* Setting 2 ports in 860T
@ 2001-03-17 16:23 Arturo Nunez
0 siblings, 0 replies; only message in thread
From: Arturo Nunez @ 2001-03-17 16:23 UTC (permalink / raw)
To: linuxppc-embedded
Hello:
As a newby had some problems compiling the kernel, but finally I could
do that.
Now my system is a :
-RPX CLLF
-CPU=XPC860TZP50B5
I have compiled the kernel 2.4 from bitkeeper.
Basically doing :
- make rpxcllf_config
Now when I boot the board with the new kernell, even it recognizes both
ports,10 and 100 Mbits, as eth0 and eth1, I cant work with the 100
port.
The 10 port gets and Ip using dhcpd
I manually give and IP to the 100 port.
But when I disconnect the cable from the 100 port, as a test, the 10
port answers.
So it seems to be that the 100 port haven been totally configured.
Any Suggestion will be appreciate.
Regards
Arturo Nunez
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-03-17 16:23 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-03-17 16:23 Setting 2 ports in 860T Arturo Nunez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox