* booting linux on powerpc 405
@ 2005-06-21 8:13 vinod b
2005-06-21 9:24 ` Eugene Surovegin
2005-06-21 12:42 ` Sam Song
0 siblings, 2 replies; 5+ messages in thread
From: vinod b @ 2005-06-21 8:13 UTC (permalink / raw)
To: linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 6863 bytes --]
I am sending the output on the minicom window can some
body tell me what is the problem.It <http://problem.It> will be of great
help.
Welcome to minicom 2.00.0
OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n
Compiled on Jan 25 2003, 00:15:18.
Press CTRL-A Z for help on special keys
405GP 1.13 ROM Monitor (4/7/00)
--------------------- System Info ----------------------
Processor = 405GP, PVR: 40110082
Processor speed = 200 MHz
PLB speed = 100 MHz
OPB speed = 50 MHz
Ext Bus speed = 50 MHz
PCI Bus speed = 33 MHz (Sync)
Amount of SDRAM = 32 MBytes
Internal PCI arbiter enabled
--------------------------------------------------------
--- Device Configuration ---
Power-On Test Devices:
000 Disabled System Memory [RAM]
001 Disabled Ethernet [ENET]
004 Disabled Serial Port 2 [S2]
----------------------------
Boot Sources:
001 Enabled Ethernet [ENET]
local=192.0.1.253 <http://192.0.1.253>
remote=192.0.1.21 <http://192.0.1.21> hwaddr=0004ace30f38
004 Disabled Serial Port 2 [S2]
local=8.1.1.2 <http://8.1.1.2>
remote=255.255.255.255 <http://255.255.255.255> hwaddr=ffffffffffff
005 Disabled Serial Port 1 [S1]
----------------------------
Debugger: Disabled
----------------------------
1 - Enable/disable tests
2 - Enable/disable boot devices
3 - Change IP addresses
4 - Ping test
5 - Toggle ROM monitor debugger
6 - Toggle automatic menu
7 - Display configuration
8 - Save changes to configuration
9 - Set baud rate for s1 boot
A - Enable/disable I cache (Enabled )
B - Enable/disable D cache (Disabled)
0 - Exit menu and continue
->
1 - Enable/disable tests
2 - Enable/disable boot devices
3 - Change IP addresses
4 - Ping test
5 - Toggle ROM monitor debugger
6 - Toggle automatic menu
7 - Display configuration
8 - Save changes to configuration
9 - Set baud rate for s1 boot
A - Enable/disable I cache (Enabled )
B - Enable/disable D cache (Disabled)
0 - Exit menu and continue
->0
ENET Speed is 100 Mbs...
FULL duplex connection
Booting from [ENET] Ethernet ...
Sending bootp request ...
Loading file "/tftpboot/zImage.treeboot" ...
Sending tftp boot request ...
Transfer Complete ...
Loaded successfully ...
Entry point at 0x500000 ...
loaded at: 00500000 0059E1F8
relocated to: 00400000 0049E1F8
board data at: 0049B128 0049B168
relocated to: 00405470 004054B0
zimage at: 004059AC 0049AB26
avail ram: 0049F000 02000000
Linux/PPC load: root=/dev/nfs rw ip=on
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.18_mvl30-405ep_eval (root@AUM-SAI) (gcc version
3.2.1 20020930 (MontaVista)) #1 Sun Jun 19 13:50:01 IST 25
IBM Walnut (IBM405GP) Platform
Port by MontaVista Software, Inc. (source@mvista•com)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw ip=on
Calibrating delay loop... 199.47 BogoMIPS
Memory: 30788k available (1024k kernel code, 344k data, 72k init, 0k highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
OCP uart ver 1.2.1 init complete
Starting kswapd
Disabling the Out Of Memory Killer
i2c-core.o: i2c core module version 2.6.2 (20011118)
initialize_kbd: Keyboard reset failed, no ACK
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0xef600300 (irq = 0) is a 16550A
ttyS01 at 0xef600400 (irq = 1) is a 16550A
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eth0: Phy @ 0x1, type DP83843 (0x20005c10)
Reset ethernet interfaces
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
opening eth0 on emac 0
eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation complete.
eth0: IBM EMAC: MAC 00:04:ac:e3:0f:38.
eth0: IBM EMAC: open completed
Sending BOOTP and RARP requests . OK
IP-Config: Got BOOTP answer from 192.0.1.21 <http://192.0.1.21>, my
address is 192.0.1.253 <http://192.0.1.253>
IP-Config: Complete:
device=eth0, addr=192.0.1.253 <http://192.0.1.253>,
mask=255.255.255.0 <http://255.255.255.0>, gw=255.255.255.255
<http://255.255.255.255>,
host=192.0.1.253 <http://192.0.1.253>, domain=, nis-domain=(none),
bootserver=192.0.1.21 <http://192.0.1.21>, rootserver=192.0.1.21
<http://192.0.1.21>, rootpath=/home/walnut/target
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.0.1.21 <http://192.0.1.21>
Looking up port of RPC 100005/1 on 192.0.1.21 <http://192.0.1.21>
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 72k init
Warning: unable to open an initial console.
nfs: server 192.0.1.21 <http://192.0.1.21> not responding, still trying
nfs: server 192.0.1.21 <http://192.0.1.21> OK
Oops: kernel access of bad area, sig: 11
NIP: C0004A48 XER: 00000000 LR: C000DC98 SP: C1FEF590 REGS: c1fef4d0
TRAP: 0800 Not tainted
MSR: 00001030 EE: 0 PR: 0 FP: 0 ME: 1 IR/DR: 11
DEAR: 00000000, ESR: 00000000
TASK = c1fee000[1] 'swapper' Last syscall: 11
last math 00000000 last altivec 00000000
PLB0: bear= 0x10000000 acr= 0x00000000 besr= 0x00000000
PLB0 to OPB: bear= 0x119a3470 besr0= 0x00000000 besr1= 0x00000000
GPR00: C00A081C C1FEF590 C1FEE000 00000000 00000005 0000001F 00000000 C1FCD260
GPR08: 00000002 C1FD3158 C1FCD2D8 C1FD302C 00784263 00000000 00000003 00000000
GPR16: 00000000 FFFE21AD 00000000 C1FCD460 00000002 C1FCD480 00000000 00000000
GPR24: C00E00A4 C1FEF6E8 C3004800 00000000 00000000 C1FD3000 00000000 0000009A
Call backtrace:
C0000000 C00A081C C00B894C C00B1410 C00B5EB0 C00C45D0 C00C32E0
C00C3D8C C00E0404 C00E7724 C00A96FC C00F4518 C00F373C C00F36C4
C00F1794 C00F5AA4 C00F5D5C C00F0EF4 C006B944 C00657DC C0042744
C0042C6C C0042FE8 C0040060 C0055D98 C00409EC C0040C14 C0005644
C00028FC C0002708 C0004E6C
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
<0>Rebooting in 180 seconds..<NULL>
Thanking you all.......
--
vinod
[-- Attachment #2: Type: text/html, Size: 7893 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: booting linux on powerpc 405
2005-06-21 8:13 vinod b
@ 2005-06-21 9:24 ` Eugene Surovegin
2005-06-21 12:42 ` Sam Song
1 sibling, 0 replies; 5+ messages in thread
From: Eugene Surovegin @ 2005-06-21 9:24 UTC (permalink / raw)
To: vinod b; +Cc: linuxppc-embedded
On Tue, Jun 21, 2005 at 01:43:23PM +0530, vinod b wrote:
> I am sending the output on the minicom window can some
> body tell me what is the problem.It <http://problem.It> will be of great
> help.
[snip]
> Linux version 2.4.18_mvl30-405ep_eval (root@AUM-SAI) (gcc version
> 3.2.1 20020930 (MontaVista)) #1 Sun Jun 19 13:50:01 IST 25
> IBM Walnut (IBM405GP) Platform
So, is it Walnut or 405EP eval?????
> PLB0: bear= 0x10000000 acr= 0x00000000 besr= 0x00000000
> PLB0 to OPB: bear= 0x119a3470 besr0= 0x00000000 besr1= 0x00000000
>
> GPR00: C00A081C C1FEF590 C1FEE000 00000000 00000005 0000001F 00000000 C1FCD260
> GPR08: 00000002 C1FD3158 C1FCD2D8 C1FD302C 00784263 00000000 00000003 00000000
> GPR16: 00000000 FFFE21AD 00000000 C1FCD460 00000002 C1FCD480 00000000 00000000
> GPR24: C00E00A4 C1FEF6E8 C3004800 00000000 00000000 C1FD3000 00000000 0000009A
> Call backtrace:
> C0000000 C00A081C C00B894C C00B1410 C00B5EB0 C00C45D0 C00C32E0
> C00C3D8C C00E0404 C00E7724 C00A96FC C00F4518 C00F373C C00F36C4
> C00F1794 C00F5AA4 C00F5D5C C00F0EF4 C006B944 C00657DC C0042744
> C0042C6C C0042FE8 C0040060 C0055D98 C00409EC C0040C14 C0005644
> C00028FC C0002708 C0004E6C
These numbers are useless for anybody here, please decode this oops
(using ppc_405-ksymoops) if you expect any help.
--
Eugene
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: booting linux on powerpc 405
2005-06-21 8:13 vinod b
2005-06-21 9:24 ` Eugene Surovegin
@ 2005-06-21 12:42 ` Sam Song
1 sibling, 0 replies; 5+ messages in thread
From: Sam Song @ 2005-06-21 12:42 UTC (permalink / raw)
To: vinod b; +Cc: linuxppc-embedded
vinod b <bvinodsmail@gmail•com>wrote:
[snip]
> Looking up port of RPC 100005/1 on 192.0.1.21
> <http://192.0.1.21>
> VFS: Mounted root (nfs filesystem).
> Freeing unused kernel memory: 72k init
> Warning: unable to open an initial console.
Pls check the dev directory on your NFS mount point.
Is there any console node to work?
Best regards,
Sam
___________________________________________________________
雅虎邮箱超强增值服务－2G超大空间、pop3收信、无限量邮件提醒
http://cn.mail.yahoo.com/mail_alert/promo1.html
^ permalink raw reply [flat|nested] 5+ messages in thread
* booting linux on powerpc 405
@ 2005-06-22 4:49 vinod b
2005-06-22 19:49 ` vbordug
0 siblings, 1 reply; 5+ messages in thread
From: vinod b @ 2005-06-22 4:49 UTC (permalink / raw)
To: samlinuxppc, linuxppc-embedded
[-- Attachment #1: Type: text/plain, Size: 6056 bytes --]
thanks for the response sir.
sir i created nodes on the dev directory using the command mknode.Even after
doing this i have problem.I do not know if there is any problem with nfs
server.But as it is seen in the output on the minicom window sigseg signal
occeurs then kernel panic happens.So how can this problem be solved.
I am sending the new output
Welcome to minicom 2.00.0
OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n
Compiled on Jan 25 2003, 00:15:18.
Press CTRL-A Z for help on special keys
405GP 1.13 ROM Monitor (4/7/00)
--------------------- System Info ----------------------
Processor = 405GP, PVR: 40110082
Processor speed = 200 MHz
PLB speed = 100 MHz
OPB speed = 50 MHz
Ext Bus speed = 50 MHz
PCI Bus speed = 33 MHz (Sync)
Amount of SDRAM = 32 MBytes
Internal PCI arbiter enabled
--------------------------------------------------------
--- Device Configuration ---
Power-On Test Devices:
000 Disabled System Memory [RAM]
001 Disabled Ethernet [ENET]
004 Disabled Serial Port 2 [S2]
----------------------------
Boot Sources:
001 Enabled Ethernet [ENET]
local=192.0.1.253 <http://192.0.1.253> remote=192.0.1.50
<http://192.0.1.50>hwaddr=0004ace30f38
004 Disabled Serial Port 2 [S2]
local=8.1.1.2 <http://8.1.1.2>
remote=255.255.255.255<http://255.255.255.255>hwaddr=ffffffffffff
005 Disabled Serial Port 1 [S1]
----------------------------
Debugger: Disabled
----------------------------
1 - Enable/disable tests
2 - Enable/disable boot devices
3 - Change IP addresses
4 - Ping test
5 - Toggle ROM monitor debugger
6 - Toggle automatic menu
7 - Display configuration
8 - Save changes to configuration
9 - Set baud rate for s1 boot
A - Enable/disable I cache (Enabled )
B - Enable/disable D cache (Disabled)
0 - Exit menu and continue
->0
ENET Speed is 100 Mbs...
FULL duplex connection
Booting from [ENET] Ethernet ...
Sending bootp request ...
Loading file "/tftpboot/zImage.treeboot" ...
Sending tftp boot request ...
Transfer Complete ...
Loaded successfully ...
Entry point at 0x500000 ...
loaded at: 00500000 0059E1F8
relocated to: 00400000 0049E1F8
board data at: 0049B128 0049B168
relocated to: 00405470 004054B0
zimage at: 004059AC 0049A376
avail ram: 0049F000 02000000
Linux/PPC load: root=/dev/nfs rw ip=on
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.4.18_mvl30-405ep_eval (root@sairam) (gcc version
3.2.1200209305IBM Walnut (IBM405GP) Platform
Port by MontaVista Software, Inc. (source@mvista•com)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/nfs rw ip=on
Calibrating delay loop... 199.47 BogoMIPS
Memory: 30800k available (1024k kernel code, 332k data, 72k init, 0k
highmem)
Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
OCP uart ver 1.2.1 init complete
Starting kswapd
Disabling the Out Of Memory Killer
i2c-core.o: i2c core module version 2.6.2 (20011118)
initialize_kbd: Keyboard reset failed, no ACK
Detected PS/2 Mouse Port.
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI edttyS00 at 0xef600300 (irq = 0) is a 16550A
ttyS01 at 0xef600400 (irq = 1) is a 16550A
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
eth0: Phy @ 0x1, type DP83843 (0x20005c10)
Reset ethernet interfaces
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
opening eth0 on emac 0
eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation complete.
eth0: IBM EMAC: MAC 00:04:ac:e3:0f:38.
eth0: IBM EMAC: open completed
Sending BOOTP and RARP requests . OK
IP-Config: Got BOOTP answer from 192.0.1.50 <http://192.0.1.50>, my address
is 192.0.1.253 <http://192.0.1.253>
IP-Config: Complete:
device=eth0, addr=192.0.1.253 <http://192.0.1.253>,
mask=255.255.255.0<http://255.255.255.0>,
gw=255.255.255.255 <http://255.255.255.255>,
host=192.0.1.253 <http://192.0.1.253>, domain=, nis-domain=(none),
bootserver=192.0.1.50 <http://192.0.1.50>,
rootserver=192.0.1.50<http://192.0.1.50>,
rootpath=/home/vinod/target
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Looking up port of RPC 100003/2 on 192.0.1.50 <http://192.0.1.50>
Looking up port of RPC 100005/1 on 192.0.1.50 <http://192.0.1.50>
VFS: Mounted root (nfs filesystem).
Freeing unused kernel memory: 72k init
Oops: kernel access of bad area, sig: 11
NIP: C00EB22C XER: 00000000 LR: C00E900C SP: C0121CB0 REGS: c0121bf0 TRAP:
0800dMSR: 00009030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
DEAR: 00000000, ESR: 00000000
TASK = c011fff0[0] 'swapper' Last syscall: 120
last math 00000000 last altivec 00000000
PLB0: bear= 0x10000000 acr= 0x00000000 besr= 0x00000000
PLB0 to OPB: bear= 0x00001024 besr0= 0x00000000 besr1= 0x00000000
GPR00: 00000000 C0121CB0 C011FFF0 C1FD0060 C0121CE8 C0121D08 00000000
C1FD6000
GPR08: C0121D60 00000000 00000000 00000000 44000044 00020000 000C0804
00000000
GPR16: 00020000 FFFE21AD C0121D58 C0121D58 00000153 00000001 C1FD5D00
00000000
GPR24: 00000000 C0121CE8 C0121D08 C0121D08 C0121CE8 C1FB0280 00000000
C1FD6000
Call backtrace:
00000000 C00E900C C00BD16C C00BD280 C00C0124 C00BFC24 C00B115C
C0017684 C0003BE0 C0002B4C C00215D4 C00040A8 C00040D0 C0002418
C01317A8 C0002318
Kernel panic: Aiee, killing interrupt handler!
In interrupt handler - not syncing
--
vinod
S.S.S.I.H.L
[-- Attachment #2: Type: text/html, Size: 13669 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: booting linux on powerpc 405
2005-06-22 4:49 booting linux on powerpc 405 vinod b
@ 2005-06-22 19:49 ` vbordug
0 siblings, 0 replies; 5+ messages in thread
From: vbordug @ 2005-06-22 19:49 UTC (permalink / raw)
To: vinod b; +Cc: linuxppc-embedded
Hello.I am not an expert regarding this board but the output below looks like it is something wrong with root fs-like you use a rfs built for another arch. Just a pure guess..
On Wed, Jun 22, 2005 at 10:19:37AM +0530, vinod b wrote:
> thanks for the response sir.
>
> sir i created nodes on the dev directory using the command mknode.Even after
> doing this i have problem.I do not know if there is any problem with nfs
> server.But as it is seen in the output on the minicom window sigseg signal
> occeurs then kernel panic happens.So how can this problem be solved.
>
> I am sending the new output
> Welcome to minicom 2.00.0
>
> OPTIONS: History Buffer, F-key Macros, Search History Buffer, I18n
> Compiled on Jan 25 2003, 00:15:18.
>
> Press CTRL-A Z for help on special keys
>
>
>
> 405GP 1.13 ROM Monitor (4/7/00)
>
> --------------------- System Info ----------------------
> Processor = 405GP, PVR: 40110082
> Processor speed = 200 MHz
> PLB speed = 100 MHz
> OPB speed = 50 MHz
> Ext Bus speed = 50 MHz
> PCI Bus speed = 33 MHz (Sync)
> Amount of SDRAM = 32 MBytes
> Internal PCI arbiter enabled
> --------------------------------------------------------
>
> --- Device Configuration ---
> Power-On Test Devices:
> 000 Disabled System Memory [RAM]
> 001 Disabled Ethernet [ENET]
> 004 Disabled Serial Port 2 [S2]
> ----------------------------
> Boot Sources:
> 001 Enabled Ethernet [ENET]
> local=192.0.1.253 <http://192.0.1.253> remote=192.0.1.50
> <http://192.0.1.50>hwaddr=0004ace30f38
> 004 Disabled Serial Port 2 [S2]
> local=8.1.1.2 <http://8.1.1.2>
> remote=255.255.255.255<http://255.255.255.255>hwaddr=ffffffffffff
> 005 Disabled Serial Port 1 [S1]
> ----------------------------
> Debugger: Disabled
> ----------------------------
> 1 - Enable/disable tests
> 2 - Enable/disable boot devices
> 3 - Change IP addresses
> 4 - Ping test
> 5 - Toggle ROM monitor debugger
> 6 - Toggle automatic menu
> 7 - Display configuration
> 8 - Save changes to configuration
> 9 - Set baud rate for s1 boot
> A - Enable/disable I cache (Enabled )
> B - Enable/disable D cache (Disabled)
> 0 - Exit menu and continue
> ->0
> ENET Speed is 100 Mbs...
> FULL duplex connection
> Booting from [ENET] Ethernet ...
> Sending bootp request ...
>
>
> Loading file "/tftpboot/zImage.treeboot" ...
> Sending tftp boot request ...
> Transfer Complete ...
> Loaded successfully ...
> Entry point at 0x500000 ...
>
> loaded at: 00500000 0059E1F8
> relocated to: 00400000 0049E1F8
> board data at: 0049B128 0049B168
> relocated to: 00405470 004054B0
> zimage at: 004059AC 0049A376
> avail ram: 0049F000 02000000
>
> Linux/PPC load: root=/dev/nfs rw ip=on
> Uncompressing Linux...done.
> Now booting the kernel
> Linux version 2.4.18_mvl30-405ep_eval (root@sairam) (gcc version
> 3.2.1200209305IBM Walnut (IBM405GP) Platform
> Port by MontaVista Software, Inc. (source@mvista•com)
> On node 0 totalpages: 8192
> zone(0): 8192 pages.
> zone(1): 0 pages.
> zone(2): 0 pages.
> Kernel command line: root=/dev/nfs rw ip=on
> Calibrating delay loop... 199.47 BogoMIPS
> Memory: 30800k available (1024k kernel code, 332k data, 72k init, 0k
> highmem)
> Dentry-cache hash table entries: 4096 (order: 3, 32768 bytes)
> Inode-cache hash table entries: 2048 (order: 2, 16384 bytes)
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
> Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
> POSIX conformance testing by UNIFIX
> PCI: Probing PCI hardware
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> OCP uart ver 1.2.1 init complete
> Starting kswapd
> Disabling the Out Of Memory Killer
> i2c-core.o: i2c core module version 2.6.2 (20011118)
> initialize_kbd: Keyboard reset failed, no ACK
> Detected PS/2 Mouse Port.
> Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
> SERIAL_PCI edttyS00 at 0xef600300 (irq = 0) is a 16550A
> ttyS01 at 0xef600400 (irq = 1) is a 16550A
> block: 64 slots per queue, batch=16
> RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
> loop: loaded (max 8 devices)
> eth0: Phy @ 0x1, type DP83843 (0x20005c10)
> Reset ethernet interfaces
> NET4: Linux TCP/IP 1.0 for NET4.0
> IP Protocols: ICMP, UDP, TCP, IGMP
> IP: routing cache hash table of 512 buckets, 4Kbytes
> TCP: Hash tables configured (established 2048 bind 4096)
> opening eth0 on emac 0
> eth0: IBM EMAC: link up, 100 Mbps Full Duplex, auto-negotiation complete.
> eth0: IBM EMAC: MAC 00:04:ac:e3:0f:38.
> eth0: IBM EMAC: open completed
> Sending BOOTP and RARP requests . OK
> IP-Config: Got BOOTP answer from 192.0.1.50 <http://192.0.1.50>, my address
> is 192.0.1.253 <http://192.0.1.253>
> IP-Config: Complete:
> device=eth0, addr=192.0.1.253 <http://192.0.1.253>,
> mask=255.255.255.0<http://255.255.255.0>,
> gw=255.255.255.255 <http://255.255.255.255>,
> host=192.0.1.253 <http://192.0.1.253>, domain=, nis-domain=(none),
> bootserver=192.0.1.50 <http://192.0.1.50>,
> rootserver=192.0.1.50<http://192.0.1.50>,
> rootpath=/home/vinod/target
> NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
> Looking up port of RPC 100003/2 on 192.0.1.50 <http://192.0.1.50>
> Looking up port of RPC 100005/1 on 192.0.1.50 <http://192.0.1.50>
> VFS: Mounted root (nfs filesystem).
> Freeing unused kernel memory: 72k init
> Oops: kernel access of bad area, sig: 11
> NIP: C00EB22C XER: 00000000 LR: C00E900C SP: C0121CB0 REGS: c0121bf0 TRAP:
> 0800dMSR: 00009030 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11
> DEAR: 00000000, ESR: 00000000
> TASK = c011fff0[0] 'swapper' Last syscall: 120
> last math 00000000 last altivec 00000000
> PLB0: bear= 0x10000000 acr= 0x00000000 besr= 0x00000000
> PLB0 to OPB: bear= 0x00001024 besr0= 0x00000000 besr1= 0x00000000
>
> GPR00: 00000000 C0121CB0 C011FFF0 C1FD0060 C0121CE8 C0121D08 00000000
> C1FD6000
> GPR08: C0121D60 00000000 00000000 00000000 44000044 00020000 000C0804
> 00000000
> GPR16: 00020000 FFFE21AD C0121D58 C0121D58 00000153 00000001 C1FD5D00
> 00000000
> GPR24: 00000000 C0121CE8 C0121D08 C0121D08 C0121CE8 C1FB0280 00000000
> C1FD6000
> Call backtrace:
> 00000000 C00E900C C00BD16C C00BD280 C00C0124 C00BFC24 C00B115C
> C0017684 C0003BE0 C0002B4C C00215D4 C00040A8 C00040D0 C0002418
> C01317A8 C0002318
> Kernel panic: Aiee, killing interrupt handler!
> In interrupt handler - not syncing
>
>
>
> --
> vinod
> S.S.S.I.H.L
> _______________________________________________
> Linuxppc-embedded mailing list
> Linuxppc-embedded@ozlabs•org
> https://ozlabs.org/mailman/listinfo/linuxppc-embedded
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-06-22 19:49 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-06-22 4:49 booting linux on powerpc 405 vinod b
2005-06-22 19:49 ` vbordug
-- strict thread matches above, loose matches on Subject: below --
2005-06-21 8:13 vinod b
2005-06-21 9:24 ` Eugene Surovegin
2005-06-21 12:42 ` Sam Song
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox