICROCODE_INTEL_EARLY=y CONFIG_MICROCODE_AMD_EARLY=y CONFIG_MICROCODE_EARLY=y # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_ARCH_DMA_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y CONFIG_NUMA=y CONFIG_AMD_NUMA=y CONFIG_X86_64_ACPI_NUMA=y CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_NUMA_EMU is not set CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y CONFIG_SPARSEMEM_VMEMMAP=y CONFIG_HAVE_MEMBLOCK=y CONFIG_HAVE_MEMBLOCK_NODE_MAP=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_MEMORY_ISOLATION=y # CONFIG_MOVABLE_NODE is not set CONFIG_HAVE_BOOTMEM_INFO_NODE=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=999999 CONFIG_COMPACTION=y CONFIG_MIGRATION=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NEED_BOUNCE_POOL=y CONFIG_VIRT_TO_BUS=y CONFIG_MMU_NOTIFIER=y CONFIG_KSM=y CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y CONFIG_MEMORY_FAILURE=y # CONFIG_HWPOISON_INJECT is not set CONFIG_TRANSPARENT_HUGEPAGE=y # CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y CONFIG_CROSS_MEMORY_ATTACH=y CONFIG_CLEANCACHE=y CONFIG_FRONTSWAP=y # CONFIG_ZBUD is not set # CONFIG_ZSWAP is not set # CONFIG_MEM_SOFT_DIRTY is not set # CONFIG_CMA is not set CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y CONFIG_EFI=y CONFIG_EFI_STUB=y CONFIG_SECCOMP=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y CONFIG_CRASH_DUMP=y CONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x1000000 CONFIG_HOTPLUG_CPU=y # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set # CONFIG_DEBUG_HOTPLUG_CPU0 is not set # CONFIG_COMPAT_VDSO is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_USE_PERCPU_NUMA_NODE_ID=y # # Power management and ACPI options # CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="" CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y # CONFIG_PM_AUTOSLEEP is not set # CONFIG_PM_WAKELOCKS is not set CONFIG_PM_RUNTIME=y CONFIG_PM=y CONFIG_PM_DEBUG=y # CONFIG_PM_ADVANCED_DEBUG is not set # CONFIG_PM_TEST_SUSPEND is not set CONFIG_PM_SLEEP_DEBUG=y # CONFIG_PM_TRACE_RTC is not set # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set # CONFIG_ACPI_PROCFS_POWER is not set CONFIG_ACPI_EC_DEBUGFS=m CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=y CONFIG_ACPI_DOCK=y CONFIG_ACPI_I2C=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_HOTPLUG_CPU=y # CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set CONFIG_ACPI_THERMAL=y CONFIG_ACPI_NUMA=y CONFIG_ACPI_CUSTOM_DSDT_FILE="" # CONFIG_ACPI_CUSTOM_DSDT is not set # CONFIG_ACPI_INITRD_TABLE_OVERRIDE is not set CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set # CONFIG_ACPI_PCI_SLOT is not set CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y # CONFIG_ACPI_HOTPLUG_MEMORY is not set # CONFIG_ACPI_SBS is not set CONFIG_ACPI_HED=y # CONFIG_ACPI_CUSTOM_METHOD is not set CONFIG_ACPI_BGRT=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y CONFIG_ACPI_APEI_MEMORY_FAILURE=y # CONFIG_ACPI_APEI_EINJ is not set # CONFIG_ACPI_APEI_ERST_DEBUG is not set CONFIG_SFI=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_GOV_COMMON=y CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y # # x86 CPU frequency scaling drivers # CONFIG_X86_INTEL_PSTATE=y CONFIG_X86_PCC_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ=y CONFIG_X86_ACPI_CPUFREQ_CPB=y CONFIG_X86_POWERNOW_K8=y # CONFIG_X86_AMD_FREQ_SENSITIVITY is not set CONFIG_X86_SPEEDSTEP_CENTRINO=y # CONFIG_X86_P4_CLOCKMOD is not set # # shared options # # CONFIG_X86_SPEEDSTEP_LIB is not set # # CPU Idle # CONFIG_CPU_IDLE=y # CONFIG_CPU_IDLE_MULTIPLE_DRIVERS is not set CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set CONFIG_INTEL_IDLE=y # # Memory power savings # # CONFIG_I7300_IDLE is not set # # Bus options (PCI etc.) # CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_XEN=y CONFIG_PCI_DOMAINS=y # CONFIG_PCI_CNB20LE_QUIRK is not set CONFIG_PCIEPORTBUS=y CONFIG_HOTPLUG_PCI_PCIE=y CONFIG_PCIEAER=y # CONFIG_PCIE_ECRC is not set # CONFIG_PCIEAER_INJECT is not set CONFIG_PCIEASPM=y # CONFIG_PCIEASPM_DEBUG is not set CONFIG_PCIEASPM_DEFAULT=y # CONFIG_PCIEASPM_POWERSAVE is not set # CONFIG_PCIEASPM_PERFORMANCE is not set CONFIG_PCIE_PME=y CONFIG_PCI_MSI=y # CONFIG_PCI_DEBUG is not set CONFIG_PCI_REALLOC_ENABLE_AUTO=y # CONFIG_PCI_STUB is not set # CONFIG_XEN_PCIDEV_FRONTEND is not set CONFIG_HT_IRQ=y CONFIG_PCI_ATS=y CONFIG_PCI_IOV=y CONFIG_PCI_PRI=y CONFIG_PCI_PASID=y CONFIG_PCI_IOAPIC=y CONFIG_PCI_LABEL=y # # PCI host controller drivers # CONFIG_ISA_DMA_API=y CONFIG_AMD_NB=y # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_ACPI is not set CONFIG_HOTPLUG_PCI_CPCI=y # CONFIG_HOTPLUG_PCI_CPCI_ZT5550 is not set # CONFIG_HOTPLUG_PCI_CPCI_GENERIC is not set # CONFIG_HOTPLUG_PCI_SHPC is not set CONFIG_RAPIDIO=y CONFIG_RAPIDIO_TSI721=y CONFIG_RAPIDIO_DISC_TIMEOUT=30 # CONFIG_RAPIDIO_ENABLE_RX_TX_PORTS is not set CONFIG_RAPIDIO_DMA_ENGINE=y # CONFIG_RAPIDIO_DEBUG is not set # CONFIG_RAPIDIO_ENUM_BASIC is not set # # RapidIO Switch drivers # CONFIG_RAPIDIO_TSI57X=y CONFIG_RAPIDIO_CPS_XX=y CONFIG_RAPIDIO_TSI568=y CONFIG_RAPIDIO_CPS_GEN2=y # CONFIG_X86_SYSFB is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_SCRIPT=y # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_COREDUMP=y CONFIG_IA32_EMULATION=y # CONFIG_IA32_AOUT is not set CONFIG_X86_X32=y CONFIG_COMPAT=y CONFIG_COMPAT_FOR_U64_ALIGNMENT=y CONFIG_SYSVIPC_COMPAT=y CONFIG_KEYS_COMPAT=y CONFIG_X86_DEV_DMA_OPS=y CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_DIAG is not set CONFIG_UNIX=y # CONFIG_UNIX_DIAG is not set # CONFIG_XFRM_USER is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y CONFIG_IP_FIB_TRIE_STATS=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y # CONFIG_IP_PNP_BOOTP is not set # CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE_DEMUX is not set # CONFIG_NET_IP_TUNNEL is not set CONFIG_IP_MROUTE=y # CONFIG_IP_MROUTE_MULTIPLE_TABLES is not set CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_LRO=y # CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y # CONFIG_TCP_CONG_BIC is not set CONFIG_TCP_CONG_CUBIC=y # CONFIG_TCP_CONG_WESTWOOD is not set # CONFIG_TCP_CONG_HTCP is not set # CONFIG_TCP_CONG_HSTCP is not set # CONFIG_TCP_CONG_HYBLA is not set # CONFIG_TCP_CONG_VEGAS is not set # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set # CONFIG_TCP_CONG_YEAH is not set # CONFIG_TCP_CONG_ILLINOIS is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y CONFIG_IPV6_ROUTER_PREF=y CONFIG_IPV6_ROUTE_INFO=y # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_TRANSPORT is not set # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_SIT is not set # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_GRE is not set CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_IPV6_SUBTREES=y CONFIG_IPV6_MROUTE=y CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y CONFIG_IPV6_PIMSM_V2=y CONFIG_NETLABEL=y CONFIG_NETWORK_SECMARK=y # CONFIG_NETWORK_PHY_TIMESTAMPING is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # # CONFIG_NETFILTER_NETLINK_ACCT is not set # CONFIG_NETFILTER_NETLINK_QUEUE is not set # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set # CONFIG_IP_VS is not set # # IP: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # # IPv6: Netfilter Configuration # # CONFIG_NF_DEFRAG_IPV6 is not set # CONFIG_IP6_NF_IPTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_L2TP is not set # CONFIG_BRIDGE is not set CONFIG_HAVE_NET_DSA=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_PHONET is not set # CONFIG_IEEE802154 is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # # CONFIG_NET_SCH_CBQ is not set CONFIG_NET_SCH_HTB=m # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set # CONFIG_NET_SCH_MULTIQ is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFB is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set # CONFIG_NET_SCH_DRR is not set # CONFIG_NET_SCH_MQPRIO is not set # CONFIG_NET_SCH_CHOKE is not set # CONFIG_NET_SCH_QFQ is not set CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_FQ_CODEL=m # CONFIG_NET_SCH_INGRESS is not set # CONFIG_NET_SCH_PLUG is not set # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set # CONFIG_NET_CLS_TCINDEX is not set # CONFIG_NET_CLS_ROUTE4 is not set # CONFIG_NET_CLS_FW is not set # CONFIG_NET_CLS_U32 is not set # CONFIG_NET_CLS_RSVP is not set # CONFIG_NET_CLS_RSVP6 is not set # CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_CLS_CGROUP is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 # CONFIG_NET_EMATCH_CMP is not set # CONFIG_NET_EMATCH_NBYTE is not set # CONFIG_NET_EMATCH_U32 is not set # CONFIG_NET_EMATCH_META is not set # CONFIG_NET_EMATCH_TEXT is not set CONFIG_NET_CLS_ACT=y # CONFIG_NET_ACT_POLICE is not set # CONFIG_NET_ACT_GACT is not set # CONFIG_NET_ACT_MIRRED is not set # CONFIG_NET_ACT_NAT is not set # CONFIG_NET_ACT_PEDIT is not set # CONFIG_NET_ACT_SIMP is not set # CONFIG_NET_ACT_SKBEDIT is not set # CONFIG_NET_ACT_CSUM is not set CONFIG_NET_SCH_FIFO=y CONFIG_DCB=y CONFIG_DNS_RESOLVER=y # CONFIG_BATMAN_ADV is not set # CONFIG_OPENVSWITCH is not set # CONFIG_VSOCKETS is not set # CONFIG_NETLINK_MMAP is not set # CONFIG_NETLINK_DIAG is not set # CONFIG_NET_MPLS_GSO is not set CONFIG_RPS=y CONFIG_RFS_ACCEL=y CONFIG_XPS=y # CONFIG_NETPRIO_CGROUP is not set CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y CONFIG_BPF_JIT=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_NET_DROP_MONITOR is not set CONFIG_HAMRADIO=y # # Packet Radio protocols # # CONFIG_AX25 is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m CONFIG_BT_BNEP_MC_FILTER=y CONFIG_BT_BNEP_PROTO_FILTER=y # CONFIG_BT_HIDP is not set # # Bluetooth device drivers # CONFIG_BT_HCIBTUSB=m # CONFIG_BT_HCIBTSDIO is not set # CONFIG_BT_HCIUART is not set # CONFIG_BT_HCIBCM203X is not set # CONFIG_BT_HCIBPA10X is not set # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_BT_MRVL is not set # CONFIG_BT_ATH3K is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WEXT_CORE=y CONFIG_WEXT_PROC=y CONFIG_CFG80211=m CONFIG_NL80211_TESTMODE=y # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set # CONFIG_CFG80211_REG_DEBUG is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set CONFIG_CFG80211_DEFAULT_PS=y CONFIG_CFG80211_DEBUGFS=y # CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_WEXT=y # CONFIG_LIB80211 is not set CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_MINSTREL=y CONFIG_MAC80211_RC_MINSTREL_HT=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y CONFIG_MAC80211_LEDS=y CONFIG_MAC80211_DEBUGFS=y # CONFIG_MAC80211_MESSAGE_TRACING is not set # CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set CONFIG_RFKILL=y CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y # CONFIG_RFKILL_REGULATOR is not set # CONFIG_NET_9P is not set # CONFIG_CAIF is not set # CONFIG_CEPH_LIB is not set # CONFIG_NFC is not set CONFIG_HAVE_BPF_JIT=y # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set CONFIG_SYS_HYPERVISOR=y # CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_REGMAP=y CONFIG_REGMAP_I2C=y CONFIG_REGMAP_SPI=y CONFIG_REGMAP_IRQ=y CONFIG_DMA_SHARED_BUFFER=y # # Bus devices # CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y # CONFIG_MTD is not set CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_SERIAL is not set CONFIG_PARPORT_PC_FIFO=y # CONFIG_PARPORT_PC_SUPERIO is not set # CONFIG_PARPORT_GSC is not set # CONFIG_PARPORT_AX88796 is not set CONFIG_PARPORT_1284=y CONFIG_PNP=y # CONFIG_PNP_DEBUG_MESSAGES is not set # # Protocols # CONFIG_PNPACPI=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set # CONFIG_PARIDE is not set # CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NVME is not set # CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=65536 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_XEN_BLKDEV_FRONTEND=y # CONFIG_XEN_BLKDEV_BACKEND is not set CONFIG_VIRTIO_BLK=y # CONFIG_BLK_DEV_HD is not set # CONFIG_BLK_DEV_RBD is not set # CONFIG_BLK_DEV_RSXX is not set # CONFIG_BLOCKCONSOLE is not set # # Misc devices # # CONFIG_SENSORS_LIS3LV02D is not set # CONFIG_AD525X_DPOT is not set # CONFIG_DUMMY_IRQ is not set # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # CONFIG_ICS932S401 is not set # CONFIG_ATMEL_SSC is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set # CONFIG_APDS9802ALS is not set # CONFIG_ISL29003 is not set # CONFIG_ISL29020 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_SENSORS_BH1780 is not set # CONFIG_SENSORS_BH1770 is not set # CONFIG_SENSORS_APDS990X is not set # CONFIG_HMC6352 is not set # CONFIG_DS1682 is not set # CONFIG_TI_DAC7512 is not set # CONFIG_VMWARE_BALLOON is not set # CONFIG_BMP085_I2C is not set # CONFIG_BMP085_SPI is not set # CONFIG_PCH_PHUB is not set # CONFIG_USB_SWITCH_FSA9480 is not set # CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set # CONFIG_C2PORT is not set # # EEPROM support # # CONFIG_EEPROM_AT24 is not set # CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_EEPROM_93XX46 is not set # CONFIG_CB710_CORE is not set # # Texas Instruments shared transport line discipline # # CONFIG_TI_ST is not set # CONFIG_SENSORS_LIS3_I2C is not set # # Altera FPGA firmware download module # # CONFIG_ALTERA_STAPL is not set CONFIG_INTEL_MEI=y CONFIG_INTEL_MEI_ME=y # CONFIG_VMWARE_VMCI is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set CONFIG_BLK_DEV_SR=y # CONFIG_BLK_DEV_SR_VENDOR is not set CONFIG_CHR_DEV_SG=y # CONFIG_CHR_DEV_SCH is not set CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_ISCSI_BOOT_SYSFS is not set # CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_SCSI_CXGB4_ISCSI is not set # CONFIG_SCSI_BNX2_ISCSI is not set # CONFIG_SCSI_BNX2X_FCOE is not set # CONFIG_BE2ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_HPSA is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_3W_SAS is not set # CONFIG_SCSI_ACARD is not set # CONFIG_SCSI_AACRAID is not set # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_MVUMI is not set # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set # CONFIG_SCSI_ARCMSR is not set CONFIG_MEGARAID_NEWGEN=y # CONFIG_MEGARAID_MM is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_MPT3SAS is not set # CONFIG_SCSI_UFSHCD is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_VMWARE_PVSCSI is not set # CONFIG_LIBFC is not set # CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_FCOE_FNIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_GDTH is not set # CONFIG_SCSI_ISCI is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_PPA is not set # CONFIG_SCSI_IMM is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_PMCRAID is not set # CONFIG_SCSI_PM8001 is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_BFA_FC is not set # CONFIG_SCSI_VIRTIO is not set # CONFIG_SCSI_CHELSIO_FCOE is not set # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_VERBOSE_ERROR=y CONFIG_ATA_ACPI=y # CONFIG_SATA_ZPODD is not set CONFIG_SATA_PMP=y # # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y # CONFIG_SATA_AHCI_PLATFORM is not set # CONFIG_SATA_INIC162X is not set # CONFIG_SATA_ACARD_AHCI is not set # CONFIG_SATA_SIL24 is not set CONFIG_ATA_SFF=y # # SFF controllers with custom DMA interface # # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_SX4 is not set CONFIG_ATA_BMDMA=y # # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y # CONFIG_SATA_HIGHBANK is not set # CONFIG_SATA_MV is not set # CONFIG_SATA_NV is not set # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_RCAR is not set # CONFIG_SATA_SIL is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_SVW is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # # PATA SFF controllers with BMDMA # # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARASAN_CF is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_ATP867X is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set # CONFIG_PATA_CS5530 is not set # CONFIG_PATA_CS5536 is not set # CONFIG_PATA_CYPRESS is not set # CONFIG_PATA_EFAR is not set # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set # CONFIG_PATA_HPT3X2N is not set # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_IT8213 is not set # CONFIG_PATA_IT821X is not set # CONFIG_PATA_JMICRON is not set # CONFIG_PATA_MARVELL is not set # CONFIG_PATA_NETCELL is not set # CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RDC is not set # CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SCH is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_SIL680 is not set CONFIG_PATA_SIS=y # CONFIG_PATA_TOSHIBA is not set # CONFIG_PATA_TRIFLEX is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # # PIO-only SFF controllers # # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_NS87410 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_PATA_RZ1000 is not set # # Generic fallback / legacy drivers # CONFIG_PATA_ACPI=y CONFIG_ATA_GENERIC=y # CONFIG_PATA_LEGACY is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_AUTODETECT=y # CONFIG_MD_LINEAR is not set # CONFIG_MD_RAID0 is not set # CONFIG_MD_RAID1 is not set # CONFIG_MD_RAID10 is not set # CONFIG_MD_RAID456 is not set # CONFIG_MD_MULTIPATH is not set # CONFIG_MD_FAULTY is not set # CONFIG_BCACHE is not set CONFIG_BLK_DEV_DM=y # CONFIG_DM_DEBUG is not set # CONFIG_DM_CRYPT is not set # CONFIG_DM_SNAPSHOT is not set # CONFIG_DM_THIN_PROVISIONING is not set # CONFIG_DM_CACHE is not set # CONFIG_DM_MIRROR is not set # CONFIG_DM_RAID is not set # CONFIG_DM_ZERO is not set # CONFIG_DM_MULTIPATH is not set # CONFIG_DM_DELAY is not set CONFIG_DM_UEVENT=y # CONFIG_DM_FLAKEY is not set # CONFIG_DM_VERITY is not set # CONFIG_DM_SWITCH is not set # CONFIG_TARGET_CORE is not set CONFIG_FUSION=y # CONFIG_FUSION_SPI is not set # CONFIG_FUSION_FC is not set # CONFIG_FUSION_SAS is not set CONFIG_FUSION_MAX_SGE=128 CONFIG_FUSION_LOGGING=y # # IEEE 1394 (FireWire) support # # CONFIG_FIREWIRE is not set # CONFIG_FIREWIRE_NOSY is not set # CONFIG_I2O is not set CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=m CONFIG_NETDEVICES=y CONFIG_MII=m CONFIG_NET_CORE=y # CONFIG_BONDING is not set # CONFIG_DUMMY is not set # CONFIG_EQUALIZER is not set CONFIG_NET_FC=y # CONFIG_IFB is not set # CONFIG_NET_TEAM is not set # CONFIG_MACVLAN is not set # CONFIG_VXLAN is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_RIONET is not set CONFIG_TUN=y # CONFIG_VETH is not set CONFIG_VIRTIO_NET=y # CONFIG_NLMON is not set # CONFIG_ARCNET is not set # # CAIF transport drivers # # CONFIG_VHOST_NET is not set # # Distributed Switch Architecture drivers # # CONFIG_NET_DSA_MV88E6XXX is not set # CONFIG_NET_DSA_MV88E6060 is not set # CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set # CONFIG_NET_DSA_MV88E6131 is not set # CONFIG_NET_DSA_MV88E6123_61_65 is not set CONFIG_ETHERNET=y CONFIG_NET_VENDOR_3COM=y # CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_NET_VENDOR_ADAPTEC=y # CONFIG_ADAPTEC_STARFIRE is not set CONFIG_NET_VENDOR_ALTEON=y # CONFIG_ACENIC is not set CONFIG_NET_VENDOR_AMD=y # CONFIG_AMD8111_ETH is not set # CONFIG_PCNET32 is not set CONFIG_NET_VENDOR_ARC=y CONFIG_NET_VENDOR_ATHEROS=y # CONFIG_ATL2 is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set # CONFIG_ATL1C is not set # CONFIG_ALX is not set CONFIG_NET_CADENCE=y # CONFIG_ARM_AT91_ETHER is not set # CONFIG_MACB is not set CONFIG_NET_VENDOR_BROADCOM=y # CONFIG_B44 is not set # CONFIG_BNX2 is not set # CONFIG_CNIC is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2X is not set CONFIG_NET_VENDOR_BROCADE=y # CONFIG_BNA is not set # CONFIG_NET_CALXEDA_XGMAC is not set CONFIG_NET_VENDOR_CHELSIO=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set # CONFIG_CHELSIO_T4 is not set # CONFIG_CHELSIO_T4VF is not set CONFIG_NET_VENDOR_CISCO=y # CONFIG_ENIC is not set # CONFIG_DNET is not set CONFIG_NET_VENDOR_DEC=y CONFIG_NET_TULIP=y # CONFIG_DE2104X is not set # CONFIG_TULIP is not set # CONFIG_DE4X5 is not set # CONFIG_WINBOND_840 is not set # CONFIG_DM9102 is not set # CONFIG_ULI526X is not set CONFIG_NET_VENDOR_DLINK=y # CONFIG_DL2K is not set # CONFIG_SUNDANCE is not set CONFIG_NET_VENDOR_EMULEX=y # CONFIG_BE2NET is not set CONFIG_NET_VENDOR_EXAR=y # CONFIG_S2IO is not set # CONFIG_VXGE is not set CONFIG_NET_VENDOR_HP=y # CONFIG_HP100 is not set CONFIG_NET_VENDOR_INTEL=y # CONFIG_E100 is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set # CONFIG_IGB is not set # CONFIG_IGBVF is not set # CONFIG_IXGB is not set # CONFIG_IXGBE is not set # CONFIG_IXGBEVF is not set CONFIG_NET_VENDOR_I825XX=y # CONFIG_IP1000 is not set # CONFIG_JME is not set CONFIG_NET_VENDOR_MARVELL=y # CONFIG_MVMDIO is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_NET_VENDOR_MELLANOX=y # CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_MLX5_CORE is not set CONFIG_NET_VENDOR_MICREL=y # CONFIG_KS8842 is not set # CONFIG_KS8851 is not set # CONFIG_KS8851_MLL is not set # CONFIG_KSZ884X_PCI is not set CONFIG_NET_VENDOR_MICROCHIP=y # CONFIG_ENC28J60 is not set CONFIG_NET_VENDOR_MYRI=y # CONFIG_MYRI10GE is not set # CONFIG_FEALNX is not set CONFIG_NET_VENDOR_NATSEMI=y # CONFIG_NATSEMI is not set # CONFIG_NS83820 is not set CONFIG_NET_VENDOR_8390=y # CONFIG_NE2K_PCI is not set CONFIG_NET_VENDOR_NVIDIA=y # CONFIG_FORCEDETH is not set CONFIG_NET_VENDOR_OKI=y # CONFIG_PCH_GBE is not set # CONFIG_ETHOC is not set CONFIG_NET_PACKET_ENGINE=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_NET_VENDOR_QLOGIC=y # CONFIG_QLA3XXX is not set # CONFIG_QLCNIC is not set # CONFIG_QLGE is not set # CONFIG_NETXEN_NIC is not set CONFIG_NET_VENDOR_REALTEK=y # CONFIG_ATP is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set CONFIG_R8169=m # CONFIG_SH_ETH is not set CONFIG_NET_VENDOR_RDC=y # CONFIG_R6040 is not set CONFIG_NET_VENDOR_SEEQ=y CONFIG_NET_VENDOR_SILAN=y # CONFIG_SC92031 is not set CONFIG_NET_VENDOR_SIS=y # CONFIG_SIS900 is not set # CONFIG_SIS190 is not set # CONFIG_SFC is not set CONFIG_NET_VENDOR_SMSC=y # CONFIG_EPIC100 is not set # CONFIG_SMSC911X is not set # CONFIG_SMSC9420 is not set CONFIG_NET_VENDOR_STMICRO=y # CONFIG_STMMAC_ETH is not set CONFIG_NET_VENDOR_SUN=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NIU is not set CONFIG_NET_VENDOR_TEHUTI=y # CONFIG_TEHUTI is not set CONFIG_NET_VENDOR_TI=y # CONFIG_TLAN is not set CONFIG_NET_VENDOR_VIA=y # CONFIG_VIA_RHINE is not set # CONFIG_VIA_VELOCITY is not set CONFIG_NET_VENDOR_WIZNET=y # CONFIG_WIZNET_W5100 is not set # CONFIG_WIZNET_W5300 is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set # CONFIG_SKFP is not set # CONFIG_HIPPI is not set # CONFIG_NET_SB1000 is not set CONFIG_PHYLIB=y # # MII PHY device drivers # CONFIG_AT803X_PHY=y CONFIG_AMD_PHY=y CONFIG_MARVELL_PHY=y CONFIG_DAVICOM_PHY=y CONFIG_QSEMI_PHY=y CONFIG_LXT_PHY=y CONFIG_CICADA_PHY=y CONFIG_VITESSE_PHY=y CONFIG_SMSC_PHY=y CONFIG_BROADCOM_PHY=y CONFIG_BCM87XX_PHY=y CONFIG_ICPLUS_PHY=y CONFIG_REALTEK_PHY=y CONFIG_NATIONAL_PHY=y CONFIG_STE10XP=y CONFIG_LSI_ET1011C_PHY=y CONFIG_MICREL_PHY=y CONFIG_FIXED_PHY=y CONFIG_MDIO_BITBANG=y CONFIG_MDIO_GPIO=y # CONFIG_MICREL_KS8995MA is not set # CONFIG_PLIP is not set CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_DEFLATE is not set CONFIG_PPP_FILTER=y # CONFIG_PPP_MPPE is not set CONFIG_PPP_MULTILINK=y # CONFIG_PPPOE is not set # CONFIG_PPP_ASYNC is not set # CONFIG_PPP_SYNC_TTY is not set # CONFIG_SLIP is not set CONFIG_SLHC=y # # USB Network Adapters # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_RTL8152 is not set # CONFIG_USB_USBNET is not set # CONFIG_USB_HSO is not set # CONFIG_USB_IPHETH is not set CONFIG_WLAN=y # CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_AIRO is not set # CONFIG_ATMEL is not set # CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set # CONFIG_RTL8180 is not set # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set # CONFIG_MWL8K is not set # CONFIG_ATH_CARDS is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_BRCMFMAC is not set # CONFIG_HOSTAP is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set CONFIG_IWLWIFI=m CONFIG_IWLDVM=m # CONFIG_IWLMVM is not set CONFIG_IWLWIFI_OPMODE_MODULAR=y # # Debugging Options # CONFIG_IWLWIFI_DEBUG=y CONFIG_IWLWIFI_DEBUGFS=y # CONFIG_IWLWIFI_DEBUG_EXPERIMENTAL_UCODE is not set CONFIG_IWLWIFI_DEVICE_TRACING=y # CONFIG_IWL4965 is not set # CONFIG_IWL3945 is not set # CONFIG_LIBERTAS is not set # CONFIG_HERMES is not set # CONFIG_P54_COMMON is not set # CONFIG_RT2X00 is not set CONFIG_RTL_CARDS=m # CONFIG_RTL8192CE is not set # CONFIG_RTL8192SE is not set # CONFIG_RTL8192DE is not set # CONFIG_RTL8723AE is not set # CONFIG_RTL8188EE is not set # CONFIG_RTL8192CU is not set CONFIG_WL_TI=y # CONFIG_WL1251 is not set # CONFIG_WL12XX is not set # CONFIG_WL18XX is not set # CONFIG_WLCORE is not set # CONFIG_ZD1211RW is not set # CONFIG_MWIFIEX is not set # CONFIG_CW1200 is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers # CONFIG_WAN=y # CONFIG_HDLC is not set # CONFIG_DLCI is not set # CONFIG_SBNI is not set CONFIG_XEN_NETDEV_FRONTEND=y # CONFIG_XEN_NETDEV_BACKEND is not set # CONFIG_VMXNET3 is not set CONFIG_ISDN=y # CONFIG_ISDN_I4L is not set # CONFIG_ISDN_CAPI is not set # CONFIG_ISDN_DRV_GIGASET is not set # CONFIG_HYSDN is not set # CONFIG_MISDN is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set # CONFIG_INPUT_SPARSEKMAP is not set # CONFIG_INPUT_MATRIXKMAP is not set # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_INPUT_JOYDEV=m CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ADP5520 is not set # CONFIG_KEYBOARD_ADP5588 is not set # CONFIG_KEYBOARD_ADP5589 is not set CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_QT1070 is not set # CONFIG_KEYBOARD_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_GPIO_POLLED is not set # CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_TCA8418 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_LM8333 is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_MCS is not set # CONFIG_KEYBOARD_MPR121 is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_STMPE is not set # CONFIG_KEYBOARD_TC3589X is not set # CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_CYAPA is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_MOUSE_GPIO is not set # CONFIG_MOUSE_SYNAPTICS_I2C is not set # CONFIG_MOUSE_SYNAPTICS_USB is not set CONFIG_INPUT_JOYSTICK=y # CONFIG_JOYSTICK_ANALOG is not set # CONFIG_JOYSTICK_A3D is not set # CONFIG_JOYSTICK_ADI is not set # CONFIG_JOYSTICK_COBRA is not set # CONFIG_JOYSTICK_GF2K is not set # CONFIG_JOYSTICK_GRIP is not set # CONFIG_JOYSTICK_GRIP_MP is not set # CONFIG_JOYSTICK_GUILLEMOT is not set # CONFIG_JOYSTICK_INTERACT is not set # CONFIG_JOYSTICK_SIDEWINDER is not set # CONFIG_JOYSTICK_TMDC is not set # CONFIG_JOYSTICK_IFORCE is not set # CONFIG_JOYSTICK_WARRIOR is not set # CONFIG_JOYSTICK_MAGELLAN is not set # CONFIG_JOYSTICK_SPACEORB is not set # CONFIG_JOYSTICK_SPACEBALL is not set # CONFIG_JOYSTICK_STINGER is not set # CONFIG_JOYSTICK_TWIDJOY is not set # CONFIG_JOYSTICK_ZHENHUA is not set # CONFIG_JOYSTICK_DB9 is not set # CONFIG_JOYSTICK_GAMECON is not set # CONFIG_JOYSTICK_TURBOGRAFX is not set # CONFIG_JOYSTICK_AS5011 is not set # CONFIG_JOYSTICK_JOYDUMP is not set # CONFIG_JOYSTICK_XPAD is not set # CONFIG_JOYSTICK_WALKERA0701 is not set CONFIG_INPUT_TABLET=y # CONFIG_TABLET_USB_ACECAD is not set # CONFIG_TABLET_USB_AIPTEK is not set # CONFIG_TABLET_USB_GTCO is not set # CONFIG_TABLET_USB_HANWANG is not set # CONFIG_TABLET_USB_KBTAB is not set # CONFIG_TABLET_USB_WACOM is not set CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_88PM860X is not set # CONFIG_TOUCHSCREEN_ADS7846 is not set # CONFIG_TOUCHSCREEN_AD7877 is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_ATMEL_MXT is not set # CONFIG_TOUCHSCREEN_AUO_PIXCIR is not set # CONFIG_TOUCHSCREEN_BU21013 is not set # CONFIG_TOUCHSCREEN_CY8CTMG110 is not set # CONFIG_TOUCHSCREEN_CYTTSP_CORE is not set # CONFIG_TOUCHSCREEN_CYTTSP4_CORE is not set # CONFIG_TOUCHSCREEN_DA9034 is not set # CONFIG_TOUCHSCREEN_DA9052 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set # CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_ILI210X is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_WACOM_I2C is not set # CONFIG_TOUCHSCREEN_MAX11801 is not set # CONFIG_TOUCHSCREEN_MCS5000 is not set # CONFIG_TOUCHSCREEN_MMS114 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_EDT_FT5X06 is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_PIXCIR is not set # CONFIG_TOUCHSCREEN_WM831X is not set # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_TOUCHSCREEN_TSC_SERIO is not set # CONFIG_TOUCHSCREEN_TSC2005 is not set # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_PCAP is not set # CONFIG_TOUCHSCREEN_ST1232 is not set # CONFIG_TOUCHSCREEN_STMPE is not set # CONFIG_TOUCHSCREEN_TPS6507X is not set CONFIG_INPUT_MISC=y # CONFIG_INPUT_88PM860X_ONKEY is not set # CONFIG_INPUT_AD714X is not set # CONFIG_INPUT_BMA150 is not set # CONFIG_INPUT_PCSPKR is not set # CONFIG_INPUT_MAX8925_ONKEY is not set # CONFIG_INPUT_MMA8450 is not set # CONFIG_INPUT_MPU3050 is not set # CONFIG_INPUT_APANEL is not set # CONFIG_INPUT_GP2A is not set # CONFIG_INPUT_GPIO_TILT_POLLED is not set # CONFIG_INPUT_ATLAS_BTNS is not set # CONFIG_INPUT_ATI_REMOTE2 is not set # CONFIG_INPUT_KEYSPAN_REMOTE is not set # CONFIG_INPUT_KXTJ9 is not set # CONFIG_INPUT_POWERMATE is not set # CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_CM109 is not set # CONFIG_INPUT_TWL6040_VIBRA is not set CONFIG_INPUT_UINPUT=y # CONFIG_INPUT_PCF8574 is not set # CONFIG_INPUT_PWM_BEEPER is not set # CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set # CONFIG_INPUT_DA9052_ONKEY is not set # CONFIG_INPUT_DA9055_ONKEY is not set # CONFIG_INPUT_WM831X_ON is not set # CONFIG_INPUT_PCAP is not set # CONFIG_INPUT_ADXL34X is not set # CONFIG_INPUT_IMS_PCU is not set # CONFIG_INPUT_CMA3000 is not set # CONFIG_INPUT_XEN_KBDDEV_FRONTEND is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_PARKBD is not set # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=m # CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_SERIO_PS2MULT is not set # CONFIG_SERIO_ARC_PS2 is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_TTY=y CONFIG_VT=y CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=0 CONFIG_SERIAL_NONSTANDARD=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set # CONFIG_NOZOMI is not set # CONFIG_ISI is not set # CONFIG_N_HDLC is not set # CONFIG_N_GSM is not set # CONFIG_TRACE_SINK is not set # CONFIG_DEVKMEM is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y CONFIG_SERIAL_8250_PNP=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=48 CONFIG_SERIAL_8250_RUNTIME_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_8250_DETECT_IRQ is not set CONFIG_SERIAL_8250_RSA=y # CONFIG_SERIAL_8250_DW is not set # # Non-8250 serial port support # CONFIG_SERIAL_KGDB_NMI=y # CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_MAX310X=y # CONFIG_SERIAL_MFD_HSU is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_CONSOLE_POLL=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_SCCNXP=y CONFIG_SERIAL_SCCNXP_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set # CONFIG_SERIAL_ALTERA_JTAGUART is not set # CONFIG_SERIAL_ALTERA_UART is not set # CONFIG_SERIAL_IFX6X60 is not set # CONFIG_SERIAL_PCH_UART is not set # CONFIG_SERIAL_ARC is not set # CONFIG_SERIAL_RP2 is not set # CONFIG_SERIAL_FSL_LPUART is not set # CONFIG_SERIAL_ST_ASC is not set CONFIG_TTY_PRINTK=y CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set CONFIG_PPDEV=m CONFIG_HVC_DRIVER=y CONFIG_HVC_IRQ=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y # CONFIG_VIRTIO_CONSOLE is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_HW_RANDOM_TIMERIOMEM is not set # CONFIG_HW_RANDOM_INTEL is not set # CONFIG_HW_RANDOM_AMD is not set # CONFIG_HW_RANDOM_VIA is not set # CONFIG_HW_RANDOM_VIRTIO is not set # CONFIG_HW_RANDOM_TPM is not set # CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set CONFIG_HPET=y CONFIG_HPET_MMAP=y # CONFIG_HANGCHECK_TIMER is not set CONFIG_TCG_TPM=y # CONFIG_TCG_TIS is not set # CONFIG_TCG_TIS_I2C_INFINEON is not set # CONFIG_TCG_NSC is not set # CONFIG_TCG_ATMEL is not set # CONFIG_TCG_INFINEON is not set # CONFIG_TCG_ST33_I2C is not set # CONFIG_TELCLOCK is not set CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_COMPAT=y # CONFIG_I2C_CHARDEV is not set # CONFIG_I2C_MUX is not set CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support # # # PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set # CONFIG_I2C_ISCH is not set # CONFIG_I2C_ISMT is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # # ACPI drivers # # CONFIG_I2C_SCMI is not set # # I2C system bus drivers (mostly embedded / system-on-chip) # # CONFIG_I2C_CBUS_GPIO is not set # CONFIG_I2C_DESIGNWARE_PCI is not set # CONFIG_I2C_EG20T is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_PXA_PCI is not set # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers # # CONFIG_I2C_DIOLAN_U2C is not set # CONFIG_I2C_PARPORT is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers # # CONFIG_I2C_STUB is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y # # SPI Master Controller Drivers # # CONFIG_SPI_ALTERA is not set # CONFIG_SPI_BITBANG is not set # CONFIG_SPI_BUTTERFLY is not set # CONFIG_SPI_GPIO is not set # CONFIG_SPI_LM70_LLP is not set # CONFIG_SPI_OC_TINY is not set # CONFIG_SPI_PXA2XX is not set # CONFIG_SPI_PXA2XX_PCI is not set # CONFIG_SPI_SC18IS602 is not set # CONFIG_SPI_TOPCLIFF_PCH is not set # CONFIG_SPI_XCOMM is not set # CONFIG_SPI_XILINX is not set # CONFIG_SPI_DESIGNWARE is not set # # SPI Protocol Masters # # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_HSI is not set # # PPS support # # CONFIG_PPS is not set # # PPS generators support # # # PTP clock support # # CONFIG_PTP_1588_CLOCK is not set # # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. # # CONFIG_PTP_1588_CLOCK_PCH is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y CONFIG_GPIO_DEVRES=y CONFIG_GPIOLIB=y CONFIG_GPIO_ACPI=y # CONFIG_DEBUG_GPIO is not set # CONFIG_GPIO_SYSFS is not set # CONFIG_GPIO_DA9052 is not set # CONFIG_GPIO_DA9055 is not set # # Memory mapped GPIO drivers: # # CONFIG_GPIO_GENERIC_PLATFORM is not set # CONFIG_GPIO_IT8761E is not set # CONFIG_GPIO_TS5500 is not set # CONFIG_GPIO_SCH is not set # CONFIG_GPIO_ICH is not set # CONFIG_GPIO_VX855 is not set # CONFIG_GPIO_LYNXPOINT is not set # # I2C GPIO expanders: # # CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set CONFIG_GPIO_RC5T583=y CONFIG_GPIO_SX150X=y CONFIG_GPIO_STMPE=y CONFIG_GPIO_TC3589X=y # CONFIG_GPIO_TPS65912 is not set # CONFIG_GPIO_TWL6040 is not set # CONFIG_GPIO_WM831X is not set # CONFIG_GPIO_WM8350 is not set # CONFIG_GPIO_WM8994 is not set # CONFIG_GPIO_ADP5520 is not set # CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: # # CONFIG_GPIO_BT8XX is not set # CONFIG_GPIO_AMD8111 is not set CONFIG_GPIO_LANGWELL=y # CONFIG_GPIO_PCH is not set # CONFIG_GPIO_ML_IOH is not set # CONFIG_GPIO_RDC321X is not set # # SPI GPIO expanders: # # CONFIG_GPIO_MAX7301 is not set # CONFIG_GPIO_MCP23S08 is not set # CONFIG_GPIO_MC33880 is not set # CONFIG_GPIO_74X164 is not set # # AC97 GPIO expanders: # # # LPC GPIO expanders: # # # MODULbus GPIO expanders: # # CONFIG_GPIO_PALMAS is not set CONFIG_GPIO_TPS6586X=y CONFIG_GPIO_TPS65910=y # # USB GPIO expanders: # # CONFIG_W1 is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PDA_POWER is not set # CONFIG_MAX8925_POWER is not set # CONFIG_WM831X_BACKUP is not set # CONFIG_WM831X_POWER is not set # CONFIG_WM8350_POWER is not set # CONFIG_TEST_POWER is not set # CONFIG_BATTERY_88PM860X is not set # CONFIG_BATTERY_DS2780 is not set # CONFIG_BATTERY_DS2781 is not set # CONFIG_BATTERY_DS2782 is not set # CONFIG_BATTERY_SBS is not set # CONFIG_BATTERY_BQ27x00 is not set # CONFIG_BATTERY_DA9030 is not set # CONFIG_BATTERY_DA9052 is not set # CONFIG_BATTERY_MAX17040 is not set # CONFIG_BATTERY_MAX17042 is not set # CONFIG_CHARGER_MAX8903 is not set # CONFIG_CHARGER_LP8727 is not set # CONFIG_CHARGER_GPIO is not set CONFIG_CHARGER_MANAGER=y # CONFIG_CHARGER_BQ2415X is not set # CONFIG_CHARGER_SMB347 is not set # CONFIG_CHARGER_TPS65090 is not set # CONFIG_POWER_RESET is not set CONFIG_POWER_AVS=y CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Native drivers # # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7314 is not set # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7310 is not set # CONFIG_SENSORS_ADT7410 is not set # CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_K8TEMP is not set # CONFIG_SENSORS_K10TEMP is not set # CONFIG_SENSORS_FAM15H_POWER is not set # CONFIG_SENSORS_ASB100 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS620 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_DA9052_ADC is not set # CONFIG_SENSORS_DA9055 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_FSCHMD is not set # CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_G762 is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_GPIO_FAN is not set # CONFIG_SENSORS_HIH6130 is not set CONFIG_SENSORS_CORETEMP=m # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_JC42 is not set # CONFIG_SENSORS_LINEAGE is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set # CONFIG_SENSORS_LM85 is not set # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_LTC4151 is not set # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LTC4261 is not set # CONFIG_SENSORS_LM95234 is not set # CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_LM95245 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX16065 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX1668 is not set # CONFIG_SENSORS_MAX197 is not set # CONFIG_SENSORS_MAX6639 is not set # CONFIG_SENSORS_MAX6642 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_MAX6697 is not set # CONFIG_SENSORS_MCP3021 is not set # CONFIG_SENSORS_NCT6775 is not set # CONFIG_SENSORS_NTC_THERMISTOR is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_PMBUS is not set # CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SHT21 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMM665 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_EMC1403 is not set # CONFIG_SENSORS_EMC2103 is not set # CONFIG_SENSORS_EMC6W201 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_SCH56XX_COMMON is not set # CONFIG_SENSORS_SCH5627 is not set # CONFIG_SENSORS_SCH5636 is not set # CONFIG_SENSORS_ADS1015 is not set # CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_INA209 is not set # CONFIG_SENSORS_INA2XX is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP102 is not set # CONFIG_SENSORS_TMP401 is not set # CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VIA_CPUTEMP is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83795 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_SENSORS_WM831X is not set # CONFIG_SENSORS_WM8350 is not set # CONFIG_SENSORS_APPLESMC is not set # # ACPI drivers # # CONFIG_SENSORS_ACPI_POWER is not set # CONFIG_SENSORS_ATK0110 is not set CONFIG_THERMAL=y CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set # CONFIG_THERMAL_GOV_FAIR_SHARE is not set CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_USER_SPACE=y CONFIG_CPU_THERMAL=y # CONFIG_THERMAL_EMULATION is not set # CONFIG_INTEL_POWERCLAMP is not set CONFIG_X86_PKG_TEMP_THERMAL=m # # Texas Instruments thermal drivers # CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_DA9052_WATCHDOG is not set # CONFIG_DA9055_WATCHDOG is not set # CONFIG_WM831X_WATCHDOG is not set # CONFIG_WM8350_WATCHDOG is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_F71808E_WDT is not set # CONFIG_SP5100_TCO is not set # CONFIG_SC520_WDT is not set # CONFIG_SBC_FITPC2_WATCHDOG is not set # CONFIG_EUROTECH_WDT is not set # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set # CONFIG_IE6XX_WDT is not set # CONFIG_ITCO_WDT is not set # CONFIG_IT8712F_WDT is not set # CONFIG_IT87_WDT is not set # CONFIG_HP_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_PC87413_WDT is not set # CONFIG_NV_TCO is not set # CONFIG_60XX_WDT is not set # CONFIG_SBC8360_WDT is not set # CONFIG_CPU5_WDT is not set # CONFIG_SMSC_SCH311X_WDT is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_VIA_WDT is not set # CONFIG_W83627HF_WDT is not set # CONFIG_W83697HF_WDT is not set # CONFIG_W83697UG_WDT is not set # CONFIG_W83877F_WDT is not set # CONFIG_W83977F_WDT is not set # CONFIG_MACHZ_WDT is not set # CONFIG_SBC_EPX_C3_WATCHDOG is not set # CONFIG_MEN_A21_WDT is not set # CONFIG_XEN_WDT is not set # # PCI-based Watchdog Cards # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # # CONFIG_SSB is not set CONFIG_BCMA_POSSIBLE=y # # Broadcom specific AMBA # # CONFIG_BCMA is not set # # Multifunction device drivers # CONFIG_MFD_CORE=y # CONFIG_MFD_CS5535 is not set # CONFIG_MFD_AS3711 is not set CONFIG_PMIC_ADP5520=y CONFIG_MFD_AAT2870_CORE=y # CONFIG_MFD_CROS_EC is not set CONFIG_PMIC_DA903X=y CONFIG_PMIC_DA9052=y CONFIG_MFD_DA9052_SPI=y CONFIG_MFD_DA9052_I2C=y CONFIG_MFD_DA9055=y # CONFIG_MFD_DA9063 is not set # CONFIG_MFD_MC13XXX_SPI is not set # CONFIG_MFD_MC13XXX_I2C is not set # CONFIG_HTC_PASIC3 is not set CONFIG_HTC_I2CPLD=y CONFIG_LPC_ICH=m # CONFIG_LPC_SCH is not set # CONFIG_MFD_JANZ_CMODIO is not set # CONFIG_MFD_KEMPLD is not set # CONFIG_MFD_88PM800 is not set # CONFIG_MFD_88PM805 is not set CONFIG_MFD_88PM860X=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX77693=y # CONFIG_MFD_MAX8907 is not set CONFIG_MFD_MAX8925=y CONFIG_MFD_MAX8997=y CONFIG_MFD_MAX8998=y CONFIG_EZX_PCAP=y # CONFIG_MFD_VIPERBOARD is not set # CONFIG_MFD_RETU is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_RDC321X is not set # CONFIG_MFD_RTSX_PCI is not set CONFIG_MFD_RC5T583=y CONFIG_MFD_SEC_CORE=y # CONFIG_MFD_SI476X_CORE is not set # CONFIG_MFD_SM501 is not set CONFIG_MFD_SMSC=y CONFIG_ABX500_CORE=y CONFIG_AB3100_CORE=y # CONFIG_AB3100_OTP is not set CONFIG_MFD_STMPE=y # # STMicroelectronics STMPE Interface Drivers # CONFIG_STMPE_I2C=y CONFIG_STMPE_SPI=y # CONFIG_MFD_SYSCON is not set # CONFIG_MFD_TI_AM335X_TSCADC is not set CONFIG_MFD_LP8788=y CONFIG_MFD_PALMAS=y # CONFIG_TPS6105X is not set # CONFIG_TPS65010 is not set # CONFIG_TPS6507X is not set CONFIG_MFD_TPS65090=y # CONFIG_MFD_TPS65217 is not set CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y CONFIG_MFD_TPS65912=y CONFIG_MFD_TPS65912_I2C=y CONFIG_MFD_TPS65912_SPI=y # CONFIG_MFD_TPS80031 is not set # CONFIG_TWL4030_CORE is not set CONFIG_TWL6040_CORE=y # CONFIG_MFD_WL1273_CORE is not set # CONFIG_MFD_LM3533 is not set # CONFIG_MFD_TIMBERDALE is not set CONFIG_MFD_TC3589X=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_VX855 is not set # CONFIG_MFD_ARIZONA_I2C is not set # CONFIG_MFD_ARIZONA_SPI is not set CONFIG_MFD_WM8400=y CONFIG_MFD_WM831X=y CONFIG_MFD_WM831X_I2C=y CONFIG_MFD_WM831X_SPI=y CONFIG_MFD_WM8350=y CONFIG_MFD_WM8350_I2C=y CONFIG_MFD_WM8994=y CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set # CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set CONFIG_REGULATOR_88PM8607=y # CONFIG_REGULATOR_AD5398 is not set # CONFIG_REGULATOR_AAT2870 is not set # CONFIG_REGULATOR_AB3100 is not set # CONFIG_REGULATOR_DA903X is not set # CONFIG_REGULATOR_DA9052 is not set # CONFIG_REGULATOR_DA9055 is not set # CONFIG_REGULATOR_DA9210 is not set # CONFIG_REGULATOR_FAN53555 is not set # CONFIG_REGULATOR_GPIO is not set # CONFIG_REGULATOR_ISL6271A is not set # CONFIG_REGULATOR_LP3971 is not set # CONFIG_REGULATOR_LP3972 is not set CONFIG_REGULATOR_LP872X=y # CONFIG_REGULATOR_LP8755 is not set CONFIG_REGULATOR_LP8788=y # CONFIG_REGULATOR_MAX1586 is not set # CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set # CONFIG_REGULATOR_MAX8925 is not set # CONFIG_REGULATOR_MAX8952 is not set # CONFIG_REGULATOR_MAX8973 is not set # CONFIG_REGULATOR_MAX8997 is not set # CONFIG_REGULATOR_MAX8998 is not set # CONFIG_REGULATOR_MAX77686 is not set # CONFIG_REGULATOR_MAX77693 is not set # CONFIG_REGULATOR_PALMAS is not set # CONFIG_REGULATOR_PCAP is not set # CONFIG_REGULATOR_PFUZE100 is not set # CONFIG_REGULATOR_RC5T583 is not set # CONFIG_REGULATOR_S2MPS11 is not set # CONFIG_REGULATOR_S5M8767 is not set # CONFIG_REGULATOR_TPS51632 is not set # CONFIG_REGULATOR_TPS62360 is not set # CONFIG_REGULATOR_TPS65023 is not set # CONFIG_REGULATOR_TPS6507X is not set # CONFIG_REGULATOR_TPS65090 is not set # CONFIG_REGULATOR_TPS6524X is not set # CONFIG_REGULATOR_TPS6586X is not set # CONFIG_REGULATOR_TPS65910 is not set # CONFIG_REGULATOR_TPS65912 is not set # CONFIG_REGULATOR_WM831X is not set # CONFIG_REGULATOR_WM8350 is not set # CONFIG_REGULATOR_WM8400 is not set # CONFIG_REGULATOR_WM8994 is not set CONFIG_MEDIA_SUPPORT=m # # Multimedia core support # CONFIG_MEDIA_CAMERA_SUPPORT=y CONFIG_MEDIA_ANALOG_TV_SUPPORT=y CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y CONFIG_MEDIA_RADIO_SUPPORT=y CONFIG_MEDIA_RC_SUPPORT=y # CONFIG_MEDIA_CONTROLLER is not set CONFIG_VIDEO_DEV=m CONFIG_VIDEO_V4L2=m # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEOBUF2_CORE=m CONFIG_VIDEOBUF2_MEMOPS=m CONFIG_VIDEOBUF2_VMALLOC=m # CONFIG_VIDEO_V4L2_INT_DEVICE is not set CONFIG_DVB_CORE=m CONFIG_DVB_NET=y # CONFIG_TTPCI_EEPROM is not set CONFIG_DVB_MAX_ADAPTERS=8 CONFIG_DVB_DYNAMIC_MINORS=y # # Media drivers # CONFIG_RC_CORE=m # CONFIG_RC_MAP is not set CONFIG_RC_DECODERS=y # CONFIG_LIRC is not set # CONFIG_IR_NEC_DECODER is not set # CONFIG_IR_RC5_DECODER is not set # CONFIG_IR_RC6_DECODER is not set # CONFIG_IR_JVC_DECODER is not set # CONFIG_IR_SONY_DECODER is not set # CONFIG_IR_RC5_SZ_DECODER is not set # CONFIG_IR_SANYO_DECODER is not set # CONFIG_IR_MCE_KBD_DECODER is not set CONFIG_RC_DEVICES=y # CONFIG_RC_ATI_REMOTE is not set # CONFIG_IR_ENE is not set # CONFIG_IR_IMON is not set # CONFIG_IR_MCEUSB is not set # CONFIG_IR_ITE_CIR is not set # CONFIG_IR_FINTEK is not set # CONFIG_IR_NUVOTON is not set # CONFIG_IR_REDRAT3 is not set # CONFIG_IR_STREAMZAP is not set # CONFIG_IR_WINBOND_CIR is not set # CONFIG_IR_IGUANA is not set # CONFIG_IR_TTUSBIR is not set # CONFIG_RC_LOOPBACK is not set # CONFIG_IR_GPIO_CIR is not set CONFIG_MEDIA_USB_SUPPORT=y # # Webcam devices # CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y # CONFIG_USB_GSPCA is not set # CONFIG_USB_PWC is not set # CONFIG_VIDEO_CPIA2 is not set # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set # CONFIG_USB_SN9C102 is not set # CONFIG_VIDEO_USBTV is not set # # Analog TV USB devices # # CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_HDPVR is not set # CONFIG_VIDEO_TLG2300 is not set # CONFIG_VIDEO_USBVISION is not set # CONFIG_VIDEO_STK1160_COMMON is not set # # Analog/digital TV USB devices # # CONFIG_VIDEO_AU0828 is not set # CONFIG_VIDEO_CX231XX is not set # CONFIG_VIDEO_TM6000 is not set # # Digital TV USB devices # # CONFIG_DVB_USB is not set # CONFIG_DVB_USB_V2 is not set # CONFIG_DVB_TTUSB_BUDGET is not set # CONFIG_DVB_TTUSB_DEC is not set # CONFIG_SMS_USB_DRV is not set # CONFIG_DVB_B2C2_FLEXCOP_USB is not set # # Webcam, TV (analog/digital) USB devices # # CONFIG_VIDEO_EM28XX is not set CONFIG_MEDIA_PCI_SUPPORT=y # # Media capture support # # # Media capture/analog TV support # # CONFIG_VIDEO_IVTV is not set # CONFIG_VIDEO_ZORAN is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_MXB is not set # # Media capture/analog/hybrid TV support # # CONFIG_VIDEO_CX18 is not set # CONFIG_VIDEO_CX23885 is not set # CONFIG_VIDEO_CX25821 is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_BT848 is not set # CONFIG_VIDEO_SAA7134 is not set # CONFIG_VIDEO_SAA7164 is not set # # Media digital TV PCI Adapters # # CONFIG_DVB_AV7110 is not set # CONFIG_DVB_BUDGET_CORE is not set # CONFIG_DVB_B2C2_FLEXCOP_PCI is not set # CONFIG_DVB_PLUTO2 is not set # CONFIG_DVB_DM1105 is not set # CONFIG_DVB_PT1 is not set # CONFIG_MANTIS_CORE is not set # CONFIG_DVB_NGENE is not set # CONFIG_DVB_DDBRIDGE is not set CONFIG_V4L_PLATFORM_DRIVERS=y # CONFIG_VIDEO_CAFE_CCIC is not set # CONFIG_VIDEO_TIMBERDALE is not set # CONFIG_SOC_CAMERA is not set CONFIG_V4L_MEM2MEM_DRIVERS=y # CONFIG_VIDEO_MEM2MEM_DEINTERLACE is not set # CONFIG_VIDEO_SH_VEU is not set CONFIG_V4L_TEST_DRIVERS=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_MEM2MEM_TESTDEV is not set # # Supported MMC/SDIO adapters # # CONFIG_SMS_SDIO_DRV is not set CONFIG_MEDIA_PARPORT_SUPPORT=y # CONFIG_VIDEO_BWQCAM is not set # CONFIG_VIDEO_CQCAM is not set # CONFIG_VIDEO_W9966 is not set CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_SI470X=y # CONFIG_USB_SI470X is not set # CONFIG_I2C_SI470X is not set # CONFIG_USB_MR800 is not set # CONFIG_USB_DSBR is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_SHARK is not set # CONFIG_RADIO_SHARK2 is not set # CONFIG_I2C_SI4713 is not set # CONFIG_RADIO_SI4713 is not set # CONFIG_USB_KEENE is not set # CONFIG_USB_MA901 is not set # CONFIG_RADIO_TEA5764 is not set # CONFIG_RADIO_SAA7706H is not set # CONFIG_RADIO_TEF6862 is not set # CONFIG_RADIO_WL1273 is not set # # Texas Instruments WL128x FM driver (ST based) # # CONFIG_RADIO_WL128X is not set # CONFIG_CYPRESS_FIRMWARE is not set # # Media ancillary drivers (tuners, sensors, i2c, frontends) # CONFIG_MEDIA_SUBDRV_AUTOSELECT=y CONFIG_MEDIA_ATTACH=y CONFIG_VIDEO_IR_I2C=m # # Audio decoders, processors and mixers # # # RDS decoders # # # Video decoders # # # Video and audio decoders # # # Video encoders # # # Camera sensor devices # # # Flash devices # # # Video improvement chips # # # Miscelaneous helper chips # # # Sensors used on soc_camera driver # CONFIG_MEDIA_TUNER=m CONFIG_MEDIA_TUNER_SIMPLE=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m CONFIG_MEDIA_TUNER_XC4000=m CONFIG_MEDIA_TUNER_MC44S803=m # # Multistandard (satellite) frontends # # # Multistandard (cable + terrestrial) frontends # # # DVB-S (satellite) frontends # # # DVB-T (terrestrial) frontends # # # DVB-C (cable) frontends # # # ATSC (North American/Korean Terrestrial/Cable DTV) frontends # # # ISDB-T (terrestrial) frontends # # # Digital terrestrial only tuners/PLL # # # SEC control devices for DVB-S # # # Tools to develop new frontends # # CONFIG_DVB_DUMMY_FE is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_SIS is not set CONFIG_AGP_VIA=y CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=m CONFIG_DRM_KMS_HELPER=m CONFIG_DRM_LOAD_EDID_FIRMWARE=y # # I2C encoder or helper chips # # CONFIG_DRM_I2C_CH7006 is not set # CONFIG_DRM_I2C_SIL164 is not set # CONFIG_DRM_I2C_NXP_TDA998X is not set # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_NOUVEAU is not set # CONFIG_DRM_I810 is not set CONFIG_DRM_I915=m CONFIG_DRM_I915_KMS=y # CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_DRM_VMWGFX is not set # CONFIG_DRM_GMA500 is not set # CONFIG_DRM_UDL is not set # CONFIG_DRM_AST is not set # CONFIG_DRM_MGAG200 is not set # CONFIG_DRM_CIRRUS_QEMU is not set # CONFIG_DRM_QXL is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_HDMI=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set # CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set CONFIG_FB_ASILIANT=y CONFIG_FB_IMSTT=y # CONFIG_FB_VGA16 is not set # CONFIG_FB_UVESA is not set # CONFIG_FB_VESA is not set CONFIG_FB_EFI=y # CONFIG_FB_N411 is not set # CONFIG_FB_HGA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I740 is not set # CONFIG_FB_LE80578 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_CARMINE is not set # CONFIG_FB_TMIO is not set # CONFIG_FB_SMSCUFX is not set # CONFIG_FB_UDL is not set # CONFIG_FB_GOLDFISH is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_XEN_FBDEV_FRONTEND is not set # CONFIG_FB_METRONOME is not set # CONFIG_FB_MB862XX is not set # CONFIG_FB_BROADSHEET is not set # CONFIG_FB_AUO_K190X is not set # CONFIG_FB_SIMPLE is not set CONFIG_EXYNOS_VIDEO=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_GENERIC is not set # CONFIG_BACKLIGHT_PWM is not set # CONFIG_BACKLIGHT_DA903X is not set # CONFIG_BACKLIGHT_DA9052 is not set # CONFIG_BACKLIGHT_MAX8925 is not set # CONFIG_BACKLIGHT_APPLE is not set # CONFIG_BACKLIGHT_SAHARA is not set # CONFIG_BACKLIGHT_WM831X is not set # CONFIG_BACKLIGHT_ADP5520 is not set # CONFIG_BACKLIGHT_ADP8860 is not set # CONFIG_BACKLIGHT_ADP8870 is not set # CONFIG_BACKLIGHT_88PM860X is not set # CONFIG_BACKLIGHT_AAT2870 is not set # CONFIG_BACKLIGHT_LM3630 is not set # CONFIG_BACKLIGHT_LM3639 is not set # CONFIG_BACKLIGHT_LP855X is not set # CONFIG_BACKLIGHT_LP8788 is not set # CONFIG_BACKLIGHT_GPIO is not set # CONFIG_BACKLIGHT_LV5207LP is not set # CONFIG_BACKLIGHT_BD6107 is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_LOGO is not set CONFIG_SOUND=m # CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m CONFIG_SND_HWDEP=m CONFIG_SND_RAWMIDI=m CONFIG_SND_JACK=y CONFIG_SND_SEQUENCER=m # CONFIG_SND_SEQ_DUMMY is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set # CONFIG_SND_SEQUENCER_OSS is not set # CONFIG_SND_HRTIMER is not set CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_KCTL_JACK=y CONFIG_SND_DMA_SGBUF=y CONFIG_SND_RAWMIDI_SEQ=m # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set CONFIG_SND_DRIVERS=y # CONFIG_SND_PCSP is not set # CONFIG_SND_DUMMY is not set # CONFIG_SND_ALOOP is not set CONFIG_SND_VIRMIDI=m # CONFIG_SND_MTPAV is not set # CONFIG_SND_MTS64 is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # CONFIG_SND_PORTMAN2X4 is not set CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set # CONFIG_SND_ALS4000 is not set # CONFIG_SND_ALI5451 is not set # CONFIG_SND_ASIHPI is not set # CONFIG_SND_ATIIXP is not set # CONFIG_SND_ATIIXP_MODEM is not set # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set # CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_OXYGEN is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS5530 is not set # CONFIG_SND_CS5535AUDIO is not set # CONFIG_SND_CTXFI is not set # CONFIG_SND_DARLA20 is not set # CONFIG_SND_GINA20 is not set # CONFIG_SND_LAYLA20 is not set # CONFIG_SND_DARLA24 is not set # CONFIG_SND_GINA24 is not set # CONFIG_SND_LAYLA24 is not set # CONFIG_SND_MONA is not set # CONFIG_SND_MIA is not set # CONFIG_SND_ECHO3G is not set # CONFIG_SND_INDIGO is not set # CONFIG_SND_INDIGOIO is not set # CONFIG_SND_INDIGODJ is not set # CONFIG_SND_INDIGOIOX is not set # CONFIG_SND_INDIGODJX is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_EMU10K1X is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_PREALLOC_SIZE=64 CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y CONFIG_SND_HDA_INPUT_BEEP=y CONFIG_SND_HDA_INPUT_BEEP_MODE=0 CONFIG_SND_HDA_INPUT_JACK=y CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_HDMI=y # CONFIG_SND_HDA_I915 is not set CONFIG_SND_HDA_CODEC_CIRRUS=y CONFIG_SND_HDA_CODEC_CONEXANT=y CONFIG_SND_HDA_CODEC_CA0110=y CONFIG_SND_HDA_CODEC_CA0132=y # CONFIG_SND_HDA_CODEC_CA0132_DSP is not set CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 # CONFIG_SND_HDSP is not set # CONFIG_SND_HDSPM is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_INTEL8X0M is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_LOLA is not set # CONFIG_SND_LX6464ES is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_MIXART is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_PCXHR is not set # CONFIG_SND_RIPTIDE is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_TRIDENT is not set # CONFIG_SND_VIA82XX is not set # CONFIG_SND_VIA82XX_MODEM is not set # CONFIG_SND_VIRTUOSO is not set # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set CONFIG_SND_SPI=y CONFIG_SND_USB=y # CONFIG_SND_USB_AUDIO is not set # CONFIG_SND_USB_UA101 is not set # CONFIG_SND_USB_USX2Y is not set # CONFIG_SND_USB_CAIAQ is not set # CONFIG_SND_USB_US122L is not set # CONFIG_SND_USB_6FIRE is not set # CONFIG_SND_USB_HIFACE is not set # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set # # HID support # CONFIG_HID=m CONFIG_HIDRAW=y # CONFIG_UHID is not set CONFIG_HID_GENERIC=m # # Special HID drivers # # CONFIG_HID_A4TECH is not set # CONFIG_HID_ACRUX is not set # CONFIG_HID_APPLE is not set # CONFIG_HID_APPLEIR is not set # CONFIG_HID_AUREAL is not set # CONFIG_HID_BELKIN is not set # CONFIG_HID_CHERRY is not set # CONFIG_HID_CHICONY is not set # CONFIG_HID_PRODIKEYS is not set # CONFIG_HID_CYPRESS is not set # CONFIG_HID_DRAGONRISE is not set # CONFIG_HID_EMS_FF is not set # CONFIG_HID_ELECOM is not set # CONFIG_HID_ELO is not set # CONFIG_HID_EZKEY is not set # CONFIG_HID_HOLTEK is not set # CONFIG_HID_HUION is not set # CONFIG_HID_KEYTOUCH is not set # CONFIG_HID_KYE is not set # CONFIG_HID_UCLOGIC is not set # CONFIG_HID_WALTOP is not set # CONFIG_HID_GYRATION is not set # CONFIG_HID_ICADE is not set # CONFIG_HID_TWINHAN is not set # CONFIG_HID_KENSINGTON is not set # CONFIG_HID_LCPOWER is not set # CONFIG_HID_LENOVO_TPKBD is not set # CONFIG_HID_LOGITECH is not set # CONFIG_HID_MAGICMOUSE is not set # CONFIG_HID_MICROSOFT is not set # CONFIG_HID_MONTEREY is not set # CONFIG_HID_MULTITOUCH is not set # CONFIG_HID_NTRIG is not set # CONFIG_HID_ORTEK is not set # CONFIG_HID_PANTHERLORD is not set # CONFIG_HID_PETALYNX is not set # CONFIG_HID_PICOLCD is not set # CONFIG_HID_PRIMAX is not set # CONFIG_HID_ROCCAT is not set # CONFIG_HID_SAITEK is not set # CONFIG_HID_SAMSUNG is not set # CONFIG_HID_SONY is not set # CONFIG_HID_SPEEDLINK is not set # CONFIG_HID_STEELSERIES is not set # CONFIG_HID_SUNPLUS is not set # CONFIG_HID_GREENASIA is not set # CONFIG_HID_SMARTJOYPLUS is not set # CONFIG_HID_TIVO is not set # CONFIG_HID_TOPSEED is not set # CONFIG_HID_THINGM is not set # CONFIG_HID_THRUSTMASTER is not set # CONFIG_HID_WACOM is not set # CONFIG_HID_WIIMOTE is not set # CONFIG_HID_XINMO is not set # CONFIG_HID_ZEROPLUS is not set # CONFIG_HID_ZYDACRON is not set # CONFIG_HID_SENSOR_HUB is not set # # USB HID support # CONFIG_USB_HID=m CONFIG_HID_PID=y CONFIG_USB_HIDDEV=y # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set # # I2C HID support # # CONFIG_I2C_HID is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y CONFIG_USB_DYNAMIC_MINORS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=m # CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=y CONFIG_USB_EHCI_HCD_PLATFORM=y # CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_ISP1362_HCD is not set # CONFIG_USB_FUSBH200_HCD is not set # CONFIG_USB_FOTG210_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PCI=y CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # CONFIG_USB_HCD_TEST_MODE is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set # CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # # also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_REALTEK is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_STORAGE_ENE_UB6250 is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # CONFIG_USB_DWC3 is not set # CONFIG_USB_CHIPIDEA is not set # # USB port drivers # # CONFIG_USB_USS720 is not set # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set # CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_EHSET_TEST_FIXTURE is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_YUREX is not set # CONFIG_USB_EZUSB_FX2 is not set # CONFIG_USB_HSIC_USB3503 is not set # # USB Physical Layer drivers # # CONFIG_USB_PHY is not set # CONFIG_NOP_USB_XCEIV is not set # CONFIG_AM335X_PHY_USB is not set # CONFIG_SAMSUNG_USB2PHY is not set # CONFIG_SAMSUNG_USB3PHY is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_USB_ISP1301 is not set # CONFIG_USB_RCAR_PHY is not set # CONFIG_USB_GADGET is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # CONFIG_MMC_CLKGATE is not set # # MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set # # MMC/SD/SDIO Host Controller Drivers # CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m # CONFIG_MMC_RICOH_MMC is not set # CONFIG_MMC_SDHCI_ACPI is not set # CONFIG_MMC_SDHCI_PLTFM is not set # CONFIG_MMC_WBSD is not set # CONFIG_MMC_TIFM_SD is not set # CONFIG_MMC_SPI is not set # CONFIG_MMC_CB710 is not set # CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MMC_VUB300 is not set # CONFIG_MMC_USHC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # # CONFIG_LEDS_88PM860X is not set # CONFIG_LEDS_LM3530 is not set # CONFIG_LEDS_LM3642 is not set # CONFIG_LEDS_PCA9532 is not set # CONFIG_LEDS_GPIO is not set # CONFIG_LEDS_LP3944 is not set # CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_LP5523 is not set # CONFIG_LEDS_LP5562 is not set # CONFIG_LEDS_LP8501 is not set # CONFIG_LEDS_LP8788 is not set # CONFIG_LEDS_CLEVO_MAIL is not set # CONFIG_LEDS_PCA955X is not set # CONFIG_LEDS_PCA963X is not set # CONFIG_LEDS_WM831X_STATUS is not set # CONFIG_LEDS_WM8350 is not set # CONFIG_LEDS_DA903X is not set # CONFIG_LEDS_DA9052 is not set # CONFIG_LEDS_DAC124S085 is not set # CONFIG_LEDS_PWM is not set # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_INTEL_SS4200 is not set # CONFIG_LEDS_LT3593 is not set # CONFIG_LEDS_ADP5520 is not set # CONFIG_LEDS_DELL_NETBOOKS is not set # CONFIG_LEDS_TCA6507 is not set # CONFIG_LEDS_MAX8997 is not set # CONFIG_LEDS_LM355x is not set # CONFIG_LEDS_OT200 is not set # CONFIG_LEDS_BLINKM is not set # # LED Triggers # CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_ONESHOT is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_CPU=y # CONFIG_LEDS_TRIGGER_GPIO is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # # iptables trigger is under Netfilter config (LED target) # # CONFIG_LEDS_TRIGGER_TRANSIENT is not set # CONFIG_LEDS_TRIGGER_CAMERA is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set # CONFIG_EDAC_DECODE_MCE is not set # CONFIG_EDAC_MM_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_SYSTOHC=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" # CONFIG_RTC_DEBUG is not set # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set # CONFIG_RTC_DRV_TEST is not set # # I2C RTC drivers # # CONFIG_RTC_DRV_88PM860X is not set # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_DS3232 is not set # CONFIG_RTC_DRV_LP8788 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_MAX8925 is not set # CONFIG_RTC_DRV_MAX8998 is not set # CONFIG_RTC_DRV_MAX8997 is not set # CONFIG_RTC_DRV_MAX77686 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_ISL12022 is not set # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PALMAS is not set # CONFIG_RTC_DRV_PCF2127 is not set # CONFIG_RTC_DRV_PCF8523 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_BQ32K is not set # CONFIG_RTC_DRV_TPS6586X is not set # CONFIG_RTC_DRV_TPS65910 is not set # CONFIG_RTC_DRV_RC5T583 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set # CONFIG_RTC_DRV_RX8581 is not set # CONFIG_RTC_DRV_RX8025 is not set # CONFIG_RTC_DRV_EM3027 is not set # CONFIG_RTC_DRV_RV3029C2 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T93 is not set # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set # CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_DS3234 is not set # CONFIG_RTC_DRV_PCF2123 is not set # CONFIG_RTC_DRV_RX4581 is not set # # Platform RTC drivers # CONFIG_RTC_DRV_CMOS=y # CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_DA9052 is not set # CONFIG_RTC_DRV_DA9055 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_MSM6242 is not set # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set # CONFIG_RTC_DRV_DS2404 is not set # CONFIG_RTC_DRV_WM831X is not set # CONFIG_RTC_DRV_WM8350 is not set # CONFIG_RTC_DRV_AB3100 is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_PCAP is not set # CONFIG_RTC_DRV_MOXART is not set # # HID Sensor RTC drivers # # CONFIG_RTC_DRV_HID_SENSOR_TIME is not set CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set # # DMA Devices # # CONFIG_INTEL_MID_DMAC is not set # CONFIG_INTEL_IOATDMA is not set # CONFIG_DW_DMAC_CORE is not set # CONFIG_DW_DMAC is not set # CONFIG_DW_DMAC_PCI is not set # CONFIG_TIMB_DMA is not set # CONFIG_PCH_DMA is not set CONFIG_DMA_ENGINE=y CONFIG_DMA_ACPI=y # # DMA Clients # CONFIG_NET_DMA=y # CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set CONFIG_AUXDISPLAY=y # CONFIG_KS0108 is not set # CONFIG_UIO is not set # CONFIG_VFIO is not set CONFIG_VIRT_DRIVERS=y CONFIG_VIRTIO=y # # Virtio drivers # CONFIG_VIRTIO_PCI=y # CONFIG_VIRTIO_BALLOON is not set # CONFIG_VIRTIO_MMIO is not set # # Microsoft Hyper-V guest support # # CONFIG_HYPERV is not set # # Xen driver support # CONFIG_XEN_BALLOON=y CONFIG_XEN_SELFBALLOONING=y CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y CONFIG_XEN_SCRUB_PAGES=y # CONFIG_XEN_DEV_EVTCHN is not set CONFIG_XEN_BACKEND=y # CONFIG_XENFS is not set CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y # CONFIG_XEN_GNTDEV is not set # CONFIG_XEN_GRANT_DEV_ALLOC is not set CONFIG_SWIOTLB_XEN=y CONFIG_XEN_TMEM=m # CONFIG_XEN_PCIDEV_BACKEND is not set CONFIG_XEN_PRIVCMD=m CONFIG_XEN_ACPI_PROCESSOR=y CONFIG_XEN_MCE_LOG=y CONFIG_XEN_HAVE_PVMMU=y CONFIG_STAGING=y # CONFIG_ET131X is not set # CONFIG_SLICOSS is not set # CONFIG_USBIP_CORE is not set # CONFIG_W35UND is not set # CONFIG_PRISM2_USB is not set # CONFIG_ECHO is not set # CONFIG_COMEDI is not set # CONFIG_PANEL is not set # CONFIG_R8187SE is not set # CONFIG_RTL8192U is not set # CONFIG_RTLLIB is not set # CONFIG_R8712U is not set # CONFIG_RTS5139 is not set # CONFIG_TRANZPORT is not set # CONFIG_IDE_PHISON is not set # CONFIG_LINE6_USB is not set # CONFIG_VT6655 is not set # CONFIG_VT6656 is not set # CONFIG_DX_SEP is not set CONFIG_ZSMALLOC=y # CONFIG_ZRAM is not set # CONFIG_FB_SM7XX is not set # CONFIG_CRYSTALHD is not set # CONFIG_FB_XGI is not set # CONFIG_ACPI_QUICKSTART is not set # CONFIG_USB_ENESTORAGE is not set # CONFIG_BCM_WIMAX is not set # CONFIG_FT1000 is not set # # Speakup console speech # # CONFIG_SPEAKUP is not set # CONFIG_TOUCHSCREEN_CLEARPAD_TM1217 is not set # CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4 is not set CONFIG_STAGING_MEDIA=y # CONFIG_DVB_AS102 is not set # CONFIG_DVB_CXD2099 is not set # CONFIG_VIDEO_DT3155 is not set # CONFIG_VIDEO_GO7007 is not set # CONFIG_SOLO6X10 is not set # # Android # CONFIG_ANDROID=y CONFIG_ANDROID_BINDER_IPC=y CONFIG_ASHMEM=y # CONFIG_ANDROID_LOGGER is not set CONFIG_ANDROID_TIMED_OUTPUT=y # CONFIG_ANDROID_TIMED_GPIO is not set CONFIG_ANDROID_LOW_MEMORY_KILLER=y CONFIG_ANDROID_INTF_ALARM_DEV=y # CONFIG_SYNC is not set # CONFIG_USB_WPAN_HCD is not set # CONFIG_WIMAX_GDM72XX is not set # CONFIG_LTE_GDM724X is not set CONFIG_NET_VENDOR_SILICOM=y # CONFIG_SBYPASS is not set # CONFIG_BPCTL is not set # CONFIG_CED1401 is not set # CONFIG_DGRP is not set # CONFIG_USB_DWC2 is not set # CONFIG_LUSTRE_FS is not set # CONFIG_USB_BTMTK is not set # CONFIG_XILLYBUS is not set CONFIG_X86_PLATFORM_DEVICES=y # CONFIG_ACER_WMI is not set # CONFIG_ACERHDF is not set # CONFIG_ASUS_LAPTOP is not set # CONFIG_CHROMEOS_LAPTOP is not set # CONFIG_DELL_WMI is not set # CONFIG_DELL_WMI_AIO is not set # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_FUJITSU_TABLET is not set # CONFIG_AMILO_RFKILL is not set # CONFIG_HP_ACCEL is not set # CONFIG_HP_WMI is not set # CONFIG_MSI_LAPTOP is not set # CONFIG_PANASONIC_LAPTOP is not set # CONFIG_COMPAL_LAPTOP is not set # CONFIG_SONY_LAPTOP is not set # CONFIG_IDEAPAD_LAPTOP is not set # CONFIG_THINKPAD_ACPI is not set # CONFIG_SENSORS_HDAPS is not set # CONFIG_INTEL_MENLOW is not set # CONFIG_EEEPC_LAPTOP is not set # CONFIG_ASUS_WMI is not set CONFIG_ACPI_WMI=m # CONFIG_MSI_WMI is not set # CONFIG_TOPSTAR_LAPTOP is not set # CONFIG_ACPI_TOSHIBA is not set # CONFIG_TOSHIBA_BT_RFKILL is not set # CONFIG_ACPI_CMPC is not set # CONFIG_INTEL_IPS is not set # CONFIG_IBM_RTL is not set # CONFIG_XO15_EBOOK is not set CONFIG_SAMSUNG_LAPTOP=m # CONFIG_MXM_WMI is not set # CONFIG_INTEL_OAKTRAIL is not set # CONFIG_SAMSUNG_Q10 is not set # CONFIG_APPLE_GMUX is not set # CONFIG_INTEL_RST is not set # CONFIG_INTEL_SMARTCONNECT is not set # CONFIG_PVPANIC is not set # # Hardware Spinlock drivers # CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y # CONFIG_MAILBOX is not set CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y CONFIG_AMD_IOMMU=y CONFIG_AMD_IOMMU_STATS=y # CONFIG_AMD_IOMMU_V2 is not set CONFIG_DMAR_TABLE=y CONFIG_INTEL_IOMMU=y # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_INTEL_IOMMU_FLOPPY_WA=y CONFIG_IRQ_REMAP=y # # Remoteproc drivers # # CONFIG_STE_MODEM_RPROC is not set # # Rpmsg drivers # CONFIG_PM_DEVFREQ=y # # DEVFREQ Governors # CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y # # DEVFREQ Drivers # CONFIG_EXTCON=y # # Extcon Device Drivers # # CONFIG_EXTCON_GPIO is not set # CONFIG_EXTCON_MAX77693 is not set # CONFIG_EXTCON_MAX8997 is not set # CONFIG_EXTCON_PALMAS is not set CONFIG_MEMORY=y # CONFIG_IIO is not set # CONFIG_NTB is not set # CONFIG_VME_BUS is not set CONFIG_PWM=y CONFIG_PWM_SYSFS=y # CONFIG_IPACK_BUS is not set # CONFIG_RESET_CONTROLLER is not set # CONFIG_FMC is not set # # Firmware Drivers # CONFIG_EDD=y CONFIG_EDD_OFF=y CONFIG_FIRMWARE_MEMMAP=y # CONFIG_DELL_RBU is not set # CONFIG_DCDBAS is not set CONFIG_DMIID=y # CONFIG_DMI_SYSFS is not set CONFIG_ISCSI_IBFT_FIND=y # CONFIG_ISCSI_IBFT is not set # CONFIG_GOOGLE_FIRMWARE is not set # # EFI (Extensible Firmware Interface) Support # CONFIG_EFI_VARS=y CONFIG_EFI_VARS_PSTORE=y # CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE is not set # # File systems # CONFIG_DCACHE_WORD_ACCESS=y # CONFIG_EXT2_FS is not set CONFIG_EXT3_FS=y CONFIG_EXT3_DEFAULTS_TO_ORDERED=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=y CONFIG_EXT4_USE_FOR_EXT23=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_EXT4_DEBUG=y CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y CONFIG_JBD2_DEBUG=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_XFS_FS=m CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set CONFIG_BTRFS_FS=m CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_NILFS2_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_FANOTIFY=y CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y CONFIG_QUOTA=y CONFIG_QUOTA_NETLINK_INTERFACE=y # CONFIG_PRINT_QUOTA_WARNING is not set # CONFIG_QUOTA_DEBUG is not set # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set CONFIG_QUOTACTL=y CONFIG_QUOTACTL_COMPAT=y # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=y # CONFIG_CUSE is not set CONFIG_GENERIC_ACL=y # # Caches # # CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y # CONFIG_ZISOFS is not set CONFIG_UDF_FS=m CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_VMCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set CONFIG_ECRYPT_FS=y # CONFIG_ECRYPT_FS_MESSAGING is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set CONFIG_SQUASHFS=m CONFIG_SQUASHFS_XATTR=y CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set # CONFIG_SQUASHFS_EMBEDDED is not set CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_QNX6FS_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_PSTORE=y # CONFIG_PSTORE_CONSOLE is not set # CONFIG_PSTORE_FTRACE is not set # CONFIG_PSTORE_RAM is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_F2FS_FS is not set # CONFIG_EFIVAR_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_CEPH_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set # CONFIG_NLS_ISO8859_15 is not set # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_MAC_ROMAN is not set # CONFIG_NLS_MAC_CELTIC is not set # CONFIG_NLS_MAC_CENTEURO is not set # CONFIG_NLS_MAC_CROATIAN is not set # CONFIG_NLS_MAC_CYRILLIC is not set # CONFIG_NLS_MAC_GAELIC is not set # CONFIG_NLS_MAC_GREEK is not set # CONFIG_NLS_MAC_ICELAND is not set # CONFIG_NLS_MAC_INUIT is not set # CONFIG_NLS_MAC_ROMANIAN is not set # CONFIG_NLS_MAC_TURKISH is not set # CONFIG_NLS_UTF8 is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # # printk and dmesg options # CONFIG_PRINTK_TIME=y CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4 CONFIG_BOOT_PRINTK_DELAY=y # CONFIG_DYNAMIC_DEBUG is not set # # Compile-time checks and compiler options # # CONFIG_DEBUG_INFO is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set CONFIG_FRAME_WARN=1024 # CONFIG_STRIP_ASM_SYMS is not set # CONFIG_READABLE_ASM is not set CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_SECTION_MISMATCH is not set CONFIG_ARCH_WANT_FRAME_POINTERS=y CONFIG_FRAME_POINTER=y # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y # # Memory Debugging # # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set # CONFIG_DEBUG_OBJECTS_FREE is not set # CONFIG_DEBUG_OBJECTS_TIMERS is not set # CONFIG_DEBUG_OBJECTS_WORK is not set CONFIG_DEBUG_OBJECTS_RCU_HEAD=y # CONFIG_DEBUG_OBJECTS_PERCPU_COUNTER is not set CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SLAB_LEAK is not set CONFIG_HAVE_DEBUG_KMEMLEAK=y # CONFIG_DEBUG_KMEMLEAK is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_VIRTUAL is not set CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_PER_CPU_MAPS is not set CONFIG_HAVE_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACKOVERFLOW is not set CONFIG_HAVE_ARCH_KMEMCHECK=y # CONFIG_DEBUG_SHIRQ is not set # # Debug Lockups and Hangs # CONFIG_LOCKUP_DETECTOR=y CONFIG_HARDLOCKUP_DETECTOR=y # CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set CONFIG_BOOTPARAM_HARDLOCKUP_PANIC_VALUE=0 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_DETECT_HUNG_TASK=y CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_PANIC_ON_OOPS is not set CONFIG_PANIC_ON_OOPS_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y # # Lock Debugging (spinlocks, mutexes, etc...) # # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set # CONFIG_DEBUG_LOCK_ALLOC is not set # CONFIG_PROVE_LOCKING is not set # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_ATOMIC_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_KOBJECT_RELEASE is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_DEBUG_CREDENTIALS is not set # # RCU Debugging # # CONFIG_SPARSE_RCU_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_RCU_CPU_STALL_INFO is not set # CONFIG_RCU_TRACE is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_NOTIFIER_ERROR_INJECTION is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y # CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set CONFIG_USER_STACKTRACE_SUPPORT=y CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HAVE_FENTRY=y CONFIG_HAVE_C_RECORDMCOUNT=y CONFIG_TRACER_MAX_TRACE=y CONFIG_TRACE_CLOCK=y CONFIG_RING_BUFFER=y CONFIG_EVENT_TRACING=y CONFIG_CONTEXT_SWITCH_TRACER=y CONFIG_TRACING=y CONFIG_GENERIC_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y CONFIG_FUNCTION_TRACER=y CONFIG_FUNCTION_GRAPH_TRACER=y # CONFIG_IRQSOFF_TRACER is not set CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT=y # CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP is not set CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_PROFILE_ANNOTATED_BRANCHES is not set # CONFIG_PROFILE_ALL_BRANCHES is not set CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y CONFIG_KPROBE_EVENT=y CONFIG_UPROBE_EVENT=y CONFIG_PROBE_EVENTS=y CONFIG_DYNAMIC_FTRACE=y CONFIG_DYNAMIC_FTRACE_WITH_REGS=y CONFIG_FUNCTION_PROFILER=y CONFIG_FTRACE_MCOUNT_RECORD=y # CONFIG_FTRACE_STARTUP_TEST is not set CONFIG_MMIOTRACE=y # CONFIG_MMIOTRACE_TEST is not set # CONFIG_RING_BUFFER_BENCHMARK is not set # CONFIG_RING_BUFFER_STARTUP_TEST is not set # # Runtime Testing # # CONFIG_LKDTM is not set # CONFIG_TEST_LIST_SORT is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_RBTREE_TEST is not set # CONFIG_INTERVAL_TREE_TEST is not set # CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_TEST_STRING_HELPERS is not set # CONFIG_TEST_KSTRTOX is not set # CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set # CONFIG_DMA_API_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y CONFIG_KGDB=y CONFIG_KGDB_SERIAL_CONSOLE=y # CONFIG_KGDB_TESTS is not set CONFIG_KGDB_LOW_LEVEL_TRAP=y CONFIG_KGDB_KDB=y CONFIG_KDB_KEYBOARD=y CONFIG_KDB_CONTINUE_CATASTROPHIC=0 CONFIG_STRICT_DEVMEM=y # CONFIG_X86_VERBOSE_BOOTUP is not set CONFIG_EARLY_PRINTK=y CONFIG_EARLY_PRINTK_DBGP=y # CONFIG_X86_PTDUMP is not set CONFIG_DEBUG_RODATA=y # CONFIG_DEBUG_RODATA_TEST is not set CONFIG_DEBUG_SET_MODULE_RONX=y # CONFIG_DEBUG_NX_TEST is not set CONFIG_DOUBLEFAULT=y # CONFIG_DEBUG_TLBFLUSH is not set # CONFIG_IOMMU_DEBUG is not set # CONFIG_IOMMU_STRESS is not set CONFIG_HAVE_MMIOTRACE_SUPPORT=y # CONFIG_X86_DECODER_SELFTEST is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 # CONFIG_IO_DELAY_0X80 is not set CONFIG_IO_DELAY_0XED=y # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=1 # CONFIG_DEBUG_BOOT_PARAMS is not set # CONFIG_CPA_DEBUG is not set CONFIG_OPTIMIZE_INLINING=y # CONFIG_DEBUG_NMI_SELFTEST is not set # CONFIG_X86_DEBUG_STATIC_CPU_HAS is not set # # Security options # CONFIG_KEYS=y CONFIG_TRUSTED_KEYS=y CONFIG_ENCRYPTED_KEYS=y # CONFIG_KEYS_DEBUG_PROC_KEYS is not set # CONFIG_SECURITY_DMESG_RESTRICT is not set CONFIG_SECURITY=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y CONFIG_SECURITY_PATH=y CONFIG_INTEL_TXT=y CONFIG_LSM_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=0 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set CONFIG_SECURITY_SMACK=y CONFIG_SECURITY_TOMOYO=y CONFIG_SECURITY_TOMOYO_MAX_ACCEPT_ENTRY=2048 CONFIG_SECURITY_TOMOYO_MAX_AUDIT_LOG=1024 # CONFIG_SECURITY_TOMOYO_OMIT_USERSPACE_LOADER is not set CONFIG_SECURITY_TOMOYO_POLICY_LOADER="/sbin/tomoyo-init" CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGER="/sbin/init" CONFIG_SECURITY_APPARMOR=y CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1 CONFIG_SECURITY_APPARMOR_HASH=y CONFIG_SECURITY_YAMA=y CONFIG_SECURITY_YAMA_STACKED=y CONFIG_INTEGRITY=y CONFIG_INTEGRITY_SIGNATURE=y CONFIG_INTEGRITY_AUDIT=y # CONFIG_INTEGRITY_ASYMMETRIC_KEYS is not set # CONFIG_IMA is not set CONFIG_EVM=y CONFIG_EVM_HMAC_VERSION=2 # CONFIG_DEFAULT_SECURITY_SELINUX is not set # CONFIG_DEFAULT_SECURITY_SMACK is not set # CONFIG_DEFAULT_SECURITY_TOMOYO is not set CONFIG_DEFAULT_SECURITY_APPARMOR=y # CONFIG_DEFAULT_SECURITY_YAMA is not set # CONFIG_DEFAULT_SECURITY_DAC is not set CONFIG_DEFAULT_SECURITY="apparmor" CONFIG_XOR_BLOCKS=m CONFIG_CRYPTO=y # # Crypto core or helper # CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_USER is not set CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y CONFIG_CRYPTO_GF128MUL=m # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_PCRYPT is not set CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=m # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set CONFIG_CRYPTO_ABLK_HELPER_X86=m CONFIG_CRYPTO_GLUE_HELPER_X86=m # # Authenticated Encryption with Associated Data # # CONFIG_CRYPTO_CCM is not set # CONFIG_CRYPTO_GCM is not set # CONFIG_CRYPTO_SEQIV is not set # # Block modes # CONFIG_CRYPTO_CBC=y # CONFIG_CRYPTO_CTR is not set # CONFIG_CRYPTO_CTS is not set CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=m # CONFIG_CRYPTO_PCBC is not set CONFIG_CRYPTO_XTS=m # # Hash modes # # CONFIG_CRYPTO_CMAC is not set CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_VMAC is not set # # Digest # CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y # CONFIG_CRYPTO_CRC32 is not set # CONFIG_CRYPTO_CRC32_PCLMUL is not set # CONFIG_CRYPTO_GHASH is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_RMD128 is not set # CONFIG_CRYPTO_RMD160 is not set # CONFIG_CRYPTO_RMD256 is not set # CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA1_SSSE3 is not set # CONFIG_CRYPTO_SHA256_SSSE3 is not set # CONFIG_CRYPTO_SHA512_SSSE3 is not set CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y # CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_WP512 is not set CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # # Ciphers # CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_X86_64=m CONFIG_CRYPTO_AES_NI_INTEL=m # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAMELLIA_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set # CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set # CONFIG_CRYPTO_CAST6 is not set # CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set # CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SALSA20_X86_64 is not set # CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SERPENT is not set # CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set # CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set # CONFIG_CRYPTO_TEA is not set # CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH_X86_64 is not set # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set # CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set # # Compression # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_ZLIB is not set CONFIG_CRYPTO_LZO=y # CONFIG_CRYPTO_LZ4 is not set # CONFIG_CRYPTO_LZ4HC is not set # # Random Number Generation # # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_USER_API_HASH is not set # CONFIG_CRYPTO_USER_API_SKCIPHER is not set CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=y # CONFIG_CRYPTO_DEV_PADLOCK_AES is not set # CONFIG_CRYPTO_DEV_PADLOCK_SHA is not set CONFIG_ASYMMETRIC_KEY_TYPE=y CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y CONFIG_PUBLIC_KEY_ALGO_RSA=y CONFIG_X509_CERTIFICATE_PARSER=y CONFIG_HAVE_KVM=y CONFIG_HAVE_KVM_IRQCHIP=y CONFIG_HAVE_KVM_IRQ_ROUTING=y CONFIG_HAVE_KVM_EVENTFD=y CONFIG_KVM_APIC_ARCHITECTURE=y CONFIG_KVM_MMIO=y CONFIG_KVM_ASYNC_PF=y CONFIG_HAVE_KVM_MSI=y CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=m CONFIG_KVM_INTEL=m # CONFIG_KVM_AMD is not set # CONFIG_KVM_MMU_AUDIT is not set CONFIG_KVM_DEVICE_ASSIGNMENT=y CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_RAID6_PQ=m CONFIG_BITREVERSE=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_FIND_FIRST_BIT=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_IO=y CONFIG_PERCPU_RWSEM=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC32_SELFTEST is not set CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m # CONFIG_CRC8 is not set # CONFIG_CRC64_ECMA is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y CONFIG_XZ_DEC_IA64=y CONFIG_XZ_DEC_ARM=y CONFIG_XZ_DEC_ARMTHUMB=y CONFIG_XZ_DEC_SPARC=y CONFIG_XZ_DEC_BCJ=y # CONFIG_XZ_DEC_TEST is not set CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_NLATTR=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y CONFIG_AVERAGE=y CONFIG_CLZ_TAB=y # CONFIG_CORDIC is not set CONFIG_DDR=y CONFIG_MPILIB=y CONFIG_SIGNATURE=y CONFIG_OID_REGISTRY=y CONFIG_UCS2_STRING=y CONFIG_FONT_SUPPORT=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-22 11:13 ` Sedat Dilek @ 2013-08-22 11:22 ` Sedat Dilek 2013-08-22 11:30 ` Daniel Vetter 1 sibling, 0 replies; 16+ messages in thread From: Sedat Dilek @ 2013-08-22 11:22 UTC (permalink / raw) To: Sedat Dilek, Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell Cc: Daniel Vetter [-- Attachment #1: Type: text/plain, Size: 2753 bytes --] On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: > On Thu, Aug 22, 2013 at 9:24 AM, Daniel Vetter <daniel@ffwll•ch> wrote: >> On Thu, Aug 22, 2013 at 08:32:47AM +0200, Sedat Dilek wrote: >>> It's independent of the applied patch. >>> My problem goes away with SNA but still exists with UXA. >>> >>> As said in my previous analysis... switching back to Ubuntu's graphics >>> did not show the symptoms, too. >>> >>> It's interesting to see, it is a problem of the intel-ddx. >> >> Nope, it's just that uxa and sna have completely different buffer object >> usage patterns. Not the first time only one of them hits an issue ... >> >>> Anyway, SNA seems here to be approx. 20% faster in gtkperf-0.40, so I >>> will use it. >>> >>> I am open and willing to test any patches you will provide. >>> Please, let me know. >> >> Found a new bugger, please test the below patch. >> >> Thanks, Daniel >> --- >> diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c >> index ef92c69..e0bff07 100644 >> --- a/drivers/gpu/drm/i915/i915_gem.c >> +++ b/drivers/gpu/drm/i915/i915_gem.c >> @@ -2616,6 +2616,9 @@ int i915_vma_unbind(struct i915_vma *vma) >> drm_i915_private_t *dev_priv = obj->base.dev->dev_private; >> int ret; >> >> + /* For now we only ever use 1 vma per object */ >> + WARN_ON(!list_is_singular(&obj->vma_list)); >> + >> if (list_empty(&vma->vma_link)) >> return 0; >> >> @@ -2661,7 +2664,9 @@ int i915_vma_unbind(struct i915_vma *vma) >> drm_mm_remove_node(&vma->node); >> >> destroy: >> - i915_gem_vma_destroy(vma); >> + /* Keep the vma as a placeholder in the execbuffer reservation lists */ >> + if (!list_empty(&vma->exec_list)) >> + i915_gem_vma_destroy(vma); >> >> /* Since the unbound list is global, only move to that list if >> * no more VMAs exist. >> @@ -4171,10 +4176,6 @@ void i915_gem_vma_destroy(struct i915_vma *vma) >> WARN_ON(vma->node.allocated); >> list_del(&vma->vma_link); >> >> - /* Keep the vma as a placeholder in the execbuffer reservation lists */ >> - if (!list_empty(&vma->exec_list)) >> - return; >> - >> kfree(vma); >> } >> > > dmesg (a lot of traces) and kernel-config attached. > > UXA causes still screen corruption. > > $ egrep -i 'uxa|sna|accelmethod' /var/log/Xorg.0.log > [ 118.951] (**) intel(0): Option "AccelMethod" "uxa" > [ 118.960] (II) UXA(0): Driver registered support for the following > operations: > > - Sedat - > > Is "drm/i915: More vma fixups around unbind/destroy" the nearly same fix? > > [1] https://patchwork.kernel.org/patch/2848146/ With above [1] I see no traces. - Sedat - [-- Attachment #2: dmesg_3.11.0-rc6-next20130821-1-iniza-small_uxa_with-danvet-patch-2.txt --] [-- Type: text/plain, Size: 176654 bytes --] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.11.0-rc6-next20130821-1-iniza-small (sedat.dilek@gmail•com@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed Aug 21 11:53:15 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0204e000, 0x0204efff] PGTABLE [ 0.000000] BRK [0x0204f000, 0x0204ffff] PGTABLE [ 0.000000] BRK [0x02050000, 0x02050fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x02051000, 0x02051fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02052000, 0x02052fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x37968000-0x37cabfff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xd9c9f000-0xdae7efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdae7f000-0xdaf9efff] [ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff] [ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s87488 r8192 d23104 u262144 [ 0.000000] pcpu-alloc: s87488 r8192 d23104 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz.next root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938464K/4086000K available (7211K kernel code, 1055K rwdata, 3184K rodata, 1328K init, 1988K bss, 147536K reserved) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.358 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.71 BogoMIPS (lpj=6385432) [ 0.000080] pid_max: default: 32768 minimum: 301 [ 0.000245] Security Framework initialized [ 0.000306] AppArmor: AppArmor initialized [ 0.000343] Yama: becoming mindful. [ 0.000777] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001897] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002398] Mount-cache hash table entries: 256 [ 0.002959] Initializing cgroup subsys memory [ 0.003056] Initializing cgroup subsys devices [ 0.003094] Initializing cgroup subsys freezer [ 0.003132] Initializing cgroup subsys blkio [ 0.003169] Initializing cgroup subsys perf_event [ 0.003210] Initializing cgroup subsys hugetlb [ 0.003298] Disabled fast string operations [ 0.003336] CPU: Physical Processor ID: 0 [ 0.003371] CPU: Processor Core ID: 0 [ 0.003411] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.003411] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.003476] mce: CPU supports 7 MCE banks [ 0.003527] CPU0: Thermal monitoring enabled (TM1) [ 0.003572] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.003572] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.003572] tlb_flushall_shift: 5 [ 0.003746] Freeing SMP alternatives memory: 24K (ffffffff81e55000 - ffffffff81e5b000) [ 0.004788] ACPI: Core revision 20130725 [ 0.015274] ACPI: All ACPI Tables successfully acquired [ 0.029272] ftrace: allocating 27261 entries in 107 pages [ 0.044778] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.084475] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.085087] TSC deadline timer enabled [ 0.085098] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.085246] ... version: 3 [ 0.085282] ... bit width: 48 [ 0.085318] ... generic registers: 4 [ 0.085354] ... value mask: 0000ffffffffffff [ 0.085392] ... max period: 0000ffffffffffff [ 0.085429] ... fixed-purpose events: 3 [ 0.085465] ... event mask: 000000070000000f [ 0.098546] Disabled fast string operations [ 0.101729] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.113310] Disabled fast string operations [ 0.127023] Disabled fast string operations [ 0.087474] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.129158] Brought up 4 CPUs [ 0.129260] smpboot: Total of 4 processors activated (12770.86 BogoMIPS) [ 0.133371] devtmpfs: initialized [ 0.135372] EVM: security.selinux [ 0.135408] EVM: security.SMACK64 [ 0.135442] EVM: security.capability [ 0.135560] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.137082] regulator-dummy: no parameters [ 0.137274] NET: Registered protocol family 16 [ 0.137610] cpuidle: using governor ladder [ 0.137647] cpuidle: using governor menu [ 0.137721] ACPI: bus type PCI registered [ 0.137869] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.137927] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.144874] PCI: Using configuration type 1 for base access [ 0.148212] bio: create slab <bio-0> at 0 [ 0.148662] ACPI: Added _OSI(Module Device) [ 0.148699] ACPI: Added _OSI(Processor Device) [ 0.148736] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.148774] ACPI: Added _OSI(Processor Aggregator Device) [ 0.150460] ACPI: EC: Look up EC in DSDT [ 0.173012] ACPI: Executed 1 blocks of module-level executable AML code [ 0.178885] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.190672] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.191232] ACPI: Dynamic OEM Table Load: [ 0.191302] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.201450] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.202087] ACPI: Dynamic OEM Table Load: [ 0.202157] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.213345] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.213877] ACPI: Dynamic OEM Table Load: [ 0.213946] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.227209] ACPI: Interpreter enabled [ 0.227259] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571) [ 0.227367] ACPI: (supports S0 S1 S3 S4 S5) [ 0.227404] ACPI: Using IOAPIC for interrupt routing [ 0.227498] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.227770] ACPI: No dock devices found. [ 0.251428] ACPI: Power Resource [FN00] (off) [ 0.251644] ACPI: Power Resource [FN01] (off) [ 0.251856] ACPI: Power Resource [FN02] (off) [ 0.252065] ACPI: Power Resource [FN03] (off) [ 0.252314] ACPI: Power Resource [FN04] (off) [ 0.253419] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.253787] \_SB_.PCI0:_OSC invalid UUID [ 0.253789] _OSC request data:1 8 0 [ 0.254689] acpi PNP0A08:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge. [ 0.254801] PCI host bridge to bus 0000:00 [ 0.254839] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.254879] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.254920] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.254961] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.255002] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.255044] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.255100] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.255249] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.255262] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.255269] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.255274] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f] [ 0.255441] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.255467] pci 0000:00:16.0: reg 0x10: [mem 0xf0705000-0xf070500f 64bit] [ 0.255551] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.255698] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.255722] pci 0000:00:1a.0: reg 0x10: [mem 0xf070a000-0xf070a3ff] [ 0.255821] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.255962] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.255980] pci 0000:00:1b.0: reg 0x10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.256057] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.256136] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.256241] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.256330] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.256412] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.256523] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.256610] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.256691] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.256796] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.256883] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.257035] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.257059] pci 0000:00:1d.0: reg 0x10: [mem 0xf0709000-0xf07093ff] [ 0.257163] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.257305] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.257541] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.257564] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f] [ 0.257574] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097] [ 0.257583] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087] [ 0.257593] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093] [ 0.257602] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f] [ 0.257612] pci 0000:00:1f.2: reg 0x24: [mem 0xf0708000-0xf07087ff] [ 0.257663] pci 0000:00:1f.2: PME# supported from D3hot [ 0.257794] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.257812] pci 0000:00:1f.3: reg 0x10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.257836] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf] [ 0.258217] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.258398] pci 0000:01:00.0: reg 0x10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.259132] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.259301] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.265290] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.265334] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.265502] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.265571] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff] [ 0.265689] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.265764] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.266091] pci 0000:02:00.0: supports D1 D2 [ 0.266093] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.266219] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.273225] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.273287] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.273296] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.273420] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.273458] pci 0000:03:00.0: reg 0x10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.273656] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.281195] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.281272] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.281453] \_SB_.PCI0:_OSC invalid UUID [ 0.281454] _OSC request data:1 1f 0 [ 0.281459] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.281515] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.282414] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.282759] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.283149] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.283492] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.283833] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.284203] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.284591] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.284933] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.285758] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.285835] ACPI: \_SB_.PCI0: notify handler is installed [ 0.285892] Found 1 acpi root devices [ 0.285958] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.286241] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.286299] vgaarb: loaded [ 0.286333] vgaarb: bridge control possible 0000:00:02.0 [ 0.287037] SCSI subsystem initialized [ 0.287074] ACPI: bus type ATA registered [ 0.287224] libata version 3.00 loaded. [ 0.287278] ACPI: bus type USB registered [ 0.287364] usbcore: registered new interface driver usbfs [ 0.287422] usbcore: registered new interface driver hub [ 0.287513] usbcore: registered new device driver usb [ 0.287899] PCI: Using ACPI for IRQ routing [ 0.289609] PCI: pci_cache_line_size set to 64 bytes [ 0.289715] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.289718] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.289720] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.289722] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.289964] NetLabel: Initializing [ 0.289999] NetLabel: domain hash size = 128 [ 0.290035] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.290120] NetLabel: unlabeled traffic allowed by default [ 0.290245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.290435] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.292497] Switched to clocksource hpet [ 0.309808] AppArmor: AppArmor Filesystem Enabled [ 0.309898] pnp: PnP ACPI init [ 0.309948] ACPI: bus type PNP registered [ 0.310395] pnp 00:00: [dma 4] [ 0.310437] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.310478] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.310646] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.310698] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.310775] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.310817] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.310857] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.310898] system 00:04: [io 0xffff] has been reserved [ 0.310940] system 00:04: [io 0x0400-0x0453] could not be reserved [ 0.310981] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.311022] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.311062] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.311103] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.311144] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.311186] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.311232] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.311320] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.311361] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.311420] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.311502] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.311808] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.311851] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.311893] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.311935] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.311977] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.312019] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.312060] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.312102] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.312144] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.312186] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.312229] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.312953] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.312991] pnp: PnP ACPI: found 11 devices [ 0.313027] ACPI: bus type PNP unregistered [ 0.321034] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.321078] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.321128] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.321168] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.321215] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.321276] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.321318] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.321775] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.321778] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.321780] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.321782] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.321784] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.321786] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.321788] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.321790] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.321792] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.321928] NET: Registered protocol family 2 [ 0.322337] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.322583] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.322901] TCP: Hash tables configured (established 32768 bind 32768) [ 0.323202] TCP: reno registered [ 0.323256] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.323365] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.323654] NET: Registered protocol family 1 [ 0.323710] pci 0000:00:02.0: Boot video device [ 0.324459] PCI: CLS 64 bytes, default 64 [ 0.324689] Trying to unpack rootfs image as initramfs... [ 0.400687] Freeing initrd memory: 3344K (ffff880037968000 - ffff880037cac000) [ 0.400747] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.400789] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.401201] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 0.401252] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 0.401303] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 0.401351] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 0.401473] microcode: Microcode Update Driver: v2.00 <tigran@aivazian•fsnet.co.uk>, Peter Oruba [ 0.401531] Scanning for low memory corruption every 60 seconds [ 0.402190] Initialise module verification [ 0.402292] audit: initializing netlink socket (disabled) [ 0.402852] type=2000 audit(1377177523.392:1): initialized [ 0.433805] bounce pool size: 64 pages [ 0.433866] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.434584] VFS: Disk quotas dquot_6.5.2 [ 0.434663] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.435535] fuse init (API version 7.22) [ 0.435675] msgmni has been set to 7698 [ 0.436377] Key type asymmetric registered [ 0.436434] Asymmetric key parser 'x509' registered [ 0.436519] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.436633] io scheduler noop registered [ 0.436671] io scheduler deadline registered (default) [ 0.436745] io scheduler cfq registered [ 0.437150] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.437229] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.437422] intel_idle: MWAIT substates: 0x21120 [ 0.437423] intel_idle: v0.4 model 0x2A [ 0.437425] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.438182] ACPI: AC Adapter [ADP1] (on-line) [ 0.438520] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.438774] ACPI: Lid Switch [LID0] [ 0.438881] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.438941] ACPI: Power Button [PWRB] [ 0.439041] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.439097] ACPI: Power Button [PWRF] [ 0.439230] ACPI: Fan [FAN0] (off) [ 0.439315] ACPI: Fan [FAN1] (off) [ 0.439397] ACPI: Fan [FAN2] (off) [ 0.439484] ACPI: Fan [FAN3] (off) [ 0.439569] ACPI: Fan [FAN4] (off) [ 0.439685] ACPI: Requesting acpi_cpufreq [ 0.443083] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.443126] ACPI: Thermal Zone [TZ00] (66 C) [ 0.443574] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.443614] ACPI: Thermal Zone [TZ01] (30 C) [ 0.443700] GHES: HEST is not enabled! [ 0.444033] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.449142] ACPI: Battery Slot [BAT1] (battery present) [ 0.449160] Linux agpgart interface v0.103 [ 0.451776] brd: module loaded [ 0.453086] loop: module loaded [ 0.453343] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.453390] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.456622] ahci 0000:00:1f.2: version 3.0 [ 0.456774] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.456970] ahci: SSS flag set, parallel bus scan disabled [ 0.472522] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.472592] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.472652] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.497340] scsi0 : ahci [ 0.497638] scsi1 : ahci [ 0.497826] scsi2 : ahci [ 0.498015] scsi3 : ahci [ 0.498199] scsi4 : ahci [ 0.498384] scsi5 : ahci [ 0.498495] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.498548] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.498601] ata3: DUMMY [ 0.498633] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.498685] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.498737] ata6: DUMMY [ 0.499785] libphy: Fixed MDIO Bus: probed [ 0.500098] tun: Universal TUN/TAP device driver, 1.6 [ 0.500136] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm•com> [ 0.500274] PPP generic driver version 2.4.2 [ 0.500452] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.500494] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.500502] ehci-pci: EHCI PCI platform driver [ 0.500746] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.500756] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.500800] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.500872] ehci-pci 0000:00:1a.0: debug port 2 [ 0.500912] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.500916] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.500953] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.504844] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.504846] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.504894] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.504937] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.516369] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.516515] usb usb1: default language 0x0409 [ 0.516536] usb usb1: udev 1, busnum 1, minor = 0 [ 0.516538] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.516578] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.516630] usb usb1: Product: EHCI Host Controller [ 0.516667] usb usb1: Manufacturer: Linux 3.11.0-rc6-next20130821-1-iniza-small ehci_hcd [ 0.516721] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.516920] usb usb1: usb_probe_device [ 0.516923] usb usb1: configuration #1 chosen from 1 choice [ 0.516935] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.516965] hub 1-0:1.0: usb_probe_interface [ 0.516967] hub 1-0:1.0: usb_probe_interface - got id [ 0.516969] hub 1-0:1.0: USB hub found [ 0.517012] hub 1-0:1.0: 2 ports detected [ 0.517047] hub 1-0:1.0: standalone hub [ 0.517048] hub 1-0:1.0: no power switching (usb 1.0) [ 0.517050] hub 1-0:1.0: individual port over-current protection [ 0.517051] hub 1-0:1.0: power on to power good time: 20ms [ 0.517062] hub 1-0:1.0: local power source is good [ 0.517108] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.517338] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.517344] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.517386] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.517452] ehci-pci 0000:00:1d.0: debug port 2 [ 0.517490] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.517494] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.517525] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.521402] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.521403] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.521443] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.521484] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.532343] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.532442] usb usb2: default language 0x0409 [ 0.532462] usb usb2: udev 1, busnum 2, minor = 128 [ 0.532464] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.532504] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.532556] usb usb2: Product: EHCI Host Controller [ 0.532592] usb usb2: Manufacturer: Linux 3.11.0-rc6-next20130821-1-iniza-small ehci_hcd [ 0.532646] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.532835] usb usb2: usb_probe_device [ 0.532837] usb usb2: configuration #1 chosen from 1 choice [ 0.532849] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.532876] hub 2-0:1.0: usb_probe_interface [ 0.532877] hub 2-0:1.0: usb_probe_interface - got id [ 0.532879] hub 2-0:1.0: USB hub found [ 0.532924] hub 2-0:1.0: 2 ports detected [ 0.532959] hub 2-0:1.0: standalone hub [ 0.532960] hub 2-0:1.0: no power switching (usb 1.0) [ 0.532961] hub 2-0:1.0: individual port over-current protection [ 0.532963] hub 2-0:1.0: power on to power good time: 20ms [ 0.532973] hub 2-0:1.0: local power source is good [ 0.533016] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.533089] ehci-platform: EHCI generic platform driver [ 0.533140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.533179] ohci_hcd: block sizes: ed 80 td 96 [ 0.533184] ohci-pci: OHCI PCI platform driver [ 0.533235] ohci-platform: OHCI generic platform driver [ 0.533286] uhci_hcd: USB Universal Host Controller Interface driver [ 0.533530] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.533572] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.533651] xhci_hcd 0000:03:00.0: xHCI capability registers at ffffc90000650000: [ 0.533654] xhci_hcd 0000:03:00.0: CAPLENGTH AND HCIVERSION 0x960020: [ 0.533656] xhci_hcd 0000:03:00.0: CAPLENGTH: 0x20 [ 0.533657] xhci_hcd 0000:03:00.0: HCIVERSION: 0x96 [ 0.533661] xhci_hcd 0000:03:00.0: HCSPARAMS 1: 0x4000820 [ 0.533662] xhci_hcd 0000:03:00.0: Max device slots: 32 [ 0.533664] xhci_hcd 0000:03:00.0: Max interrupters: 8 [ 0.533665] xhci_hcd 0000:03:00.0: Max ports: 4 [ 0.533668] xhci_hcd 0000:03:00.0: HCSPARAMS 2: 0x17f1 [ 0.533670] xhci_hcd 0000:03:00.0: Isoc scheduling threshold: 1 [ 0.533671] xhci_hcd 0000:03:00.0: Maximum allowed segments in event ring: 15 [ 0.533675] xhci_hcd 0000:03:00.0: HCSPARAMS 3 0x0: [ 0.533676] xhci_hcd 0000:03:00.0: Worst case U1 device exit latency: 0 [ 0.533677] xhci_hcd 0000:03:00.0: Worst case U2 device exit latency: 0 [ 0.533681] xhci_hcd 0000:03:00.0: HCC PARAMS 0x200f180: [ 0.533682] xhci_hcd 0000:03:00.0: HC generates 32 bit addresses [ 0.533684] xhci_hcd 0000:03:00.0: FIXME: more HCCPARAMS debugging [ 0.533687] xhci_hcd 0000:03:00.0: RTSOFF 0x1000: [ 0.533689] xhci_hcd 0000:03:00.0: xHCI operational registers at ffffc90000650020: [ 0.533692] xhci_hcd 0000:03:00.0: USBCMD 0x0: [ 0.533694] xhci_hcd 0000:03:00.0: HC is being stopped [ 0.533695] xhci_hcd 0000:03:00.0: HC has finished hard reset [ 0.533696] xhci_hcd 0000:03:00.0: Event Interrupts disabled [ 0.533698] xhci_hcd 0000:03:00.0: Host System Error Interrupts disabled [ 0.533699] xhci_hcd 0000:03:00.0: HC has finished light reset [ 0.533702] xhci_hcd 0000:03:00.0: USBSTS 0x9: [ 0.533703] xhci_hcd 0000:03:00.0: Event ring is not empty [ 0.533705] xhci_hcd 0000:03:00.0: No Host System Error [ 0.533706] xhci_hcd 0000:03:00.0: HC is halted [ 0.533710] xhci_hcd 0000:03:00.0: ffffc90000650420 port status reg = 0x1203 [ 0.533714] xhci_hcd 0000:03:00.0: ffffc90000650424 port power reg = 0x0 [ 0.533717] xhci_hcd 0000:03:00.0: ffffc90000650428 port link reg = 0x0 [ 0.533721] xhci_hcd 0000:03:00.0: ffffc9000065042c port reserved reg = 0x0 [ 0.533725] xhci_hcd 0000:03:00.0: ffffc90000650430 port status reg = 0x2a0 [ 0.533728] xhci_hcd 0000:03:00.0: ffffc90000650434 port power reg = 0x0 [ 0.533732] xhci_hcd 0000:03:00.0: ffffc90000650438 port link reg = 0x0 [ 0.533735] xhci_hcd 0000:03:00.0: ffffc9000065043c port reserved reg = 0x0 [ 0.533739] xhci_hcd 0000:03:00.0: ffffc90000650440 port status reg = 0x2a0 [ 0.533743] xhci_hcd 0000:03:00.0: ffffc90000650444 port power reg = 0x0 [ 0.533746] xhci_hcd 0000:03:00.0: ffffc90000650448 port link reg = 0x0 [ 0.533750] xhci_hcd 0000:03:00.0: ffffc9000065044c port reserved reg = 0x0 [ 0.533754] xhci_hcd 0000:03:00.0: ffffc90000650450 port status reg = 0x2a0 [ 0.533757] xhci_hcd 0000:03:00.0: ffffc90000650454 port power reg = 0x0 [ 0.533761] xhci_hcd 0000:03:00.0: ffffc90000650458 port link reg = 0x0 [ 0.533764] xhci_hcd 0000:03:00.0: ffffc9000065045c port reserved reg = 0x0 [ 0.533766] xhci_hcd 0000:03:00.0: // Halt the HC [ 0.533773] xhci_hcd 0000:03:00.0: Resetting HCD [ 0.533777] xhci_hcd 0000:03:00.0: // Reset the HC [ 0.543316] xhci_hcd 0000:03:00.0: Wait for controller to be ready for doorbell rings [ 0.543320] xhci_hcd 0000:03:00.0: Reset complete [ 0.543321] xhci_hcd 0000:03:00.0: Calling HCD init [ 0.543323] xhci_hcd 0000:03:00.0: xhci_init [ 0.543325] xhci_hcd 0000:03:00.0: xHCI doesn't need link TRB QUIRK [ 0.543329] xhci_hcd 0000:03:00.0: Supported page size register = 0x1 [ 0.543331] xhci_hcd 0000:03:00.0: Supported page size of 4K [ 0.543332] xhci_hcd 0000:03:00.0: HCD page size set to 4K [ 0.543336] xhci_hcd 0000:03:00.0: // xHC can handle at most 32 device slots. [ 0.543340] xhci_hcd 0000:03:00.0: // Setting Max device slots reg = 0x20. [ 0.543344] xhci_hcd 0000:03:00.0: // Device context base array address = 0x3797e000 (DMA), ffff88003797e000 (virt) [ 0.543353] xhci_hcd 0000:03:00.0: Allocated command ring at ffff8800379549c0 [ 0.543355] xhci_hcd 0000:03:00.0: First segment DMA is 0x3797f000 [ 0.543361] xhci_hcd 0000:03:00.0: // Setting command ring address to 0x20 [ 0.543367] xhci_hcd 0000:03:00.0: // xHC command ring deq ptr low bits + flags = @00000000 [ 0.543368] xhci_hcd 0000:03:00.0: // xHC command ring deq ptr high bits = @00000000 [ 0.543379] xhci_hcd 0000:03:00.0: // Doorbell array is located at offset 0x1800 from cap regs base addr [ 0.543381] xhci_hcd 0000:03:00.0: // xHCI capability registers at ffffc90000650000: [ 0.543385] xhci_hcd 0000:03:00.0: // @ffffc90000650000 = 0x960020 (CAPLENGTH AND HCIVERSION) [ 0.543387] xhci_hcd 0000:03:00.0: // CAPLENGTH: 0x20 [ 0.543388] xhci_hcd 0000:03:00.0: // xHCI operational registers at ffffc90000650020: [ 0.543392] xhci_hcd 0000:03:00.0: // @ffffc90000650018 = 0x1000 RTSOFF [ 0.543394] xhci_hcd 0000:03:00.0: // xHCI runtime registers at ffffc90000651000: [ 0.543398] xhci_hcd 0000:03:00.0: // @ffffc90000650014 = 0x1800 DBOFF [ 0.543400] xhci_hcd 0000:03:00.0: // Doorbell array at ffffc90000651800: [ 0.543401] xhci_hcd 0000:03:00.0: xHCI runtime registers at ffffc90000651000: [ 0.543406] xhci_hcd 0000:03:00.0: ffffc90000651000: Microframe index = 0x0 [ 0.543423] xhci_hcd 0000:03:00.0: // Allocating event ring [ 0.543429] xhci_hcd 0000:03:00.0: TRB math tests passed. [ 0.543432] xhci_hcd 0000:03:00.0: // Allocated event ring segment table at 0x37981000 [ 0.543434] xhci_hcd 0000:03:00.0: Set ERST to 0; private num segs = 1, virt addr = ffff880037981000, dma addr = 0x37981000 [ 0.543438] xhci_hcd 0000:03:00.0: // Write ERST size = 1 to ir_set 0 (some bits preserved) [ 0.543440] xhci_hcd 0000:03:00.0: // Set ERST entries to point to event ring. [ 0.543441] xhci_hcd 0000:03:00.0: // Set ERST base address for ir_set 0 = 0x37981000 [ 0.543452] xhci_hcd 0000:03:00.0: // Write event ring dequeue pointer, preserving EHB bit [ 0.543454] xhci_hcd 0000:03:00.0: Wrote ERST address to ir_set 0. [ 0.543458] xhci_hcd 0000:03:00.0: Allocating 0 scratchpad buffers [ 0.543484] xhci_hcd 0000:03:00.0: Ext Cap ffffc90000650810, port offset = 1, count = 2, revision = 0x3 [ 0.543491] xhci_hcd 0000:03:00.0: Ext Cap ffffc90000650820, port offset = 3, count = 2, revision = 0x2 [ 0.543493] xhci_hcd 0000:03:00.0: xHCI 0.96: support USB2 software lpm [ 0.543494] xhci_hcd 0000:03:00.0: Found 2 USB 2.0 ports and 2 USB 3.0 ports. [ 0.543497] xhci_hcd 0000:03:00.0: USB 2.0 port at index 2, addr = ffffc90000650440 [ 0.543499] xhci_hcd 0000:03:00.0: USB 2.0 port at index 3, addr = ffffc90000650450 [ 0.543501] xhci_hcd 0000:03:00.0: USB 3.0 port at index 0, addr = ffffc90000650420 [ 0.543503] xhci_hcd 0000:03:00.0: USB 3.0 port at index 1, addr = ffffc90000650430 [ 0.543507] xhci_hcd 0000:03:00.0: Finished xhci_init [ 0.543508] xhci_hcd 0000:03:00.0: Called HCD init [ 0.543513] xhci_hcd 0000:03:00.0: Got SBRN 48 [ 0.543522] xhci_hcd 0000:03:00.0: MWI active [ 0.543523] xhci_hcd 0000:03:00.0: Finished xhci_pci_reinit [ 0.543525] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.543527] xhci_hcd 0000:03:00.0: xhci_run [ 0.543562] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.543569] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.543577] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.543586] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.543594] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.543827] xhci_hcd 0000:03:00.0: Command ring memory map follows: [ 0.543830] xhci_hcd 0000:03:00.0: @000000003797f000 00000000 00000000 00000000 00000000 [ 0.543832] xhci_hcd 0000:03:00.0: @000000003797f010 00000000 00000000 00000000 00000000 [ 0.543834] xhci_hcd 0000:03:00.0: @000000003797f020 00000000 00000000 00000000 00000000 [ 0.543836] xhci_hcd 0000:03:00.0: @000000003797f030 00000000 00000000 00000000 00000000 [ 0.543838] xhci_hcd 0000:03:00.0: @000000003797f040 00000000 00000000 00000000 00000000 [ 0.543840] xhci_hcd 0000:03:00.0: @000000003797f050 00000000 00000000 00000000 00000000 [ 0.543842] xhci_hcd 0000:03:00.0: @000000003797f060 00000000 00000000 00000000 00000000 [ 0.543844] xhci_hcd 0000:03:00.0: @000000003797f070 00000000 00000000 00000000 00000000 [ 0.543845] xhci_hcd 0000:03:00.0: @000000003797f080 00000000 00000000 00000000 00000000 [ 0.543847] xhci_hcd 0000:03:00.0: @000000003797f090 00000000 00000000 00000000 00000000 [ 0.543849] xhci_hcd 0000:03:00.0: @000000003797f0a0 00000000 00000000 00000000 00000000 [ 0.543851] xhci_hcd 0000:03:00.0: @000000003797f0b0 00000000 00000000 00000000 00000000 [ 0.543853] xhci_hcd 0000:03:00.0: @000000003797f0c0 00000000 00000000 00000000 00000000 [ 0.543855] xhci_hcd 0000:03:00.0: @000000003797f0d0 00000000 00000000 00000000 00000000 [ 0.543857] xhci_hcd 0000:03:00.0: @000000003797f0e0 00000000 00000000 00000000 00000000 [ 0.543859] xhci_hcd 0000:03:00.0: @000000003797f0f0 00000000 00000000 00000000 00000000 [ 0.543861] xhci_hcd 0000:03:00.0: @000000003797f100 00000000 00000000 00000000 00000000 [ 0.543863] xhci_hcd 0000:03:00.0: @000000003797f110 00000000 00000000 00000000 00000000 [ 0.543865] xhci_hcd 0000:03:00.0: @000000003797f120 00000000 00000000 00000000 00000000 [ 0.543867] xhci_hcd 0000:03:00.0: @000000003797f130 00000000 00000000 00000000 00000000 [ 0.543869] xhci_hcd 0000:03:00.0: @000000003797f140 00000000 00000000 00000000 00000000 [ 0.543871] xhci_hcd 0000:03:00.0: @000000003797f150 00000000 00000000 00000000 00000000 [ 0.543873] xhci_hcd 0000:03:00.0: @000000003797f160 00000000 00000000 00000000 00000000 [ 0.543875] xhci_hcd 0000:03:00.0: @000000003797f170 00000000 00000000 00000000 00000000 [ 0.543877] xhci_hcd 0000:03:00.0: @000000003797f180 00000000 00000000 00000000 00000000 [ 0.543879] xhci_hcd 0000:03:00.0: @000000003797f190 00000000 00000000 00000000 00000000 [ 0.543881] xhci_hcd 0000:03:00.0: @000000003797f1a0 00000000 00000000 00000000 00000000 [ 0.543882] xhci_hcd 0000:03:00.0: @000000003797f1b0 00000000 00000000 00000000 00000000 [ 0.543884] xhci_hcd 0000:03:00.0: @000000003797f1c0 00000000 00000000 00000000 00000000 [ 0.543886] xhci_hcd 0000:03:00.0: @000000003797f1d0 00000000 00000000 00000000 00000000 [ 0.543888] xhci_hcd 0000:03:00.0: @000000003797f1e0 00000000 00000000 00000000 00000000 [ 0.543890] xhci_hcd 0000:03:00.0: @000000003797f1f0 00000000 00000000 00000000 00000000 [ 0.543892] xhci_hcd 0000:03:00.0: @000000003797f200 00000000 00000000 00000000 00000000 [ 0.543894] xhci_hcd 0000:03:00.0: @000000003797f210 00000000 00000000 00000000 00000000 [ 0.543896] xhci_hcd 0000:03:00.0: @000000003797f220 00000000 00000000 00000000 00000000 [ 0.543898] xhci_hcd 0000:03:00.0: @000000003797f230 00000000 00000000 00000000 00000000 [ 0.543900] xhci_hcd 0000:03:00.0: @000000003797f240 00000000 00000000 00000000 00000000 [ 0.543902] xhci_hcd 0000:03:00.0: @000000003797f250 00000000 00000000 00000000 00000000 [ 0.543904] xhci_hcd 0000:03:00.0: @000000003797f260 00000000 00000000 00000000 00000000 [ 0.543906] xhci_hcd 0000:03:00.0: @000000003797f270 00000000 00000000 00000000 00000000 [ 0.543908] xhci_hcd 0000:03:00.0: @000000003797f280 00000000 00000000 00000000 00000000 [ 0.543910] xhci_hcd 0000:03:00.0: @000000003797f290 00000000 00000000 00000000 00000000 [ 0.543912] xhci_hcd 0000:03:00.0: @000000003797f2a0 00000000 00000000 00000000 00000000 [ 0.543914] xhci_hcd 0000:03:00.0: @000000003797f2b0 00000000 00000000 00000000 00000000 [ 0.543916] xhci_hcd 0000:03:00.0: @000000003797f2c0 00000000 00000000 00000000 00000000 [ 0.543917] xhci_hcd 0000:03:00.0: @000000003797f2d0 00000000 00000000 00000000 00000000 [ 0.543919] xhci_hcd 0000:03:00.0: @000000003797f2e0 00000000 00000000 00000000 00000000 [ 0.543921] xhci_hcd 0000:03:00.0: @000000003797f2f0 00000000 00000000 00000000 00000000 [ 0.543923] xhci_hcd 0000:03:00.0: @000000003797f300 00000000 00000000 00000000 00000000 [ 0.543925] xhci_hcd 0000:03:00.0: @000000003797f310 00000000 00000000 00000000 00000000 [ 0.543927] xhci_hcd 0000:03:00.0: @000000003797f320 00000000 00000000 00000000 00000000 [ 0.543929] xhci_hcd 0000:03:00.0: @000000003797f330 00000000 00000000 00000000 00000000 [ 0.543931] xhci_hcd 0000:03:00.0: @000000003797f340 00000000 00000000 00000000 00000000 [ 0.543933] xhci_hcd 0000:03:00.0: @000000003797f350 00000000 00000000 00000000 00000000 [ 0.543935] xhci_hcd 0000:03:00.0: @000000003797f360 00000000 00000000 00000000 00000000 [ 0.543937] xhci_hcd 0000:03:00.0: @000000003797f370 00000000 00000000 00000000 00000000 [ 0.543939] xhci_hcd 0000:03:00.0: @000000003797f380 00000000 00000000 00000000 00000000 [ 0.543941] xhci_hcd 0000:03:00.0: @000000003797f390 00000000 00000000 00000000 00000000 [ 0.543943] xhci_hcd 0000:03:00.0: @000000003797f3a0 00000000 00000000 00000000 00000000 [ 0.543945] xhci_hcd 0000:03:00.0: @000000003797f3b0 00000000 00000000 00000000 00000000 [ 0.543946] xhci_hcd 0000:03:00.0: @000000003797f3c0 00000000 00000000 00000000 00000000 [ 0.543948] xhci_hcd 0000:03:00.0: @000000003797f3d0 00000000 00000000 00000000 00000000 [ 0.543950] xhci_hcd 0000:03:00.0: @000000003797f3e0 00000000 00000000 00000000 00000000 [ 0.543952] xhci_hcd 0000:03:00.0: @000000003797f3f0 3797f000 00000000 00000000 00001802 [ 0.543954] xhci_hcd 0000:03:00.0: Ring has not been updated [ 0.543956] xhci_hcd 0000:03:00.0: Ring deq = ffff88003797f000 (virt), 0x3797f000 (dma) [ 0.543958] xhci_hcd 0000:03:00.0: Ring deq updated 0 times [ 0.543960] xhci_hcd 0000:03:00.0: Ring enq = ffff88003797f000 (virt), 0x3797f000 (dma) [ 0.543961] xhci_hcd 0000:03:00.0: Ring enq updated 0 times [ 0.543968] xhci_hcd 0000:03:00.0: // xHC command ring deq ptr low bits + flags = @00000000 [ 0.543969] xhci_hcd 0000:03:00.0: // xHC command ring deq ptr high bits = @00000000 [ 0.543971] xhci_hcd 0000:03:00.0: ERST memory map follows: [ 0.543973] xhci_hcd 0000:03:00.0: @0000000037981000 3797f400 00000000 00000040 00000000 [ 0.543975] xhci_hcd 0000:03:00.0: Event ring: [ 0.543977] xhci_hcd 0000:03:00.0: @000000003797f400 00000000 00000000 00000000 00000000 [ 0.543978] xhci_hcd 0000:03:00.0: @000000003797f410 00000000 00000000 00000000 00000000 [ 0.543980] xhci_hcd 0000:03:00.0: @000000003797f420 00000000 00000000 00000000 00000000 [ 0.543982] xhci_hcd 0000:03:00.0: @000000003797f430 00000000 00000000 00000000 00000000 [ 0.543984] xhci_hcd 0000:03:00.0: @000000003797f440 00000000 00000000 00000000 00000000 [ 0.543986] xhci_hcd 0000:03:00.0: @000000003797f450 00000000 00000000 00000000 00000000 [ 0.543988] xhci_hcd 0000:03:00.0: @000000003797f460 00000000 00000000 00000000 00000000 [ 0.543990] xhci_hcd 0000:03:00.0: @000000003797f470 00000000 00000000 00000000 00000000 [ 0.543992] xhci_hcd 0000:03:00.0: @000000003797f480 00000000 00000000 00000000 00000000 [ 0.543994] xhci_hcd 0000:03:00.0: @000000003797f490 00000000 00000000 00000000 00000000 [ 0.543996] xhci_hcd 0000:03:00.0: @000000003797f4a0 00000000 00000000 00000000 00000000 [ 0.543998] xhci_hcd 0000:03:00.0: @000000003797f4b0 00000000 00000000 00000000 00000000 [ 0.544000] xhci_hcd 0000:03:00.0: @000000003797f4c0 00000000 00000000 00000000 00000000 [ 0.544002] xhci_hcd 0000:03:00.0: @000000003797f4d0 00000000 00000000 00000000 00000000 [ 0.544004] xhci_hcd 0000:03:00.0: @000000003797f4e0 00000000 00000000 00000000 00000000 [ 0.544005] xhci_hcd 0000:03:00.0: @000000003797f4f0 00000000 00000000 00000000 00000000 [ 0.544007] xhci_hcd 0000:03:00.0: @000000003797f500 00000000 00000000 00000000 00000000 [ 0.544009] xhci_hcd 0000:03:00.0: @000000003797f510 00000000 00000000 00000000 00000000 [ 0.544011] xhci_hcd 0000:03:00.0: @000000003797f520 00000000 00000000 00000000 00000000 [ 0.544013] xhci_hcd 0000:03:00.0: @000000003797f530 00000000 00000000 00000000 00000000 [ 0.544015] xhci_hcd 0000:03:00.0: @000000003797f540 00000000 00000000 00000000 00000000 [ 0.544017] xhci_hcd 0000:03:00.0: @000000003797f550 00000000 00000000 00000000 00000000 [ 0.544019] xhci_hcd 0000:03:00.0: @000000003797f560 00000000 00000000 00000000 00000000 [ 0.544021] xhci_hcd 0000:03:00.0: @000000003797f570 00000000 00000000 00000000 00000000 [ 0.544023] xhci_hcd 0000:03:00.0: @000000003797f580 00000000 00000000 00000000 00000000 [ 0.544025] xhci_hcd 0000:03:00.0: @000000003797f590 00000000 00000000 00000000 00000000 [ 0.544027] xhci_hcd 0000:03:00.0: @000000003797f5a0 00000000 00000000 00000000 00000000 [ 0.544029] xhci_hcd 0000:03:00.0: @000000003797f5b0 00000000 00000000 00000000 00000000 [ 0.544031] xhci_hcd 0000:03:00.0: @000000003797f5c0 00000000 00000000 00000000 00000000 [ 0.544033] xhci_hcd 0000:03:00.0: @000000003797f5d0 00000000 00000000 00000000 00000000 [ 0.544035] xhci_hcd 0000:03:00.0: @000000003797f5e0 00000000 00000000 00000000 00000000 [ 0.544037] xhci_hcd 0000:03:00.0: @000000003797f5f0 00000000 00000000 00000000 00000000 [ 0.544038] xhci_hcd 0000:03:00.0: @000000003797f600 00000000 00000000 00000000 00000000 [ 0.544040] xhci_hcd 0000:03:00.0: @000000003797f610 00000000 00000000 00000000 00000000 [ 0.544042] xhci_hcd 0000:03:00.0: @000000003797f620 00000000 00000000 00000000 00000000 [ 0.544044] xhci_hcd 0000:03:00.0: @000000003797f630 00000000 00000000 00000000 00000000 [ 0.544046] xhci_hcd 0000:03:00.0: @000000003797f640 00000000 00000000 00000000 00000000 [ 0.544048] xhci_hcd 0000:03:00.0: @000000003797f650 00000000 00000000 00000000 00000000 [ 0.544050] xhci_hcd 0000:03:00.0: @000000003797f660 00000000 00000000 00000000 00000000 [ 0.544052] xhci_hcd 0000:03:00.0: @000000003797f670 00000000 00000000 00000000 00000000 [ 0.544054] xhci_hcd 0000:03:00.0: @000000003797f680 00000000 00000000 00000000 00000000 [ 0.544056] xhci_hcd 0000:03:00.0: @000000003797f690 00000000 00000000 00000000 00000000 [ 0.544058] xhci_hcd 0000:03:00.0: @000000003797f6a0 00000000 00000000 00000000 00000000 [ 0.544060] xhci_hcd 0000:03:00.0: @000000003797f6b0 00000000 00000000 00000000 00000000 [ 0.544062] xhci_hcd 0000:03:00.0: @000000003797f6c0 00000000 00000000 00000000 00000000 [ 0.544063] xhci_hcd 0000:03:00.0: @000000003797f6d0 00000000 00000000 00000000 00000000 [ 0.544065] xhci_hcd 0000:03:00.0: @000000003797f6e0 00000000 00000000 00000000 00000000 [ 0.544067] xhci_hcd 0000:03:00.0: @000000003797f6f0 00000000 00000000 00000000 00000000 [ 0.544069] xhci_hcd 0000:03:00.0: @000000003797f700 00000000 00000000 00000000 00000000 [ 0.544071] xhci_hcd 0000:03:00.0: @000000003797f710 00000000 00000000 00000000 00000000 [ 0.544073] xhci_hcd 0000:03:00.0: @000000003797f720 00000000 00000000 00000000 00000000 [ 0.544075] xhci_hcd 0000:03:00.0: @000000003797f730 00000000 00000000 00000000 00000000 [ 0.544077] xhci_hcd 0000:03:00.0: @000000003797f740 00000000 00000000 00000000 00000000 [ 0.544079] xhci_hcd 0000:03:00.0: @000000003797f750 00000000 00000000 00000000 00000000 [ 0.544081] xhci_hcd 0000:03:00.0: @000000003797f760 00000000 00000000 00000000 00000000 [ 0.544083] xhci_hcd 0000:03:00.0: @000000003797f770 00000000 00000000 00000000 00000000 [ 0.544085] xhci_hcd 0000:03:00.0: @000000003797f780 00000000 00000000 00000000 00000000 [ 0.544087] xhci_hcd 0000:03:00.0: @000000003797f790 00000000 00000000 00000000 00000000 [ 0.544089] xhci_hcd 0000:03:00.0: @000000003797f7a0 00000000 00000000 00000000 00000000 [ 0.544091] xhci_hcd 0000:03:00.0: @000000003797f7b0 00000000 00000000 00000000 00000000 [ 0.544092] xhci_hcd 0000:03:00.0: @000000003797f7c0 00000000 00000000 00000000 00000000 [ 0.544094] xhci_hcd 0000:03:00.0: @000000003797f7d0 00000000 00000000 00000000 00000000 [ 0.544096] xhci_hcd 0000:03:00.0: @000000003797f7e0 00000000 00000000 00000000 00000000 [ 0.544098] xhci_hcd 0000:03:00.0: @000000003797f7f0 00000000 00000000 00000000 00000000 [ 0.544100] xhci_hcd 0000:03:00.0: Ring has not been updated [ 0.544102] xhci_hcd 0000:03:00.0: Ring deq = ffff88003797f400 (virt), 0x3797f400 (dma) [ 0.544103] xhci_hcd 0000:03:00.0: Ring deq updated 0 times [ 0.544105] xhci_hcd 0000:03:00.0: Ring enq = ffff88003797f400 (virt), 0x3797f400 (dma) [ 0.544107] xhci_hcd 0000:03:00.0: Ring enq updated 0 times [ 0.544113] xhci_hcd 0000:03:00.0: ERST deq = 64'h3797f400 [ 0.544114] xhci_hcd 0000:03:00.0: // Set the interrupt modulation register [ 0.544120] xhci_hcd 0000:03:00.0: // Enable interrupts, cmd = 0x4. [ 0.544124] xhci_hcd 0000:03:00.0: // Enabling event ring interrupter ffffc90000651020 by writing 0x2 to irq_pending [ 0.544129] xhci_hcd 0000:03:00.0: ffffc90000651020: ir_set[0] [ 0.544130] xhci_hcd 0000:03:00.0: ffffc90000651020: ir_set.pending = 0x2 [ 0.544142] xhci_hcd 0000:03:00.0: ffffc90000651024: ir_set.control = 0xa0 [ 0.544146] xhci_hcd 0000:03:00.0: ffffc90000651028: ir_set.erst_size = 0x1 [ 0.544154] xhci_hcd 0000:03:00.0: ffffc90000651030: ir_set.erst_base = @37981000 [ 0.544160] xhci_hcd 0000:03:00.0: ffffc90000651038: ir_set.erst_dequeue = @3797f400 [ 0.544161] xhci_hcd 0000:03:00.0: Finished xhci_run for USB2 roothub [ 0.544189] usb usb3: default language 0x0409 [ 0.544208] usb usb3: udev 1, busnum 3, minor = 256 [ 0.544210] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.544250] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.544310] usb usb3: Product: xHCI Host Controller [ 0.544364] usb usb3: Manufacturer: Linux 3.11.0-rc6-next20130821-1-iniza-small xhci_hcd [ 0.544425] usb usb3: SerialNumber: 0000:03:00.0 [ 0.544611] usb usb3: usb_probe_device [ 0.544613] usb usb3: configuration #1 chosen from 1 choice [ 0.544617] xHCI xhci_add_endpoint called for root hub [ 0.544618] xHCI xhci_check_bandwidth called for root hub [ 0.544629] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.544657] hub 3-0:1.0: usb_probe_interface [ 0.544659] hub 3-0:1.0: usb_probe_interface - got id [ 0.544661] hub 3-0:1.0: USB hub found [ 0.544709] hub 3-0:1.0: 2 ports detected [ 0.544745] hub 3-0:1.0: standalone hub [ 0.544746] hub 3-0:1.0: no power switching (usb 1.0) [ 0.544747] hub 3-0:1.0: individual port over-current protection [ 0.544748] hub 3-0:1.0: Single TT [ 0.544750] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.544751] hub 3-0:1.0: power on to power good time: 20ms [ 0.544761] hub 3-0:1.0: local power source is good [ 0.544793] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.544801] xhci_hcd 0000:03:00.0: set port power, actual port 0 status = 0x2a0 [ 0.544814] xhci_hcd 0000:03:00.0: set port power, actual port 1 status = 0x2a0 [ 0.544865] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.544905] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.544963] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.544967] xhci_hcd 0000:03:00.0: // Turn on HC, cmd = 0x5. [ 0.544977] xhci_hcd 0000:03:00.0: Finished xhci_run for USB3 roothub [ 0.545013] usb usb4: skipped 1 descriptor after endpoint [ 0.545021] usb usb4: default language 0x0409 [ 0.545040] usb usb4: udev 1, busnum 4, minor = 384 [ 0.545042] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.545082] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.545133] usb usb4: Product: xHCI Host Controller [ 0.545169] usb usb4: Manufacturer: Linux 3.11.0-rc6-next20130821-1-iniza-small xhci_hcd [ 0.545223] usb usb4: SerialNumber: 0000:03:00.0 [ 0.545403] usb usb4: usb_probe_device [ 0.545405] usb usb4: configuration #1 chosen from 1 choice [ 0.545408] xHCI xhci_add_endpoint called for root hub [ 0.545409] xHCI xhci_check_bandwidth called for root hub [ 0.545418] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.545445] hub 4-0:1.0: usb_probe_interface [ 0.545446] hub 4-0:1.0: usb_probe_interface - got id [ 0.545448] hub 4-0:1.0: USB hub found [ 0.545497] hub 4-0:1.0: 2 ports detected [ 0.545532] hub 4-0:1.0: standalone hub [ 0.545533] hub 4-0:1.0: no power switching (usb 1.0) [ 0.545534] hub 4-0:1.0: individual port over-current protection [ 0.545536] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.545537] hub 4-0:1.0: power on to power good time: 20ms [ 0.545547] hub 4-0:1.0: local power source is good [ 0.545575] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.545582] xhci_hcd 0000:03:00.0: set port power, actual port 0 status = 0x2a0 [ 0.545595] xhci_hcd 0000:03:00.0: set port power, actual port 1 status = 0x2a0 [ 0.556543] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.562936] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.562978] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.563395] mousedev: PS/2 mouse device common for all mice [ 0.564058] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.564136] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.564326] device-mapper: uevent: version 1.0.3 [ 0.564518] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat•com [ 0.564586] Intel P-state driver initializing. [ 0.564634] Intel pstate controlling: cpu 0 [ 0.564708] Intel pstate controlling: cpu 1 [ 0.564777] Intel pstate controlling: cpu 2 [ 0.564842] Intel pstate controlling: cpu 3 [ 0.564955] ledtrig-cpu: registered to indicate activity on CPUs [ 0.565344] ashmem: initialized [ 0.565581] TCP: cubic registered [ 0.565790] NET: Registered protocol family 10 [ 0.566299] NET: Registered protocol family 17 [ 0.566352] Key type dns_resolver registered [ 0.566820] PM: Hibernation image not present or could not be loaded. [ 0.566826] Loading module verification certificates [ 0.567934] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 2cc6cde21be0bdd4ba50309970aed567d305e6c9' [ 0.568019] registered taskstats version 1 [ 0.570977] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.571976] Key type trusted registered [ 0.578592] Key type encrypted registered [ 0.585155] AppArmor: AppArmor sha1 policy hashing enabled [ 0.585797] rtc_cmos 00:05: setting system clock to 2013-08-22 13:18:44 UTC (1377177524) [ 0.586287] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.586327] EDD information not available. [ 0.616511] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.616550] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.632394] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.632439] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.644394] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 0.644403] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 0.644435] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 0.644439] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 0.644467] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2e0 [ 0.644470] xhci_hcd 0000:03:00.0: Get port status returned 0x2e0 [ 0.644488] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 0.644491] xhci_hcd 0000:03:00.0: Get port status returned 0x2a0 [ 0.644514] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.644536] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.644564] hub 3-0:1.0: hub_suspend [ 0.644593] usb usb3: bus auto-suspend, wakeup 1 [ 0.644612] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 0.644635] xhci_hcd 0000:03:00.0: set port remote wake mask, actual port 0 status = 0xe0002e0 [ 0.644664] xhci_hcd 0000:03:00.0: set port remote wake mask, actual port 1 status = 0xe0002a0 [ 0.644679] hub 4-0:1.0: hub_suspend [ 0.644691] usb usb4: bus auto-suspend, wakeup 1 [ 0.644704] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 0.653074] xhci_hcd 0000:03:00.0: Port Status Change Event for port 1 [ 0.653084] xhci_hcd 0000:03:00.0: resume root hub [ 0.653100] xhci_hcd 0000:03:00.0: handle_port_status: starting port polling. [ 0.653140] usb usb4: usb wakeup-resume [ 0.653146] usb usb4: usb auto-resume [ 0.664356] hub 4-0:1.0: hub_resume [ 0.664380] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x21203 [ 0.664385] xhci_hcd 0000:03:00.0: Get port status returned 0x10203 [ 0.664412] hub 4-0:1.0: port 1: status 0203 change 0001 [ 0.664425] xhci_hcd 0000:03:00.0: clear port connect change, actual port 0 status = 0x1203 [ 0.664443] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 0.664447] xhci_hcd 0000:03:00.0: Get port status returned 0x2a0 [ 0.716384] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.716493] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.772239] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 0.772530] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.772543] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.816255] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.817521] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.817597] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.819046] ata1.00: configured for UDMA/133 [ 0.819557] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.820226] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.820250] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.820380] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.820918] sd 0:0:0:0: [sda] Write Protect is off [ 0.820989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.821205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.828228] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.839201] sda: sda1 sda2 sda3 [ 0.840465] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.884450] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.884464] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.960896] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.960907] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.961521] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.961891] usb 1-1: usb_probe_device [ 0.961899] usb 1-1: configuration #1 chosen from 1 choice [ 0.962137] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.962219] hub 1-1:1.0: usb_probe_interface [ 0.962225] hub 1-1:1.0: usb_probe_interface - got id [ 0.962231] hub 1-1:1.0: USB hub found [ 0.962490] hub 1-1:1.0: 6 ports detected [ 0.962555] hub 1-1:1.0: standalone hub [ 0.962559] hub 1-1:1.0: individual port power switching [ 0.962563] hub 1-1:1.0: individual port over-current protection [ 0.962566] hub 1-1:1.0: Single TT [ 0.962569] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.962572] hub 1-1:1.0: power on to power good time: 100ms [ 0.962809] hub 1-1:1.0: local power source is good [ 0.963265] hub 1-1:1.0: enabling power on all ports [ 0.964450] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.964535] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 1.020351] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.020364] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.064549] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.065295] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.076089] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.132274] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.132289] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.140023] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.140690] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.140769] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.141515] ata2.00: configured for UDMA/133 [ 1.142049] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.142590] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.142640] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.142960] sd 1:0:0:0: [sdb] Write Protect is off [ 1.143030] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.143088] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.144487] sdb: sdb1 sdb2 [ 1.145662] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.164023] usb 1-1: link qh256-0001/ffff8800379d96c0 start 1 [1/0 us] [ 1.208720] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.208731] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.208801] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.209189] usb 2-1: usb_probe_device [ 1.209197] usb 2-1: configuration #1 chosen from 1 choice [ 1.209460] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.209537] hub 2-1:1.0: usb_probe_interface [ 1.209541] hub 2-1:1.0: usb_probe_interface - got id [ 1.209548] hub 2-1:1.0: USB hub found [ 1.209825] hub 2-1:1.0: 6 ports detected [ 1.209891] hub 2-1:1.0: standalone hub [ 1.209895] hub 2-1:1.0: individual port power switching [ 1.209898] hub 2-1:1.0: individual port over-current protection [ 1.209901] hub 2-1:1.0: Single TT [ 1.209905] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.209908] hub 2-1:1.0: power on to power good time: 100ms [ 1.210187] hub 2-1:1.0: local power source is good [ 1.210775] hub 2-1:1.0: enabling power on all ports [ 1.211667] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 1.211685] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x1203 [ 1.211689] xhci_hcd 0000:03:00.0: Get port status returned 0x203 [ 1.211709] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s [ 1.211722] xhci_hcd 0000:03:00.0: // Ding dong! [ 1.211924] xhci_hcd 0000:03:00.0: Slot 1 output ctx = 0x37a31000 (dma) [ 1.211938] xhci_hcd 0000:03:00.0: Slot 1 input ctx = 0x37a32000 (dma) [ 1.211959] xhci_hcd 0000:03:00.0: Set slot id 1 dcbaa entry ffff88003797e008 to 0x37a31000 [ 1.211974] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x1203 [ 1.211977] xhci_hcd 0000:03:00.0: Get port status returned 0x203 [ 1.211999] xhci_hcd 0000:03:00.0: set port reset, actual port 0 status = 0x1211 [ 1.212009] xhci_hcd 0000:03:00.0: Port Status Change Event for port 1 [ 1.212016] xhci_hcd 0000:03:00.0: handle_port_status: starting port polling. [ 1.267944] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x201203 [ 1.267953] xhci_hcd 0000:03:00.0: Get port status returned 0x100203 [ 1.309138] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.323881] xhci_hcd 0000:03:00.0: clear port reset change, actual port 0 status = 0x1203 [ 1.323916] xhci_hcd 0000:03:00.0: clear port warm(BH) reset change, actual port 0 status = 0x1203 [ 1.323936] xhci_hcd 0000:03:00.0: clear port link state change, actual port 0 status = 0x1203 [ 1.323954] xhci_hcd 0000:03:00.0: clear port connect change, actual port 0 status = 0x1203 [ 1.323974] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x1203 [ 1.323978] xhci_hcd 0000:03:00.0: Get port status returned 0x203 [ 1.323993] xhci_hcd 0000:03:00.0: Set root hub portnum to 1 [ 1.323996] xhci_hcd 0000:03:00.0: Set fake root hub portnum to 1 [ 1.324000] xhci_hcd 0000:03:00.0: udev->tt = (null) [ 1.324004] xhci_hcd 0000:03:00.0: udev->ttport = 0x0 [ 1.324008] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 1.324014] xhci_hcd 0000:03:00.0: @ffff880037a32000 (virt) @37a32000 (dma) 0x000000 - drop flags [ 1.324018] xhci_hcd 0000:03:00.0: @ffff880037a32004 (virt) @37a32004 (dma) 0x000003 - add flags [ 1.324023] xhci_hcd 0000:03:00.0: @ffff880037a32008 (virt) @37a32008 (dma) 0x000000 - rsvd2[0] [ 1.324027] xhci_hcd 0000:03:00.0: @ffff880037a3200c (virt) @37a3200c (dma) 0x000000 - rsvd2[1] [ 1.324031] xhci_hcd 0000:03:00.0: @ffff880037a32010 (virt) @37a32010 (dma) 0x000000 - rsvd2[2] [ 1.324035] xhci_hcd 0000:03:00.0: @ffff880037a32014 (virt) @37a32014 (dma) 0x000000 - rsvd2[3] [ 1.324039] xhci_hcd 0000:03:00.0: @ffff880037a32018 (virt) @37a32018 (dma) 0x000000 - rsvd2[4] [ 1.324043] xhci_hcd 0000:03:00.0: @ffff880037a3201c (virt) @37a3201c (dma) 0x000000 - rsvd2[5] [ 1.324047] xhci_hcd 0000:03:00.0: Slot Context: [ 1.324051] xhci_hcd 0000:03:00.0: @ffff880037a32020 (virt) @37a32020 (dma) 0x8400000 - dev_info [ 1.324055] xhci_hcd 0000:03:00.0: @ffff880037a32024 (virt) @37a32024 (dma) 0x010000 - dev_info2 [ 1.324059] xhci_hcd 0000:03:00.0: @ffff880037a32028 (virt) @37a32028 (dma) 0x000000 - tt_info [ 1.324063] xhci_hcd 0000:03:00.0: @ffff880037a3202c (virt) @37a3202c (dma) 0x000000 - dev_state [ 1.324067] xhci_hcd 0000:03:00.0: @ffff880037a32030 (virt) @37a32030 (dma) 0x000000 - rsvd[0] [ 1.324071] xhci_hcd 0000:03:00.0: @ffff880037a32034 (virt) @37a32034 (dma) 0x000000 - rsvd[1] [ 1.324075] xhci_hcd 0000:03:00.0: @ffff880037a32038 (virt) @37a32038 (dma) 0x000000 - rsvd[2] [ 1.324079] xhci_hcd 0000:03:00.0: @ffff880037a3203c (virt) @37a3203c (dma) 0x000000 - rsvd[3] [ 1.324084] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.324088] xhci_hcd 0000:03:00.0: @ffff880037a32040 (virt) @37a32040 (dma) 0x000000 - ep_info [ 1.324092] xhci_hcd 0000:03:00.0: @ffff880037a32044 (virt) @37a32044 (dma) 0x2000026 - ep_info2 [ 1.324096] xhci_hcd 0000:03:00.0: @ffff880037a32048 (virt) @37a32048 (dma) 0x3797f801 - deq [ 1.324100] xhci_hcd 0000:03:00.0: @ffff880037a32050 (virt) @37a32050 (dma) 0x000000 - tx_info [ 1.324105] xhci_hcd 0000:03:00.0: @ffff880037a32054 (virt) @37a32054 (dma) 0x000000 - rsvd[0] [ 1.324109] xhci_hcd 0000:03:00.0: @ffff880037a32058 (virt) @37a32058 (dma) 0x000000 - rsvd[1] [ 1.324113] xhci_hcd 0000:03:00.0: @ffff880037a3205c (virt) @37a3205c (dma) 0x000000 - rsvd[2] [ 1.324117] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.324121] xhci_hcd 0000:03:00.0: @ffff880037a32060 (virt) @37a32060 (dma) 0x000000 - ep_info [ 1.324125] xhci_hcd 0000:03:00.0: @ffff880037a32064 (virt) @37a32064 (dma) 0x000000 - ep_info2 [ 1.324129] xhci_hcd 0000:03:00.0: @ffff880037a32068 (virt) @37a32068 (dma) 0x000000 - deq [ 1.324133] xhci_hcd 0000:03:00.0: @ffff880037a32070 (virt) @37a32070 (dma) 0x000000 - tx_info [ 1.324137] xhci_hcd 0000:03:00.0: @ffff880037a32074 (virt) @37a32074 (dma) 0x000000 - rsvd[0] [ 1.324141] xhci_hcd 0000:03:00.0: @ffff880037a32078 (virt) @37a32078 (dma) 0x000000 - rsvd[1] [ 1.324145] xhci_hcd 0000:03:00.0: @ffff880037a3207c (virt) @37a3207c (dma) 0x000000 - rsvd[2] [ 1.324149] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.324153] xhci_hcd 0000:03:00.0: @ffff880037a32080 (virt) @37a32080 (dma) 0x000000 - ep_info [ 1.324157] xhci_hcd 0000:03:00.0: @ffff880037a32084 (virt) @37a32084 (dma) 0x000000 - ep_info2 [ 1.324161] xhci_hcd 0000:03:00.0: @ffff880037a32088 (virt) @37a32088 (dma) 0x000000 - deq [ 1.324165] xhci_hcd 0000:03:00.0: @ffff880037a32090 (virt) @37a32090 (dma) 0x000000 - tx_info [ 1.324169] xhci_hcd 0000:03:00.0: @ffff880037a32094 (virt) @37a32094 (dma) 0x000000 - rsvd[0] [ 1.324173] xhci_hcd 0000:03:00.0: @ffff880037a32098 (virt) @37a32098 (dma) 0x000000 - rsvd[1] [ 1.324177] xhci_hcd 0000:03:00.0: @ffff880037a3209c (virt) @37a3209c (dma) 0x000000 - rsvd[2] [ 1.324182] xhci_hcd 0000:03:00.0: // Ding dong! [ 1.327733] xhci_hcd 0000:03:00.0: Successful Address Device command [ 1.327749] xhci_hcd 0000:03:00.0: Op regs DCBAA ptr = 0x0000003797e000 [ 1.327756] xhci_hcd 0000:03:00.0: Slot ID 1 dcbaa entry @ffff88003797e008 = 0x00000037a31000 [ 1.327760] xhci_hcd 0000:03:00.0: Output Context DMA address = 0x37a31000 [ 1.327792] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context: [ 1.327798] xhci_hcd 0000:03:00.0: @ffff880037a32000 (virt) @37a32000 (dma) 0x000000 - drop flags [ 1.327802] xhci_hcd 0000:03:00.0: @ffff880037a32004 (virt) @37a32004 (dma) 0x000003 - add flags [ 1.327807] xhci_hcd 0000:03:00.0: @ffff880037a32008 (virt) @37a32008 (dma) 0x000000 - rsvd2[0] [ 1.327811] xhci_hcd 0000:03:00.0: @ffff880037a3200c (virt) @37a3200c (dma) 0x000000 - rsvd2[1] [ 1.327815] xhci_hcd 0000:03:00.0: @ffff880037a32010 (virt) @37a32010 (dma) 0x000000 - rsvd2[2] [ 1.327819] xhci_hcd 0000:03:00.0: @ffff880037a32014 (virt) @37a32014 (dma) 0x000000 - rsvd2[3] [ 1.327824] xhci_hcd 0000:03:00.0: @ffff880037a32018 (virt) @37a32018 (dma) 0x000000 - rsvd2[4] [ 1.327828] xhci_hcd 0000:03:00.0: @ffff880037a3201c (virt) @37a3201c (dma) 0x000000 - rsvd2[5] [ 1.327831] xhci_hcd 0000:03:00.0: Slot Context: [ 1.327836] xhci_hcd 0000:03:00.0: @ffff880037a32020 (virt) @37a32020 (dma) 0x8400000 - dev_info [ 1.327840] xhci_hcd 0000:03:00.0: @ffff880037a32024 (virt) @37a32024 (dma) 0x010000 - dev_info2 [ 1.327844] xhci_hcd 0000:03:00.0: @ffff880037a32028 (virt) @37a32028 (dma) 0x000000 - tt_info [ 1.327848] xhci_hcd 0000:03:00.0: @ffff880037a3202c (virt) @37a3202c (dma) 0x000000 - dev_state [ 1.327852] xhci_hcd 0000:03:00.0: @ffff880037a32030 (virt) @37a32030 (dma) 0x000000 - rsvd[0] [ 1.327856] xhci_hcd 0000:03:00.0: @ffff880037a32034 (virt) @37a32034 (dma) 0x000000 - rsvd[1] [ 1.327860] xhci_hcd 0000:03:00.0: @ffff880037a32038 (virt) @37a32038 (dma) 0x000000 - rsvd[2] [ 1.327864] xhci_hcd 0000:03:00.0: @ffff880037a3203c (virt) @37a3203c (dma) 0x000000 - rsvd[3] [ 1.327869] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.327873] xhci_hcd 0000:03:00.0: @ffff880037a32040 (virt) @37a32040 (dma) 0x000000 - ep_info [ 1.327878] xhci_hcd 0000:03:00.0: @ffff880037a32044 (virt) @37a32044 (dma) 0x2000026 - ep_info2 [ 1.327882] xhci_hcd 0000:03:00.0: @ffff880037a32048 (virt) @37a32048 (dma) 0x3797f801 - deq [ 1.327886] xhci_hcd 0000:03:00.0: @ffff880037a32050 (virt) @37a32050 (dma) 0x000000 - tx_info [ 1.327890] xhci_hcd 0000:03:00.0: @ffff880037a32054 (virt) @37a32054 (dma) 0x000000 - rsvd[0] [ 1.327894] xhci_hcd 0000:03:00.0: @ffff880037a32058 (virt) @37a32058 (dma) 0x000000 - rsvd[1] [ 1.327898] xhci_hcd 0000:03:00.0: @ffff880037a3205c (virt) @37a3205c (dma) 0x000000 - rsvd[2] [ 1.327902] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.327906] xhci_hcd 0000:03:00.0: @ffff880037a32060 (virt) @37a32060 (dma) 0x000000 - ep_info [ 1.327910] xhci_hcd 0000:03:00.0: @ffff880037a32064 (virt) @37a32064 (dma) 0x000000 - ep_info2 [ 1.327914] xhci_hcd 0000:03:00.0: @ffff880037a32068 (virt) @37a32068 (dma) 0x000000 - deq [ 1.327918] xhci_hcd 0000:03:00.0: @ffff880037a32070 (virt) @37a32070 (dma) 0x000000 - tx_info [ 1.327922] xhci_hcd 0000:03:00.0: @ffff880037a32074 (virt) @37a32074 (dma) 0x000000 - rsvd[0] [ 1.327927] xhci_hcd 0000:03:00.0: @ffff880037a32078 (virt) @37a32078 (dma) 0x000000 - rsvd[1] [ 1.327931] xhci_hcd 0000:03:00.0: @ffff880037a3207c (virt) @37a3207c (dma) 0x000000 - rsvd[2] [ 1.327935] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.327939] xhci_hcd 0000:03:00.0: @ffff880037a32080 (virt) @37a32080 (dma) 0x000000 - ep_info [ 1.327943] xhci_hcd 0000:03:00.0: @ffff880037a32084 (virt) @37a32084 (dma) 0x000000 - ep_info2 [ 1.327947] xhci_hcd 0000:03:00.0: @ffff880037a32088 (virt) @37a32088 (dma) 0x000000 - deq [ 1.327951] xhci_hcd 0000:03:00.0: @ffff880037a32090 (virt) @37a32090 (dma) 0x000000 - tx_info [ 1.327955] xhci_hcd 0000:03:00.0: @ffff880037a32094 (virt) @37a32094 (dma) 0x000000 - rsvd[0] [ 1.327959] xhci_hcd 0000:03:00.0: @ffff880037a32098 (virt) @37a32098 (dma) 0x000000 - rsvd[1] [ 1.327963] xhci_hcd 0000:03:00.0: @ffff880037a3209c (virt) @37a3209c (dma) 0x000000 - rsvd[2] [ 1.327967] xhci_hcd 0000:03:00.0: Slot ID 1 Output Context: [ 1.327970] xhci_hcd 0000:03:00.0: Slot Context: [ 1.327974] xhci_hcd 0000:03:00.0: @ffff880037a31000 (virt) @37a31000 (dma) 0x8400000 - dev_info [ 1.327978] xhci_hcd 0000:03:00.0: @ffff880037a31004 (virt) @37a31004 (dma) 0x010000 - dev_info2 [ 1.327982] xhci_hcd 0000:03:00.0: @ffff880037a31008 (virt) @37a31008 (dma) 0x000000 - tt_info [ 1.327986] xhci_hcd 0000:03:00.0: @ffff880037a3100c (virt) @37a3100c (dma) 0x10000001 - dev_state [ 1.327990] xhci_hcd 0000:03:00.0: @ffff880037a31010 (virt) @37a31010 (dma) 0x000000 - rsvd[0] [ 1.327994] xhci_hcd 0000:03:00.0: @ffff880037a31014 (virt) @37a31014 (dma) 0x000000 - rsvd[1] [ 1.327998] xhci_hcd 0000:03:00.0: @ffff880037a31018 (virt) @37a31018 (dma) 0x000000 - rsvd[2] [ 1.328002] xhci_hcd 0000:03:00.0: @ffff880037a3101c (virt) @37a3101c (dma) 0x000000 - rsvd[3] [ 1.328006] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.328010] xhci_hcd 0000:03:00.0: @ffff880037a31020 (virt) @37a31020 (dma) 0x000001 - ep_info [ 1.328014] xhci_hcd 0000:03:00.0: @ffff880037a31024 (virt) @37a31024 (dma) 0x2000026 - ep_info2 [ 1.328018] xhci_hcd 0000:03:00.0: @ffff880037a31028 (virt) @37a31028 (dma) 0x3797f801 - deq [ 1.328022] xhci_hcd 0000:03:00.0: @ffff880037a31030 (virt) @37a31030 (dma) 0x000000 - tx_info [ 1.328026] xhci_hcd 0000:03:00.0: @ffff880037a31034 (virt) @37a31034 (dma) 0x008004 - rsvd[0] [ 1.328030] xhci_hcd 0000:03:00.0: @ffff880037a31038 (virt) @37a31038 (dma) 0x030000 - rsvd[1] [ 1.328034] xhci_hcd 0000:03:00.0: @ffff880037a3103c (virt) @37a3103c (dma) 0x000008 - rsvd[2] [ 1.328038] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.328042] xhci_hcd 0000:03:00.0: @ffff880037a31040 (virt) @37a31040 (dma) 0x000000 - ep_info [ 1.328046] xhci_hcd 0000:03:00.0: @ffff880037a31044 (virt) @37a31044 (dma) 0x000000 - ep_info2 [ 1.328050] xhci_hcd 0000:03:00.0: @ffff880037a31048 (virt) @37a31048 (dma) 0x000000 - deq [ 1.328053] xhci_hcd 0000:03:00.0: @ffff880037a31050 (virt) @37a31050 (dma) 0x000000 - tx_info [ 1.328057] xhci_hcd 0000:03:00.0: @ffff880037a31054 (virt) @37a31054 (dma) 0x000000 - rsvd[0] [ 1.328062] xhci_hcd 0000:03:00.0: @ffff880037a31058 (virt) @37a31058 (dma) 0x000000 - rsvd[1] [ 1.328065] xhci_hcd 0000:03:00.0: @ffff880037a3105c (virt) @37a3105c (dma) 0x000000 - rsvd[2] [ 1.328069] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.328073] xhci_hcd 0000:03:00.0: @ffff880037a31060 (virt) @37a31060 (dma) 0x000000 - ep_info [ 1.328077] xhci_hcd 0000:03:00.0: @ffff880037a31064 (virt) @37a31064 (dma) 0x000000 - ep_info2 [ 1.328081] xhci_hcd 0000:03:00.0: @ffff880037a31068 (virt) @37a31068 (dma) 0x000000 - deq [ 1.328085] xhci_hcd 0000:03:00.0: @ffff880037a31070 (virt) @37a31070 (dma) 0x000000 - tx_info [ 1.328089] xhci_hcd 0000:03:00.0: @ffff880037a31074 (virt) @37a31074 (dma) 0x000000 - rsvd[0] [ 1.328093] xhci_hcd 0000:03:00.0: @ffff880037a31078 (virt) @37a31078 (dma) 0x000000 - rsvd[1] [ 1.328097] xhci_hcd 0000:03:00.0: @ffff880037a3107c (virt) @37a3107c (dma) 0x000000 - rsvd[2] [ 1.328101] xhci_hcd 0000:03:00.0: Internal device address = 2 [ 1.328109] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd [ 1.344435] usb 4-1: Parent hub missing LPM exit latency info. Power management will be impacted. [ 1.344892] usb 4-1: skipped 1 descriptor after endpoint [ 1.344901] usb 4-1: skipped 1 descriptor after endpoint [ 1.344955] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.344980] usb 4-1: default language 0x0409 [ 1.345083] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.345228] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.345368] xhci_hcd 0000:03:00.0: Waiting for status stage event [ 1.345427] usb 4-1: udev 2, busnum 4, minor = 385 [ 1.345434] usb 4-1: New USB device found, idVendor=174c, idProduct=55aa [ 1.345509] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 1.345582] usb 4-1: Product: MEDION HDDrive-n-GO [ 1.345648] usb 4-1: Manufacturer: MEDION [ 1.345712] usb 4-1: SerialNumber: 3180000000000000092C [ 1.346151] usb 4-1: usb_probe_device [ 1.346160] usb 4-1: configuration #1 chosen from 1 choice [ 1.346189] xhci_hcd 0000:03:00.0: add ep 0x81, slot id 1, new drop flags = 0x0, new add flags = 0x8, new slot info = 0x18400000 [ 1.346209] xhci_hcd 0000:03:00.0: add ep 0x2, slot id 1, new drop flags = 0x0, new add flags = 0x18, new slot info = 0x20400000 [ 1.346214] xhci_hcd 0000:03:00.0: xhci_check_bandwidth called for udev ffff880118515000 [ 1.346218] xhci_hcd 0000:03:00.0: New Input Control Context: [ 1.346224] xhci_hcd 0000:03:00.0: @ffff880037a32000 (virt) @37a32000 (dma) 0x000000 - drop flags [ 1.346228] xhci_hcd 0000:03:00.0: @ffff880037a32004 (virt) @37a32004 (dma) 0x000019 - add flags [ 1.346233] xhci_hcd 0000:03:00.0: @ffff880037a32008 (virt) @37a32008 (dma) 0x000000 - rsvd2[0] [ 1.346237] xhci_hcd 0000:03:00.0: @ffff880037a3200c (virt) @37a3200c (dma) 0x000000 - rsvd2[1] [ 1.346241] xhci_hcd 0000:03:00.0: @ffff880037a32010 (virt) @37a32010 (dma) 0x000000 - rsvd2[2] [ 1.346245] xhci_hcd 0000:03:00.0: @ffff880037a32014 (virt) @37a32014 (dma) 0x000000 - rsvd2[3] [ 1.346249] xhci_hcd 0000:03:00.0: @ffff880037a32018 (virt) @37a32018 (dma) 0x000000 - rsvd2[4] [ 1.346253] xhci_hcd 0000:03:00.0: @ffff880037a3201c (virt) @37a3201c (dma) 0x000000 - rsvd2[5] [ 1.346257] xhci_hcd 0000:03:00.0: Slot Context: [ 1.346261] xhci_hcd 0000:03:00.0: @ffff880037a32020 (virt) @37a32020 (dma) 0x20400000 - dev_info [ 1.346265] xhci_hcd 0000:03:00.0: @ffff880037a32024 (virt) @37a32024 (dma) 0x010000 - dev_info2 [ 1.346269] xhci_hcd 0000:03:00.0: @ffff880037a32028 (virt) @37a32028 (dma) 0x000000 - tt_info [ 1.346273] xhci_hcd 0000:03:00.0: @ffff880037a3202c (virt) @37a3202c (dma) 0x000000 - dev_state [ 1.346277] xhci_hcd 0000:03:00.0: @ffff880037a32030 (virt) @37a32030 (dma) 0x000000 - rsvd[0] [ 1.346282] xhci_hcd 0000:03:00.0: @ffff880037a32034 (virt) @37a32034 (dma) 0x000000 - rsvd[1] [ 1.346286] xhci_hcd 0000:03:00.0: @ffff880037a32038 (virt) @37a32038 (dma) 0x000000 - rsvd[2] [ 1.346290] xhci_hcd 0000:03:00.0: @ffff880037a3203c (virt) @37a3203c (dma) 0x000000 - rsvd[3] [ 1.346294] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.346298] xhci_hcd 0000:03:00.0: @ffff880037a32040 (virt) @37a32040 (dma) 0x000000 - ep_info [ 1.346302] xhci_hcd 0000:03:00.0: @ffff880037a32044 (virt) @37a32044 (dma) 0x2000026 - ep_info2 [ 1.346306] xhci_hcd 0000:03:00.0: @ffff880037a32048 (virt) @37a32048 (dma) 0x3797f801 - deq [ 1.346311] xhci_hcd 0000:03:00.0: @ffff880037a32050 (virt) @37a32050 (dma) 0x000000 - tx_info [ 1.346315] xhci_hcd 0000:03:00.0: @ffff880037a32054 (virt) @37a32054 (dma) 0x000000 - rsvd[0] [ 1.346319] xhci_hcd 0000:03:00.0: @ffff880037a32058 (virt) @37a32058 (dma) 0x000000 - rsvd[1] [ 1.346323] xhci_hcd 0000:03:00.0: @ffff880037a3205c (virt) @37a3205c (dma) 0x000000 - rsvd[2] [ 1.346327] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.346331] xhci_hcd 0000:03:00.0: @ffff880037a32060 (virt) @37a32060 (dma) 0x000000 - ep_info [ 1.346335] xhci_hcd 0000:03:00.0: @ffff880037a32064 (virt) @37a32064 (dma) 0x000000 - ep_info2 [ 1.346339] xhci_hcd 0000:03:00.0: @ffff880037a32068 (virt) @37a32068 (dma) 0x000000 - deq [ 1.346343] xhci_hcd 0000:03:00.0: @ffff880037a32070 (virt) @37a32070 (dma) 0x000000 - tx_info [ 1.346347] xhci_hcd 0000:03:00.0: @ffff880037a32074 (virt) @37a32074 (dma) 0x000000 - rsvd[0] [ 1.346351] xhci_hcd 0000:03:00.0: @ffff880037a32078 (virt) @37a32078 (dma) 0x000000 - rsvd[1] [ 1.346355] xhci_hcd 0000:03:00.0: @ffff880037a3207c (virt) @37a3207c (dma) 0x000000 - rsvd[2] [ 1.346359] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.346363] xhci_hcd 0000:03:00.0: @ffff880037a32080 (virt) @37a32080 (dma) 0x000000 - ep_info [ 1.346367] xhci_hcd 0000:03:00.0: @ffff880037a32084 (virt) @37a32084 (dma) 0x4000f36 - ep_info2 [ 1.346371] xhci_hcd 0000:03:00.0: @ffff880037a32088 (virt) @37a32088 (dma) 0x37a33401 - deq [ 1.346374] xhci_hcd 0000:03:00.0: @ffff880037a32090 (virt) @37a32090 (dma) 0x000000 - tx_info [ 1.346378] xhci_hcd 0000:03:00.0: @ffff880037a32094 (virt) @37a32094 (dma) 0x000000 - rsvd[0] [ 1.346383] xhci_hcd 0000:03:00.0: @ffff880037a32098 (virt) @37a32098 (dma) 0x000000 - rsvd[1] [ 1.346387] xhci_hcd 0000:03:00.0: @ffff880037a3209c (virt) @37a3209c (dma) 0x000000 - rsvd[2] [ 1.346390] xhci_hcd 0000:03:00.0: OUT Endpoint 02 Context (ep_index 03): [ 1.346394] xhci_hcd 0000:03:00.0: @ffff880037a320a0 (virt) @37a320a0 (dma) 0x000000 - ep_info [ 1.346398] xhci_hcd 0000:03:00.0: @ffff880037a320a4 (virt) @37a320a4 (dma) 0x4000f16 - ep_info2 [ 1.346402] xhci_hcd 0000:03:00.0: @ffff880037a320a8 (virt) @37a320a8 (dma) 0x37a36001 - deq [ 1.346406] xhci_hcd 0000:03:00.0: @ffff880037a320b0 (virt) @37a320b0 (dma) 0x000000 - tx_info [ 1.346410] xhci_hcd 0000:03:00.0: @ffff880037a320b4 (virt) @37a320b4 (dma) 0x000000 - rsvd[0] [ 1.346414] xhci_hcd 0000:03:00.0: @ffff880037a320b8 (virt) @37a320b8 (dma) 0x000000 - rsvd[1] [ 1.346418] xhci_hcd 0000:03:00.0: @ffff880037a320bc (virt) @37a320bc (dma) 0x000000 - rsvd[2] [ 1.346423] xhci_hcd 0000:03:00.0: // Ding dong! [ 1.347490] xhci_hcd 0000:03:00.0: Completed config ep cmd [ 1.347544] xhci_hcd 0000:03:00.0: Successful Endpoint Configure command [ 1.347550] xhci_hcd 0000:03:00.0: Output context after successful config ep cmd: [ 1.347555] xhci_hcd 0000:03:00.0: Slot Context: [ 1.347561] xhci_hcd 0000:03:00.0: @ffff880037a31000 (virt) @37a31000 (dma) 0x20400000 - dev_info [ 1.347566] xhci_hcd 0000:03:00.0: @ffff880037a31004 (virt) @37a31004 (dma) 0x010000 - dev_info2 [ 1.347570] xhci_hcd 0000:03:00.0: @ffff880037a31008 (virt) @37a31008 (dma) 0x000000 - tt_info [ 1.347575] xhci_hcd 0000:03:00.0: @ffff880037a3100c (virt) @37a3100c (dma) 0x18000001 - dev_state [ 1.347579] xhci_hcd 0000:03:00.0: @ffff880037a31010 (virt) @37a31010 (dma) 0x000000 - rsvd[0] [ 1.347584] xhci_hcd 0000:03:00.0: @ffff880037a31014 (virt) @37a31014 (dma) 0x000000 - rsvd[1] [ 1.347588] xhci_hcd 0000:03:00.0: @ffff880037a31018 (virt) @37a31018 (dma) 0x000000 - rsvd[2] [ 1.347592] xhci_hcd 0000:03:00.0: @ffff880037a3101c (virt) @37a3101c (dma) 0x000000 - rsvd[3] [ 1.347596] xhci_hcd 0000:03:00.0: IN Endpoint 00 Context (ep_index 00): [ 1.347601] xhci_hcd 0000:03:00.0: @ffff880037a31020 (virt) @37a31020 (dma) 0x000001 - ep_info [ 1.347605] xhci_hcd 0000:03:00.0: @ffff880037a31024 (virt) @37a31024 (dma) 0x2000026 - ep_info2 [ 1.347609] xhci_hcd 0000:03:00.0: @ffff880037a31028 (virt) @37a31028 (dma) 0x3797f9e1 - deq [ 1.347613] xhci_hcd 0000:03:00.0: @ffff880037a31030 (virt) @37a31030 (dma) 0x000000 - tx_info [ 1.347617] xhci_hcd 0000:03:00.0: @ffff880037a31034 (virt) @37a31034 (dma) 0x008004 - rsvd[0] [ 1.347622] xhci_hcd 0000:03:00.0: @ffff880037a31038 (virt) @37a31038 (dma) 0x030000 - rsvd[1] [ 1.347626] xhci_hcd 0000:03:00.0: @ffff880037a3103c (virt) @37a3103c (dma) 0x000000 - rsvd[2] [ 1.347630] xhci_hcd 0000:03:00.0: OUT Endpoint 01 Context (ep_index 01): [ 1.347634] xhci_hcd 0000:03:00.0: @ffff880037a31040 (virt) @37a31040 (dma) 0x000000 - ep_info [ 1.347638] xhci_hcd 0000:03:00.0: @ffff880037a31044 (virt) @37a31044 (dma) 0x000000 - ep_info2 [ 1.347642] xhci_hcd 0000:03:00.0: @ffff880037a31048 (virt) @37a31048 (dma) 0x000000 - deq [ 1.347646] xhci_hcd 0000:03:00.0: @ffff880037a31050 (virt) @37a31050 (dma) 0x000000 - tx_info [ 1.347650] xhci_hcd 0000:03:00.0: @ffff880037a31054 (virt) @37a31054 (dma) 0x000000 - rsvd[0] [ 1.347654] xhci_hcd 0000:03:00.0: @ffff880037a31058 (virt) @37a31058 (dma) 0x000000 - rsvd[1] [ 1.347658] xhci_hcd 0000:03:00.0: @ffff880037a3105c (virt) @37a3105c (dma) 0x000000 - rsvd[2] [ 1.347662] xhci_hcd 0000:03:00.0: IN Endpoint 01 Context (ep_index 02): [ 1.347666] xhci_hcd 0000:03:00.0: @ffff880037a31060 (virt) @37a31060 (dma) 0x000001 - ep_info [ 1.347670] xhci_hcd 0000:03:00.0: @ffff880037a31064 (virt) @37a31064 (dma) 0x4000f36 - ep_info2 [ 1.347674] xhci_hcd 0000:03:00.0: @ffff880037a31068 (virt) @37a31068 (dma) 0x37a33401 - deq [ 1.347678] xhci_hcd 0000:03:00.0: @ffff880037a31070 (virt) @37a31070 (dma) 0x000000 - tx_info [ 1.347682] xhci_hcd 0000:03:00.0: @ffff880037a31074 (virt) @37a31074 (dma) 0x000002 - rsvd[0] [ 1.347686] xhci_hcd 0000:03:00.0: @ffff880037a31078 (virt) @37a31078 (dma) 0x030000 - rsvd[1] [ 1.347690] xhci_hcd 0000:03:00.0: @ffff880037a3107c (virt) @37a3107c (dma) 0x000000 - rsvd[2] [ 1.347694] xhci_hcd 0000:03:00.0: OUT Endpoint 02 Context (ep_index 03): [ 1.347698] xhci_hcd 0000:03:00.0: @ffff880037a31080 (virt) @37a31080 (dma) 0x000001 - ep_info [ 1.347702] xhci_hcd 0000:03:00.0: @ffff880037a31084 (virt) @37a31084 (dma) 0x4000f16 - ep_info2 [ 1.347706] xhci_hcd 0000:03:00.0: @ffff880037a31088 (virt) @37a31088 (dma) 0x37a36001 - deq [ 1.347710] xhci_hcd 0000:03:00.0: @ffff880037a31090 (virt) @37a31090 (dma) 0x000000 - tx_info [ 1.347714] xhci_hcd 0000:03:00.0: @ffff880037a31094 (virt) @37a31094 (dma) 0x000000 - rsvd[0] [ 1.347718] xhci_hcd 0000:03:00.0: @ffff880037a31098 (virt) @37a31098 (dma) 0x030000 - rsvd[1] [ 1.347722] xhci_hcd 0000:03:00.0: @ffff880037a3109c (virt) @37a3109c (dma) 0x000000 - rsvd[2] [ 1.347731] xhci_hcd 0000:03:00.0: Endpoint 0x81 not halted, refusing to reset. [ 1.347736] xhci_hcd 0000:03:00.0: Endpoint 0x2 not halted, refusing to reset. [ 1.347874] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 1.348139] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.348344] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.395806] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 1.399827] tsc: Refined TSC clocksource calibration: 1596.373 MHz [ 1.407855] usb 2-1: link qh256-0001/ffff8800379d93c0 start 1 [1/0 us] [ 1.420054] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.459772] ata4: SATA link down (SStatus 0 SControl 300) [ 1.515001] usb 1-1.2: skipped 1 descriptor after interface [ 1.515475] usb 1-1.2: default language 0x0409 [ 1.518153] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.518165] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.518240] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.518328] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.518393] usb 1-1.2: Manufacturer: Logitech [ 1.518824] usb 1-1.2: usb_probe_device [ 1.518833] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.519521] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.519968] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.591934] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.779568] ata5: SATA link down (SStatus 0 SControl 300) [ 1.782327] Freeing unused kernel memory: 1328K (ffffffff81d09000 - ffffffff81e55000) [ 1.782417] Write protecting the kernel read-only data: 12288k [ 1.787532] Freeing unused kernel memory: 972K (ffff88000170d000 - ffff880001800000) [ 1.791948] Freeing unused kernel memory: 912K (ffff880001b1c000 - ffff880001c00000) [ 1.829437] usb 1-1.4: skipped 1 descriptor after configuration [ 1.829445] usb 1-1.4: skipped 5 descriptors after interface [ 1.829452] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.829457] usb 1-1.4: skipped 23 descriptors after interface [ 1.830253] udevd[121]: starting version 175 [ 1.831664] usb 1-1.4: default language 0x0409 [ 1.845167] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.845176] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.845232] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.845299] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.845346] usb 1-1.4: Manufacturer: 123 [ 1.845624] usb 1-1.4: usb_probe_device [ 1.845629] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.845775] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 2.017794] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 2.017940] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 2.018053] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 2.087591] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 2.184278] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.184289] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.184365] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.184819] usb 2-1.5: usb_probe_device [ 2.184829] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.185536] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.185753] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.185975] hub 2-1:1.0: state 7 ports 6 chg 0000 evt 0020 [ 2.399216] Switched to clocksource tsc [ 2.495708] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.495802] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2.496185] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 2.496656] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 2.496721] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.498903] hidraw: raw HID events driver (C) Jiri Kosina [ 2.500642] usb-storage 4-1:1.0: usb_probe_interface [ 2.500653] usb-storage 4-1:1.0: usb_probe_interface - got id [ 2.500658] usb-storage 4-1:1.0: USB Mass Storage device detected [ 2.500864] scsi6 : usb-storage 4-1:1.0 [ 2.503533] usbhid 1-1.2:1.0: usb_probe_interface [ 2.503538] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 2.506573] usbcore: registered new interface driver usbhid [ 2.506619] usbhid: USB HID core driver [ 2.506637] usbcore: registered new interface driver usb-storage [ 2.547213] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 2.547592] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 3.256958] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 3.502821] scsi 6:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 6 [ 3.503571] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.503795] sd 6:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 3.504014] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.504022] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b3e240, len = 68, expected = 192, status = -121 [ 3.504131] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.504142] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 3.504225] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.504230] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.504233] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.504236] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.504238] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.504242] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.504245] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 3.504248] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a33470 (DMA) [ 3.504251] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.504255] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a33470 (0x37a33470 dma), new cycle = 1 [ 3.504259] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.504267] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.504369] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.504443] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a33471 [ 3.504563] sd 6:0:0:0: [sdc] Write Protect is off [ 3.504622] sd 6:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 3.504733] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.504740] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d4027bc0, len = 68, expected = 192, status = -121 [ 3.504814] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.504818] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 3.504868] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.504872] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.504875] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.504878] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.504881] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.504884] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.504887] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 3.504890] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a334a0 (DMA) [ 3.504892] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.504897] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a334a0 (0x37a334a0 dma), new cycle = 1 [ 3.504900] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.504907] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.504972] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.505046] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a334a1 [ 3.505132] sd 6:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.505731] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.505736] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b3e540, len = 68, expected = 192, status = -121 [ 3.505808] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.505812] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 3.505861] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.505864] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.505867] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.505869] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.505872] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.505875] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.505878] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 3.505881] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a33500 (DMA) [ 3.505883] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.505887] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a33500 (0x37a33500 dma), new cycle = 1 [ 3.505890] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.505896] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.505961] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.506035] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a33501 [ 3.506205] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.506210] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d5030780, len = 68, expected = 192, status = -121 [ 3.506294] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.506298] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 3.506353] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.506356] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.506359] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.506362] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.506364] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.506367] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.506370] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 3.506373] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a33530 (DMA) [ 3.506375] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.506379] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a33530 (0x37a33530 dma), new cycle = 1 [ 3.506382] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.506388] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.506454] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.506528] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a33531 [ 3.507008] sdc: sdc1 sdc2 sdc3 [ 3.507925] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.507930] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d50303c0, len = 68, expected = 192, status = -121 [ 3.508002] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.508006] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 3.508054] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.508058] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.508060] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.508063] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.508066] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.508068] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.508071] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 3.508074] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a335e0 (DMA) [ 3.508076] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.508080] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a335e0 (0x37a335e0 dma), new cycle = 1 [ 3.508083] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.508090] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.508155] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.508229] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a335e1 [ 3.508398] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 192 bytes, 124 bytes untransferred [ 3.508402] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d5030300, len = 68, expected = 192, status = -121 [ 3.508475] xhci_hcd 0000:03:00.0: Stalled endpoint [ 3.508479] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 3.508529] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 3.508532] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 3.508535] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 3.508537] xhci_hcd 0000:03:00.0: Finding endpoint context [ 3.508540] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 3.508543] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 3.508545] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 3.508548] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a33610 (DMA) [ 3.508551] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 3.508554] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a33610 (0x37a33610 dma), new cycle = 1 [ 3.508557] xhci_hcd 0000:03:00.0: // Ding dong! [ 3.508564] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 3.508629] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 3.508703] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a33611 [ 3.508787] sd 6:0:0:0: [sdc] Attached SCSI disk [ 26.771583] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 26.796782] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 26.824541] udevd[602]: starting version 175 [ 27.008205] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130725/utaddress-251) [ 27.008218] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.008224] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 27.008229] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.008231] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 27.008236] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.008239] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130725/utaddress-251) [ 27.008243] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 27.008245] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 27.174963] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 96 bytes, 74 bytes untransferred [ 27.174970] xhci_hcd 0000:03:00.0: Giveback URB ffff880037b3e540, len = 22, expected = 96, status = -121 [ 27.175043] xhci_hcd 0000:03:00.0: Stalled endpoint [ 27.175049] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 27.175106] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 27.175110] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 27.175114] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 27.175117] xhci_hcd 0000:03:00.0: Finding endpoint context [ 27.175119] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 27.175122] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 27.175124] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 27.175127] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a33680 (DMA) [ 27.175129] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 27.175133] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a33680 (0x37a33680 dma), new cycle = 1 [ 27.175137] xhci_hcd 0000:03:00.0: // Ding dong! [ 27.175143] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 27.175211] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 27.175288] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a33681 [ 27.213133] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 254 bytes, 178 bytes untransferred [ 27.213142] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d4027980, len = 76, expected = 254, status = -121 [ 27.213212] xhci_hcd 0000:03:00.0: Stalled endpoint [ 27.213217] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 27.213263] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 27.213267] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 27.213270] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 27.213272] xhci_hcd 0000:03:00.0: Finding endpoint context [ 27.213275] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 27.213278] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 27.213280] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 27.213284] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a336c0 (DMA) [ 27.213286] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 27.213290] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a336c0 (0x37a336c0 dma), new cycle = 1 [ 27.213294] xhci_hcd 0000:03:00.0: // Ding dong! [ 27.213300] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 27.213369] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 27.213446] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a336c1 [ 27.213772] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 254 bytes, 230 bytes untransferred [ 27.213778] xhci_hcd 0000:03:00.0: Giveback URB ffff8800d4027980, len = 24, expected = 254, status = -121 [ 27.213850] xhci_hcd 0000:03:00.0: Stalled endpoint [ 27.213856] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 27.213902] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 27.213906] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 27.213909] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 27.213912] xhci_hcd 0000:03:00.0: Finding endpoint context [ 27.213915] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 27.213917] xhci_hcd 0000:03:00.0: Cycle state = 0x1 [ 27.213919] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b20 (virtual) [ 27.213922] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a33700 (DMA) [ 27.213925] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 27.213929] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b20 (0x37a33400 dma), new deq ptr = ffff880037a33700 (0x37a33700 dma), new cycle = 1 [ 27.213932] xhci_hcd 0000:03:00.0: // Ding dong! [ 27.213939] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 27.214007] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 27.214084] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a33701 [ 27.383685] lp: driver loaded but no devices found [ 27.401656] type=1400 audit(1377170351.333:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=703 comm="apparmor_parser" [ 27.401673] type=1400 audit(1377170351.333:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser" [ 27.401687] type=1400 audit(1377170351.333:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser" [ 27.402071] wmi: Mapper loaded [ 27.403032] type=1400 audit(1377170351.333:5): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=703 comm="apparmor_parser" [ 27.403050] type=1400 audit(1377170351.333:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser" [ 27.403222] samsung_laptop: detected SABI interface: SwSmi@ [ 27.403225] samsung_laptop: Backlight controlled by ACPI video driver [ 27.409171] type=1400 audit(1377170351.337:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=703 comm="apparmor_parser" [ 27.421487] cfg80211: Calling CRDA to update world regulatory domain [ 27.429453] cfg80211: World regulatory domain updated: [ 27.429458] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 27.429460] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.429462] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.429464] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 27.429465] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.429467] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 27.520646] Bluetooth: Core ver 2.16 [ 27.520702] NET: Registered protocol family 31 [ 27.520706] Bluetooth: HCI device and connection manager initialized [ 27.520723] Bluetooth: HCI socket layer initialized [ 27.520735] Bluetooth: L2CAP socket layer initialized [ 27.520761] Bluetooth: SCO socket layer initialized [ 27.578670] init: failsafe main process (925) killed by TERM signal [ 27.590515] [drm] Initialized drm 1.1.0 20060810 [ 27.593546] Linux video capture interface: v2.00 [ 27.696165] ppdev: user-space parallel port driver [ 27.738697] xhci_hcd 0000:03:00.0: ep 0x81 - asked for 96 bytes, 74 bytes untransferred [ 27.738703] xhci_hcd 0000:03:00.0: Giveback URB ffff8801184cc540, len = 22, expected = 96, status = -121 [ 27.738768] xhci_hcd 0000:03:00.0: Stalled endpoint [ 27.738771] xhci_hcd 0000:03:00.0: Giveback URB ffff88003785dc80, len = 0, expected = 13, status = -32 [ 27.738815] xhci_hcd 0000:03:00.0: Queueing reset endpoint command [ 27.738820] xhci_hcd 0000:03:00.0: Cleaning up stalled endpoint ring [ 27.738823] xhci_hcd 0000:03:00.0: Finding segment containing stopped TRB. [ 27.738825] xhci_hcd 0000:03:00.0: Finding endpoint context [ 27.738827] xhci_hcd 0000:03:00.0: Finding segment containing last TRB in TD. [ 27.738829] xhci_hcd 0000:03:00.0: Cycle state = 0x0 [ 27.738831] xhci_hcd 0000:03:00.0: New dequeue segment = ffff880037860b00 (virtual) [ 27.738833] xhci_hcd 0000:03:00.0: New dequeue pointer = 0x37a33b10 (DMA) [ 27.738835] xhci_hcd 0000:03:00.0: Queueing new dequeue state [ 27.738839] xhci_hcd 0000:03:00.0: Set TR Deq Ptr cmd, new deq seg = ffff880037860b00 (0x37a33800 dma), new deq ptr = ffff880037a33b10 (0x37a33b10 dma), new cycle = 0 [ 27.738841] xhci_hcd 0000:03:00.0: // Ding dong! [ 27.738847] xhci_hcd 0000:03:00.0: WARN halted endpoint, queueing URB anyway. [ 27.738915] xhci_hcd 0000:03:00.0: Ignoring reset ep completion code of 1 [ 27.738991] xhci_hcd 0000:03:00.0: Successful Set TR Deq Ptr cmd, deq = @37a33b10 [ 27.866927] type=1400 audit(1377170351.797:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1072 comm="apparmor_parser" [ 27.866941] type=1400 audit(1377170351.797:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1072 comm="apparmor_parser" [ 27.866950] type=1400 audit(1377170351.797:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1072 comm="apparmor_parser" [ 27.868113] type=1400 audit(1377170351.797:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1072 comm="apparmor_parser" [ 28.021465] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 28.021470] Bluetooth: BNEP filters: protocol multicast [ 28.021485] Bluetooth: BNEP socket layer initialized [ 28.206752] btusb 2-1.5:1.0: usb_probe_interface [ 28.206759] btusb 2-1.5:1.0: usb_probe_interface - got id [ 28.208216] usbcore: registered new interface driver btusb [ 28.208599] usb 2-1.5: link qh1-0e01/ffff8800c86b6240 start 0 [1/2 us] [ 28.209511] Bluetooth: RFCOMM TTY layer initialized [ 28.209542] Bluetooth: RFCOMM socket layer initialized [ 28.209544] Bluetooth: RFCOMM ver 1.11 [ 28.378345] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 28.393388] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 28.468420] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 28.517174] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 28.517179] Copyright(c) 2003-2013 Intel Corporation [ 28.517376] iwlwifi 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control [ 28.517543] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 28.725340] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 29.112967] uvcvideo 1-1.4:1.0: usb_probe_interface [ 29.112974] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 29.113030] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 29.132377] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 29.132518] usbcore: registered new interface driver uvcvideo [ 29.132521] USB Video Class driver (1.1.1) [ 29.135975] usb 1-1.4: link qh16-0001/ffff8800c86b62c0 start 2 [1/0 us] [ 29.136042] usb 1-1.4: unlink qh16-0001/ffff8800c86b62c0 start 2 [1/0 us] [ 29.178014] i915: module verification failed: signature and/or required key missing - tainting kernel [ 29.183298] [drm] Memory usable by graphics device = 2048M [ 29.183308] i915 0000:00:02.0: setting latency timer to 64 [ 29.217011] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 29.217027] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 29.217028] [drm] Driver supports precise vblank timestamp query. [ 29.217209] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 29.227839] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 29.227845] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 29.227848] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 29.227851] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 29.227953] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 29.232651] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 29.232655] [drm] This can cause pipe underruns and display issues. [ 29.232656] [drm] Please upgrade your BIOS to fix this. [ 29.250134] fbcon: inteldrmfb (fb0) is primary device [ 29.272221] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 29.288752] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 29.295429] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 29.568876] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 29.575507] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 29.653465] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.202218] Console: switching to colour frame buffer device 170x48 [ 30.204830] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 30.204832] i915 0000:00:02.0: registered panic notifier [ 30.222576] acpi device:33: registered as cooling_device9 [ 30.223061] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 30.223853] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 30.230580] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 30.231008] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 30.268015] init: alsa-restore main process (1181) terminated with status 19 [ 30.276248] usb 1-1.2: link qh8-0e01/ffff880075744cc0 start 3 [1/2 us] [ 30.291378] usb 1-1.2: unlink qh8-0e01/ffff880075744cc0 start 3 [1/2 us] [ 30.308740] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 30.311660] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 30.311936] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 30.779338] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 30.917318] ehci-pci 0000:00:1a.0: reused qh ffff880075744cc0 schedule [ 30.917326] usb 1-1.2: link qh8-0e01/ffff880075744cc0 start 3 [1/2 us] [ 31.790601] usb 1-1.4: usb auto-suspend, wakeup 0 [ 32.854611] usb usb3: usb auto-resume [ 32.854630] hub 3-0:1.0: hub_resume [ 32.854640] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.854642] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.854658] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.854660] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.854677] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.854686] hub 3-0:1.0: hub_suspend [ 32.854703] usb usb3: bus auto-suspend, wakeup 1 [ 32.854716] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.854754] usb usb3: usb auto-resume [ 32.865455] hub 3-0:1.0: hub_resume [ 32.865466] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.865469] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.865488] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.865491] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.865511] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.865526] hub 3-0:1.0: hub_suspend [ 32.865540] usb usb3: bus auto-suspend, wakeup 1 [ 32.865554] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.866116] usb 1-1.4: usb auto-resume [ 32.913588] usb 1-1.4: finish resume [ 32.920170] usb usb3: usb auto-resume [ 32.920190] hub 3-0:1.0: hub_resume [ 32.920199] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.920201] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.920218] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.920220] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.920242] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.920257] hub 3-0:1.0: hub_suspend [ 32.920272] usb usb3: bus auto-suspend, wakeup 1 [ 32.920287] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.920306] usb usb3: usb auto-resume [ 32.929418] hub 3-0:1.0: hub_resume [ 32.929436] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.929439] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.929452] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.929453] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.929469] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.929485] hub 3-0:1.0: hub_suspend [ 32.929500] usb usb3: bus auto-suspend, wakeup 1 [ 32.929514] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.930530] usb usb3: usb auto-resume [ 32.941399] hub 3-0:1.0: hub_resume [ 32.941412] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.941414] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.941429] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.941431] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.941448] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.941477] hub 3-0:1.0: hub_suspend [ 32.941492] usb usb3: bus auto-suspend, wakeup 1 [ 32.941507] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.941558] usb usb3: usb auto-resume [ 32.953386] hub 3-0:1.0: hub_resume [ 32.953397] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.953398] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.953413] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.953415] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.953429] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.953440] hub 3-0:1.0: hub_suspend [ 32.953457] usb usb3: bus auto-suspend, wakeup 1 [ 32.953472] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.960415] usb usb3: usb auto-resume [ 32.969391] hub 3-0:1.0: hub_resume [ 32.969406] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.969410] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.969432] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.969434] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.969450] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.969477] hub 3-0:1.0: hub_suspend [ 32.969492] usb usb3: bus auto-suspend, wakeup 1 [ 32.969506] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.969559] usb usb3: usb auto-resume [ 32.981434] hub 3-0:1.0: hub_resume [ 32.981446] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.981448] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.981461] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.981463] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.981477] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.981488] hub 3-0:1.0: hub_suspend [ 32.981506] usb usb3: bus auto-suspend, wakeup 1 [ 32.981522] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.995050] usb usb3: usb auto-resume [ 32.995071] hub 3-0:1.0: hub_resume [ 32.995080] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 32.995082] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.995099] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 32.995101] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 32.995116] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.995144] hub 3-0:1.0: hub_suspend [ 32.995160] usb usb3: bus auto-suspend, wakeup 1 [ 32.995175] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 32.995231] usb usb3: usb auto-resume [ 33.005375] hub 3-0:1.0: hub_resume [ 33.005391] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.005394] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.005412] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.005415] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.005435] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.005445] hub 3-0:1.0: hub_suspend [ 33.005464] usb usb3: bus auto-suspend, wakeup 1 [ 33.005478] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.007966] usb usb3: usb auto-resume [ 33.017405] hub 3-0:1.0: hub_resume [ 33.017436] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.017439] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.017454] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.017456] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.017470] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.017494] hub 3-0:1.0: hub_suspend [ 33.017507] usb usb3: bus auto-suspend, wakeup 1 [ 33.017522] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.017572] usb usb3: usb auto-resume [ 33.029352] hub 3-0:1.0: hub_resume [ 33.029381] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.029384] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.029403] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.029405] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.029430] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.029456] hub 3-0:1.0: hub_suspend [ 33.029475] usb usb3: bus auto-suspend, wakeup 1 [ 33.029490] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.030729] usb usb3: usb auto-resume [ 33.041338] hub 3-0:1.0: hub_resume [ 33.041360] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.041363] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.041380] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.041382] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.041402] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.041413] hub 3-0:1.0: hub_suspend [ 33.041442] usb usb3: bus auto-suspend, wakeup 1 [ 33.041469] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.041554] usb usb3: usb auto-resume [ 33.053340] hub 3-0:1.0: hub_resume [ 33.053353] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.053357] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.053380] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.053393] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.053430] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.053451] hub 3-0:1.0: hub_suspend [ 33.053468] usb usb3: bus auto-suspend, wakeup 1 [ 33.053483] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.061089] usb usb3: usb auto-resume [ 33.069363] hub 3-0:1.0: hub_resume [ 33.069379] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.069382] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.069402] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.069404] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.069457] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.069478] hub 3-0:1.0: hub_suspend [ 33.069495] usb usb3: bus auto-suspend, wakeup 1 [ 33.069510] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.069542] usb usb3: usb auto-resume [ 33.081489] hub 3-0:1.0: hub_resume [ 33.081505] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.081510] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.081531] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.081535] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.081595] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.081628] hub 3-0:1.0: hub_suspend [ 33.081644] usb usb3: bus auto-suspend, wakeup 1 [ 33.081658] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.083075] usb usb3: usb auto-resume [ 33.093394] hub 3-0:1.0: hub_resume [ 33.093419] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.093423] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.093456] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.093459] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.093526] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.093556] hub 3-0:1.0: hub_suspend [ 33.093579] usb usb3: bus auto-suspend, wakeup 1 [ 33.093597] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.093614] usb usb3: usb auto-resume [ 33.105378] hub 3-0:1.0: hub_resume [ 33.105400] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.105404] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.105430] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.105434] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.105461] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.105480] hub 3-0:1.0: hub_suspend [ 33.105504] usb usb3: bus auto-suspend, wakeup 1 [ 33.105522] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.109501] usb usb3: usb auto-resume [ 33.121280] hub 3-0:1.0: hub_resume [ 33.121299] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.121303] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.121327] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.121330] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.121357] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.121392] hub 3-0:1.0: hub_suspend [ 33.121411] usb usb3: bus auto-suspend, wakeup 1 [ 33.121427] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.121510] usb usb3: usb auto-resume [ 33.133282] hub 3-0:1.0: hub_resume [ 33.133299] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.133301] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.133319] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.133321] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.133337] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.133351] hub 3-0:1.0: hub_suspend [ 33.133368] usb usb3: bus auto-suspend, wakeup 1 [ 33.133384] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.134966] usb usb3: usb auto-resume [ 33.145275] hub 3-0:1.0: hub_resume [ 33.145292] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.145295] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.145316] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.145319] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.145339] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.145373] hub 3-0:1.0: hub_suspend [ 33.145396] usb usb3: bus auto-suspend, wakeup 1 [ 33.145412] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 33.145485] usb usb3: usb auto-resume [ 33.157254] hub 3-0:1.0: hub_resume [ 33.157270] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 33.157273] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.157295] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 33.157298] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 33.157318] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 33.157339] hub 3-0:1.0: hub_suspend [ 33.157356] usb usb3: bus auto-suspend, wakeup 1 [ 33.157371] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.161273] usb usb3: usb auto-resume [ 34.161295] hub 3-0:1.0: hub_resume [ 34.161305] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.161306] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.161382] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.161386] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.161509] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.161531] hub 3-0:1.0: hub_suspend [ 34.161570] usb usb3: bus auto-suspend, wakeup 1 [ 34.161600] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.163650] usb usb3: usb auto-resume [ 34.172567] hub 3-0:1.0: hub_resume [ 34.172594] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.172600] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.172642] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.172645] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.172735] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.172751] hub 3-0:1.0: hub_suspend [ 34.172764] usb usb3: bus auto-suspend, wakeup 1 [ 34.172778] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.172797] usb usb3: usb auto-resume [ 34.184579] hub 3-0:1.0: hub_resume [ 34.184606] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.184612] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.184661] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.184663] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.184690] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.184704] hub 3-0:1.0: hub_suspend [ 34.184720] usb usb3: bus auto-suspend, wakeup 1 [ 34.184735] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.186010] usb usb3: usb auto-resume [ 34.196578] hub 3-0:1.0: hub_resume [ 34.196593] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.196596] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.196693] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.196698] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.196834] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.196872] hub 3-0:1.0: hub_suspend [ 34.196890] usb usb3: bus auto-suspend, wakeup 1 [ 34.196905] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.196924] usb usb3: usb auto-resume [ 34.208514] hub 3-0:1.0: hub_resume [ 34.208527] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.208530] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.208547] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.208549] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.208570] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.208589] hub 3-0:1.0: hub_suspend [ 34.208606] usb usb3: bus auto-suspend, wakeup 1 [ 34.208622] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.219750] usb usb3: usb auto-resume [ 34.228581] hub 3-0:1.0: hub_resume [ 34.228602] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.228605] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.228637] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.228642] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.228693] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.228736] hub 3-0:1.0: hub_suspend [ 34.228756] usb usb3: bus auto-suspend, wakeup 1 [ 34.228773] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.228856] usb usb3: usb auto-resume [ 34.240485] hub 3-0:1.0: hub_resume [ 34.240499] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.240503] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.240561] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.240565] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.240589] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.240601] hub 3-0:1.0: hub_suspend [ 34.240625] usb usb3: bus auto-suspend, wakeup 1 [ 34.240639] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.241482] usb usb3: usb auto-resume [ 34.252556] hub 3-0:1.0: hub_resume [ 34.252574] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.252578] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.252600] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.252602] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.252665] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.252700] hub 3-0:1.0: hub_suspend [ 34.252717] usb usb3: bus auto-suspend, wakeup 1 [ 34.252732] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.252746] usb usb3: usb auto-resume [ 34.264547] hub 3-0:1.0: hub_resume [ 34.264577] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.264580] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.264613] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.264615] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.264665] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.264700] hub 3-0:1.0: hub_suspend [ 34.264717] usb usb3: bus auto-suspend, wakeup 1 [ 34.264732] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.266282] usb usb3: usb auto-resume [ 34.276504] hub 3-0:1.0: hub_resume [ 34.276518] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.276521] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.276554] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.276556] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.276615] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.276647] hub 3-0:1.0: hub_suspend [ 34.276662] usb usb3: bus auto-suspend, wakeup 1 [ 34.276677] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.276698] usb usb3: usb auto-resume [ 34.288497] hub 3-0:1.0: hub_resume [ 34.288512] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.288515] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.288536] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.288538] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.288595] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.288617] hub 3-0:1.0: hub_suspend [ 34.288645] usb usb3: bus auto-suspend, wakeup 1 [ 34.288659] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.290145] usb usb3: usb auto-resume [ 34.300524] hub 3-0:1.0: hub_resume [ 34.300538] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.300541] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.300560] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.300563] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.300617] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.300640] hub 3-0:1.0: hub_suspend [ 34.300659] usb usb3: bus auto-suspend, wakeup 1 [ 34.300674] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.300698] usb usb3: usb auto-resume [ 34.312482] hub 3-0:1.0: hub_resume [ 34.312497] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.312501] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.312524] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.312527] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.312583] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.312607] hub 3-0:1.0: hub_suspend [ 34.312627] usb usb3: bus auto-suspend, wakeup 1 [ 34.312643] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.316799] usb usb3: usb auto-resume [ 34.328494] hub 3-0:1.0: hub_resume [ 34.328509] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.328512] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.328534] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.328537] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.328586] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.328619] hub 3-0:1.0: hub_suspend [ 34.328690] usb usb3: bus auto-suspend, wakeup 1 [ 34.328709] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.328790] usb usb3: usb auto-resume [ 34.340462] hub 3-0:1.0: hub_resume [ 34.340477] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.340493] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.340559] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.340565] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.340626] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.340648] hub 3-0:1.0: hub_suspend [ 34.340665] usb usb3: bus auto-suspend, wakeup 1 [ 34.340680] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.344825] usb usb3: usb auto-resume [ 34.356467] hub 3-0:1.0: hub_resume [ 34.356484] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.356489] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.356522] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.356527] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.356701] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.356720] hub 3-0:1.0: hub_suspend [ 34.356737] usb usb3: bus auto-suspend, wakeup 1 [ 34.356751] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.356816] usb usb3: usb auto-resume [ 34.368443] hub 3-0:1.0: hub_resume [ 34.368458] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.368462] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.368510] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.368513] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.368566] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.368603] hub 3-0:1.0: hub_suspend [ 34.368618] usb usb3: bus auto-suspend, wakeup 1 [ 34.368632] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.369776] usb usb3: usb auto-resume [ 34.380431] hub 3-0:1.0: hub_resume [ 34.380446] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.380450] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.380473] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.380476] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.380532] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.380556] hub 3-0:1.0: hub_suspend [ 34.380577] usb usb3: bus auto-suspend, wakeup 1 [ 34.380592] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.380623] usb usb3: usb auto-resume [ 34.392435] hub 3-0:1.0: hub_resume [ 34.392452] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.392456] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.392480] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.392483] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.392544] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.392569] hub 3-0:1.0: hub_suspend [ 34.392591] usb usb3: bus auto-suspend, wakeup 1 [ 34.392608] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.399155] usb usb3: usb auto-resume [ 34.408433] hub 3-0:1.0: hub_resume [ 34.408453] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.408457] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.408491] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.408495] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.408532] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.408590] hub 3-0:1.0: hub_suspend [ 34.408657] usb usb3: bus auto-suspend, wakeup 1 [ 34.408690] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.408780] usb usb3: usb auto-resume [ 34.420403] hub 3-0:1.0: hub_resume [ 34.420434] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.420438] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.420475] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.420478] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.420538] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.420577] hub 3-0:1.0: hub_suspend [ 34.420597] usb usb3: bus auto-suspend, wakeup 1 [ 34.420613] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.422252] usb usb3: usb auto-resume [ 34.432435] hub 3-0:1.0: hub_resume [ 34.432450] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.432454] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.432473] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.432476] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.432533] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.432558] hub 3-0:1.0: hub_suspend [ 34.432579] usb usb3: bus auto-suspend, wakeup 1 [ 34.432595] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.432652] usb usb3: usb auto-resume [ 34.444386] hub 3-0:1.0: hub_resume [ 34.444402] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.444407] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.444431] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.444434] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.444493] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.444519] hub 3-0:1.0: hub_suspend [ 34.444541] usb usb3: bus auto-suspend, wakeup 1 [ 34.444557] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.446128] usb usb3: usb auto-resume [ 34.456419] hub 3-0:1.0: hub_resume [ 34.456435] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.456439] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.456461] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.456464] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.456524] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.456550] hub 3-0:1.0: hub_suspend [ 34.456572] usb usb3: bus auto-suspend, wakeup 1 [ 34.456589] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.456622] usb usb3: usb auto-resume [ 34.468370] hub 3-0:1.0: hub_resume [ 34.468387] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.468391] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.468415] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.468418] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.468479] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.468505] hub 3-0:1.0: hub_suspend [ 34.468527] usb usb3: bus auto-suspend, wakeup 1 [ 34.468544] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.470228] usb usb3: usb auto-resume [ 34.480403] hub 3-0:1.0: hub_resume [ 34.480420] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.480424] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.480445] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.480448] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.480509] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.480535] hub 3-0:1.0: hub_suspend [ 34.480557] usb usb3: bus auto-suspend, wakeup 1 [ 34.480573] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.480606] usb usb3: usb auto-resume [ 34.492353] hub 3-0:1.0: hub_resume [ 34.492370] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.492374] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.492399] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.492402] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.492461] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.492487] hub 3-0:1.0: hub_suspend [ 34.492509] usb usb3: bus auto-suspend, wakeup 1 [ 34.492526] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.494218] usb usb3: usb auto-resume [ 34.504385] hub 3-0:1.0: hub_resume [ 34.504402] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.504406] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.504428] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.504431] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.504492] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.504518] hub 3-0:1.0: hub_suspend [ 34.504540] usb usb3: bus auto-suspend, wakeup 1 [ 34.504557] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.504590] usb usb3: usb auto-resume [ 34.516336] hub 3-0:1.0: hub_resume [ 34.516353] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.516357] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.516381] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.516384] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.516443] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.516470] hub 3-0:1.0: hub_suspend [ 34.516492] usb usb3: bus auto-suspend, wakeup 1 [ 34.516508] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.519587] usb usb3: usb auto-resume [ 34.528375] hub 3-0:1.0: hub_resume [ 34.528406] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.528410] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.528518] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.528525] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.528591] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.528616] hub 3-0:1.0: hub_suspend [ 34.528637] usb usb3: bus auto-suspend, wakeup 1 [ 34.528652] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.528712] usb usb3: usb auto-resume [ 34.540325] hub 3-0:1.0: hub_resume [ 34.540354] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.540358] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.540395] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.540398] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.540460] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.540497] hub 3-0:1.0: hub_suspend [ 34.540517] usb usb3: bus auto-suspend, wakeup 1 [ 34.540533] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.544419] usb usb3: usb auto-resume [ 34.556320] hub 3-0:1.0: hub_resume [ 34.556340] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.556344] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.556378] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.556382] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.556491] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.556515] hub 3-0:1.0: hub_suspend [ 34.556535] usb usb3: bus auto-suspend, wakeup 1 [ 34.556551] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.556572] usb usb3: usb auto-resume [ 34.568300] hub 3-0:1.0: hub_resume [ 34.568316] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.568321] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.568345] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.568348] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.568408] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.568434] hub 3-0:1.0: hub_suspend [ 34.568456] usb usb3: bus auto-suspend, wakeup 1 [ 34.568472] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.570101] usb usb3: usb auto-resume [ 34.580332] hub 3-0:1.0: hub_resume [ 34.580349] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.580353] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.580375] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.580378] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.580437] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.580463] hub 3-0:1.0: hub_suspend [ 34.580485] usb usb3: bus auto-suspend, wakeup 1 [ 34.580502] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.580563] usb usb3: usb auto-resume [ 34.592284] hub 3-0:1.0: hub_resume [ 34.592300] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.592304] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.592329] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.592332] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.592392] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.592418] hub 3-0:1.0: hub_suspend [ 34.592440] usb usb3: bus auto-suspend, wakeup 1 [ 34.592456] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.594338] usb usb3: usb auto-resume [ 34.604316] hub 3-0:1.0: hub_resume [ 34.604333] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.604337] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.604358] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.604361] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.604420] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.604446] hub 3-0:1.0: hub_suspend [ 34.604468] usb usb3: bus auto-suspend, wakeup 1 [ 34.604485] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.604518] usb usb3: usb auto-resume [ 34.616265] hub 3-0:1.0: hub_resume [ 34.616282] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.616286] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.616311] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.616314] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.616376] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.616402] hub 3-0:1.0: hub_suspend [ 34.616424] usb usb3: bus auto-suspend, wakeup 1 [ 34.616439] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.618307] usb usb3: usb auto-resume [ 34.628300] hub 3-0:1.0: hub_resume [ 34.628317] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.628321] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.628343] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.628346] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.628406] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.628432] hub 3-0:1.0: hub_suspend [ 34.628454] usb usb3: bus auto-suspend, wakeup 1 [ 34.628471] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.628504] usb usb3: usb auto-resume [ 34.640248] hub 3-0:1.0: hub_resume [ 34.640265] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.640269] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.640293] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.640297] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.640358] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.640384] hub 3-0:1.0: hub_suspend [ 34.640406] usb usb3: bus auto-suspend, wakeup 1 [ 34.640422] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.642843] usb usb3: usb auto-resume [ 34.652338] hub 3-0:1.0: hub_resume [ 34.652359] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.652363] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.652467] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.652474] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.652543] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.652570] hub 3-0:1.0: hub_suspend [ 34.652592] usb usb3: bus auto-suspend, wakeup 1 [ 34.652609] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 34.652628] usb usb3: usb auto-resume [ 34.664233] hub 3-0:1.0: hub_resume [ 34.664268] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 34.664272] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.664310] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 34.664313] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 34.664375] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.664411] hub 3-0:1.0: hub_suspend [ 34.664433] usb usb3: bus auto-suspend, wakeup 1 [ 34.664449] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.667422] usb usb3: usb auto-resume [ 35.667483] hub 3-0:1.0: hub_resume [ 35.667496] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.667499] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.667535] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.667538] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.667605] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.667626] hub 3-0:1.0: hub_suspend [ 35.667647] usb usb3: bus auto-suspend, wakeup 1 [ 35.667665] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.667747] usb usb3: usb auto-resume [ 35.679630] hub 3-0:1.0: hub_resume [ 35.679661] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.679666] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.679770] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.679777] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.679913] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.679950] hub 3-0:1.0: hub_suspend [ 35.679971] usb usb3: bus auto-suspend, wakeup 1 [ 35.679989] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.683968] usb usb3: usb auto-resume [ 35.695578] hub 3-0:1.0: hub_resume [ 35.695605] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.695612] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.695649] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.695652] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.695712] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.695760] hub 3-0:1.0: hub_suspend [ 35.695825] usb usb3: bus auto-suspend, wakeup 1 [ 35.695845] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.695946] usb usb3: usb auto-resume [ 35.707544] hub 3-0:1.0: hub_resume [ 35.707568] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.707573] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.707657] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.707664] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.707735] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.707770] hub 3-0:1.0: hub_suspend [ 35.707791] usb usb3: bus auto-suspend, wakeup 1 [ 35.707807] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.712241] usb usb3: usb auto-resume [ 35.723551] hub 3-0:1.0: hub_resume [ 35.723590] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.723598] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.723691] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.723698] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.723746] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.723785] hub 3-0:1.0: hub_suspend [ 35.723845] usb usb3: bus auto-suspend, wakeup 1 [ 35.723863] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.723956] usb usb3: usb auto-resume [ 35.735466] hub 3-0:1.0: hub_resume [ 35.735486] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.735490] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.735561] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.735567] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.735637] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.735662] hub 3-0:1.0: hub_suspend [ 35.735682] usb usb3: bus auto-suspend, wakeup 1 [ 35.735698] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.737313] usb usb3: usb auto-resume [ 35.747497] hub 3-0:1.0: hub_resume [ 35.747519] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.747524] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.747550] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.747553] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.747633] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.747657] hub 3-0:1.0: hub_suspend [ 35.747677] usb usb3: bus auto-suspend, wakeup 1 [ 35.747693] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.747707] usb usb3: usb auto-resume [ 35.759503] hub 3-0:1.0: hub_resume [ 35.759527] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.759532] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.759560] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.759563] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.759620] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.759648] hub 3-0:1.0: hub_suspend [ 35.759670] usb usb3: bus auto-suspend, wakeup 1 [ 35.759687] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.762654] usb usb3: usb auto-resume [ 35.771512] hub 3-0:1.0: hub_resume [ 35.771548] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.771553] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.771656] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.771663] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.771782] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.771806] hub 3-0:1.0: hub_suspend [ 35.771826] usb usb3: bus auto-suspend, wakeup 1 [ 35.771842] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.771868] usb usb3: usb auto-resume [ 35.783493] hub 3-0:1.0: hub_resume [ 35.783518] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.783522] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.783550] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.783553] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.783611] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.783638] hub 3-0:1.0: hub_suspend [ 35.783660] usb usb3: bus auto-suspend, wakeup 1 [ 35.783677] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.788726] usb usb3: usb auto-resume [ 35.799526] hub 3-0:1.0: hub_resume [ 35.799547] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.799550] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.799621] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.799628] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.799691] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.799717] hub 3-0:1.0: hub_suspend [ 35.799737] usb usb3: bus auto-suspend, wakeup 1 [ 35.799754] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.799771] usb usb3: usb auto-resume [ 35.811480] hub 3-0:1.0: hub_resume [ 35.811505] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.811509] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.811534] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.811537] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.811593] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.811618] hub 3-0:1.0: hub_suspend [ 35.811639] usb usb3: bus auto-suspend, wakeup 1 [ 35.811655] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.815476] usb usb3: usb auto-resume [ 35.827477] hub 3-0:1.0: hub_resume [ 35.827496] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.827500] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.827543] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.827546] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.827651] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.827675] hub 3-0:1.0: hub_suspend [ 35.827693] usb usb3: bus auto-suspend, wakeup 1 [ 35.827709] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.827722] usb usb3: usb auto-resume [ 35.839445] hub 3-0:1.0: hub_resume [ 35.839477] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.839481] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.839518] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.839520] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.839576] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.839609] hub 3-0:1.0: hub_suspend [ 35.839628] usb usb3: bus auto-suspend, wakeup 1 [ 35.839643] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 35.849873] wlan0: authenticate with 00:04:0e:e4:00:3d [ 35.854542] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 35.856287] wlan0: authenticated [ 35.856489] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 35.856495] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 35.859324] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 35.862795] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 35.869569] wlan0: associated [ 35.869690] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 35.887217] usb usb3: usb auto-resume [ 35.887242] hub 3-0:1.0: hub_resume [ 35.887256] xhci_hcd 0000:03:00.0: get port status, actual port 0 status = 0x2a0 [ 35.887260] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.887298] xhci_hcd 0000:03:00.0: get port status, actual port 1 status = 0x2a0 [ 35.887300] xhci_hcd 0000:03:00.0: Get port status returned 0x100 [ 35.887501] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 35.887520] hub 3-0:1.0: hub_suspend [ 35.887540] usb usb3: bus auto-suspend, wakeup 1 [ 35.887556] xhci_hcd 0000:03:00.0: xhci_hub_status_data: stopping port polling. [ 36.223130] usb 1-1.2: unlink qh8-0e01/ffff880075744cc0 start 3 [1/2 us] [ 37.886247] usb 1-1.4: usb auto-suspend, wakeup 0 ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-22 11:13 ` Sedat Dilek 2013-08-22 11:22 ` Sedat Dilek @ 2013-08-22 11:30 ` Daniel Vetter 2013-08-22 11:32 ` Daniel Vetter 1 sibling, 1 reply; 16+ messages in thread From: Daniel Vetter @ 2013-08-22 11:30 UTC (permalink / raw) To: Sedat Dilek Cc: Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell, s.dilek On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: > dmesg (a lot of traces) and kernel-config attached. > > UXA causes still screen corruption. Hm, was only a slim chance that this patch would fix anything - I think you'd always see an oops when you'd hit this bug instead of just a bit of corruption. > $ egrep -i 'uxa|sna|accelmethod' /var/log/Xorg.0.log > [ 118.951] (**) intel(0): Option "AccelMethod" "uxa" > [ 118.960] (II) UXA(0): Driver registered support for the following > operations: > > - Sedat - > > Is "drm/i915: More vma fixups around unbind/destroy" the nearly same fix? Yeah, that version should get rid of the WARN noise in dmesg. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-22 11:30 ` Daniel Vetter @ 2013-08-22 11:32 ` Daniel Vetter 2013-08-23 7:55 ` Sedat Dilek 0 siblings, 1 reply; 16+ messages in thread From: Daniel Vetter @ 2013-08-22 11:32 UTC (permalink / raw) To: Sedat Dilek Cc: Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell, s.dilek On Thu, Aug 22, 2013 at 1:30 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: > On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >> dmesg (a lot of traces) and kernel-config attached. >> >> UXA causes still screen corruption. > > Hm, was only a slim chance that this patch would fix anything - I > think you'd always see an oops when you'd hit this bug instead of just > a bit of corruption. Ok, I think it's time to throw in the towel a bit. I've dropped commit d46f1c3f1372e3a72fab97c60480aa4a1084387f Author: Chris Wilson <chris@chris-wilson•co.uk> Date: Thu Aug 8 14:41:06 2013 +0100 drm/i915: Allow the GPU to cache stolen memory from my queue. I guess we can retry for 3.13 again. -Daniel -- Daniel Vetter Software Engineer, Intel Corporation +41 (0) 79 365 57 48 - http://blog.ffwll.ch ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-22 11:32 ` Daniel Vetter @ 2013-08-23 7:55 ` Sedat Dilek 2013-08-23 8:04 ` Sedat Dilek 0 siblings, 1 reply; 16+ messages in thread From: Sedat Dilek @ 2013-08-23 7:55 UTC (permalink / raw) To: Daniel Vetter; +Cc: Chris Wilson, linux-next, LKML, intel-gfx, Stephen Rothwell On Thu, Aug 22, 2013 at 1:32 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: > On Thu, Aug 22, 2013 at 1:30 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >>> dmesg (a lot of traces) and kernel-config attached. >>> >>> UXA causes still screen corruption. >> >> Hm, was only a slim chance that this patch would fix anything - I >> think you'd always see an oops when you'd hit this bug instead of just >> a bit of corruption. > > Ok, I think it's time to throw in the towel a bit. I've dropped > > > commit d46f1c3f1372e3a72fab97c60480aa4a1084387f > Author: Chris Wilson <chris@chris-wilson•co.uk> > Date: Thu Aug 8 14:41:06 2013 +0100 > > drm/i915: Allow the GPU to cache stolen memory > > from my queue. I guess we can retry for 3.13 again. I am sorry to keep someone's work to be delayed, really. I would have liked to see this fixed (and I have spent some time on it). Which patches did you exactly drop? - Sedat - ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-23 7:55 ` Sedat Dilek @ 2013-08-23 8:04 ` Sedat Dilek 2013-08-23 8:34 ` Chris Wilson 0 siblings, 1 reply; 16+ messages in thread From: Sedat Dilek @ 2013-08-23 8:04 UTC (permalink / raw) To: Daniel Vetter; +Cc: Stephen Rothwell, intel-gfx, linux-next, LKML On Fri, Aug 23, 2013 at 9:55 AM, Sedat Dilek <sedat.dilek@gmail•com> wrote: > On Thu, Aug 22, 2013 at 1:32 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> On Thu, Aug 22, 2013 at 1:30 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >>> On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >>>> dmesg (a lot of traces) and kernel-config attached. >>>> >>>> UXA causes still screen corruption. >>> >>> Hm, was only a slim chance that this patch would fix anything - I >>> think you'd always see an oops when you'd hit this bug instead of just >>> a bit of corruption. >> >> Ok, I think it's time to throw in the towel a bit. I've dropped >> >> >> commit d46f1c3f1372e3a72fab97c60480aa4a1084387f >> Author: Chris Wilson <chris@chris-wilson•co.uk> >> Date: Thu Aug 8 14:41:06 2013 +0100 >> >> drm/i915: Allow the GPU to cache stolen memory >> >> from my queue. I guess we can retry for 3.13 again. > > I am sorry to keep someone's work to be delayed, really. > I would have liked to see this fixed (and I have spent some time on it). > > Which patches did you exactly drop? > Sorry for bombing you with question... I am trying latest Linus-tree HEAD with the drm-intel-nightly I made my last testings. Are any of these TLB / x86-get_unmapped_area fixes of interested... has any effects on the reported issue? I still wonder what is the root-cause... I mean if SNA is OK but UXA not and Linux graphics stack is that complex. ( Can't say if user-space like unity isn't involved... ). - Sedat - [1] Fix TLB gather virtual address range invalidation corner cases http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/patch/?id=2b047252d087be7f2ba088b4933cd904f92e6fce [2] Revert "x86 get_unmapped_area(): use proper mmap base for bottom-up direction" http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/patch/?id=5ea80f76a56605a190a7ea16846c82aa63dbd0aa [3] x86 get_unmapped_area: Access mmap_legacy_base through mm_struct member http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/patch/?id=41aacc1eea645c99edbe8fbcf78a97dc9b862adc ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-23 8:04 ` Sedat Dilek @ 2013-08-23 8:34 ` Chris Wilson 2013-08-23 8:47 ` Sedat Dilek ` (2 more replies) 0 siblings, 3 replies; 16+ messages in thread From: Chris Wilson @ 2013-08-23 8:34 UTC (permalink / raw) To: Sedat Dilek; +Cc: Daniel Vetter, intel-gfx, linux-next, LKML, Stephen Rothwell On Fri, Aug 23, 2013 at 10:04:37AM +0200, Sedat Dilek wrote: > On Fri, Aug 23, 2013 at 9:55 AM, Sedat Dilek <sedat.dilek@gmail•com> wrote: > > On Thu, Aug 22, 2013 at 1:32 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: > >> On Thu, Aug 22, 2013 at 1:30 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: > >>> On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: > >>>> dmesg (a lot of traces) and kernel-config attached. > >>>> > >>>> UXA causes still screen corruption. > >>> > >>> Hm, was only a slim chance that this patch would fix anything - I > >>> think you'd always see an oops when you'd hit this bug instead of just > >>> a bit of corruption. > >> > >> Ok, I think it's time to throw in the towel a bit. I've dropped > >> > >> > >> commit d46f1c3f1372e3a72fab97c60480aa4a1084387f > >> Author: Chris Wilson <chris@chris-wilson•co.uk> > >> Date: Thu Aug 8 14:41:06 2013 +0100 > >> > >> drm/i915: Allow the GPU to cache stolen memory Hmm, wrong patch. Unless you have a good reason, you just want to drop the ringbuffers in stolen. > >> from my queue. I guess we can retry for 3.13 again. > > > > I am sorry to keep someone's work to be delayed, really. > > I would have liked to see this fixed (and I have spent some time on it). It's just a minor memory optimization (reclaiming less than a megabyte of system memory). > > Which patches did you exactly drop? > > > > Sorry for bombing you with question... > > I am trying latest Linus-tree HEAD with the drm-intel-nightly I made > my last testings. > > Are any of these TLB / x86-get_unmapped_area fixes of interested... > has any effects on the reported issue? It should not. Of concern is how the GPU views the world which has its own independent set of TLBs and mapping tables - and access to those should always be uncached from the CPU's perspective. > I still wonder what is the root-cause... > I mean if SNA is OK but UXA not and Linux graphics stack is that complex. > ( Can't say if user-space like unity isn't involved... ). All that userspace can affect here is the timing and inital contents of the framebuffer, everything else is controlled by the kernel. All the testing we have done so far imply that the kernel's view of the machine state is consistent with our expectations, but the display is doing something inexplicable. -Chris -- Chris Wilson, Intel Open Source Technology Centre ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-23 8:34 ` Chris Wilson @ 2013-08-23 8:47 ` Sedat Dilek 2013-08-24 9:35 ` Sedat Dilek 2013-08-24 10:55 ` Sedat Dilek 2 siblings, 0 replies; 16+ messages in thread From: Sedat Dilek @ 2013-08-23 8:47 UTC (permalink / raw) To: Chris Wilson, Daniel Vetter, linux-next, LKML, intel-gfx, Stephen Rothwell On Fri, Aug 23, 2013 at 10:34 AM, Chris Wilson <chris@chris-wilson•co.uk> wrote: > On Fri, Aug 23, 2013 at 10:04:37AM +0200, Sedat Dilek wrote: >> On Fri, Aug 23, 2013 at 9:55 AM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >> > On Thu, Aug 22, 2013 at 1:32 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> >> On Thu, Aug 22, 2013 at 1:30 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> >>> On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >> >>>> dmesg (a lot of traces) and kernel-config attached. >> >>>> >> >>>> UXA causes still screen corruption. >> >>> >> >>> Hm, was only a slim chance that this patch would fix anything - I >> >>> think you'd always see an oops when you'd hit this bug instead of just >> >>> a bit of corruption. >> >> >> >> Ok, I think it's time to throw in the towel a bit. I've dropped >> >> >> >> >> >> commit d46f1c3f1372e3a72fab97c60480aa4a1084387f >> >> Author: Chris Wilson <chris@chris-wilson•co.uk> >> >> Date: Thu Aug 8 14:41:06 2013 +0100 >> >> >> >> drm/i915: Allow the GPU to cache stolen memory > > Hmm, wrong patch. Unless you have a good reason, you just want to drop > the ringbuffers in stolen. > >> >> from my queue. I guess we can retry for 3.13 again. >> > >> > I am sorry to keep someone's work to be delayed, really. >> > I would have liked to see this fixed (and I have spent some time on it). > > It's just a minor memory optimization (reclaiming less than a megabyte > of system memory). > >> > Which patches did you exactly drop? >> > >> >> Sorry for bombing you with question... >> >> I am trying latest Linus-tree HEAD with the drm-intel-nightly I made >> my last testings. >> >> Are any of these TLB / x86-get_unmapped_area fixes of interested... >> has any effects on the reported issue? > > It should not. Of concern is how the GPU views the world which has its > own independent set of TLBs and mapping tables - and access to those > should always be uncached from the CPU's perspective. > s Linux-v3.11-rc6-76-g6a7492a with my last d-i-n on top shows still the same issue with UXA. So, this is unrelated. >> I still wonder what is the root-cause... >> I mean if SNA is OK but UXA not and Linux graphics stack is that complex. >> ( Can't say if user-space like unity isn't involved... ). > > All that userspace can affect here is the timing and inital contents of > the framebuffer, everything else is controlled by the kernel. All the > testing we have done so far imply that the kernel's view of the machine > state is consistent with our expectations, but the display is doing > something inexplicable. I checked for a new BIOS, but version 13XK is the last available. If I start in text-mode and then run from my VT-1 lightdm service manually I see this screen/display corruption. On a restart of lightdm everything is fine. How can I check if my greeter and/or unity(-2d) is the culprit? AFAICS I have here E17 for testing. I made no benchmark with the (new) d-i-n w/ dropped patches. Lemme see if I find some time. - Sedat - ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-23 8:34 ` Chris Wilson 2013-08-23 8:47 ` Sedat Dilek @ 2013-08-24 9:35 ` Sedat Dilek 2013-08-24 10:55 ` Sedat Dilek 2 siblings, 0 replies; 16+ messages in thread From: Sedat Dilek @ 2013-08-24 9:35 UTC (permalink / raw) To: Chris Wilson, Daniel Vetter, linux-next, LKML, intel-gfx, Stephen Rothwell On Fri, Aug 23, 2013 at 10:34 AM, Chris Wilson <chris@chris-wilson•co.uk> wrote: > On Fri, Aug 23, 2013 at 10:04:37AM +0200, Sedat Dilek wrote: >> On Fri, Aug 23, 2013 at 9:55 AM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >> > On Thu, Aug 22, 2013 at 1:32 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> >> On Thu, Aug 22, 2013 at 1:30 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> >>> On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >> >>>> dmesg (a lot of traces) and kernel-config attached. >> >>>> >> >>>> UXA causes still screen corruption. >> >>> >> >>> Hm, was only a slim chance that this patch would fix anything - I >> >>> think you'd always see an oops when you'd hit this bug instead of just >> >>> a bit of corruption. >> >> >> >> Ok, I think it's time to throw in the towel a bit. I've dropped >> >> >> >> >> >> commit d46f1c3f1372e3a72fab97c60480aa4a1084387f >> >> Author: Chris Wilson <chris@chris-wilson•co.uk> >> >> Date: Thu Aug 8 14:41:06 2013 +0100 >> >> >> >> drm/i915: Allow the GPU to cache stolen memory > > Hmm, wrong patch. Unless you have a good reason, you just want to drop > the ringbuffers in stolen. > >> >> from my queue. I guess we can retry for 3.13 again. Just to clarify... I pulled in today's d-i-n (e1a7374a9920cbbb085ca310e50c903d182d1ca9) on top of Linus-git HEAD (v3.11-rc6-139-g89b53e5). This is the list of drm/i915 patches containing "stolen": drm/i915: Free stolen node on failed preallocation drm/i915: Verify that our stolen memory doesn't conflict drm/i915: Use Graphics Base of Stolen Memory on all gen3+ drm/i915: List objects allocated from stolen memory in debugfs drm/i915: Allow the GPU to cache stolen memory <--- *** NOT DROPPED *** drm/i915: less magic for stolen preallocated objects w/o gtt offset drm/i915: WARN if the bios reserved range is bigger than stolen size drm/i915: disable stolen mem for OVERLAY_NEEDS_PHYSICAL drm/i915: clarify error paths in create_stolen_for_preallocated So the culprit patch "drm/i915: Allocate LLC ringbuffers from stolen" seems to be gone. I have not compared against my other cumulated patches. As far as I understood Daniel he dropped a patchset, but I might have understood him wrong. - Sedat - ^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] 2013-08-23 8:34 ` Chris Wilson 2013-08-23 8:47 ` Sedat Dilek 2013-08-24 9:35 ` Sedat Dilek @ 2013-08-24 10:55 ` Sedat Dilek 2 siblings, 0 replies; 16+ messages in thread From: Sedat Dilek @ 2013-08-24 10:55 UTC (permalink / raw) To: Chris Wilson, Daniel Vetter, linux-next, LKML, intel-gfx, Stephen Rothwell On Fri, Aug 23, 2013 at 10:34 AM, Chris Wilson <chris@chris-wilson•co.uk> wrote: > On Fri, Aug 23, 2013 at 10:04:37AM +0200, Sedat Dilek wrote: >> On Fri, Aug 23, 2013 at 9:55 AM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >> > On Thu, Aug 22, 2013 at 1:32 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> >> On Thu, Aug 22, 2013 at 1:30 PM, Daniel Vetter <daniel.vetter@ffwll•ch> wrote: >> >>> On Thu, Aug 22, 2013 at 1:13 PM, Sedat Dilek <sedat.dilek@gmail•com> wrote: >> >>>> dmesg (a lot of traces) and kernel-config attached. >> >>>> >> >>>> UXA causes still screen corruption. >> >>> >> >>> Hm, was only a slim chance that this patch would fix anything - I >> >>> think you'd always see an oops when you'd hit this bug instead of just >> >>> a bit of corruption. >> >> >> >> Ok, I think it's time to throw in the towel a bit. I've dropped >> >> >> >> >> >> commit d46f1c3f1372e3a72fab97c60480aa4a1084387f >> >> Author: Chris Wilson <chris@chris-wilson•co.uk> >> >> Date: Thu Aug 8 14:41:06 2013 +0100 >> >> >> >> drm/i915: Allow the GPU to cache stolen memory > > Hmm, wrong patch. Unless you have a good reason, you just want to drop > the ringbuffers in stolen. > >> >> from my queue. I guess we can retry for 3.13 again. >> > >> > I am sorry to keep someone's work to be delayed, really. >> > I would have liked to see this fixed (and I have spent some time on it). > > It's just a minor memory optimization (reclaiming less than a megabyte > of system memory). > >> > Which patches did you exactly drop? >> > >> >> Sorry for bombing you with question... >> >> I am trying latest Linus-tree HEAD with the drm-intel-nightly I made >> my last testings. >> >> Are any of these TLB / x86-get_unmapped_area fixes of interested... >> has any effects on the reported issue? > > It should not. Of concern is how the GPU views the world which has its > own independent set of TLBs and mapping tables - and access to those > should always be uncached from the CPU's perspective. > >> I still wonder what is the root-cause... >> I mean if SNA is OK but UXA not and Linux graphics stack is that complex. >> ( Can't say if user-space like unity isn't involved... ). > > All that userspace can affect here is the timing and inital contents of > the framebuffer, everything else is controlled by the kernel. All the > testing we have done so far imply that the kernel's view of the machine > state is consistent with our expectations, but the display is doing > something inexplicable. Can this be a problem? [ dmesg ] [ 27.949704] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 27.949708] [drm] This can cause pipe underruns and display issues. [ 27.949709] [drm] Please upgrade your BIOS to fix this. - Sedat - ^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2013-08-24 10:55 UTC | newest] Thread overview: 16+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2013-08-21 10:35 linux-next: Tree for Aug 21 [ screen corruption in graphical mode ] Sedat Dilek 2013-08-21 13:44 ` Daniel Vetter 2013-08-21 18:11 ` Sedat Dilek 2013-08-21 21:20 ` Daniel Vetter 2013-08-22 6:32 ` Sedat Dilek 2013-08-22 7:24 ` Daniel Vetter 2013-08-22 11:13 ` Sedat Dilek 2013-08-22 11:22 ` Sedat Dilek 2013-08-22 11:30 ` Daniel Vetter 2013-08-22 11:32 ` Daniel Vetter 2013-08-23 7:55 ` Sedat Dilek 2013-08-23 8:04 ` Sedat Dilek 2013-08-23 8:34 ` Chris Wilson 2013-08-23 8:47 ` Sedat Dilek 2013-08-24 9:35 ` Sedat Dilek 2013-08-24 10:55 ` Sedat Dilek
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox